I WANT TO PICK UP RFQ DATE ( REQUEST FOR QUATATION ) ?

I WANT TO PICK UP RFQ DATE ( REQUEST FOR QUATATION ) .
please tell me how to find RFQ Creation date.
i used RM06E-ANFDT .
but RM06E is the structure .
i want the table name from which i can find RFQ DATE .
PLEASE HELP ME.

Hi Sandeep,
try vbak...
Regards,
Kaveri

Similar Messages

HT4157 I want to set up my data plan for my iPad however I am in Germany for the next 3 months. Will this plan work the same here as it would in the US? Is there anything I would need to do in addition to get the service I need out here?

I just moved to Germany and want to set up the data plan for my iPad. I currently have the iPad linked to at&t however have not yet set up service. I am afraid that I will pay for it and not be able to use it out here. Will the standard at&t cellular data plan work in Germany or am I out of luck??

BobTheFisherman wrote:
http://www.apple.com/ipad/LTE/ Note that Germany is included in the list for LTE depending on your iPad model.
but not an AT&T as clearly stated by OP ( unless you can use a Verizon/Sprint model on AT&T )
Looks like we both need to read the OP more carefully

Encoding UTF-8, Wrong data request for filter

Hi all,
I'm using the folowing filters in my App.
I also use the charset UTF-8.
In the QueryString Parameter $filter, 'RÜCK' becomes 'R�CK'.
The Request URL looks like this: ....and%20IVstatex%20eq%20%27R%ef%bf%bdCK%27....
When i start my app the filter RÜCK doesnt work, but there is no error message. I just getting wrong selected data. All other filters are working correct. Only German Ü, Ä, Ö dont work. How can I fix this problem?
Thanks.

Problem solved!!!
I used the Hex unicode \u00DC for Ü.

BAPI/ FM FOR Request For Quatation(RFQ)

Hi Gurus,
could anyone tel me BAPI/FM   for RFQ.
Thanks in Advace.

Thanks for ur reply,
I need   BAPI for   RFQ_GETLIST.
could u tel me anyone for this   BAPI/FM.
Thanks in advance.

Picking Month from Date in ABAP query

Dear All,
I want to pick month from date in a abap query but it is giving error "BDTER" is not a valid comparison operator. comparison operator.
Where i am wrong my query is below.
SELECT SUM( BDMNG ) AS BDMNGT FROM RESB INTO CORRESPONDING FIELDS OF IT_MRP
WHERE MONTH( BDTER ) = '12'.
With Regards
Ashwani K Mathur

Dear Deepankar,
Thanks for reply.
Date fomat is yy/mm/dd (like 20071231) after your suggestion i have modified query.
SELECT SUM( BDMNG ) AS BDMNGT FROM RESB INTO CORRESPONDING FIELDS OF IT_MRP
WHERE BDTER+4(2) = 12.
but while compiling it is giving error Field "BDTER+4(2)" unknown.
Please suggest.
Ashwani K Maathur

Deleting Master Data Requests in a Process Chain

Hi All,
I need to delete and reload master data in a process chain. I created an ABAP program that uses the function module "RSDMD_DEL_MASTER_DATA" to delete the master data. I invoke this program from my process chain, and this is working well. My master data is being deleted nicely.
Question, however. I noticed that this does not delete the actual data request for that InfoObject. If I manage that attribute, I still see the request appearing, eventhough I see no records when I select the option to maintain master data.
Can anyone tell me how I can delete the requests for master data, and how this can be done through a process chain?
Your assistance would be greatly appreciated.
Thank you,
John Stabile

