I updated to IOS 6 and now it is frozen with a picture of a cord to connect to ITunes
Hi I updated to IOS 6 on my IPod touch and now it is frozen with a picture to connect to ITunes
What happens when you connect the iPod to your computer and restore via iTunes?
If iTunes does not see your iPod
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I tried to install iso 8.1 on my ipad 3 and it is now frozen with a power cord icon pointing to a itunes icon. What can I do ?
You will need to connect your ipad to itunes and it should take you through a restore process is you have trouble you may have to enter recovery mode see here:
If you can't update or restore your iPhone, iPad, or iPod touch -
Does anyone know how to restore it?
Try a hard reset. Press the power button on top of the phone and the home button simultaneously. Hold them both for about a minute and hopefully the screen will cut off and then the apple will reappear and proceed to the setup screen.
-
Hi, I update the iOS and now some app are in other language
hi, I update the iOS and now some app are in other language
Did you change your credit card in itunes under your account to one from another country. That sometimes will change the language on your apps try This "Click on your email address in the top right of iTunes to get to your account details, then click the "change" button next to your "Country/Region". Select a country for which you have (access to) a credit card. iTunes will ask you for credit card information when you save this country setting.
-
I have updated my iOS and now my hotmail will not verify my password through apple mail app. I have reset password - tried new password and old password and it still gives me password incorrect. Hotmail works fine on Mac. Has anyone had this difficulty and been able to resolve it?
Did you try deleting the mail account, then adding it back? I've read a lot of times that is what needs to happen in order for it to work properly.
-
Please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim
please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim. please i need help because i have to use my phone at the office tomorrow.
ASk your friend who unlock the phone for him/her.
ONly the carrier that the phone is locked to is authorized to unlock it.
bAse on your description, it sounds like your friend had his/her phone hacked to unlock it from the original carrier. -
I updated the iOS and now my App Store is showing prices in yen. How do I change the apps store back to the us version.
Change to US Store
1. App Store>Featured>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region -
my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?
Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
I tried to update and now my phones frozen with the itunes symbol and wont restore. What do i do?
Did you try to connect in recovery mode again? iOS: Unable to restore
-
I am in the process of updating my IOS and my phone screen is showing a picture of the itunes symbol with a USB cord. I can't get the phone to turn back on. What do I do? Help!!
Your device is in recovery mode. Connect the device to iTunes and the computer and follow the instructions in this support document. http://support.apple.com/kb/HT1808
-
My ipad is frozen with a black screen with a picture of a cord leading to the itunes icon. i tried to shut down my ipad but the turn off icon wont show instead the itunes icon with the cord keeps coming out everytime i open my ipad. what should i do ? and i dont want to lose my pictures, videos and other documents in my ipad please help me ....
I hope you have a backup if you don't want to lose your iPad contents. You have to restore the iPad now using iTunes on your computer. That's what the message on the screen means.
Take a look at this.
http://support.apple.com/kb/ht1808 -
i just tried to update ios, and now my phone wants me to connect to itunes. I dont have a PC anymore. what can I do?
No, I'm sorry. If you're seeing that Connect to iTunes screen that means the phone is in recovery mode and needs to be restored.
If you can't borrow a friend's computer, you can go to the Apple Store and they will restore it for you. -
I am updating my ios and now the phone is locked up
I was trying to up date my ios and now my phone won't do anything
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
NOTE:
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
HT1414 updated my ipad and now it is frozen
I updated my Ipad and it is frozen.. I cannot get it to connect to Itunes or even get past the screen that looks like it is asking me to connect to itunes.
Hello, joy_61.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iOS device, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
HT4623 i updated my IOS and now my wi-fi doesn't work - any suggestions?
I updated to IOS 7 and now my wi-fi don't work - just keeping spinning when it is looking for wi-fi. I can't back up to the cloud without wi-fi.
Ughh!Try going to Settings>Reset>Reset Network Settings.
Maybe you are looking for
-
Log off pop when navigating from SAP CRM Web IC to Utilities transactions
Hi Experts, I have created about 100 transaction launchers for ISU transactions, which are linked to the navigation bar in the Web IC. If I Click on this link which should open an ISU trnsaction, it doesnt open the ISU transaction. Rather it gives me
-
How to install hp laser jet 1018 on windows 7 x64
ok thanks how to instal hp laserjet on computer windows 7 (64-bit)?
-
Acrobat 7 Professional - Unknown Error (Unknown Exception)
For some reason, when I run preflight in Acrobat 7 Pro, after letting me preflight a few times or less, the program gives me an Unknown Error (Unknown Exception) error window on the first page of preflighting and stops completely. I have to quit the
-
Hi I am new to solaris environment. I have a java file which is dependent on xerces.jar. to compile the file i need to set the classpath. pleas let me know how to set class path for xerces.jar which is in usr/raj/ folder structure of solaris machine.
-
User defined modules in File Adapters
Hi SapAll. i just want to know how and in what situations we will use user defined modules in the file communication channels under Module Tab. can any body explain me briefly with a real time scenarios. regards. Varma.