I recently downloaded is x mountain lion and while it finished it erased all my data, some of which I need. When using disk utility I found my old data but it says corrupted. I can't repair and while restoring the error code 32 Broken Pipe appears. Help?

My data I need is on my computer but it needs to be repaired but can't and when I try to restore it/back it up it ends abruptly with error code 32 broken pipe.
It was damaged while installing os x mountain lion and I found my data on disk repair (utility)

Sounds like your hard drive is badly corrupted, likely due to problems that were already there when you started trying to install Mountain Lion. The problem is, if you don't have any backups already, you may not be able to recover all your data from this state. Do you have backups of that data already?
If not, I assume when you say that "it needs to be repaired but can't," you mean that Disk Utility tells you there is a problem with the disk, but that it is unable to repair it? If so, you can try repairing the drive using DiskWarrior, which can repair problems that Disk Utility cannot. That may give you access to your data again, but may not.
Also, it's important to understand that if your data is not backed up, everything you do with the computer runs the risk of overwriting or corrupting that data. You may want to go straight to trying to recover your data. See Recovering deleted files.
Regarding the error code, if you're trying to back up the drive using Disk Utility's Restore tab, note that that is often not successful when the drive you're trying to back up is corrupt.
Once the situation is resolved - either because you have backups, are able to recover your data files or are forced to accept that they are gone permanently - you will need to erase the hard drive and reinstall the system and all your apps from scratch.

Similar Messages

I have recently downloaded OS X Mountain Lion on my new MacBook Air.

I have recently downloaded OS X Mountain Lion on my new MacBook Air.   I have Safari 6.0. I no longer see the "Empty Cache" option on the Safari drop down menu. Where did it go? How can I recover it?
Gloria

Safari 6
Mountain Lion comes with Safari 6.
Apple removed "Empty Caches" from Safari menu.
1. Now clearing history clears caches and favicons.
2. Enable Develop menu.
     Safari > Preferences > Advanced
     At the bottom check the box "Show Develop menu in menu bar".
     Develop menu will appear in menu bar.
     Click Develop and from the dropdown select "Empty Caches".
Best.

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server.

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.

Try this as a first step; 
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"''''' 
and 
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"''''' 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
While you are in safe mode;
'''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''.

Can't press apply button when using disk utility to make a new partition

Hey guys,
It might sound silly but when I use disk utility to divide my hd without deleting my files the apply button stays blank, it doesn't allow me to press apply, can anyone help me with this?
Thanks in advance

Hi Tom,
Of course, that makes perfect sense! When I made my last disk image backup, my PowerBook had a serious, undiagnosed problem and I had booted from the startup disk to have a current backup of everything before I sent it off for repair.
Thanks for your help.
Rick

It says it needs to be connected to itunes and restored. when i do that, it goes through the whole process then comes up with "iphone could not be restored. unknown error code (-1)". Please help

My brother gave me his old iphone when the touch screen went out on mine. It's in great shape but when I received it, it says that it needs to be connected to itunes to be restored. I have done this and it goes through the whole process then says iphone "iphone" could not be restored. unknown error code (-1). There is not a -1 code on the list and I have tried most of the suggestions.
Does my sim card need to be in when I am doing this? And any other suggestions?

I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.

HT201441 Need to erase my old iphone but... It's locked (I don't remember the pass code#, it is not connected to wi-fi or cellular #so I can't erase from my icloud). Help??

I need to erase my old (unused currently) phone so my kids can use it on wi-fi and play games but it's locked & I don't remember the pass code. Any one know how to erase it and start over without the pass code.
PS it is not currently connedted to wi-fi so the simple "erase device" using iCloud won't work.

Here is a guide how you could reset your iPhone via iTunes, if you cannot remember the passcode: http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

How can I repair my OS X Boot Disk without a Recovery Partition (Using Disk Utility)

Hey there,
I recently found that my OS X boot partition is corrupt (using DU's "Verify Disk" function). I would like to repair it using Disk Utility, but that would require me to boot from the Recovery Partition, which is a problem...
I have Ubuntu installed on a separate partition on my internal hard drive (using a Hybrid GPT - MBR Setup). Because of this, the Mountain Lion Installer wasn't able to install the Recovery Partition.
What is the best way to get Disk Utility to repair the disk in this situation. I know that I could boot another OS X install from an external hard drive and use that to repair the disk. This is a bad option for me because I don't really have a spare external hard drive that I could use (or partition)... Other than that, I'm clueless
Thanks in advance

Unless you install Mountain Lion properly you'll not have a Recovery HD partition. Your options are to install Mountain Lion on another drive from which to boot the computer should you need to use Disk Utility. Or you can try this:
Boot into single-user mode. After startup is completed you will be in command line mode and should see a prompt with a cursor positioned after it. At the prompt enter the following then press RETURN:
/sbin/fsck -fy
If you receive a message that says "***** FILE SYSTEM WAS MODIFIED *****" then re-run the command until you receive a message that says "** The volume (name_of_volume) appears to be OK." If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way. If you were successful then enter:
reboot
and press RETURN to restart the computer.

How can I install CS5.5 updates after error code U44M1I210?

When I attempt to update CS5.5 I get a message saying that several updates were unable to be installed. Error code U44M1I210 is given. I've unistalled all of CS5.5, reinstalled CS5.5, and tried to install the updates again, but with no success. How can I get the updates to be installed?
I'm running Mac OS 10.6.8.
Thanks in advance,
John Link

_techkid123_ wrote:
Hi
There is an online aticle which i was able to locate
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-up dates-ccm.html
Thanks
Thank you. I've followed the advice in that article, have sent a package to Adobe for them to analyze, and am awaiting a response.

