I need help on setting the variables!!!!

I'm using WinXp Pro. where should I put them in the User or System part and what goes in the Variable part and the Value part? The directions are not specific at all. Please help been on the for to many hours want to move on. I think its because of this I can't compile too. Thanks

You should go back to the window where you set the variables and check to ensure that the changes you made were saved. You should also close any open command prompt windows and reopen them after setting variables.
If that doesn't work, you can also try the old-fashioned way on the command line:
set path=%path%;c:\jdk1.3.1\bin
or
set path=c:\windows;c:\jdk1.3.1\bin
etc.
If you do set your variables on the command line, you'll have to reset them each time you open a command prompt window.

Similar Messages

Need help with setting a variable using xml

So I am trying to import in XML and this is working fine, But
once in flash I need to reference this variable in a later script.
Here is what I got.
function loadXML(loaded) {
if (loaded) {
/////this is the variable, which is working, it pulls the
info from the xml document properly.
var node1 =
this.firstChild.childNodes[0].childNodes[0].firstChild.nodeValue;
////another variable, etc...
var node2 =
this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
/////when traced it outputs the proper value.
trace(node1);
////////does not work here though.
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("co.xml");
var latmin = 37;
var latmax = 41;
var lonmin = -109;
var lonmax = -102;
this.geoPlotter_gp.setRange(latmin, latmax, lonmin, lonmax);
this.geoPlotter_gp.setNodeSymbol("geoPloterNodeSymbol");
this.geoPlotter_gp.addNode(40.48, -107);
////////////////This is where I need to now use the variables
defined above//////////////
this.geoPlotter_gp.addNode(node1);// Boulder
this.geoPlotter_gp.addNode(node2);// Denver
/////any ideas all? I am sure this is something simple...I am
just overlooking something.

var node1 is a local variable to the loadXML function and not
visible
outside the function.
Place var node1 on the timeline say in Frame 1 and it will be
visible to all
functions on the timeline.
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"GDrider" <[email protected]> wrote in
message
news:e2p0r5$33i$[email protected]..
So I am trying to import in XML and this is working fine, But
once in flash
I
need to reference this variable in a later script. Here is
what I got.
function loadXML(loaded) {
if (loaded) {
/////this is the variable, which is working, it pulls the
info from the xml
document properly.
var node1 =
this.firstChild.childNodes.childNodes.firstChild.nodeValue;
////another variable, etc...
var node2 =
this.firstChild.childNodes.childNodes.firstChild.nodeValue;
/////when traced it outputs the proper value.
trace(node1);
////////does not work here though.
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("co.xml");
var latmin = 37;
var latmax = 41;
var lonmin = -109;
var lonmax = -102;
this.geoPlotter_gp.setRange(latmin, latmax, lonmin, lonmax);
this.geoPlotter_gp.setNodeSymbol("geoPloterNodeSymbol");
this.geoPlotter_gp.addNode(40.48, -107);
////////////////This is where I need to now use the
variables defined
above//////////////
this.geoPlotter_gp.addNode(node1);// Boulder
this.geoPlotter_gp.addNode(node2);// Denver
/////any ideas all? I am sure this is something simple...I
am just
overlooking
something.

Need help with setting a variable using actionscript

So I am trying to import in XML and this is working fine, But
once in flash I need to reference this variable in a later script.
Here is what I got.
function loadXML(loaded) {
if (loaded) {
/////this is the variable, which is working, it pulls the
info from the xml document properly.
var node1 =
this.firstChild.childNodes[0].childNodes[0].firstChild.nodeValue;
////another variable, etc...
var node2 =
this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
/////when traced it outputs the proper value.
trace(node1);
////////does not work here though.
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("co.xml");
var latmin = 37;
var latmax = 41;
var lonmin = -109;
var lonmax = -102;
this.geoPlotter_gp.setRange(latmin, latmax, lonmin, lonmax);
this.geoPlotter_gp.setNodeSymbol("geoPloterNodeSymbol");
this.geoPlotter_gp.addNode(40.48, -107);
////////////////This is where I need to now use the variables
defined above//////////////
this.geoPlotter_gp.addNode(node1);// Boulder
this.geoPlotter_gp.addNode(node2);// Denver
/////any ideas all? I am sure this is something simple...I am
just overlooking something.

when you prefix a variable using var within a function,
you're making it local to that function. ie, node1 and node2 are
undefined outside loadXML().
to remedy, don't prefix with var.

