I WANT DRIVERS FOR MY K8N Diamond Plus

I WANT DRIVERS FOR MY K8N Diamond Plus MAINBORD FOR WINDOWS 7 HELP ME OUT

Which do you need, that aren't supplied by Windows 7 itself?
Vista drivers may work if something refuses to work without special drivers:
http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=232

Similar Messages

  • Which PSU for MSI K8N Diamond Plus?

    I am so frustrated ... I have spent over 6 hours trying to find out which power supplies I can use with the MSI K8N Diamond Plus.
    I am not able to find any PSU that has 24 pin, 8 pin and 4 pin power connectors ... do you have to get them custom made or something? I am in Switzerland and it is hard to track these things down if you do not speak the language.
    This is the page which I am using to try and find a compatible PSU:
    http://www.stegcomputer.ch/browse.asp?cat=376
    I think the Spire Rocketeer VI should work but am not sure.
    Can anybody recommend a PSU that is compatible with this board? Please.

    Quote from: russellmrgn on 27-March-06, 20:51:26
    Off topic.
    Kenito443,
    I see you have the Stacker830, was looking at that case myself. How do you find it performance / quality wise?
    Russell
    Yeah i love it...the cooling is amazing, my case never goes above 30C and the cpu idles at 22c and never goes over 27C even when OC'd,.. granted i have substantial cooling for the cpu.  the case is completely tool less and boasts a up to 9 12cm fans...the case is double encased  Al so with a silent PSU (true 500W), which is my set up , it is extremely quiet. i was going to get the lian li until i saw both of them on display. the lian li seemed a little harder to set up for water cooling -if i wanted that option in the future, and the tool less feature for the cm stacker was a lot more appealing. Interestingly, it has its own proprietary hard drive noise reduction and cooling doohickey. Also, the mb has this cool pull out tray plus the PSU rail is really easy to accomadate for a larger  PSU. the store where i bought it from in santa clara CA threw in some of these nice dust filters with the case and I was sold. the only con was the price, i paid  around $230, which is a little expensive for a CM....oh and a word of warning , the case doesnt really look that big in pictures, but it is HUGE !! it has 10 5.25-inch bays..you can fit every single imaginable peripheral and still have room to fit your kitchen sink..i was definitely surprised to see how big it was in person.

  • Tips for my K8N Diamond Plus

    so although i have been into hardware for awhile now i have never really been a big OC'er.  it was never something i really wanted to do since i work my arse off to get my hardware.  my buddy recently OC'ed his micro-ATX board with his AMD 3700+ from 2.2 to 2.9 on a stock heatsink and he is sitting stable.  this got me thinking and wanting to try out a bit of OC'ing just to see what i am able to push my system until i upgrade from my current CPU to a new 4400+ dual core.  so here is my system and im just looking for tips/a quick walkthrough of what i need to tweak to OC my box and keep it stable.
    CPU: AMD 3500+ 939-socket, Newcastle core stock at 2.2ghz
    MoBo: MSI K8N Diamond Plus with the 3.09 BIOS
    RAM: 2x1gig sticks of PQI Turbo 400mhz/PC3200 timings of 3-4-4-7
    PSU: Sunbeam 550watt SLI certified
    Video Cards: 2x eVGA 7900gt's SLI'ed
    that is basicly the big stuff, i have  a X-FI soundcard and all SATA HDD's and stuff but that stuff doesnt really matter too much when it comes to OC'ing.  anyways, im just looking for directions on what i should set my stuff to.  if you could also through in a run down of how HT, the multiplier, my FSB, and the DRAM/FSB settings affect each other i would really appreciate it.
    basicly all i would need is something like this for my settings:
    multiplier:
    vcore:
    FSB:
    DRAM/FSB:
    mem timings:
    HT settings:
    and anything else i have left out.
    again, i would really appreciate the help.

