I think my hard disk is cooked

I have a pavilion dv6 notebook that i bought 10 months ago.  I was getting a message that the hard disk was in trouble.  I made the recovery disks and tried to use the recovery manager to reset the laptop to its original settings.  That worked and the computer is back to its original condition but doesn't run that way.  I still get the message to back up all of my files because the hard disk may be damaged.  Is there anything I can do or is my hard disk cooked?

hi,
run Hard Disc Test from Bios to ensure its HDD problem
regards.
click on Kudos if i helped U

Similar Messages

  • I think my hard disk is spoiled but I'm not sure?

    I have a Macbook Pro bought in 2012. I am a heavy Mac user because I am in college and I both study and entertain myself using my Macbook.
    So 2 months ago my battery spoiled. I took it to a Mac store and they said I reached my cycle and I have to pay about $200-300 to have it replaced.
    I didn't have cash at that time so I have been using it as a desktop ever since.
    Two days ago I was using the mac to do my homework on the web and I was on google chrome. I was also chatting to someone on Facebook and suddenly I couldn't connect to the Internet.
    I was mad and was cursing my service provider and I thought I'll shut down and restart it and maybe it'll work. (I was chatting with someone, see and was eager to continue my conversation)
    I shut down but it never restarted. It had this progress bar with white screen, similar to this http://www.cnet.com/au/news/progress-bar-appears-on-grey-screen-at-bootup/.
    I took it to the Apple store the next day and they ran a Hardware test but apart from battery problems, they found nothing wrong, so they asked me to take it back to reinstall my OSX.
    I did that, took me the whole day because I had to reformat my hard disk as well. (I am not good in tech). Basically, I erased everything and re-partition the Mac. and It worked! I was so happy but that lasted for a day.
    Today morning when I wanted to start up it went back to the white progress bar again. http://www.cnet.com/au/news/progress-bar-appears-on-grey-screen-at-bootup/
    I was so mad and wanted to give up but then I realized that I had an external hard disk. I started up with my external hard disk and installed the OSX from the hard disk.
    I am now typing this while my computer is booted from my hard disk. Otherwise, without my hard disk connected, it will go into the white progress bar thingy again.
    What is wrong with my Mac, and should I buy a new computer?
    (or a new hard disk until the new macbook model is released)
    Thanks! And sorry for the long post. I'll post bullet points if any of you starts complaining.

    What I an trying to establish is how you tried to repair the startup disk (the internal HDD) in your MBP.  You said that you have an external HDD with an OSX installed.
    When you boot the MBP with the external disk and open Disk Utility, the Disk Utility display should look similar to this:
    (This is from my 2010 MBP)
    The YELLOW icons are the external boot drive (which in this case is Mavericks).
    The GRAY icons are the INTERNAL HDD ( I have several partitions installed).
    When you booted the MBP with the external HDD and when you opened Disk Utility, did you get a display similar to the one above?
    [It should have displayed both the boot HDD (yellow) and the internal HDD (gray).]
    Did you try to repair the internal HDD by selecting the gray icons after you had booted the MBP using the external HDD?
    If you did, what were the results?
    Ciao.

  • Hard disk access noise

    Hi all, I just bought the DL2100 and additionally two new REDs 3TB each (RAID 1 configuration). NAS is really quiet idle, however every time I access files (read/write/stream) there is a ton of noise caused by the hard disks. Is this normal? I also have an external disk on the USB port. Absolutely quiet even during access. But the REDs spin and work even when I stream off the external HD. Seems to be somthing wrong What is your experience? Thanks in advance!Jimmy

    Hey Mike, I am talking about regular access and seek sound/noise. No weird other sounds.However, I think the hard disks are way too loud! (WD REDs expected to be quiet). I have a lot of old external and internal hard drives - not one is nearly as loud as my new REDs. Maybe I'm spoiled from my SSDs, I don't know. But seriously, the DL2100 should work pretty silent, regardless of file transfers, streaming, etc. Could also be a problem of the whole NAS construction, I don't know. Is there any hardware/software setting for "automatic acoustic management" for the HDs or the NAS system? Thank you!

  • I think I have an issue with my hard disk.

