I want to install DEV and QAS on same Server

Hello all,
Can anybody tell the step by step procedure to install dev and qas on the same server, i have installed Dev with win 03 server and oracle as a DB.
Now what to do? please provide some document or note to do this.
I am waiting for ur reply, its urgent....
Jitender

Hello Mr.X,
SAP suggests that even for a single system installation data files,redo log files and back up of log files should be placed on different hard disks. So it makes sense to do the same for different instances as well. Going to ORA_HOME you need mutiple ORA_HOME.
For mutiple ORA_HOME please check this link :
http://www.lc.leidenuniv.nl/awcourse/oracle/em.920/a96697/moh.htm.
System number definitely have to be different. System number will also influence the ports.
Also check the SAP installation guide for installation of 4:6C on unix/oracle platform. It discusses this mutiple database instance concept. Other higher release installation guides also do that.
Please award points for useful answers.
Regards.
Ruchit.

Similar Messages

Installing Mobile Repository Server DEV and QAS on same server

Hi,
i installed CRM Server 7.0 SR1 ABAP DEV and QAS on one server. Afterwards i installed the Communication Station DEV and QAS together on one server.
Now i want to install the Mobile Repository Server (MRS) for DEV and QAS on one server. For DEV i have installed it successfully. But i don't know how to install it for QAS on the same server.
The only answer i found is: Re: CRM Mobile installation
Here is written that one of the repository database ARS_DB needs to be renamed.
But my first question is:
Do i have to install the MS SQL Server 2005 again for the QAS system? Only a default instance is supported and not a named instance. Can i install a default instance twice?
What are the steps for installing the second MRS? Does anybody did it successfully?
It would be very nice if someone could help me.
I use SAP CRM Mobile 7.0 SP04 on Windows 2003 with MS SQL Server 2005 SP2.
Kind regards
Wolfgang

Hello
MRS requires SQL Server 2005. It is not possible to \have two MAR repositories with two default instances in a single machine.
Installation might not allow you or throw an error if you have more han one sql server defualt instance.
Instead, you can stll follow the either of the following approaches:
1. Use DEV MAR repositroy itself as a TST repository. It means, you will have one MAR for both DEV and TEST.You have to be cautious.
2. * First install the DEV MAR in one machine.
Configure DEV MAR to DEV CRM for transports.
Restore the TEST MAR DB in DEV MAR machine.
Also configure TEST MAR to TEST CRM server for Transports.
Approach 2 avoids the second time installation. You should have the TEST MAR repository to restore. this option woudl work:)
Best Regards
Shankar

Is it OK to install BW and BO in same server

Is it OK to install BW and BO in same server ?
BW 3.5
BO XI 3.1 SP2 FP2.9
Is there any known issue in this approach ?
What is the recommended system requirement for it ?

I would do it only if it is on Unix and the H/W is powerful enough.
Keep in mind that when you shutdown/reboot you are taking offline 2 systems at once.
In 64bit Windows there are conflicting versions of the required rfc libraries (32bit and 64bit) which are not easy to resolve and will affect the MDX parser.
Regards,
Stratos

Can we install Dev and QA in Single Server

hi
Now we r going to sizing the BW System.
we getting data only fro HR,FI,CO and MM
Can we installed the BW Dev and QA in one server
Do we need have seperate serversfor each of them
Total concurrent of users would be 25
Can anyone help me out
Thanks

linda,
you can indeed have the servers in the same servers - there is a name for this - it is called MCOD - multiple components in one database , you can either look at having different DB for the above or sharing the same DB , it will be a matter of server sizing thats all and configuring the transport connections.
On an average assume 300MB (150 App + 150 DB) of RAM per concurrent users.
also have a look at service.sap.com/sizing....
Arun
Assign points if it helps..