    Quote from: Stick on 22-November-06, 19:13:44
    geez guys, can't believe you haven't spoted the mistake yet. 
    first, the newcastle is socket 754, there is no newcastle core for socket 939.
    k8n diamond plus doesn't have a 3.09 BIOS.
    so iostream, please make sure that you get the details correctly.
    tiresmoke, syar and bosskiller, slacking guys, slacking?  (joke)
    AMD Athlon 64 3500+ Core Newcastle s.939(http://www.aceshardware.com/read.jsp?id=65000304) ----> CPU ID: http://www.techpowerup.com/cpudb/details.php?id=43
    MSI K8N Diamond Plus BIOS 3.09 exist, can be found here:( 6 = MS-7220 bios 3.09) ---> https://forum-en.msi.com/index.php?topic=101664.0

  • Best 2 gb kit of memory for a K8N Diamond Plus ?

    I have the Diamond plus mainboard on its way, should be here Monday.  I just received Wednesday a 180 opteron and a 2 gb kit of Corsair XMS 3500LL pro.  I installed these in an Asus A8N SLI deluxe and have spent the last day trying to unsuccessfully install windows, only to find out one stick of the XMS is shot terribly, 7,776 errors in the first 10 minutes of Memtest86.
    So needless to say these sticks are going back.  I have never in my years of building computers received memory in this bad of condition before,  and although an isolated case it could very well be I have a very bad taste in my mouth considering the 300$ price of these.
    I would welcome recommendations on 2 gb kits that would be suitable for this board and processor, preferably low latencey,  doesn't have to be more than PC3200-3500 since I am not an extreme overclocker,  tighter timings on a lower FSB are more important to me since I have a larger processor. G-Skill, Patriot, Mushkin? what works best for this board/bios?
    thanks!

    Grouse - I think you can increase your voltage to ram by moving the  jumper pins JV1 on the motherboard 1 - 2 to 2 - 3 which gives 3.1 volts and up. But by moving that jumper voids the warrenty of the motherboard. Well that's what the sticker on it says :(
    Jumper is JV1 on the motherboard
    Select DDR Power Jumper: JV1
    The DDR Power Jumper is used to boost the DDR power. The BIOS will auto
    detect the mode you configure by hardware and provide the properly selection for
    DDR Voltage field. The hardware jumper setting and the software BIOS selection
    have to complement each other.
    JV1 - Pins
    1   |-  3|
    -   |-  -|
    16 |- 18|
    ^
    Boost Mode
    (3.3V~4.1V for you
    to select in BIOS)
    |1   -|  3
    |-   -| -
    |16 -| 18
    ^
    Normal Mode
    (2.6V~3.2V for you
    to select in BIOS)
    (sorry about that, but you get the idea)
    MSI Reminds You...
    We are not responsible for any damage from changing the default value of
    DDR voltage.

  • Is this good ram for a K8N Diamond Plus?

    http://www.newegg.com/Product/Product.asp?Item=N82E16820145486
    Brand-CORSAIR
    Series-XMS
    Model:TWINX2048-3200
    Type:184-Pin DDR SDRAM
    Capacity:2GB (2 x 1GB)
    Speed:DDR 400 (PC 3200)
    Cas Latency:3
    Timing:3-3-3-8
    Voltage:2.6V
    ECC:No
    Registered/Unbuffered:Unbuffered
    Heat Spreader:Yes
    And how would I go about Overclocking this ram?

    It is good/ ok RAM.  You might expect about 480 Mhz out of this RAM at 1T.  Read the stickies on overclocking as this will answer most of your OC questions.  Many people round here like Mushkin Redline, and I used Kingston VR for my project.  Not the best stuff, but it works for a moderate overclock and extreme OC if you use memory dividers. 
    Search the forum for memory.  There are alot of threads on this. 
    Also post a sig with your components.  I know your building a rig, but we like to see what you have and where your going when we are answering questions.
    Edit://  Sorry did more research on this stick of Mem,  Not good for OC.  Ignore my initial comments.

  • K8N Diamond Plus need a -5v rail?

    If you read my saga, by now you know my on-board sound card isn't working, I haven't been able to figure out what was the problem, nor did my shop.
    Now.. do I need -5v rail  for the k8n diamond plus like the K8N Diamond (non-plus) ?