Hi John,
I created a program giving the name of the master data object. Using this object, I found the request entries from rsiccont
Then I check these found entries in rsbkrequest, so as to find the status is successful.
rsbkrequest-tstate eq '2'.
rsbkrequest-ustate eq '2'
see the total code below.. you can copy paste the same
*TABLES
tables: rsiccont.
*SELECTION SCREEN
selection-screen begin of block a01 with frame title text-t01.
select-options : s_icube for rsiccont-icube obligatory.
parameter: p_num type i obligatory.
parameter: p_test as checkbox.
selection-screen end of block a01.
*Internal Table Definition
types: begin of t_rsiccont.
        include structure rsiccont.
types: recno like sy-tabix,
       end of t_rsiccont.
data: i_rsiccont type standard table of t_rsiccont with header line,
       i_rsiccont_ok type standard table of t_rsiccont with header line,
       i_rsbkrequest type standard table of rsbkrequest with header line.
*Work areas
data: wa_rsiccont type t_rsiccont.
*Variables
data: lv_rnr   type rsiccont-rnr.
*AT SELECTION SCREEN
at selection-screen on s_icube.
select single rnr
    into lv_rnr
    from rsiccont
    where icube in s_icube.
if sy-subrc ne 0.
    message 'InfoCube not found' type 'E'.
endif.
*START-OF-SELECTION
start-of-selection.
select * up to p_num rows
    into table i_rsiccont
    from rsiccont
    where icube in s_icube.
if sy-subrc eq 0.
    select *
      into table i_rsbkrequest
      from rsbkrequest
      for all entries in i_rsiccont
      where requid eq i_rsiccont-rnsidlast.
   if sy-subrc eq 0.
      loop at i_rsiccont.
        read table i_rsbkrequest with key requid = i_rsiccont-rnsidlast.
*check if status is = 2.
        check sy-subrc eq 0.
        check i_rsbkrequest-tstate eq '2'.
        check i_rsbkrequest-ustate eq '2'.
*actual mode -> delete the recrod!
        if p_test is initial.
          call function 'RSSM_PROCESS_REQUDEL_MDT'
            exporting
              i_dta     = i_rsiccont-icube
              i_request = i_rsiccont-rnr.
        endif.
        append i_rsiccont to i_rsiccont_ok.
      endloop.
    endif.
endif.
*display list of all request numbers deleted!
write: 'List of delete request numbers'.
uline.
skip.
loop at i_rsiccont_ok.
    write: i_rsiccont_ok-rnr.
    skip.
endloop.
=====================================================
You may need to correct the formatting
Edited by: Shailesh Khandarkar on Nov 11, 2009 7:42 AM
Edited by: Shailesh Khandarkar on Nov 11, 2009 7:46 AM

Error of Creating Data Server for XML

Hi all,
When I want to create a new data server for XML in ODI, the error occur.
error information:
connection failed
java.sql.SQLException: Unexpected token: EMP_TABLE in statement [create EMP_TABLE]
My JDBC url is: jdbc:snps:xml?f=../demo/xml/MOP/MOPEMP.xml&rt=Export&ro=false&case_sens=true&s=EMP
It seems that the error is caused by the schema "EMP". But when I changed the name of schema, the error still occur...
Could you give me some advices about this?
Thanks&Regards
Yan

Hi,
Thans for your reply.
This is the DTD for my xmldoc.
<!ELEMENT Data (Department+)>
<!ELEMENT EmployeeID (#PCDATA)>
<!ATTLIST EmployeeID col (EMPID) #IMPLIED>
<!ELEMENT Education (EmployeeID, Sequence, Dgree)>
<!ATTLIST Education table NMTOKEN #IMPLIED>
<!ELEMENT Employee (EmployeeName, EmployeeID, DepartmentID, Education*)>
<!ATTLIST Employee table NMTOKEN #IMPLIED>
<!ELEMENT EmployeeName (#PCDATA)>
<!ATTLIST EmployeeName col NMTOKEN #IMPLIED>
<!ELEMENT DepartName (#PCDATA)>
<!ATTLIST DepartName col NMTOKEN #IMPLIED>
<!ELEMENT Table (Column+)>
<!ATTLIST Table importType NMTOKEN #IMPLIED>
<!ATTLIST Table parentTable NMTOKEN #IMPLIED>
<!ATTLIST Table tag NMTOKEN #IMPLIED>
<!ATTLIST Table columns NMTOKEN #IMPLIED>
<!ATTLIST Table name NMTOKEN #IMPLIED>
<!ELEMENT DepartID (#PCDATA)>
<!ATTLIST DepartID col NMTOKEN #IMPLIED>
<!ELEMENT MetaData (Table+)>
<!ELEMENT Sequence (#PCDATA)>
<!ATTLIST Sequence col NMTOKEN #IMPLIED>
<!ELEMENT Dgree (#PCDATA)>
<!ATTLIST Dgree col NMTOKEN #IMPLIED>
<!ELEMENT Export (MetaData, Data)>
<!ELEMENT DepartmentID (#PCDATA)>
<!ATTLIST DepartmentID col NMTOKEN #IMPLIED>
<!ELEMENT Column (#PCDATA)>
<!ATTLIST Column deleteKey NMTOKEN #IMPLIED>
<!ATTLIST Column isKey NMTOKEN #IMPLIED>
<!ELEMENT Department (DepartName, DepartID, Employee+)>
<!ATTLIST Department table NMTOKEN #IMPLIED>
Thanks again!
Yan

