I updated my itunes then it failed, it wouldnt let me on said i had to uninstall then reinstall itunes so i did that now its saying i cant get it in because of error 2 what do i do?

i have uninstslled the reinstalled numerous times and repaired everything connected to apple and still i cant get on to it. can some one help me?

First checking something further. If you go into your Uninstall a program control panel, do you see Apple Application Support listed among your installed programs?
If you don't see it in there, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Similar Messages

Hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

http://support.apple.com/kb/HT1808
Regards.

I was told to create a password for my itunes backup, which i did. Now its telling me my passwords is incorrect. I dont know what to do because i am locked out of my phone and don't remember its password.

I forgot the password to unlock my phone. I read online to go to itunes and create an encrypted password for my backup and then sync my phone and then restore it. But now, when i try to enter my passcode into itunes to backup, it tells me it is incorrect. I don't know what to do.. I am locked out of my phone and my itunes backup. please help me

The backup encryption passcode has nothing to do with locking a user out of their backup.
If the encryption passcode has been forgotten, nothing can be done. There is no reset for the encryption passcode.
Delete the backup and create a new one.

I never updated my iTunes to version 7 and now it says theres an error?

It doesn't recognize my iPod, does that mean I need to get version 7?

what a great answer. any others?

My ipod touch 4th generation is disabled and needs to be connected to itunes. I did that now what?

Hi,
My password was entered in wrong too many times and now my ipod is disabled. It said to connect to itunes so that is what i did but it said that i need to put my password on my ipod. What do i do? Can you please help me?

Before rettoring you need to place the iPod in recover ymode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

When i tried syncing my ipod to my itunes it said i had to download mac os 10.7, i did, but now when i go to click on safari, it tells me i cant go on it without mac os 10.7 and i cant get on the internet, how do i get my safari back even the old version

hey, i attempted to download mac os 10.7 so my itues would work and now my safari wont work, is there anyway i can go back to an older verison just so i can have internet as when i go to click on safari it comes up with an error saying 'you need to download mac os version 10.7 for safari to work' i really need the internet as i have GCSE's in 17 days can anyone help me get my safari back please.

Beginning with Firefox 4, Macs must have an Intel x86 processor ('''''which you have''''') '''''<u>and</u>''''' OSX 10.5 or higher ('''''which you do NOT have''''').
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8] [https://www.mozilla.org/en-US/firefox/9.0/system-requirements/index.html Firefox 9] [https://www.mozilla.org/en-US/firefox/10.0/system-requirements/ Firefox 10]
'''''The good news''''' is that Firefox 3.6.x still supports OSX 10.4 and Macs with the PPC Mac or Intel architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first half of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.x: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
Updating your OSX to 10.5 or newer will allow you to use Firefox 10.
*Also see news about latest OSX version --> http://www.tuaw.com/2012/02/16/mountain-lion-drops-support-for-several-older-mac-models/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I bought a season pass now its saying i have to pay for the latest episode. What went wrong?

As I said in the topic i bought a season pass of The Flash and i have to pay for the latest episode. I bought three other season passes and thought if it were going to do the same for those as well.
How can i fix this?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I restored my iphone and updated it to IOS 7 and now its saying it cant activate the iphone, I restored my iphone and updated it to IOS 7 and now its saying it cant activate the iphone

i need help

it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.

Forgot my password now its saying connect to itunes

i forgot my password then tried it too many times and now its saying connect to itunes but when i do it says to access the phone on itunes i have to put it the password on my phone?? so confused??

If you cannot remember your passcode then you must restore the iPhone as a new device: iOS: Forgot passcode or device disabled

My vreative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?

my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Hello everyone, I am trying to restore my iPhone 4s and every time I try restoring it, it always goes to about 75% of the process then it says the iphone could not restore because of error 1. This is not error -1 it is error 1.

Hello everyone, I am trying to restore my iPhone 4s and every time I try restoring it, it always goes to about 75% of the process then it says the iphone could not restore because of error 1. This is not error -1 it is error 1. I reserached this error and it said to make sure I have the latest version of iTunes, i do, To make sure i have a security software updated, i do, and ive done everything it tells me to do yet it wont let me restore my iphone. Before I tried restoring it, it was working perfectly fine besides the battery which i have just replaced yesterday. Ive tried restoring it in two different computers with two different cables but still no luck. I found this phone at a park and it was working perfectly fine until i tried restoring it. I have no idea what to do now. I appreciate your guyses help!

This error generally indicates a hardware failure. Bring the phone to Apple for evaluation.

I am having problems updating my itunes to the latest version, on each stage I am getting a message 'The feature you are trying to use in on a network resource that is unavailable.' I try to click OK it fails and I do not know an alternate path to select

I am having problems updating my itunes to the latest version, on each stage I am getting a message 'The feature you are trying to use in on a network resource that is unavailable.' I try to click OK it fails and I do not know an alternate path to select, please help?
I get message like below on each stage of the update, Quicktime, Safari & iTunes;
It's so annoying as until I update my iTunes account my phone won't sync.

Many thanks for the screenshot. (The key to these is knowing which particular .msi file is being mentioned by the message.)
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
(Assuming that the QuickTime and Safari messages were also citing bonjour64.msi, you should also then be good to go with those installs too.)

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

HT4972 I have an ipad 2, yesterday I updated my ipad going in to settings software update, then the ipad went into resore mode saying it needs to connect to itunes. I did that and itunes said it was goingo to do a resotre and I lost all my info, pictures,

I have an ipad 2, yesterday I updated my ipad going in to settings software update, then the ipad went into resore mode saying it needs to connect to itunes. I did that and itunes said it was goingo to do a resotre and I lost all my info, pictures, contacts. Is there a way to recover all my info?

You should be able to reconnect to iTunes and then you should see an option to restore to your ipad from your last back up in iTunes.

I updated my itunes then it failed, it wouldnt let me on said i had to uninstall then reinstall itunes so i did that now its saying i cant get it in because of error 2 what do i do?

Similar Messages

Maybe you are looking for