I need to reconfigure my E4200...Help!

I have been set out to pasture by the Linksys support staff as I have passed my 90 free tech asstistance period. Now I guess they think I am a cash cow....sorry this cow is unemployed
I had a power outage and now I have a solid Cisco light on the top of the router but I can not get any port light activity on the router. I don't see how I can reconfigure it if the system can not even access it? I feel like a moron right now.....please help me..

Tinytech wrote:
If I could communicate with the router I could upgrade the firmware or reconfigure....but as I stated the cables I am using all checkout fine....I can connect directly to the cable modem to my computer and access the internet with NO issues. The Router will not reset......No port lights.....can not bring up http://198.168.1.1 or http://198.168.2.1 to access the unit.
Ladys and Gentleman I believe we may have a BRICK!
How about checking the power adapter? Make sure it is the correct power adapter. It should have 12V 2A output. If it is correct and same thing is happening, then I can say that the router is defective.

Similar Messages

Do i need to reconfigure my cRIO after updating into 8.5

Hi all,
I used to run my program with 8.2 LabView software . Now i m updating into 8.5 version .
Do i need to change anything or reconfigure my cRIO controller ?
Thank you
Best regards ,
roxy

Hi Roxylat,
For just a LabView upgrade, you do not need to reconfigure your cRIO. However, for future information, you do need to reconfigure the cRIO in any of the following circumstances:
1. You change the versions of either NI-RIO, NI-VISA or Real Time.
2. The NI-RIO versions on your controller and your PC are not the same.
Hope this helps.
Ipshita C.
National Instruments
Applications Engineer

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

Because you can only synce with one iTunes library and you are switching libries by using the new computer. To nake this yyour syncing computer:
- Move all the media(apps, music, synced video and photos etc) to the new computer.
- Connect the iPofd yo the computer and bake a backup fo the iPod by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the backup that iTunes makes doe not include media.
To move mdia to the new computer see:
iTunes: How to move your music to a new computer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer

I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

So just to be clear, when you say "just bought" how long ago was that? Is it on this new iPhone that you had pictures, texts, etc that you want? Were you backing up to iCloud or onto iTunes?
This may not help for everything but if you go to iCloud.com and log in, are you able to find your pictures there?

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
     If yes, have you tried unplugging and re-plugging both ends of the printer cable?
     If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
     Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently?

HT4208 I just need a little bit of help. I visited the american ap store looking for the new scrabble game which is not available in the australian ap store. Can't get it anyway as I don't have an account there. I am trying to get back to the australian a

I just need a little bit of help. I visited the american ap store, using my i phone, to check out something. I dont have an account with them so I couldn't get what I wanted anyway.Now, I need to get back to the australian store and I don't know how to do that. Please help!

Go to app store- scroll down to bottom- click on apple id- change country

I made a big mistake in purchasing ringtone Edited by Host ASAP; I'm afraid that my card will be charged a lot; please call me...I need a live person to help me on this matter

I purchased 2 ringtones in "i tune store", but i think i made a big mistake; please help me because Im afraid that i will be charged a lot; <Edited by Host> ; i need a live person to help me.
Catherine

These forums are not moderated by Apple, we are all Users like you.
Posting your personal phone number here is a terrible idea. I'll report your post to have a moderator edit out the sensetive info.
As to your actual concern, you can use iTunes Support, which also will refer you to THIS article (http://support.apple.com/kb/HT1933 about reporting issues with iTunes purchase

I have QuickTime Player 7.6.8, I cannot update or remove it b/c I am missing QuickTime.msi file. It is gone and I need it back. Please help.

I have QuickTime Player 7.6.8, I cannot update or remove it b/c I am missing QuickTime.msi file. It is gone and I need it back. Please help.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

HT4097 My ipad and mini pad won't update though it says several apps are in need of update. Please help!

My ipad and mini pad won't update though it says several apps are in need of updates. Please help!

Try updating from here:
App Store>Purchased
Note: You'll have to look out for apps that need update.

Do i need to reconfigure OEM Database Control when change ip address?