    Hey guys, I have a macbook pro 2011, 6GB RAM, 500GB HDD running 10.8.5. I seem to have a strange problem. Any song or video I play off my itunes or internal hard disk freezes and skips on both itunes and Quicktime player. However if I play the same song or video on say the VLC player it works just fine.
    Now the stranger part is that any song or video played from an external hard drive plays just fine on itunes, Quicktime, VLC etc. So my best guess was that something is wrong with my internal HDD. But then why are songs and videos playing fine on VLC but not itunes or quicktime when played through the internal HDD?
    Also since I have upgraded to 10.8.4 and up the spinning pin wheel has begun to appear very often. It even appears when I am surfing the web etc. Is this all got to do with a hardware issue or is it a software issue? Is there any point in me replacing my internall HDD with a SSD?
    Please do let me know what you guys think. Any and all help will be much appreciated.
    Regards,
    Arunabh Agarwal

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

  • Thinking about upgrading my Powerbook G4 hard disk to 160GB

    I am thinking about upgrading my powerbook G4 hard disk to 160GB, or even larger if possible...
    I have checked the macsales.com website and found this seagate 160GB, is it a good choice? Can anyone suggest a better deal or a better choice...?
    but I also notice one thing... it says that any powerbook model prior to 2003 might not support the any hard disk over 120G....
    So I am wondering is my powerbook G4 15inch 1.25GHz SuperDrive model able to have a 160GB hard drive...?
    Thanks a lot!!!!!

    The 1.25Ghz Powerbook came out in fall 2003, so if what MacSales says is true, then it should work.

  • Where can i find cookie in the hard disk?

    hi
    i am new to cookies....i read that cookie is a small file..that is creted and stored at the client's hard disk..... since it is stored at the client's side..anybody can change the data..that is the disadvantage of cookie... so can anyone help and tell where can i find cookie...i want to see that file and know actually what happens.........how an unauthorized person can change the content of the cookie..........
    regards,
    Akshatha

    hi
    i am new to cookies....i read that cookie is a small
    file..that is creted and stored at the client's hard
    disk..... yes
    since it is stored at the client's
    side..anybody can change the data..not really, cookies usually store session ids
    that is the
    disadvantage of cookie... so can anyone help and tell
    where can i find cookie...i want to see that file and
    know actually what happens.........how an
    unauthorized person can change the content of the
    cookie..........well, its usually in C:\Documents and Settings\<user_name>\Cookies in standard windows environment.
    good luck,
    cheers,
    ram.
    >
    regards,
    Akshatha

  • Please help me.ı delete mac os on my harddisk and ı format it ntfs.now ı have a mac os x install dvd but not working.ı think it is not working because of my hard disk format is ntfs.what can ı do?????

    ı delete mac os x lion on my hard disk and ı format it ntfs.ı install windows xp.now ı have a mac os x snow leopard install dvd but it isn't working. ı think it's not working because of my harddisk format is ntfs.what can ı do for install mac os x ?thanks

    The HD must be partitioned with GUID partition map and Mac OS extended (journalled) file system. Do not partition the drive into two. When you have a working OS X system, use Boot Camp to create the Windows partition and install Windows.
    If you're trying to install Snow Leopard on a Mac that was delivered with Lion installed =
    1. It may not be possible at all depending on the Mac.
    2. If it is possible, it cannot be done with the retail SL disc which is 10.6.3
    3. The only way it can be done is to obtain the original grey discs which would have come with the Mac if it hadn't had Lion installed in the supply chain. They will be at least 10.6.6 and more likely 10.6.7 or .8. You can try to obtain those from Apple Customer Services.
    Macs which can run OS X 10.6 (courtesy of a. brody)

  • I think I have a virus - hard disk full and administrator rights gone

    I think I have a virus - my hard disk is full allthough I only have about 20G of 60 used. I cant install a virus checker as I have lost my administrator rights (when I check in accounts, I am just a "standard" user. This means I cannot install any software as it will not let me run the installer program - says incorrect username / password

    You may have a corrupted disk but you do not have a virus. Boot using your original system installation DVD and run Disk Utility. Repair the disk.
    If you have no Administrator accounts at all, follow this procedure to create a new, temporary Administrator account from which you can fix your normal one.
    Power on or restart your Mac.
    At the chime or grey screen, hold ⌘ and S on your keyboard to enter single-user mode.
    At the prompt, type
    fsck -fy
    and press Return.
    This is a simple check for file system integrity and is optional. It will take a moment or two to complete. Wait for it to finish before proceeding.
    Type the following exactly as written, one line at a time, each line followed by the return key. There is a single space preceding the first "slash" ( / ) character in each line:
    mount -uw /
    rm /var/db/.AppleSetupDone
    shutdown -h now
    When you restart the machine, it will take you through the entire setup and registration process all over again. When you do so, create a brand new account with Admin privileges. Give it a simple and disposable name since you will delete it later. Do not choose the option to transfer or migrate information to the Mac.
    When it completes, log in under that new account, change your previous account back to Admin, and log out.
    Log in using your old account, which will now have its Admin privileges restored. Delete the throwaway account you just created.