Need to install CRM and ECC in same server

Hi Experts,
I want to install CRM and ECC server in a single server. (Win2003/MS SQL server)
I think we need more space (Sizing).
Apart from this, i have couple fo questions in my mind..
1,Which server should i install first.?
2,Does it use the same Database for both servers (CRM and ECC) installation?
3,I know that SID is differ for both server, does it use the same kernel for Both.
4, What are the dependent and independent files ?
5, How the database wil behave when i stop/start one server ?
Could someone help me the stpes.
Thanks and regards
Thirumal

1,Which server should i install first.?
Doesn't make any difference... you can start with either of them
2,Does it use the same Database for both servers (CRM and ECC) installation?
Yes, It will create separate instances on the DB.
3,I know that SID is differ for both server, does it use the same kernel for Both.
No.. they'll have separate kernel directories.
4, What are the dependent and independent files ?
Files will be all independant, beside the hosts and services files.. but sap wise everything should be under different SID's (as far as i remember)
5, How the database wil behave when i stop/start one server ?
You have to be carefull with this one... if you stop the DB it will affect both systems... so when stopping the system make sure you use stopsap/startsap r3
Regards
Juan

BW Landscape Question - DEV and QAS in same Environment

Hi,
I do have a doubt about the following Landscape of my client:
ECC - PRD CLNT 100 --> BW Prod
ECC- DEV CLNT 400 --> BW Dev
ECC- DEV CLNT 100
Basically
ECC- DEV CLNT 400 has MasterData but NO customizing !!
ECC- DEV CLNT 100 has NO MasterData but Cusomtizing !
First I pointed the Source System to DEV CLNT 100 but as has no MData that though was no point on having such connection.
So created the landscape as above described.
The only draw back I can see is that every time I activate some BI_CONT in BWD it replicates it in DEV CLNT 400 for which the client is not open for customization so get the message "no authorization for..."
So the procedure is to activate the Datasources (in ECC) on CLNT 100 where is open for Custo and is automatically visible on CLNT 400.
Think the landscape described above is a proper one or can see any pitfall ?
thank you,
AM

Hi Alex
Regarding your question, there is no right or wrong approach, but one has to understand the purpose of the multiple clients on a system, plan accordingly and depending on the business requirements this drives the landscape.
On a development system, you can have multiple clients for various purposes and have the BW system linked to the relevant client:
- Customizing
- Testing (prefered BW Development connection to an ERP Development system)
- Play
In response to your question, it is a good approach to following and the only pitfall would be someone trying to do transactions in the customizing client and the BW system not been able to extract the data for testing purposes.
Currently I have my BW Development system pointing a ERP Development system which contains 3 clients:
- 1 Client (i.e. 200) for Customizing (customizing only, no transaction data).
- 1 Client (i.e. 220) for Play (copy from the ERP production system which contains master and transaction data).
- 1 Client (i.e. 230) for Testing (copy from the ERP production system which contains master and transaction data).
For the testing and play clients, we can also refresh the data if required, generally we try to do this ever 3 months or when there is a large project to be done, i.e. fiscal year change).
Of these 3 clients, my BW Development system only points to the ERP System's Testing client (client 230) so that the we can test extractions on master and transaction data. All developments done in the ERP Development system for BW is done in the customizing client (client 200), since most of the development work is client independent regarding the extractors, so it would then be automatically in the testing client. We have been using this approach for the last 5 years, with no major issues.
PS: The only issue you may have is regarding the extractors that use classification (transaction CTBW) as there is a client specific issue refer to OSS Note: 588184.
Regards
Derek

How to Install XI and EP on Single server

Hi,
How to install XI and EP on same server. I tried to install XI then EP . After EP installed then iam not able to access XI j2ee engine . I think some where port conflicts . I gave system number for XI : 00 and EP : 02
Can any one help for this. Where did i made mistake.
Thanks
Kristene

Hi Kristene,
I have installed XI and EP on the same server (for test purposes) without any problems, so it should be possible. I installed them in a different order (first EP then XI), but I don't think that matters much.
The only real difference is that I kept the system number the same.
What do you mean exactly with not being able to access the XI j2ee engine? How did you try to access it?
Regards,
Martin