HT1719 When I try to drag a song to my shuffle it says "this song is in iCloud and can't be transferred. Why and what is iCloud I havsn't downloades any such thing. Help me get back to the old and simple way of transferring my songs!!!~

When I try to drag a song to my shuffle it says " this song is in iCloud and can't be transfered. Why is it ? I never downloaded anything like iCloud. I just want to be able to move my music where and when I waNT TO. i HAVE BEEN UNTILL i DOWNLOADED NEWEST VERSION OF ItUNES. gET ME OUT OF THIS!!!

thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
Message Edited by bleakreserve on 02-3-2005 06:34 AM

Hello- I recently upgraded to OS Mountain Lion on my iMac and cannot download the most current version of Adobe Flash Player. Please help!

Hello- I recently upgraded to OS Mountain Lion on my iMac and cannot download the most current version of Adobe Flash Player. I even uninstalled the old Flash version but this did not resolve the issue. Could somebody please assist? Thank you.

Hello- I was able to resolve the issue after clicking on the top right hand corner that shows the recent downloads (it has that down arrow). I realized that I had tried downloading the Adobe Flash Player Install Manager about 7 times, but still needed to click on the file and install! So I erased all the duplicates and installed one of the Flash Player Install Managers and it finally worked! Yay!

Ever since I downloaded OS X Mountain Lion on my iMac, the Safari won't often (most of the time) and I have to restart to open a web page. What is going on? What can I do?

Ever since I downloaded OS X Mountain Lion on my iMac, the Safari won't open. It loads half way and then stops. Same thing happens when we try to open a web page. If I restart the computer, it will then work. What is going on? What can I do? Help!

It will but it's only a temporary fix, ideally you should get a large external drive and move your photo library to it, do this (info)
Apple Menu>About This Mac>More Info>Storage, you will get a graphic that looks like the one below, post it here.

I had downloaded OS X Mountain Lion and had to replace my hard drive. Now when I try to download it only wants to upgrade since I show that I previously purchased it. What can I do to get the operating system back

I had downloaded OS X Mountain Lion and had to replace my hard drive. Now when I try to download it only wants to upgrade since I show that I previously purchased it. What can I do to get the operating system back

I'm unclear on what the problem is. Have you installed a system on the new hard drive, and if so, what system? Had you actually installed Mountain Lion previously, or only downloaded it? And what does "it only wants to upgrade" mean? Have you actually got Mountain Lion already installed? (See About This Mac in the Apple menu.)
All Macs that shipped with Lion or newer are capable of internet recovery in situations like this. Just hold down command-R and it should start in recovery mode over the internet if necessary. You can reinstall the system from there. If you had Mountain Lion, I would assume that Mountain Lion would be the system you would get reinstalling that way.

Why does the App store say 'download' to OSX Mavericks when i have already downloaded the update, and restarted the computer? I can't find Mavericks icon on the dashboard or launchpad either! Help!

Why does the App store say 'download' to OSX Mavericks when i have already downloaded the update, and restarted the computer?
I can't find Mavericks icon on the dashboard or launchpad either! Help!

It sounds like you've installed Mavericks. You can confirm this by clicking on the Apple located at the top left of the screen and choosing "About This Mac" from the menu. You should see a window appear with the text "Version 10.9.1" near the middle.
If it says "Version 10.9.1", then you've installed Mavericks. It still says "Download" in the App Store because you can still download the operating system after installing it. This is useful if you want to download it for a friend, or create a USB boot drive.
Morgan

I downloaded itunes, but it says I have an audio problem and can't play the game I purchased, any ideas?

I downloaded itunes on my pc, but it says I have an audio problem and won't let me play the game I purchased, any ideas?

Why do you assume that this problem is a "bug" that Apple has to address, and not a problem with your phone, that you need to address. Do you see others having this specific problem?
Try:
1. Reset phone (no data loss): press both the home and power buttons for at least 10 seconds, releasing when the Apple logo appears
2. Install using iTunes on your computer/

Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message that X11 was not supported and directed to a sited to download XQuartz. Now when I try to launch WordSearch9 I get a message "X11 cannot be found.

Since downloading OS X Mountain Lion my WordSearch9 will not open. I got a message saying that X11 was not supported and directed to a site to download an update "XQuartz" which I did. Now when I try to launch WordSearch9 I get a message "X11 cannot be found". I did follow the instructions to download and install XQuartz, but there still seems to be a problem. Anyone have an idea?

Your report indicates Mountain Lion, but your footer indicates Lion. I'll assume you're on 10.8.2; on the current Mountain Lion version.
Rebooting is fine.
The posted diagnostics look like there might be a problem with the Xquartz install, or it is not starting, or it's not authorized for the sandbox. (But I don't know enough about that to be certain.)
Try launching X11.app directly from your Applications > Utilities folder, and see if that works, or if shows any dialog boxes, or that reports any errors.
If you had an Xquartz kit installed and it's not the 2.7.4 (current) Xquartz kit, then please update to that version. (I'm assuming that site is where you got your Xquartz kit from, too.)
I'd also suggest also discussing this more directly with the Xquartz folks via mailing list or the IRC channel, or collecting up the Xquartz logs and then posting a bug over at the Xquartz site; here are the details on bug reporting for Xquartz.

I recently downloaded is x mountain lion and while it finished it erased all my data, some of which I need. When using disk utility I found my old data but it says corrupted. I can't repair and while restoring the error code 32 Broken Pipe appears. Help?

Similar Messages

Maybe you are looking for