  • Hard disk not detected once, but now working?

    Hi,
    I'm Zak, a bit of techie when it comes to playing with software, or re-assembling computers and whatnot. Unfortunately I've got no clue about some other things.
    A bit of quick history on my notebook: The fan has been making terrible noises the last few weeks. Initially I thought it was some dust so I got some duster. A lot of dust came out, so that can only be good, but the noises came back after a few days. After some searching I figured the other logical explanation was probably the hard drive going bad. I'm hesitant to send it back to HP because I use it for all my university work and it would really set me back a few weeks to not have it.
    So, a few days ago, I booted up my notebook to a "hard drive not detected" - or very similar - message. There were a few options, for f1-f4, they were system information, and 3 different tests (I think). I ran the tests, each one came back fine, noting that there was no OS installed, or hard disk to boot from. I rebooted because I hadn't quite seen it boot up, and wanted to see if there were any other options. Turns out, it started up fine. I restarted once more and again, it did fine.
    Next, I scrambled around, backing up all my data, getting together warranty info, installing the HP Support Assistant, etc. I ran all the tests from the Support Assistant and there were no problems detected. Since then I've just been hibernating the notebook when I stop using it, and I haven't encountered any unusual trouble. It all seems fine, but my warranty expires Dec 7th of this year. Is it safe for me to assume the "hard drive not detected" error was just a single misfire? I've read a lot of threads and FAQs on it and it doesn't sound like something that just happens once and goes away. On the other hand, I've never had to use a warranty so am unsure quite how the process works, and like I said, sending it anywhere would put me back in my work.
    For the sake of a full post, I have an HP G62-367DX Notebook, running on Windows 7 64-bit OS, and as far as I know there were no changes made between the error and my prior boot. If there's any other information I can provide, just let me know.
    Cheers, thank you very much for any assistance, and good day
    This question was solved.
    View Solution.

    The tests from the Assistant are not as comprehensive or reliable as the full hard drive test in the BIOS....tap F10 as you power up, go in there and find the hard drive test. Run the long form test and see what is says. It is not unusual for hard drive issues to start as intermittent and gradually get more frequent. If your drive passes the long form test you can fairly safely assume it was a one-time gremlin of some sort, but it is still a real good idea to back up. I like the idea of the online backup services and I will name Carbonite only because it is well known and not as an endorsement. There are several more and an external drive is also a good idea.
    You cannot put off a reboot forever; you are going to have to confront the issue at some point.

  • IMac doesn't recognise the internal hard disk (intermittent)

    Hi, I was wondering if anyone could give me an advice on this problem.
    Background: A few days ago my iMac (20-inch MA877LL) would not boot up, it would sit on the gray screen with the wheel spinning for ever. I thought the OS might have got corrupted so I tried to re-install Snow Leopard from the CD. Installation fails with a message like 'the content of HD can not be changed'. I then went to Disk Utilities trying to repair the disk but had no luck with the repair so I decided to format the disk. I managed to get into my hard disk using the cmd R key combination at power up and backed up my essential files onto a external hard disk. I formatted/erase the hard disk (zeroed out) and tried to reinstall the Snow Leopard again. The installation failed again. Rebooted the system again and tried to re instal again but this time I got as far as the 'select the disk where you want to install Mac OS' but my Hard Disk is not listed, it's a blank list! Rebooted the maching again, tried the installation, this time it sees the hard disk but the installation fails again.
    I have tried to change the boot source by hodling the 'alt' key down at power up, but I am only given the option of the CD drive with installation disk as the boot source i.e. no Har Disk. It appears that the Hard Disk is intermittently recognised and hence my problem with booting the maching when the problem started.
    I am happy to purchase an internal disk to replace the existing one, but I have a feeling the actual Disk it's OK, after all I managed to access my data to back up and then format it with no problem. I just think there's a problem somewhere that intemittently doesn't recognise the Hard Disk.
    Any suggestions will be much appreciated.

    You need to have the hard drive replaced. The one that is currently installed has failed.

  • Disk write cache corruption on an external hard disk

    Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
    Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
    This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
    I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
    On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
    I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
    I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.