Special Characters issue in DEV and QAS

Hi,
I am uploading a file that has special characters (Japanese).
In the DEV system the special character is converted to #. Which the business wants.
In QAS system the special character is not converted and is as it is, which makes the business users difficult to find out if any speical characters are there and they don't want the special character as it is
The file consists millions of record with a possibility of four or five records with special characters
The special characters on keyboards is not an issue.
The programs in DEV and QAS system are same and the file tested is also the same but different results.
Tried in Tcode SNLS to find something but didn't know what and where to look into.
What could be the issue in this? Looks like this is Basis issue but would like to know if anyone can let me know.......
Regards
Sandeep

Hi ,
i want to check ur open dataset statement in the program which is being used here if at all in ur case.
Can you please check the relavant code page in both the D and Q systems and search with the appropriate hexa decimal values(for the special characters ) in both the systems ..
u can use code page by tcode scp ..
ex -> as u say a special char sp1 is having entry in q and code page which is being used (like 4200 )
is not having in d03 .
then if in d03 this page has no entry then it shows as # , since it is showing in q then it has an entry over there. this is my guess..
so if at all the client wants not to see this special char's , u need to remove them from this code page.. and check ..
Cant say if this can solve but u can take this as one more way of dealing with code pages and special chars....
br vijay..

Using same webdypro iview with DEV and QAS

Dear Sir,
We have the webdynpro program iview in EP 7.0 , however, I would like to change the same webdynpro iveiw with different client in Sap DEV and QAS, Is it possible? Or how to change the connection to SAP system.
Please kindly advise.
Thank you and best regards,
Vimol

Vimol,
Yes, you can do it.
Procedure :
Logon to NWDS : -> Windows-> Preferances->J2ee Engine
First mention the QAS system on which you want to deploy the application.
Then change these parameters and point to the DEV system.
Now, you have finished deploying the application in both the servers successfully.
1.Logon to the QAS system
http://fqdn:portnumber/sld
2.login as a J2ee_admin
3.Create a technical system and test the jcos that you are using in your application there. After the JCOs are tested and pinged successfully, run the application and test.
4. Finally, create a web dynpro iview and assign it to the users or roles you want.
Repeat the same steps for your DEV system and you are good to go.
Hope this helps.
Cheers,
Sandeep Tudumu

PRD installation in a differenet domain than DEV and QAS

Dear Experts,
I need to install SAP ECC 6 and PI 7.1 on production servers.Our dev and qas servers are running in the domain X(for eg) and the PRD servers are in the domain Y(for eg).All the servers are supposed to be in the same landscape.Do I have to include the prd servers also in the same domain as dev and qas or will it cause any issues running them in different domain ?If it gives issues pls let me know the the kind of issues it will be as I need to give my IT team proper reasons to run all the servers in the same domain.
I know some reasons like servers should be in the same domain if we use common transport directory.
Please let me know if there are any other reasons.
Regards,
Dinakar
Edited by: mutnuru dinakar on Apr 13, 2011 7:19 AM

Hi Sunny,
Thanks.your notes are helpful.From PI point of view,running dev PI and prd PI in different domains will cause any issues?
Suggestions of others will also be appreciated.
Regards,
Dinakar
Edited by: mutnuru dinakar on Apr 18, 2011 1:44 PM

Not able to comapre roles in DEV and QAS using SUIM?

Hi,
I am trying to compare role in both DEV and QAS, DEV and PRD using SUIM t-code.
While comapring its showing that roles are in different systems, not able to comapre.
Actually role exisitng in both QAS and PRD.
Individually I can login to QAS, PRD can see the role.

For role comparision both the roles must be in the same system, in same client
Transaction code SUIM -> Comparision-> Roles
If the roles are in different system, then tranport the role into one of the system and do comparision. If no transport connection defined then, you can use the upload and download option in the PFCG
comparing
Run the t-code SUIM
Go To Comparison and select the option of roles
Click on Across systems option it will give option to select the sys name under Remote Comparison there enter the SYS ID between which system you want to do comparison and put the role name in compare role section then execute it will give you the result.
If there is any difference b/wn the t-codes it will b in red colour otherwisein yellow.