    Quote from: HighTest on 14-February-06, 05:15:15
    Doubt it, as you don't need it on the non-plus.   See my sig, I've got one and my onboard Creative Sound solution is working fine with my Enermax EG565P-VE FMA 2.0 (SLI Compliant).
    There's no -5V on the supply, in fact there is no wire on that connector, so it's very evident.   What I do see is a mod performed before the board was shipped for retail.
    Since I purchased my board in Feb 2005, I suspect most in the channel also don't require the -5V.    The Diamond Plus has the mod build into the actual board design, so you shouldn't have any problems there.
    only the 1st revision Of DIAMOND have -5V supply. Your's the latest revision without -5V
    Quote from: TEKNOW on 02-March-06, 04:20:05
    What I mean is, I no longer have crackling/popping/distortion etc. - but my sound is -weak, it's maybe 1/5 the power it used to be on my old P4 rig.
    You need the powerful PSU which has 12V and i believe it has been discuss in this threat.

  • WANTED! - List of IRQs and Hardware for K8N Diamond Plus?

    Hi there!
    I'm trying to find out what hardware shares IRQs on the MSI K8N Diamond Plus motherboard.
    I want to use an X-Fi card in the bottom (orange) PCI slot, and 2x 7800GTX cards in the PCI-Express x16 slots and would like to know if any of the devices will share IRQ's with onboard hardware.
    You can list your IRQs by running msinfo32 - start, run, msinfo32 [enter], then click expand the following item in the tree System Summary -> Hardware Resources -> IRQs. 
    You can export the IRQ's in msinfo32, make sure the IRQ list is displayed, then click file/export, then save to a text file.  Open the  text file with notepad and copy and paste your results to your reply below.
    I'm trying to find out whether an MSI K8N Diamond Plus will have less conflicts or less important conflicts than a ASUS A8N32-SLI.

    There are 4 PCI IRQs called INTA#, INTB#, INTC# and INTD#.
    These INTx# are interrupts and are level sensitive, this means that the electrical singnaling allows for them to be shared among all PCI cards. All single device/ function PCI cards that use only 1 interrupt must use INTA# as this is one of the rules in the PCI spec. If there are additional devices within a chip or on-board a card then these additional devices can use INTB#~INTD#, since there are very few multifubtion PCI boards (none that I know of right off my head) this means that most or all devices will use INTA#.
    With that said; you do not really need to worry about hard wired INTA#~INTD# at board level.
    If you are using Win XP I would not even worry about IRQs as Windows uses "Virtual IRQ routing" which simply means Windows XP will assing IRQ to each device and XP handles this extremly well.

  • K8N Diamond Plus SiI 3132 WinXP x64 non-RAID drivers?

    Hi
    I'm looking for non-RAID drivers for the SiI 3132 on my K8N Diamond Plus for WinXP x64 (I managed to fine the x32 ones and they work fine so I know it's not the drives or the moboard.  I tried the drivers on MSI's website.
    I've searched around the forum and followed the leads onto planetamd64 and the Asus website for them, but to no avail.
    To be precise, I have selected non-RAID in the BIOS, and the drives to show up on on the POST screen, but do not appear in Win 64; there is the classic exclamation mark in the device manager for a 'Mass Storage Device'.  I don't want to concatenate the drives in RAID mode, so I did not try booting with that selected in the BIOS lest it destroy the stuff I have on them. 
    [I miss the simple JBOD option in the 3114...]
    Any help gratefully appreciated!
    thx
    bn
     

    Hi all,
    I solved the problem. 
    You won't find the drivers under the drivers section of SiI's website but you will in the Knowledge Base.  Look under Serial ATA | COntrollers | SiI3132, you'll find article 11043 'SATA 64 bit Windows IDE driver - released' dated 8/19/05.  Click under that and you'll find a file 3132_win64_idrv_1004_logo.zip.  It's what you need.
    Hope this helps someone.
    bn