Need help with setting the entry point for application

Hi there,
I am kinda new to creating JAR files for application. I checked out the tutorials for creating the jar files, and I understood most of the concepts. There is one part in the tutorial which I still don't understand
it says:
We want to execute the main method in the class MyClass in the package MyPackage when we run the JAR file.
We first create a text file named Manifest.txt with the following contents:
Main-Class: MyPackage.MyClass
I am not exactly sure what the package is. Is it the name of the jar file, which I wish to create? Your detailed explanation would certainly be helpful. Thank you in advance.
Regards,
Young

Hi there,
I am kinda new to creating JAR files for
for application. I checked out the tutorials for
creating the jar files, and I understood most of the
concepts. There is one part in the tutorial which I
still don't understand
it says:
We want to execute the main method in the class
s MyClass in the package MyPackage when we run the
JAR file.
We first create a text file named Manifest.txt with
the following contents:
Main-Class: MyPackage.MyClass
I am not exactly sure what the package is. Is it
it the name of the jar file, which I wish to create?
Your detailed explanation would certainly be helpful.
Thank you in advance.
Regards,
YoungIts just the package name in your code hierarchy.
http://jarticles.com/package/package_eng.html

HT5312 I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

Not able to set the variable to the variant in dynamic selections

HI,
I got a ticket related to variant. The variant is created to the report and logical database is added in the attributes of the report so that we can have the option to choose the dynamic slections. Variables are created in TVARVC table. I am able to set the variable by pressing F4 in dynamic selections to the variant. When i save and comeback, i am not able to see the variables in the dynamic selections. I can save the variables in static selections and it is working fine. Pleas help me i need this urgently.

Hi,
maybe sth wrong with the passing of parameters in the value help of the affected field.... Pls check.
BTW: do u pay us for solving your customer tickets? (-;
Cheers,
André

I need help understanding how the Apple components integrate to create a system across all my devices?

I need help understanding how the Apple components connect to create a whole system across all my devices?
Is there a resource that describes current system and associated functionality?
For example:
Buy A, B, C to achieve "X"
You will need:
an internet provider which supports <specs>
add D to achieve "Y"
You will need:
an internet provider which supports <specs>
add "E" to achieve "Z"
You will need:
an internet provider which supports <specs>
For example, I am looking at the Gen 6 Airport extreme. For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice? Do I need the internet provider's modem or does the Airport extreme replace that? And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why? Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel or sit on the couch in my PJs?
If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy.
A "System Configuration App" would be a really great sales tool--Just saying.

I have no idea what "fully optimized" means.
No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
Any Mac computer or iPad will allow you to surf the web.
What business software?
Time Capsule is a good option for back ups.
Update what across all devices?
For accessing documents from all devices, a service like Dropbox is your best bet.
I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
Best of luck.

I need help to remove the wrong email on my Iphone. I can't down load app because my apple ID doese not match with the wrong email please help

I need help to remove the wrong email on my Iphone. the represnter who set up my phone put in the wrong email, and now I can't down loand apps on my phone because the apple ID does not match

So sign out of the Apple ID under Settings > iTunes & App Store, then sign in with your own.

Need help to trace the place where error occuring in Web UI of type System

Hi All,
Need help to trace the place where error occurring in Web UI of type System error,
this error coming while saving the corporate account creation,
error message description : - System error: Interruption in Routine READ TABLE GT_CHAR_VAL, CHAR_NAME = PVTLTD_CLEAN_SEGMENT
System error: Interruption in Routine READ TABLE GT_CHAR_VAL, CHAR_NAME = PVTLTD_CLEAN_CLASS-CP
thanking you.
Best Regards,
VijHyd

