I recently put an an SSD hard drive and now whenever I open my computer to Safari or Apple homepage or any site- it says I am offline for about a minute- why?

I recently had an SSD hard drive installed when my original one died. Now whenever I open my Mac book Pro- it says my computer is offline for about a minute then it connects to my Apple.com homepage. Any suggestions? I use Mavericks.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Similar Messages

  • I installed a new hard drive and now can't open Adobe Photoshop Elements - what do I need to do?

    My hard drive on my iMac crashed 2 wks ago, and I now have a new SSD harddrive. I had an image of everything from my old hard drive, but Elements won't open. What to do?

    Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
    1. Revert back to Snow Leopard.
    2. Purchase FCP X... 
    if you can't stand FCP X
    3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
    I just got FCS 3 today through apple phone sales..

  • HT1229 Tried moving my library to an external hard drive and now when I open iPhoto, there are no pictures there!!!!

    I am using iPhoto '08 and moved my library to my external hard drive exactly as all the instructions online explained how to do.  I renamed the original "iPhoto Library.old" and ,y external hard drive shows a iPhoto library using the same amount of memory as what it shows on my internal hard drive.  Here is where is becomes a problem.  When I hold the option key and open iPhoto, the only box that comes up does not give me a list of libraries to choose from.  It give me the option to "Create new library" or "choose existing library". When I click "choose existing library" I can find the copied library on my external hard drive but when I open it, iPhoto shows No Photos.  When I have tried opening the original iPhoto Library (the exact same way using the option key and choosing library) that I have not done anything to, except rename it, it does the exact same thing: No Photos.  Both my internal and external hard drives show about 137 GB of space being taken up by photos but I can't access them.  My other big problem is that ,y internal hard drive is completely full, which is why I am trying to transfer them to an external, to free up space so I am very limited on what I can do because I have no free space.  Also, when I open iPhoto and try to go to the Preferences to change to path under advanced settings, it freezes and I have to force close it. 
    Ay advice would be greatly appreciated as I am getting stressed out that I can't open my thousands of photos!

    My guess is that the library has been corrupted from being run on an overfull HD.
    So, try rebuild the Library on the External
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. 

  • I installed on my computer the other SSD hard drive, and now'd like to install Photoshop and Lightroom that station and I do not the C drive. How do I get exchanged the installation location when using your Creative Cloud in your program.

    Photoshop is installed on your C partition and how to get it installed on another partition now!

    Heinonen Petri you can customize the installation location within the preferences for the Creative Cloud desktop application.  Please be aware that the Creative Cloud desktop application and many shared components will always need to be installed to the primary drive containing the operating system.
    For additional details on how to customize the installation location please see Creative Cloud Help | Download, install, update, or uninstall apps.

  • I used my ipod as a hard drive and now its not opening?

    i had synced some 15 gb music onto my 120 GB ipod for a holiday .
    In my holiday i took some 5 gb of photos which i decided to backup on my ipod. So i put the Ipod to USB into the computer, the ipod device opened from my computer icon, and i copied and pasted the photos
    Now, when i try to open my ipod from my computer, and i click on the photo folder, i get a message, please insert disk into drive E. I get the same message if i try to open any folder. All the folders in the ipod show 0 KB. The ipod playlists of music have dissapeared.
    But they ARE there, because the pie chart on my computers, ipod icon shows 20 gb used in 120 gb. So how do i access this photo data.

    Not sure why it's happened, but you could try resetting the password. These instructions work for Lion & Mountain Lion. If you're on Snow Leopard you'll need to use the install disk that came with the Mac.
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

  • I used an external hard drive and now I cant open my iPhoto.

    It's saying I dont have permission to write to the library directory... whatever that means.
    So I have used up all of my space on my computer w pics I suppose so I bought a Seagate 1TB external hd to back up my computer so I could then delete pics without losing them permanently. Well now when I go to open my Iphoto this message pops up, I push cancel or ok (only one option but I dont remember which one), and it closes out of the application. The message reads as follows:
                                Unable to write to Library "Iphoto Library"
                                Check that you have permission to write
                                 to the library directory.
    What can I do do fix this or am I doing something wrong?
    Thanks!
    Holly Mae
    <Email Edited by Host>

    what format is the extrnal drive? For the iPhoto library it must be Mac OS extended (journaled)
    How did you move trhe library to it?  The correct way is
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • I have about 130 gigs of movies on my iTunes and was wondering if I can just put them on my backup hard drive and remove them from my main computer to free up the space

    I have about 130 gigs of movies on my iTunes and was wondering if I can just put them on my backup hard drive and remove them from my main computer to free up the space.