  • Aftermarket HSF options for K8N Diamond Plus

    Just built a new rig with the K8N Diamond Plus  and am very pleased with the board -- worked great from first power up and with a little BIOS tweaking I have no trouble getting a 50% overclock from my dual core Opteron 170.  No headaches at all, unlike my previous experiences with Abit boards.
    The AMD heatsink fan unit (with heatpipes) provided with the 170 is not bad at all, but I'd like to replace it with a more capable unit, along the lines of the Zalman 9500, Scythe Ninja, Tuniq Tower 120, Thermalright XP-120, etc.  The tall heatsink of the Nvidia NB is close to the CPU socket and quite high, so I'm not sure if any of these will fit.  Anyone using one of these or similar heatsinks ?  Please let me know if they fit, or did not fit. 
    Since I could find any of the 7800GTX 512MB boards I wanted, I'm using a single MSI X1900XT card right now but plan to go SLI in the future with 7900GTX cards driving the 30" Dell monitor.  The ATI video board and nVidia mainboard surprisingly get along great, with no crashes so far and 3DMark06 scores above 6000 -- the X1900XT is an impressive piece, and much faster than the X800XT-PE I had in my previous computer.  But the fan can be extremely loud and the Catalyst Control Center sucks.  Unfortunately the old ATI control panel is no longer offered...

    TimeReaper,
    The problems your are talking about are not uncommon with this MS-7220.  The BIOS Clear Circuit physically has problems and that is not something they are going fix with a BIOS upgrade.
    The BIOS Clear Circuit actually trashing the values stored in the CMOS by not doing a complete clearing of the CMOS is causing the problem.  What leaves trash for parameters, for the BIOS to use when rebooting.
    Let give you an example that fits your case.  You can set the BIOS to turn the system on at any give time and date.  So, if the trash in CMOS is in those parameters storage location.  Therefore, whatever trash value gets stored in the locations, as a dated and time, will turn the computer on at that time.  So, you could of had the computer come on in the meddle of the night two week later.  Now, think of all the functions the BIOS have and how many weird things people are having and do not know why.  There is one guy that is a regular on the Forum how has been fighting a problem I know is caused by trash in the BIOS CMOS, but Strick and I have ask him to do a good CMOS clearing and he just will not do it.  I even wrote out in great deal the over night CMOS clear procedure I use.  It is a pain in the ass, but some times, I have too use it.  I just had to use it, upgraded V3.09 using short CMOS Clear and had no problem.  Used the short procedure again when upgrading to V3.0A and everything when to hell, had to finally use the long overnight procedure and reinstall Windows to get computer to run right again.
    NoBS, when your computer goes BOOO during the night just plain it o MSI.
    Roger
    When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings.  It is almost impossible to estimate what your problem is without knowing something about it. 

  • K8N Diamond Plus' Audio drivers 4 Vista RC1???

    Guys i need to find drivers for RC1 Vista for my built in Mother board creative Audigy SE on K8N Diamond Plus. Can any one help me where to find these drivers????????

    well i installed the vista RC1 and downloaded the Audigy Se's vista RC1 drivers from creative's  web site and i installed it on my system and it detected my motherboard's audigy SE as audigy live 24 bit but there was no sound so i updated the driver and i gave the path of my window's xp driver and it worked for windows vista RC1. and my sound card is now dectected as audigy SE not live 24 bit. thanks to msi for making a driver which works with both xp and vista RC1. i ll try to install the Xp's driver directly on Vista with setup.exe, and will see if this will give me all the sound configrations which we do see in windows xp. But i still request MSi to provide us good vista drivers.
    I have one question,
    CAN WE INSTALL AUDIGY SE's DRIVERS DOWNLOADED FROM WWW.CREATIVE.COM FOR AUDIGY SE BUILT IN SOUND CARD OF DIAMOND PLUS MOTHERBOARD(FOR WINDOWS XP) ?

  • K8N Diamond Plus, SLI and Creative X-Fi cards, anyone running similar?