Purchasing mini data projector for MacBook Pro. What works together?

I want to purchase a mini data projector for my MacBook Pro. Does anyone have a recommendation of what I should look for in a projector or what would work with my MacBook? Is a MacBook a VGA display? I want a data projector that is very sharp. Any suggestions?

if you do not have a Mini DVI, that leaves only about 80 models of MacBooks.
Which one do you own?

Invoice Coreection request for Debit Process

hi
I wanted to use the Invoice correction Request for the Debit Process
I have invoices customer for 10 pieces instead of 12 Pieces , so I need to correct the Invoice and need to get money for the remaining 2 qtys.
Customer wants to do the same throught Invoice Correction Process.
The Standard Process Allows to create the Crdeit Memo in negative Posting in this Above case,
How could i do correct postings by debit memo
Because I tried creating new INvoice correction document and did copy control , by when i create the invoice , the debbit memo is for 22 pieces , pls
advice me on correct confoguration

the default qty shows is 10
and i need to crroect the qty to 12 in the secind line item , the amount show should be for 2 , but it sows as gross amount for 22 qtys
how could I do it
DInesh

REQUIRE One spool request for n copies in one print command in smartform

Hii Friends,
          I created a smartform..I require 5 copies of that form..There is a text which needs to be changed in evry copies...eg Original in first copy
                        Duplicate in second copy
                        Triplicate in third copy....n so on
So i used a loop n i am calling smartform 5 times....The problem is i need one spool request to be created..
Note: By default sometimes it create one spool request and sometimes 3 spool request...
Pls share your inputs ............
Thanks,
Regards,
Sujit.

hi,
this is more complicated see below description from help
regards,darek
Printing Several Forms in One Print Request
Use
You want to bundle several forms into one print job.
Print Request vs. Spool Request
SAP Smart Forms allows you to bundle several forms to form one output unit. This output unit is called a print request. A print request is different from a spool request:
Whether a new spool job is created in the spool depends on the settings in the spool dialog.
Whether a new print request starts depends on the standard parameters of the generated function module you set in SAP Smart Forms. For each print request, the spool dialog is called only once. If you suppress the dialog, you can pass parameters for spool processing only at the beginning of the print request.
This means that a print request gathers several forms before submitting them to spool processing. Thus they cannot be spread over several spool requests. Vice versa however, you can include several print requests into one spool request.
Procedure
Use function module SSF_FUNCTION_MODULE_NAME to retrieve the name of the function module generated from the Smart Form (see also: Integrating the Smart Form Into the Application).
Call the Smart Form for the first time and set the NO_CLOSE parameter of the control structure. This prevents the print request from being closed after accepting the output of the Smart Form and allows you to include all other form output into this print request as well. Leave the NO_OPEN parameter empty.
Instead of calling the Smart Form for the first time you can also call function module SSF_OPEN .
If you want to start a new spool request for the print request, set the TDNEWID field of the Output Options in this first call.
For all other form output of the application program that you want to include into the print request, use a loop to set both the NO_OPEN field and the NO_CLOSE field of the control structure.
To close the print request, in the call of the last Smart Form set the NO_OPEN parameter and unmark the NO_CLOSE parameter.
Instead of calling the Smart Form for the last time, you can also call function module SSF_CLOSE .
Result
The forms you called in the steps described above are included into one print request. If in the first step you started a new spool request, you can now view its status in the spool request overview (transaction SP01 ).