Hi Nagaraj,
See that the mandatory SICF setting are enabled or Active in the SICF Services. Follow the steps as below:-
Enter the TCode SICF
Execute the same for Hierarchy Type SICF.
Check the following SAP Note 1295006.
If every thing is Active then, the IC Agent role will open.
Still if it is not opening Let me know.
regards,
Sarangamath

Need help to fit the records of a table into a particular region

Hi All,
Need help in getting the records of table to be fitted into a particular region provided for it. But in my case as the records increases the textbox below are moving down accordingly into next page that i dont want.
As shown in the below image i have to fit 22 no. of records in that given area only not disturbing the below textbox alignments.
Thank in advance...
Sreekanth Note: Please vote/mark the post as answered if it answers your question/helps to solve your problem.*****

Hello,
In SSRS, Report items within a report can be
kept together on a single page implicitly or explicitly by setting the keep with group or keep together properties.
In your case, you can try to specify the "KeepTogether" property to True on the Table properties windows.
If there are other report items under or above the Table and you want keep all items on the single page, you can try to add a Rectangle and put all items into the Rectangle.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Need help w/ setting up ports to run a server for America's Army

Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
Q: How do I run my own server?
A: Quick and dirty server info:
1. Edit RunServer.bat to change the map.
2. Run RunServer.bat
Or:
server.exe LAN MAPNAME.aao (Host a LAN game)
server.exe global MAPNAME.aao (Host a Public game)
Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
[Engine.GameEngine]
ServerActors=Andromeda.AndromedaMBS
[Andromeda.Andromeda]
GameServerIp=
Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
[Andromeda.AndromedaMBS]
QueryPort=20025
Punkbuster user fix correction.
If [Engine.GameEngine] block has been changed to read as below:
[Engine.GameEngine]
ServerActors=IPDrv.AndromedaMBS
Please add the following block to your INI file:
[IpDrv.AndromedaMBS]
QueryPort=20025
(Last Updated: 2006-04-20)

Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

I need help in setting up a wireless connection

I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMay

NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99

Downloaded Epsom printer app need help to set printer up on iPad 3

Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

It's Epson, not epsom. Epsom refers to epsom salt (magnesium sulfate).
... Anyway, iPads don't have printers directly set up. You might interface with a printer over a WiFi. That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

Please help to set the time zone in a porper way

Dear Folks please help to set the time zone in a porper way
select sessiontimezone from dual;
Database: Oracle 11.2.0.2
Operating system: AIX 5.3
SESSIONTIMEZONE
+00:00
SQL> select systimestamp from dual;
SYSTIMESTAMP
06-NOV-12 04.21.07.438426 AM +00:00
SQL> select dbtimezone from dual;
DBTIME
+00:00
SQL> Select DBMS_SCHEDULER.get_sys_time_zone_name from dual;
GET_SYS_TIME_ZONE_NAME
Asia/Kuala_Lumpur
By looking Doc ID: Note:149120.1 in Metalink:
ALTER DATABASE <my db name> SET TIME_ZONE = 'Asia/Kuala_Lumpur'
or
ALTER DATABASE <my db name> SET TIME_ZONE = '+08:00'
For reflecting the change I refreshed the db by shutdown and restart.
but still the returning no timezone value for user schema, please help how to set the time zone in a proper way?

SQL> conn sys/sys as sysdba
Connected.
DBNAME
db
SQL> select u.name || '.' || o.name || '.' || c.name "Col TSLTZ"
2    from sys.obj$ o, sys.col$ c, sys.user$ u
3   where c.type# = 231
4     and o.obj# = c.obj#
5     and u.user# = o.owner#;
no rows selected
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> alter database set time_zone='Asia/Kuala_Lumpur';
Database altered.
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> startup force;
ORACLE instance started.
Total System Global Area 426852352 bytes
Fixed Size                  1375060 bytes
Variable Size             260048044 bytes
Database Buffers          159383552 bytes
Redo Buffers                6045696 bytes
Database mounted.
Database opened.
SQL> select DBTIMEZONE from dual;
DBTIMEZONE
Asia/Kuala_LumpurRefer:
Re: how to check db time zone
Edited by: Ora on 5 Nov, 2012 11:36 PM

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

I need help on setting the variables!!!!

Similar Messages

Maybe you are looking for