    Hi there!
    I've got an ASUS A8N32-SLI board and my X-Fi card does not work with it, nor does it for many other people with similar setups.
    See here:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=31426
    and here:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=26289
    I get crackling and popping noises when running most games, e.g. BF2, Fear, FarCry.  When my 2x7800GTX's are in SLI mode it crackles loads, e.g. start far cry, click options, and listen.  When i disable SLI mode it crackles less, but it still crackles.  Many others encounter similar issues with their systems that are not identical but the symptoms are similar - high load = crackling/popping.
    My question is:
    Is anyone here sucessfully running any X-Fi card (music, fatality, elite pro, etc) with 2x video cards and NO crackling/popping in BF2, FEAR and FarCry?
    I've already had a replacement X-Fi card from creative which their tech guy said "should" fix it, lol, I'm wondering wether to replace my A8N32-SLI with an K8N Diamond Plus to fix the problem.  Besides, the MSI board has better PCI slot location and works with nTune too unlike the ASUS board.

    What's going on guys.
    I hate to see peep's having soooo many prob's and it sucks major BALLZ. The reason why I'm reposting is that I encountered a new issue. Not with my rig, but a friend's.
    We pretty much have the same setup. Differences are he's using 2GB of Corsair DDR400 (which is picking up as DDR333 as well), different branded video cards (I'm running two EVGA 7800GT's in SLi, he's running two BFG 7800GT's in SLi), XFi Platinum (me, Fatality Edition) and he's got a dedicated ITE RAID PCI card for his RAID from his previous rig. Configured his BIOS pretty much the same way I have it running (he wanted to Overclock his AMD x2 4400+ to 2.6 GHz), but when it came to installing Windows we kept getting BSOD's during installation. Looked over things numerous times and it didn't make sense. We resetted the BIOS to default settings and Windows went through without a hitch. We tried OC'ing it one more time and Windows was fine. But, when he installed and ran Quake 4, either Windows or the game would just lock up. He booted back into the BIOS and put the CPU back at stock frequency of 2.2 GHz. Game ran flawlessly afterwards. That points at the processor. The only differences were we both have different stock fans and his CPU was manufactured in July '05. Mine in Sept '05. His rig also reports the infamous "Phantom" PCI modem as well.
    Quake 4 is the only game he's got installed so far, but he reports everything is set to their highest qualities, including resolution. He said it runs great with no anomalies. He's going to install Dawn of War and Winter Assault later I know.
    Me? I haven't run into any issues with any games either, including F.E.A.R. as Hydrasworld asked. Both of our sound cards are in the Communication PCI Slot of the motherboard. My take on the OC issue is since we're using different proc's from different wafers, maybe my chip had revisions in September that the July proc my friend has didn't. Also, his heatsink has one less copper pipe I noticed. I'll still drop by for help. Good luck to you all and the only other thing I can add is try using the latest drivers for each piece of hardware you've got.
    LPB
    P.S. If you can and you purchased a retail version of the processor, on one of the sides of the carton insert for the processor, a date should be printed. Maybe that can explain some issues. Once more, my proc was manufactured September 15th, 2005.

  • K8N Diamond Plus microphone not working

    Hello All...
    Thanks to everybody who helped me with my cpu power problem - the computer is up and running wonderfully now.  The only issue that I'm experiencing, and I'm fully prepared to accept user error, is the fact that my mic is not working, or the levels are EXTREMELY low.  I have an antec case, and I used the pin header on the motherboard for front panel audio which contains a mic input and a line out (For me, it's for headset convenience without having to remove my speaker wire).  Since both the pin header and the connector conform to Intel standards, I think that's not the problem.  I've used the drivers on the CD as well as the drivers on the Creative site for Soundblaster Live 24 bit.  Both the front and rear connectors (and either version of the driver, for that matter) yield very low volume from the microphone.  I *could* suspect the headset, but it's fairly new and worked yesterday, and also, the earphone portion seems to work correctly.
    Since you'll want my specs:
    K8N Diamond Plus
    Antec "Piano" case with 450 watt antec smart power supply
    Geforce 7800GTX
    dual pata drives (striping)
    dual dvd rw drives
    dlink wireless lan
    Let me know if I can provide any other info, and thanks in advance for any assistance
    Steve

    Didn't seem to make any difference.  I jumpered the pin header so that it was back to the way I got it out of the box. I even used a microphone for our camcorder, and that didn't seem to get any better result either.  Very strange...........