"Date Modified" for all files being changed if "Automatically write to XMP" is on

Recently upgraded from LR3 (v3.4.1) from LR2 on OSX 10.6.8 and have always had Catalog Settings > Automatically write changes into XMP turned on.
When browsing existing JPG files in my Library (no Develop changes, no keywording, no Presets, no Import), LR3 is writing to disk — i.e., when I look at files in Finder, almost every viewed file’s “Date Modified” is being set to today’s date and time. (It actually creates a .swp file, then changes it's name back to .jpg)
This is really bad, as it's making it impossible for me to use Finder to figure out when I last worked with a file, it is triggering needless Time Machine and Backblaze backups, and unnecessarily churning my disk.
If I turn off "Automatically write..." this behavior stops. Per David Marx at thelightroomlab.com, I tried turning off this preference, manually doing a "Save Metadata to File" for all files, letting that complete, then turning the preference back on. This does not solve the problem.
Per a suggestion at photoshop.com, I used ExifTool to see what changes LR was writing to a sample file; from the diff below, you can see that LR is adding a bunch of new fields as well as moving other fields around. But my point is that LR3 should never overwrite a file on disk if all I am doing is browsing thru them.
Is anyone else seeing this? Any ideas would be greatly appreciated!
-- David
diff Exif5609_original Exif5609_update
2c2
< FileName: DSC_5609_original.JPG
> FileName: DSC_5609_update.JPG
5,6c5,6
< FileModifyDate: 2009:11:27 21:32:54-08:00
< FilePermissions: rwxr-xr-x
> FileModifyDate: 2011:08:07 22:06:47-07:00
> FilePermissions: rw-r--r--
27a28,29
> ShutterSpeedValue: 1/200
> ApertureValue: 7.1
55d56
< SerialNumber: 3209521
75d75
< Lens: 18-200mm f/3.5-5.6
185,188d184
< UserComment:
< SubSecTime: 00
< SubSecTimeOriginal: 00
< SubSecTimeDigitized: 00
211a208,299
> XMPToolkit: Adobe XMP Core 5.2-c004 1.136881, 2010/06/10-18:11:35
> CreatorTool: Ver.1.00
> MetadataDate: 2011:08:07 22:06:47-07:00
> SerialNumber: 3209521
> LensInfo: 18-200mm f/3.5-5.6
> Lens: 18.0-200.0 mm f/3.5-5.6
> ImageNumber: 26634
> RawFileName: DSC_5609.JPG
> SavedSettingsName: Import
> SavedSettingsType: Snapshot
> SavedSettingsParametersVersion: 6.4.1
> SavedSettingsParametersProcessVersion: 5.0
> SavedSettingsParametersWhiteBalance: As Shot
> SavedSettingsParametersIncrementalTemperature: 0
> SavedSettingsParametersIncrementalTint: 0
> SavedSettingsParametersExposure: 0.00
> SavedSettingsParametersShadows: 0
> SavedSettingsParametersBrightness: 0
> SavedSettingsParametersContrast: 0
> SavedSettingsParametersSaturation: 0
> SavedSettingsParametersSharpness: 0
> SavedSettingsParametersLuminanceSmoothing: 0
> SavedSettingsParametersColorNoiseReduction: 0
> SavedSettingsParametersChromaticAberrationR: 0
> SavedSettingsParametersChromaticAberrationB: 0
> SavedSettingsParametersVignetteAmount: 0
> SavedSettingsParametersShadowTint: 0
> SavedSettingsParametersRedHue: 0
> SavedSettingsParametersRedSaturation: 0
> SavedSettingsParametersGreenHue: 0
> SavedSettingsParametersGreenSaturation: 0
> SavedSettingsParametersBlueHue: 0
> SavedSettingsParametersBlueSaturation: 0
> SavedSettingsParametersFillLight: 0