    I haven't done this with an external drive, but I would imagine it works the same way as if you have multiple internal drives.  Also hopefully it works with less headache in OSX than in windows.
    Anyway, move all your music over to your external, and then go into itunes -> preferences -> advanced -> iTunes media folder location.  Navigate to your drive, and pick the folder you want.  Ensure that your folders are set up like they are in your ~/Music/iTunes folder, or wherever your iTunes is currently pointing.  Then quit and restart itunes.  If your music doesn't show up, try dragging your music folder from your external onto itunes, and it will hopefully update your library.xml.
    As far as Jerry's problem goes, you could try adding another music folder to your library.xml, but I really have no idea whether this will work or not.  If you want to give it a try (can't promise you won't corrupt your library.xml, so make a copy beforehand) you can find the music folder xml element right near the top of the xml file (open it with textedit/textmate/whatever text editor you want (NOT WORD)).  Curious to know if this works, and if it doesn't I have other ideas so let me know.

  • HT1473 I recently had to replace my hard drive and lost my iTunes library. Now I cannot transfer the library from my iPod to iTunes on the new hard drive (same computer). How can I complete the transfer?

    I recently had to replace my hard drive and lost my iTunes library.  When I try to transfer the content from my iPod to iTunes on the new hard drive (same computer), it would only let me transfer iTunes store purchases. How can I complete the transfer of all the content on the iPod back onto the computer?

    Recover media from iPod
    See this post for options on moving your iPod data back to your computer.
    tt2

  • We have an early 2008 imac and we realize it is not long for this world but we would like to get a few more months out of it until we can afford a newer one. Can we put in a larger hard drive and add some memory?

    Would it be worthwhile to put in a larger hard drive and boost the memory on our early 2008 iMac? We realize it is on borrowed time but we would like to squeeze a little more time out of it.

    Problem description:
    This iMac is running awfully slow, and freezes up often
    EtreCheck version: 2.1.5 (108)
    Report generated December 20, 2014 at 1:40:32 PM CST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      iMac (24-inch, Early 2008) (Verified)
      iMac - model: iMac8,1
      1 2.8 GHz Intel Core 2 Duo CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR2 SDRAM 800 MHz ok
      BANK 1/DIMM1
      2 GB DDR2 SDRAM 800 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI Radeon HD 2600 Pro - VRAM: 256 MB
      iMac 1920 x 1200
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 21:42:10
    Disk Information: ℹ️
      Hitachi HDP725032GLA380 disk0 : (320.07 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 319.21 GB (204.84 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Logitech USB Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) [Support]
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Support]
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Support]
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) [Support]
    Startup Items: ℹ️
      HP IO: Path: /Library/StartupItems/HP IO
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [running] com.seagate.SeagateStorageGauge.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [running] com.memeo.Memeod.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.leadertech.PowerRegister.EPS2.fa8d34509cfddcea6fdfd2f145193825.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      DirectorShockwave: Version: 11.5.0r600 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 537 - SDK 10.9
    User internet Plug-ins: ℹ️
      BrowserPlus_2.9.8: Version: 2.9.8 [Support]
      Move-Media-Player: Version: npmnqmp 071505000006 [Support]
    3rd Party Preference Panes: ℹ️
      BrowserPlus  [Support]
      Flash Player  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Destinations:
      FreeAgent GoFlex Drive [Local]
      Total size: 1.00 TB
      Total number of backups: 1
      Oldest backup: 2014-06-08 05:27:16 +0000
      Last backup: 2014-06-08 05:27:16 +0000
      Size of backup disk: Excellent
      Backup size 1.00 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          2% WindowServer
          2% com.apple.WebKit.WebContent
          1% fontd
          0% AppleSpell
          0% aosnotifyd
    Top Processes by Memory: ℹ️
      292 MB Safari
      219 MB com.apple.WebKit.WebContent
      180 MB mds_stores
      150 MB softwareupdated
      120 MB installd
    Virtual Memory Information: ℹ️
      1.61 GB Free RAM
      1.86 GB Active RAM
      277 MB Inactive RAM
      543 MB Wired RAM
      626 MB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 19, 2014, 03:58:57 PM Self test - passed

  • Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

    Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

    If you are trying to recover photo stream photos, they are only held in iCloud for 30 days.  All you would be able ro recover is photo stream photos from the last 30 days.
    If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll.  Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083.