    Disabling a write cache would not help you with the problem you are having. Besides the write cache is on the hard drive and operates independently of the operating system. But nothing can protect you from disconnected an external drive improperly, and if the drive is in the process of being written to, and the problem comes from directory corruption, not file corruption, as in the case you have described, disabling a write cache would not have made any difference.
    For the future the magic word is: Backups.
    < Edited by Host >

  • Can't copy files to hard disk

    I have been having trouble copying/moving files to an external hard drive from my Macbook Air 3,2. I have moved and copied files from the MacBook Air many times to the external hard disk but this time I am having a lot of trouble.
    I tried to move 2 movie files but it was taking an incredibly long time. So I clicked the "x" to cancel the transfer. However, it didn't stop it straightaway. The transfer just remained in limbo. Then I got a message saying something about how I didn't disconnect the hard disk properly and the hard disk just seemed to have disconnected itself from my computer even though I didn't eject it.
    Then it caused problems for my MacBook Air. When I went to check on the disk in Utilities, it told me I had to use the installation disk to start it up. Other strange things happened like my desktop picture just disappeared and suddenly I had an extra 10GB on my hard drive.
    I repaired the disk successfully using the installation thumb USB drive.
    (I also repaired the external hard disk).
    But I am having the same problem again when I try to move files onto the hard disk. It doesn't seem to work, as it's incredibly slow and when I cancel it, it says I ejected the hard disk wrongly. And the drive does not appear in the Finder Window.
    I don't know why this is happening to me. I repaired the MacBook Air HD and I also repaired the external disk and I can't copy movie files onto the hard disk. I have enough space and both disks are Mac Ext Journal formatted. I copied lots of movies the other day (about three days ago and last night) onto the hard disk without any problems.
    I really need to move the movies from my computer as I will runn out of disk space on the computer soon (I have about 12 GB left right now).
    I tried copying a jpg picture as a test, and it copied it OK but it took a long time. Much longer than normal.
    I got an error message just now:
    The Finder can’t complete the operation because some data in “Elechxxxxxxxxxx.mp4” can’t be read or written.
    (Error code -36)
    I never got this sort of error message before but now I am getting this message today several times when I try and copy the movies. I don't think it's the files themselves because I copied the same sort of movie files last night without any problem.
    And as I said, the jpg file took a really long time to copy, like 2 minutes even though it's only a very small file.

    This is not about saving the data on the external drive but I found this information to be helpful in case people have problems ejecting a drive:
    https://discussions.apple.com/thread/1322931
    I threw the following:
    sudo umount -vf /dev/disk1s1
    and the drive umounted. -v is verbose, just in case there were any errors thrown I wanted to know, and -f is force umount, which forces the drive to unmount. Check 'man umount' from terminal to see more info on these.
    After doing this a couple times (I was doing some testing with some other things to find a faster solution than having to open terminal and umount) it just started umounting correctly. I have no idea why, but it did. So just keep that command in mind, just in case.
    Gryyphyn, out.
    This may prevent the drive from being damaged by incorrect ejection. Because I could not eject the drive using force eject, restarting the computer etc, I unplugged the drive, which damaged the hardware of the drive.
    If I had known about the command window method, I might have  been able to avoid all these problems now that I have with a damaged drive and trying to rescue the data on that drive.
    That being said, I think Apple should try and resolve this problem they have with users not being able to eject drives. It seems to be a VERY common problem, and has nothing to do with users' negligence but to do with a systemic fault of Apple's.

  • Satellite L670 - Hard Disk Dead after 8 months only

    Hi,
    this morning I had to retunr my laptop due to bad hard disk problem. After 8 months, it's dead already.
    The positive points are: I am still under warranty and second the toshiba software hilighted me on time, allowing me to back up my data before the crash. Tks Toshiba for this tool, very usefull.
    The question is, how can a hard disk die that quick after just fews months ?
    Bad luck or bad use ? I am wondering.
    I wish to have a feedback from those who owns same model, L670 (windows 7), to understand if this problem is commun or if I was unluckily concerned.
    Also, if there are possible solutions to avoid HD stress in the daily use ? Like for example, reduce writing on it (back up of blu-ray using AnyDvD HD ON hd, then cut&paste to external HD), or to not connect too often external hard disk to avoid electricity surcharge if any ?
    In future, will I have to perform chkdsk more often ? Defrag ? If yes, at which frequency ?
    This is my 3rd laptop dying, Sony VAIO = mothercard dead after 1.2 years, Fujitsu Amilo xi = explosed after 3 years, and now Toshiba HD after 8 months.
    From 900EUR up to 1600EUR, I do not see a significative resistance of one of those models, Sony was the badest ever in terms of video card longevity and compatibility (games unplayable after 2 months, no driver update), keyboard "painting" was a mess with deterioration after fews months compared to Fujitsu and Toshiba (no pb). Toshiba L670 more recent, was the best in terms of game compatibility.
    What to do ? Stop buying laptop or use it only fews hours a day with a PC on top ?
    For time beeing I can't afford to have a PC + a laptop as I am unemployed, surviving with 10EUR/day,
    time to find a job again.
    Despite this situation, I managed to buy new Zelman notebook cooler for my Toshiba at around 40/50EUR, but, it didn't help apparently.
    Tks for feedback about L670 duration life, and particulary HD problem + best use to protect it.
    Guillaume