> SavedSettingsParametersVibrance: 0
> SavedSettingsParametersHighlightRecovery: 0
> SavedSettingsParametersClarity: 0
> SavedSettingsParametersDefringe: 0
> SavedSettingsParametersHueAdjustmentRed: 0
> SavedSettingsParametersHueAdjustmentOrange: 0
> SavedSettingsParametersHueAdjustmentYellow: 0
> SavedSettingsParametersHueAdjustmentGreen: 0
> SavedSettingsParametersHueAdjustmentAqua: 0
> SavedSettingsParametersHueAdjustmentBlue: 0
> SavedSettingsParametersHueAdjustmentPurple: 0
> SavedSettingsParametersHueAdjustmentMagenta: 0
> SavedSettingsParametersSaturationAdjustmentRed: 0
> SavedSettingsParametersSaturationAdjustmentOrange: 0
> SavedSettingsParametersSaturationAdjustmentYellow: 0
> SavedSettingsParametersSaturationAdjustmentGreen: 0
> SavedSettingsParametersSaturationAdjustmentAqua: 0
> SavedSettingsParametersSaturationAdjustmentBlue: 0
> SavedSettingsParametersSaturationAdjustmentPurple: 0
> SavedSettingsParametersSaturationAdjustmentMagenta: 0
> SavedSettingsParametersLuminanceAdjustmentRed: 0
> SavedSettingsParametersLuminanceAdjustmentOrange: 0
> SavedSettingsParametersLuminanceAdjustmentYellow: 0
> SavedSettingsParametersLuminanceAdjustmentGreen: 0
> SavedSettingsParametersLuminanceAdjustmentAqua: 0
> SavedSettingsParametersLuminanceAdjustmentBlue: 0
> SavedSettingsParametersLuminanceAdjustmentPurple: 0
> SavedSettingsParametersLuminanceAdjustmentMagenta: 0
> SavedSettingsParametersSplitToningShadowHue: 0
> SavedSettingsParametersSplitToningShadowSaturation: 0
> SavedSettingsParametersSplitToningHighlightHue: 0
> SavedSettingsParametersSplitToningHighlightSaturation: 0
> SavedSettingsParametersSplitToningBalance: 0
> SavedSettingsParametersParametricShadows: 0
> SavedSettingsParametersParametricDarks: 0
> SavedSettingsParametersParametricLights: 0
> SavedSettingsParametersParametricHighlights: 0
> SavedSettingsParametersParametricShadowSplit: 25
> SavedSettingsParametersParametricMidtoneSplit: 50
> SavedSettingsParametersParametricHighlightSplit: 75
> SavedSettingsParametersSharpenRadius: +1.0
> SavedSettingsParametersSharpenDetail: 25
> SavedSettingsParametersSharpenEdgeMasking: 0
> SavedSettingsParametersPostCropVignetteAmount: 0
> SavedSettingsParametersGrainAmount: 0
> SavedSettingsParametersLensProfileEnable: 0
> SavedSettingsParametersLensManualDistortionAmount: 0
> SavedSettingsParametersPerspectiveVertical: 0
> SavedSettingsParametersPerspectiveHorizontal: 0
> SavedSettingsParametersPerspectiveRotate: 0.0
> SavedSettingsParametersPerspectiveScale: 100
> SavedSettingsParametersConvertToGrayscale: False
> SavedSettingsParametersToneCurveName: Linear
> SavedSettingsParametersCameraProfile: Embedded
> SavedSettingsParametersCameraProfileDigest: D6AF5AEA62557FCE88BC099788BBD3CC
> SavedSettingsParametersLensProfileSetup: LensDefaults
> SavedSettingsParametersToneCurve: 0, 0, 255, 255
> IPTCDigest: d41d8cd98f00b204e9800998ecf8427e
228,230d315
< SubSecCreateDate: 2009:11:27 21:32:54.00
< SubSecDateTimeOriginal: 2009:11:27 21:32:54.00
< SubSecModifyDate: 2009:11:27 21:32:54.00
http://feedback.photoshop.com/photoshop_family/topics/lr3_date_modified_for_all_files_bein g_updated_when_browsing_photos_if_catalog_settings_automatically_write_changes_into_xmp_is /replies/6313647