  • PCI Modem??? I don't have one installed... K8N Diamond Plus...

    This is what I've got installed on the K8N Diamond Plus:
    AMD x2 4400+ @ 2.75 GHz
    4 GB DDR 500 GigaRAM
    2x EVGA GeForce 7800GT's in SLi
    Sound Blaster XFi Fatality Edition
    2x 74 GB WDC Raptors (non-RAID)
    2x 320 GB WDC SATA Raid Drives (RAID-0 on Sil3132 chipset)
    Sony DRU 810 DVD Recorder
    Sony CRX 320 Combo Drive
    WinXP Pro 32-Bit SP2 installed (WinXP Pro 64-Bit this weekend)
    Windows installed A-O-K, drivers no prob, but, I ran into two snags. One, in my system properties a "PCI Modem" shows up looking for a driver. Second, I have a Koutech Firewire 800 / USB 2.0 PCI-e card that picks up when it wants to. That card has been removed physically and I'm planning on RMA'ing the Combo card...so far. Has anyone seen a phantom modem card? I'm really hoping and praying that it's not the motherboard that's defective. 
    The only other minor issue is that my memory in the BIOS detects as DDR 333 at 2.6v. GigaRAM recommends 2.9-3.1v, but I cannot adjust the voltage in the BIOS. Is there a physical way thru the BIOS (without voiding the warranty) or only way I'll be able to thru software??? Prefer not to. Any help on the issues mentioned will be appreciated.
    Latin Polar Bear

    I see that few people have come and gone past this topic. Can anyone help or does anyone have any insight???
    LPB

  • MSI K8N Diamond Plus - Guide to my first week

    OK, not a newb here, but been around the block quite a bit.   MSI K8N Diamond Plus is my 5th A64 mobo (ECS K8M800, my daily undestroyed computer, K8T800, my 12 year olds gamer, Asus A8V Deluxe, first 939 system, Abit AN8 SLI, first SLI gamer, and now the MSI Diamond Plus).   Had the KDP (K8N Diamond Plus) for more than a week now, and here's what I've learned.
    This is state of the art again, and we have no one to blame but ourselves for the pain this causes us when we upgrade like lunatics 
    And as usual, the drivers and BIOS are al Dente (i.e. not cooked enought yet, a little raw)
    MSI is also oddly silent on this system, which is wierd, as they are a large company, and specifically cater to enthusiasts.  But their BIOS guys are MIA.  Hopefully this will not be forever.  Asus, ABIT, DFI, Epox are always fast with fixes
    The board is a nice design, with everything basically accessible, as much as any other board.   Lots of purposeful components, not too many dumb frills.  No tooty fruity colors, but rather practical parts.
    The new 2 piece NForce chipset is fine, and the MSI guys gave us a decent, but funky cooler.  It gets a little warm to the touch when you pound on it with Prime95, or Quake4, but other than that it is fine
    The manual has a zillion typos, and fortunately for us in this forum, we have shared what we've learned.  The translation from Chinese to English leaves quite a bit to be desired, and hopefully, MSI will learn from Asus and Abit and get a better translation service.  In 2006 this is just plain stupid, especially with a $225 board   
    As usual, the mobo supplied tweaker utilities are just aweful.  They look like a hallucination from a Hunter S Thompson book, and they work about as well.  Core center is a sad state of affairs, and the rest of them just burrow their way into your otherwise stable system and cause it to have poor behavior.  And therefore as usual, the BIOS is the best way, if slowest, to tweak this bundle of parts
    Which brings us to the BIOS.  IMHO, the worst one I've seen on a high end board.  ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation  )
    There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are.  Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test.  But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
    The board is clearly sensitive, which is a result of it being high strung.  This is no different than any "first out" product I've ever bought.  Most take 2 or 3 turns of the crank to get totally stable and forgiving.  This one hated my OCZ platinum EL 2Gb kit memory, and it brought out the worst in one of the SLI based EVGA 7800 GT COs.   These components worked in the Abit AN8 SLI (although not always great), but the MSI has ZERO tolerance for even the slightest pertubation from the memory.  It was BSOD city until I removed both of these components by process of elimination that took probably 100 hours
    Once I removed the bad components, and replaced the memory with Geil Ultra X 2x512 2-2-2-5, it worked great, ran Prime95 for 10 hours with no errors, and seems reasonably stable.  I've RMA-d the bad 7800GT CO back to EVGA, and will report back on how SLI behaves when I get the new one (cross shipped of course, I haveno patience )
    I also now need to replace the 2Gb RAM kit with something that the board will tolerate.  I may RMA the 2Gb kit back to OCZ and try another one, but I dunno.   I love OCZ but I have a bad feeling about this, even though they have great!!! support.  I may try OCZ PC4000 or the RAM that Roger successfully used.
    I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster.   I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53.  I had to rebot to see what was going on.   The Thermalright XP-90 kept the proc from melting down through the earth
    Finally, I hope this board attracts more people, and therefore more tweakers that can figure out all these gadgets and settings.  Everyone flocked to the Asus X16 SLI product, which is too bad, as this one needs lots o' folks to hack it up for us to figure out what is going on.
    The on board Creative audio sounds lousy to my ears, and I will replace it with an Audigy 2ZS gamer that I had in the Abit.  It just sounds better, but hopefully the drivers will not trash my newly stable system.   Creative scares me, they scare me alot.
    I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory.  So far, so stable, no smoke coming out yet 
    I hope this info is somewhat valuable to someone on this board.  I will post details of all changes that I make, as others are doing, so we can at least take care of ourselves with this thing.