    You're not the only one.
    I bought an L670 in September last year. It was strictly for home use as replacement for a desktop PC, so it was never moved.
    Just after a few weeks things started to go wrong: boot fails, programs crashing, Windows 7 crashing...
    It's almost 7 months now since purchase and I'm writing this message on the very same notebook with 'Hard Disk Sentinel' running in the background, reporting more bad sectors every day. It tells me that hard disk health is now down to only 9% and that it has an estimated 14 days to live.
    Since the notebook is technically still running fine, I don't think I can have the HDD replaced under warranty or am I wrong? Does the HDD have to cease working alltogether before I can have it replaced under warranty?

  • Hard Disk Upgrades on Satellite 2410

    I know that I can just stick any drive that will fit in, but my question is:
    Can I just use the recovery CD that came with my laptop to re-install windows XP onto the new hard disk, or do I have to get a seperate copy of XP?
    The model of laptop is a Satellite 2410-something, and has 30Gb and I was thinking of going for a 80-100Gb disk.
    Thanks in advance!

    Hi James,
    Your recovery CDs will work with whichever hard drive you choose to install.
    With regard to your choice of drive please be careful with your choice of rotation speed. Your notebook has cooling only for the CPU heatsink so any extra heat generated by your hard drive will need to be able to dissipate naturally. The faster rotation speed on 5400 and 7200 RPM drives naturally generate more heat and this can cause problems for your notebook.
    Obviously if you are not using disk intensive applications this can be lessened by allowing the hard drive to power down when not in use.
    By the way I use a 5400RPM 80GB drive in my SA30 and the extra heat produced is only in evidence when I run a full virus/malware scan followed by a defrag and full image backup, and believe me the casing gets very hot indeed in the vicinity of the hard drive.
    regards,

  • Deleting photos from hard disk

    Hi, I have all of my photos on my hard disk and external hard drive. After I back up onto DVDs I would like to delete all of them off of my Mac (to free up some space).
    My question is, will I still see the thumbnails without having to connect the external hard drive (I do a lot of photo editing).
    Also, is there a correct way to delete, or should I just drag them into trash.
    Finally, if I spotlight search a photo, several are found of the same photo - why is this and how can I clean it up.
    As you have probably realised, I am not completely computer savvy and would appreciate any answers in a "Jack & Jill" style
    Many thanks

    Macssonew:
    First, iPHoto creates a minimum of 2 versions of each photo imported into the library, the original and the thumbnail file. If you edit a photo in iPhoto a 3rd version is created in the Modified folder. You cannot change that. It's how iPhoto works.
    I need more info on how you have things set up before I can advise you what your options are. How is your library setup currently? Do you copy files into the library when importing? Does the library contain the image files that are on the external HD?
    For what I understand now, you might be better served with multiple libraries, one smaller library on your laptop with current photos and a larger library on the external HD with the remaining photos. You can copy events or albums between libraries with the paid version of iPhoto Library Manager and keep keywords, comments, titles and any edited version intact.
    Or you might consider a more professional application, iView MediaPro, which can keep the "source" files on an external HD and have a catalog of them with thumbnails up to 640 x 480 on the laptop. You'd still be able to view the large thumbnails with the external HD not mounted assign keywords and other annotations, group into catalog sets or categories (albums in iPhoto), etc.
    Going the alias route has some big pitfalls. Without the source files available you can only see the thumbnails at their small size. You can't move them to albums or assign keywords. It's pretty limiting. If you have any video files in the library you won't be able to use it at all. iPhoto will continuously ask you to locate the video file. It can't operated with the video file missing as it can with the still image files missing.
    If you can describe exactly how things are set up and located we can better give you some ideas to pursue.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for