clvrmnky wrote:
davidpope007 wrote:
Then when LR3 loaded my old LR2 images into memory, it "dirtied" the in-memory copy of the file by adding in these new LR3 XMP fields. Then, because I had "Automatically write XMP" on, it said "I better write these changes to disk".
Yuck. As a former software engineer, this is very bad software engineering.
It should wait until the user dirties the file (via Develop, keywords, etc.) before presuming to add a bunch of metadata fields that are unique to the new version of LR3.
Well, I'm a current software developer, and this is, really, a perfectly reasonable thing to do. It is a reasonable trade-off for a convenient feature required by a small subset of users.
Yes, in most cases the in-memory copy should "never" be dirtied unless the user makes a gesture of some sort, but like I said earlier, this option (once set by the user) sets up the situation where this gesture becomes implicit. This is a clear trade-off for the sake of convenience. And if the XMP is out of date and needs to be updated en masse, so be it.
The fact is, there is no easy way around this. Do we save up /every/ dirty buffer somehow until you make a gesture that /might/ require the XMP to be up-to-date before acting on that gesture? Now we have to worry about unflushed buffers if something goes wrong and the app exits. Do we save the buffers to the DB? Now we have to block some calls to make another blocking call to flush some or all of those to DB, and then write some or all of it out to one or more files. In what order? What if there is a gesture to have X files with up-to-date XMP and some or all of those are in unflushed buffers, unflushed DB writes or we have to wait for the DB.
As you can see, this is a transactionality nightmare, and the easiest and safest thing to get what the user wants (i.e., up-to-date XMP for the purpose of talking to a third-party XMP aware app) is to simply update the sidecar or XMP block in an atomic manner using the correct file IO. The file will have to change at some point, so it may as well be now.
[Thanks to both of you for your detailed replies. I am aware of the need for tradeoffs so when you say the approach taken is quite reasonable, I do believe you. I also apologize in advance for the length of the following and am extremely aware of the time it must have taken you to compose the above replies, but I'm going to add a bit more, if only for my own piece of mind and in hopes of coming up with a solution for my workflow.]
From my naive point of view, I was expecting the answer to be simply "don't raise the XMPDirtyFlag upon reading in a file". Obviously if your architecture requires you to "upgrade to latest XMP format" upon read, and another part of the system auto-detects "out of date XMP", then it's going to write those changes to disk.
But it didn't need to be designed that way. LR obviously has mechanisms to know when a user has made a change to XMP so it is able to write XMP changes to disk only when necessary.
The promise (to me) of "Automatically Write XMP changes to disk" was to auto-save my changes, and not those made for any internal (i.e., XMP versioning related) changes.
Perhaps the premise is that it is LR3's job to update an individual file's XMP to the latest version so that other XMP-aware apps can make use of it? I would argue that those third-party XMP-aware apps already have to know how to deal with all prior versions of XMP, so LR3 should just leave well enough alone.
You asked if my problem with your approach was that it was "inelegant"; not at all, it is based on my own perception of what I need from my workflow, so let me describe that so maybe we can find a better way:
* Part of the appeal of LR to me is that it preserves my original file as it came off the memory card, allowing me to move to a different workflow/toolset in 2025 if I choose to do so
* However, with all of changes contained in a single database file, I'm concerned about rare (but possible) corruption, so to mitigate this risk, I let LR backup my database weekly and it's also backed up continuously in the cloud via Backblaze
* Even with backups of the database, there is still a chance that I could lose changes made to individual files (e.g., LR corrupts the DB and I have to go back to last week's DB)
* Thus the appeal of the "auto-write to XMP" flag -- that way critical changes (develop, crop, keywords) are saved on a per-file basis; I liked the "automatic" part of this (as opposed to a manual save) because then I don't have to teach others in my family how to manually save XMP changes
* A nice side-effect of this setting is now when I use Finder to find a file and double-click on it to edit it in Photoshop, all my develop changes are right there; (in other words, I like the flexibility of not having to fire up LR in order to just invoke PS from within it); also when I use Bridge I see all the keywords there
* So with LR2, I had gotten used to what I thought was the best of all worlds -- autosave of changes at the file level via XMP + raw negatives untouched (i.e., Date Modified == the date I took the picture); this allows me to use operating-system-level tools -- Finder -- to locate/search for files
* Now I upgrade to LR3 and I'm finally now understanding that a concept "XMP versioning" is going to result in changes to many, but not all my files. (That's something else that's annoying about this issue -- I open up the Grid and browse a folder of files, and only seemingly random ones I've cursored over seem to get written to disk -- if it's so urgent that LR3 update the XMP, then it should do it for all the files in the catalog or at least in that directory)
Here's a screenshot from Finder of what I see everytime I look at this folder:
* So now I have to assume that each new version of XMP and/or LR is going to touch my files on disk. Sigh.
* What I don't like about this is that it is ruining the promise of "untouched raw negative". Yes, the image data is untouched -- which I agree is most of the benefit; but the file has been touched.
* Perhaps you might empathize a bit more if you imagined that someone went thru all your source code or Word files and randomly changed the date to "today" because you upgraded compilers or moved to Word 2011.
I agree all of this would be solved by having an XMP sidecar file for JPGs, but you indicate that's not going to happen.
You've also alluded to the solution of "resetting the Date Modifed" to it's original value -- which I believe is what Finder does when you move or copy a file -- but that that is fraught with issues as well. I believe you when you say there are issues, but again the naive part of me wonders why that soultion would be so bad...
I just thought of another potential solution -- turning on Date Created in Finder -- but it turns out that's changed, too.
I am really at a loss as to what to do and would welcome your suggestions.
Thanks again and kind regards,
-- David