  • My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

    My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

    While we all have MacBooks in this forum most of us don’t use iCloud. There's an iCloud Support Community where everybody uses iCloud. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/icloud/icloud_on_my_mac

  • I lost my images from my hard drive and now I can not access them in Lightroom. What can I do?

    I lost my images from my hard drive and now I can not access them in Lightroom. What can I do?

    Your images are truly no longer present on the hard drive(s)? Have you had your operating system do a search for them?
    If such a search fails to find them, here's what I would do, in order
    Look in the trash can/recycle bin
    Restore from backups
    If you don't have backups ... well, why not? ... find a program on the internet called an "undelete utility" (free versons are available) and then download and install it and run it. If you are going to do this, then do not perform any other tasks on your computer except find the program, download it (if possible to a different drive than the photos were stored on), install it (if possible to a different drive than the photos were stored on), and run it. In the future, you will need to commit to making regular backups of your photos and of your Lightroom catalog file, no excuses.
    If that doesn't work, but the thumbnails still appear in Lightroom, you can probably recover the thumbnails from Lightroom via a plug-in, but these would be low-resolution versions of your photos, if you really need instructions on this step, write back

  • Music on hard drive, replaced hard drive and now library won't match up

    I put all my cd's on a hard drive (9000 or so songs) and had a hard drive failure, so I moved all the songs to a new hard drive and now I can't use the Itunes library to connect with that hard drive, except one song at at a time.
    Is there any way to get these two to communicate?
    David

    Is the rest of your music located in a different folder? You'd need to know where those files are in order to add them to iTunes. If you're not sure of their location, try a Spotlight search. Are you not able to locate the files to add them to iTunes, or are you selecting them but they are not appearing in the iTunes library?
    I have all the actual music files located on a external hard drive, but the itunes file name(s) are located on the computer. The problem started when I got a new computer and switched all the stuff over, and then got a new hard drive because the old one was making noises. I copied one hard drive directly over to the other and now am trying to connect the two so they talk together.
    The fix you sent me semed to work great until I noticed that I did not have any music after the letter "a" (namely 1/36 of the music). I ried it again with another copy I had and lost that too. Now, I am working with the copy I had on the other computer, which doesn't have all the data, but does have most of it, and I can survive adding the other stuff later somehow by re-copying the music and getting the data over again, but I do want to somehow get the other 35 letters worth, if possible.
    David Molony

  • Was advised to delete system configuration file from hard drive and now computer will not start - any help would be appreciated.

    Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.

    Boot the MBP with the OPTION+COMMAND+R keys down.  The result should be a display showing a revolving globe.  By following the instructions, you will be able to reinstall the original OSX.  Then you may reinstall Yosemite.
    A solid Internet connection will be required.
    Ciao.

  • I had to erase my hard drive and now when I try to sync the I phone or Ipad it says I will loose my data on the iphone or ipad .  how can I sync the phone or I pad without loosing my music ?

    I had to erase my hard drive and reinstall ox snow leopard.  when i try to sync my Iphone or Ipad it says that my device was synced with another computer and I will loose my songs on the Iphone or ipad and it will be replaced by the library that is on my computer now.  The library is empty since I had to erase the hard drive.  Can anyone help?

    1) ensure iTunes is authorized for your iTunes store account(s)
    2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    3) sync the device
    iTunes will wipe the iPhone/iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone/iPad with it.
    above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
    also, there are PhoneView and iRip.

Maybe you are looking for

  • Can a pdf have problems when created with multiple PDF versions?

    In our everyday workflow, we have PDFs created from different versions.  Our main files are created as PDF v1.5, but then we might import pages created from another software that is v1.3, then we might scan and add a page that is created as v1.6.  Ha

  • No clue how to start mail

    Okay, I am brand new to macs, been on PCs my whole life and I don't know how to get past the first screen of the mail program just to set it up! When it gave choices for the account type I clicked exchange account because I have a gmail address and w

  • DS 5.2 Solaris Sparc version

    I installed DS 5.2 on Solaris 8 platform. I followed the instructions in the documentation for use with kerberos plugin . Ldapsearch queries work fine, except when I attempt to specify using the GSSAPI mechanism. Then the server crashes with a core d

  • Does Contribute allow you to publish files at a later date?

    I know that you can save as a draft, but I am looking for something that can automate the process for me. For example, I update a page today that needs to be automatically published in three days. I don't see that Contribute will do this. Does anyone

  • SNTP Settings gone!

    I have suddenly become unable to send e-mail. The error message "unable to connect to SMTP server" comes up. However, when I check my SMTP settings by checking "edit server list" nothing appears other than the (correct) server name. (In my case, mail