I started to delete my sparseimage file, but stopped it after it deleted 8 of 27k files. After rebooting, I can no longer log into the computer. It says that there is an error with FileVault. Please advise
Also, I have a time machine back up on an external drive, but im hesitant to use it. I have some VERY important photos that are not axles up. Does anyone know if unbacked up data is erased when you restore from time machine? I have already tried the disk utilities to repair the drive and the drive permissions.
Next step:
If I use the lvclass directly in my application, IT WORKS with remote debugging:
If I use the same class in compressed lib, it does not work:
(then error ocuures as described above)
Any Idea?
I have tried several property values of the compressed lib:
-"Fehlersuche aktivieren" ic checked (enable debug)
-no excludes (unchecked remove Typedefines...)
BTW: It does not update the version number of library. I set checkbox to automatically increase version number, but when I insert this lvlibp into small app, and open properties of this lvlibp, it tells me version 1.0.0.0
I have attached Source Code of small application using lvlibp library (MidSmallUsingClasses)
and of lvlibp project itself (TestClass)
Please help me: try to build, include in some application as packed library and remote debug.
Thank you in advance.
Please help me.
Eugen Wiebe
Bernstein AG
CLAD - Certified LabView Associate Developer
Attachments:
MidSmallUsingClasses.zip 194 KB
TestClass.zip 148 KB
Similar Messages
-
hello i have a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.
http://support.apple.com/kb/HT1808
-
Hi, i have tried to update itunes in the normal way as when i opened it, it said that there was an update available. However it would not let me saying that the was a mobile device error. I have unistalled and reinsatlled it and I am still getting the same error. Does anyone know how I can fix this?
You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.
-
So when I went on today, my iPod said that it had a problem with iCloud. So, I hit ignore. Nothing happened. I tried a million times, but no luck still. How can I fix this?!
iCloud: Troubleshooting creating backups
Then as necessary:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
when I plug my ipod into my pc it says the latest iOS is 4.2.1. I've tried restarting the ipod, updating itunes etc. but nothing is working.
Did you check your model here?
Identifying iPod models
Or by entering your serial number here?
Klantenservice: Serienummers -
HT201263 i do all this process but it keep saying thats there is an error (9) with the device
i do all this process but it keep saying thats there is an error (9) with the device
See this support document for help with restore errors. http://support.apple.com/kb/TS3694
-
I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error
carriinna wrote:
I am trying to put the files from my mac onto a seagate backup plus slim portable drive but as soon as I plug the hard drive into my laptop, a notification comes up saying that there was an error
What kind of error. What does it say?
Ciao. -
I just got an iPod 4th generation and Im trying to sync my iTunes songs and books from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. I have already tryed uninstalling all Apple Inc. programs on my laptop then trying to install iTunes again but that has had no success what so ever. I have started to get very frusterated with this . Hopefully someone can help. I would really appreciate it. Any suggestion?
So I tryed to download it on the apple website but it keeps saying that there is an error.
What does the error message say? (Precise text, please.) -
So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything. Thanks
There is a backup plan after doing the Restore. Read this.
-
When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
hi my iphone is broken. it won't pass the connect to itunes. when i try to restore is says that there is an error. please help!
thanks,
jg2013
<Subject Edited by Host>Hello, 02633.
Thank you for visiting Apple Support Communities.
If your iPhone is disabled, you will need to process the steps in the article below.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
Jason H. -
I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I just tried to install Photoshop 4.0 to my iMac (version 10.9.3) and I was informed that there was an error with the software. I could not install it. Where do I go from here?
Photoshop 4.0 is not compatible with MAC 10.9.3 . You will face issues as when Photoshop 4.0 was launched there was no MAC Mavericks and Adobe has not tested the version on new MAC OS.
If you want you can download the latest version of Photoshop CC 2014 and you can use it as a trial for 30 days and you can plan to switch to the latest version.
http://www.adobe.com/products/photoshop.html -
I was downloading the software update for ipod touch 2gen and after it was done downloading it showed that there was an error with my ipod and when i saw it was on the lockscreen loading. its been like this for 4 hours already
What did the error message say?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
help!! i am trying to downgrade my ipod but it won't let me it keeps saying that there is an error.
That is because Apple does not support downgrading the iOS.
Maybe you are looking for
-
My iMessage in my friends's phone!!!
My friend used my Apple ID to download an application in her phone. Later on all my iMessage appear in her phone, how can I stop that!?
-
Crystal Reports for Enterprise and universe connections
Hi, I have noticed an issue with Crystal Reports for Enterprise that may give many administrators a headache. If a BOBJ user has access to a sensitive universe (eg HR or Finance data) to run pre-built WebI reports from (but not create new ones or ed
-
How do you quickly look in Old Mail for a particular sender?
I'm using Firefox, with AOL within it as my email default. If I run AOL by itself outside of Firefox, it works fine and allows easy searching for a known sender in Old Mail using the "Quick Find" feature in AOL's Mail Box How can Firefox be setup to
-
Payment Term Issue while cancellation of Invoice.
Hi, A sales order is created with a Payment term "xxx" which has 2 days credit limit for the customer for Payment. and Billing is done for the same for Example on 16th Feb 10, and the Due date captured on Billing document and as well on accounting d
-
NW 2004S and ECC 6.0 - ESS Quota Overview does not simulate
Dear all, we are upgrading from 4.6C to ECC 6.0 and from the standalone ESS solution to the ESS in EP NW 2004s. In the old ESS we used service pz09 which allows EE's to simulate their future absence quota. In the new ESS in EP we are testing the appl