Old transport request for sap script (form)

Hi,
I want to find the old transport request for the sapscript(form). Just now it has been over written by the latest CTR. So i need to transport the old one.
How to find out the old transport request.
Thanks,

Try giving the script name in OBJ_NAME field in table E071 and then execute and it will give you a list of all transports. You can sort it in descending and see the order of transports.
Thanks,
Srinivas

How to create the request for change of selection text into other language.

Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
Thanks

Hello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved.

I want to pick up Schedule line Delivery date based on Sales Order of Mater

Hi Experts,
I have one scenario like,
I want to pick up Schedule line Delivery date based on Sales Order of Material.
For example :
Go to va03
Give the order no
Press the enter
Double click on material.
Go to Schedule line Tab
Then we can find out the Delivery date .
I want to pick up the that Delivery date. Could you please help on that.
Thanks,
Amjad.

Hi,
schedule line dates are available in VBEP.
VBEP-VBELN = sales order number.
VBEP-EDATU = schedule line date.
REgards,
Raghavendra

From date column I want to pick the hours only......

Dear All
I am facing the following problem.
I having following date format in database of date column
4/7/2006 10:26 AM
4/7/2006 07:18 PM
from this date column I want to pick the hours only , For ex. 10, 07 resp.from the above record.
I tried it to solve using SUBSTR and LTRIM-TRIM function, but this functions will truncate the time format and so unable to pick the Hours.
Is there any other solution for this.
Also the date column I have is in 12 Hours(AM/PM) format I want to convert it into 24 Hours . Like 07 PM . I want it to 19.
Thanks
Vishal.

TEST@db102 SQL> select * from test;
C1
4/7/2006 10:26 AM
4/7/2006 07:18 PM
TEST@db102 SQL> select to_char(to_date(c1,'dd/mm/yyyy hh:mi PM'),'hh24') from test;
TO
10
19
TEST@db102 SQL>

I WANT TO PICK UP RFQ DATE ( REQUEST FOR QUATATION ) ?

Similar Messages

Maybe you are looking for