Hi all.
Do i need to reconfigure OEM Database Control after a change of ip address?
I mean, i have an OEL5 box with 10g Rel2. I have configure the server with a static ip address.
This server will be sent to another location and it's possible the ip address will be changed. It will remain a static ip, but may change. Since i plan to deliver this server with rman jobs within OEM Database Control. I'd like to know if this will continue working after an eventual ip address change ....
Regards....!

myluism wrote:
Hi all.
Do i need to reconfigure OEM Database Control after a change of ip address?
I mean, i have an OEL5 box with 10g Rel2. I have configure the server with a static ip address.
This server will be sent to another location and it's possible the ip address will be changed. It will remain a static ip, but may change. Since i plan to deliver this server with rman jobs within OEM Database Control. I'd like to know if this will continue working after an eventual ip address change ....
Regards....!It depends.
When you created the dbcontrol, the configuration was put in a directory in ORACLE_HOME named something like 'hostname_sid' and there are also files under that where the hostname is baked into either the file name or a property of a configration defined within a file. If it is truly hostname, you might be ok, but if it is actually IP address instead of host name (I have seen that) then you obviously have a problem.
Over the years (and across several versions) I've found the OEM repository to be rather "brittle", and Oracle to have a rather cavalier attitude about rebuilding it. As a result, I specifically DO NOT have anything important - and very specifically my backup jobs - in the repository. I still schedule my backups through rman, though I know many people use dbms_scheduler. But even that appears to not be the same as an oem controlled schedule.

HT1386 I have an nano - no clue how to sync it after everything downloaded. HEEEEEELP! I need a smart person to help me. :)

I have an nano - no clue how to sync it after everything downloaded. HEEEEEELP! I need a smart person to help me.

You might have better luck in the iPod Nano forum at https://discussions.apple.com/community/ipod/ipod_nano?view=discussions

HELP needed !!! pleace help !!

I have a problem. this is the site (
http://home.planet.nl/~onbe1102/prikbord.html
its a flash site and when i click to the name buttons i would
like to open a *.XLS file or a site.
the action fore the buttons ar now:
btnWilliam_mc.onRollOver = function() {
btnWilliam_mc.gotoAndPlay("_over");
btnWilliam_mc.onRollOut = function() {
btnWilliam_mc.gotoAndPlay("_out");
btnArnold_mc.onRollOver = function() {
btnArnold_mc.gotoAndPlay("_over");
btnArnold_mc.onRollOut = function() {
btnArnold_mc.gotoAndPlay("_out");
btnAbal_mc.onRollOver = function() {
btnAbal_mc.gotoAndPlay("_over");
btnAbal_mc.onRollOut = function() {
btnAbal_mc.gotoAndPlay("_out");
pleace help !!! what am i doing wrong????
HELP needed !!! pleace help !!

You need a command that tells the button to open something
btnAbal_mc.onRollOut = function() {
getURL("name.xls or what ever", "_blank");
The rollover and rollout are animations and you needed to
tell the buttons to do something. Hope this helped

Finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

Press F1 within the application to open the Help section.
If you have specific questions ask them in the Acrobat forums (this is the Reader forum).

I have a macbook 13in mid 2010, im trying to update it from 10.6.4... i update it and restart i but when it finishes restarting, it says its still 10.6.4 and i need to update? please help!

I have a macbook 13in mid 2010, im trying to update it from 10.6.4... i update it and restart i but when it finishes restarting, it says its still 10.6.4 and i need to update? please help!

Try downloaded the Mac OS X 10.6.8 Update Combo v1.1 standalone updater and installing it.

Just updated the lion os x, and now when I try to use my optus dongle, it comes up with the message saying that it won't work because Java Runtime needs to be installed. Help?

just updated the lion os x, and now when I try to use my optus dongle, it comes up with the message saying that it won't work because Java Runtime needs to be installed. Help?

Have you run Software Update. You have Java already installed, but it needs to be updated.

I need to reconfigure my E4200...Help!

Similar Messages

Maybe you are looking for