    Quote from: nanohead on 15-February-06, 01:17:10
    Which brings us to the BIOS.  IMHO, the worst one I've seen on a high end board.  ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation  )
    There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are.  Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test.  But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
    first of all, i do think that all the settings in the BIOS have an explanation in the manual, even if it's a basic one. if that explanation doesn't tell you everything in detail, is because if you do need a detailed explanation of the settings, you probably shouldn't be messing around with those settings.
    Quote from: nanohead on 15-February-06, 01:17:10
    I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster.   I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53.  I had to rebot to see what was going on.   The Thermalright XP-90 kept the proc from melting down through the earth.
    wanna tell me how did you get 1.95V on that mobo?
    Quote from: nanohead on 15-February-06, 01:17:10
    I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory.  So far, so stable, no smoke coming out yet 
    a 0.5V  bump? again, you must be joking. maybe 0.05V.

  • K8N Diamond Plus

    Beta BIOS for K8N Diamond Plus (MS-7220, PCB 1.0)
    BIOS Sign-on message: MSI Project A7220NMS V1.34 04/23/07 (Date: 04/23/2007)
    Attachment name: A7220NMSv134.zip
    Make and ensure PC is stable before proceed. Remove any OC temporary if you have.
    Use Beta or Modded BIOSes at own risk!
    flash BIOS from USB key, by using our Tool(easy & safe way to flash):
    MSI Forum HQ USB Flashing Tool 

    Hello,
    I just installed the bios 1.34 on my K8N Diamond Plus MB.  Everything went ok with the flash USB utility program. 
    Has anyone had trouble Disabling PCI ... and/or SATA ... Speed spectrum?
    Everytime I try to disable them the computer freezes and restarts.
    I did unplug the power cable and cleared the cmos by pressing the clear cmos button on board and all that good stuff.
    Granted it's a beta Bios but just wanted to know if anyone else having that problem.
    Sorry for bring this old topic back up. Didn't know if I should start another topic or posted in here.  So please be kind 
    Bluephoenix

Maybe you are looking for