I have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3

i have adobe design std. 6 i wanted to install photoshop and acrobat pro on my windows xp sp3. i am not able to install acrobat it is showing folowing error. my email id is [email protected]
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW024, DW065 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS6 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW065: Display requirements not met for {0327A4BF-62BF-48BB-8928-B971B749E9E1} Creative Suite 6 Design Standard 6.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1406.Could not write value DisableExceptionChainValidation to key \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\Acrobat.exe. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Hi Rizwan,
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5 -cs5.html for information on how to review your installation logs

Have new computer want to install CS5 and deactivate from old. but need an older verison as cs5 is an update

I have a new computer , want to install CS5 and deactivate from old. Problem is my CS5 is an upgrade and needs a older version of Elements which I no longer have. Any suggestions?

you don't need the previous version that was upgraded. you just need the serial number of the previous version.
but, if you want the previous version:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

What is CTS ? what is the role of CTS in between DEV and QAS?

Dear
What is CTS ? what is the role of CTS in between DEV and QAS?
Thanx & Regards
Mohamamd Nabi
[email protected]

hello, friend.
actually, you can search for subjects like this in the threads archive. you will be pleasantly surprised to find that there are already many threads with similar issues and that you can find answers to even more otherwise unrealized questions. and you don't have to wait for anyone to reply.
it looks like the issue is urgent for you, and this is why i am attaching this feed from Sadhu Kishore, which was posted some time ago... (if he replies to your thread, you may choose to award him points).
"Hi,
The transport workflow provides a framework for transporting enhancements or new developments of existing business functions in a system landscape. It provides a direct connection between development and transport administration. The transport workflow manages the transport process, determines the user for each individual step automatically, and then displays an interface which they can use to perform the task directly.
It is an efficient method of transporting a selected number of requests into a group of transport targets, and uses clearly defined approval steps to ensure the quality of your target systems. The requests can be transportable change requests, Customizing requests, relocation transports or transports of copies. The transport targets do not need to be located on defined transport routes. However, the transport workflow can involve some risks, caused by the dependencies between transport requests:
Import sequence
It is important that you import requests in the correct order, so that development work is up-to-date in the target system.
Incompleteness
It is important that the functions transported in the transport proposal are complete; otherwise errors may occur in the import system.
A request is not imported, but it contains an important data element. You use another request to transport a table that references this data element. Since the referenced data element does not exist in the target system, activation errors will occur when you import the second request.
The transport workflow is a generic workflow. Its ability to process the transport route configuration in TMS enables it to adapt itself to any system landscape. This means you can transport multiple requests into multiple targets, even if these targets are not located on the transport routes.
This reduces the amount of work for the transport administrator significantly. The automated nature of the workflow also reduces the likelihood of errors during transports.
You can use the transport workflow in two different ways.
Transport workflow as a transport strategy
If you have production systems in your landscape that can only accept approved transports, we recommend that you use the transport workflow to organize and coordinate the transport process.
To do this, set Workflow-controlled transports as your transport strategy and configure the transport workflow.
When you release a transport request, the transport workflow starts automatically and the screen Create Transport Proposal appears. The requests are then released implicitly when the transport proposal is sent to the transport administrator.
Special transport workflow (mass transports)
You can use the special transport workflow to make transports that do not follow the defined transport routes or that take place outside the normal transport schedule (part of the mass transport strategy). These transports may be corrections made in the development system that have to be transported into the production system without delay.
To use the special transport workflow, set Mass transports as your transport strategy and configure the transport workflow."
thanks. you have been most generous.
regards.

Importing Program from Production System to DEV and QAS.

Hi All,
I have 3 Systems in my Landscape.
DEV-> QAS-> PRD
One of my Z program is running in the Production system.
This Z program is got deleted in the DEV and QAS.
How can I import the Program from Production System to QAS and DEV.
Regards,
Viji.

hi Vijaya laxmi,
you can goto Production system ---> SE38/ SA38 and copy the program and create the same in program using SE38 in Development system and then transport it to Quality system.
You can also Re-Import the Request from Production to Dev system.
Thanks,
Nelson
Edited by: Nelson karunakar on Sep 18, 2008 7:15 AM

I want to install DEV and QAS on same Server

Similar Messages

Maybe you are looking for