I want to reverse or reset the reversal document

Hi All,
Please help me whether & how a reversal document can be reversed or resetted. There is a write off doc which was reversed, I want to reverse/reset the reversal document.
Thanks & Warm Regards,
Kapil Nehra

Hi Kapil,
When you have a reversed a document, they'd become open again right?
If you want to set them off again, suggest you to use account maintenance using either FP06 or FPMA.
Then they would go back to old status.
Clear?
Rgds
Rajendra

Similar Messages

  • Reversing and Resetting the Excise Invoice No. in Sales

    Hi Gurus,
    Kindly give me solution to reverse and reset the excise invoice after billing.  The client has created manual invoice and manual excise nos. have been given for few documents and invoice has been despatched to the party.  When they are updating the same in SAP, the system shows that the excise document number already exists in the system due to which there is a mismatch in manually given number and SAP generated excise document number.  As the manual number has already been advised they want the same number to be in SAP.  Is there any possibility of resetting the SAP excise invoice number ?
    Sadashivan

    Dear Sadashivan,
       I am just going through your message and its very surprising that you are entering excise invoice number manually while creating the exise invoice. As per my understanding you CANNOT assign external (as per you manually entering excise number) number ranges for CIN objects. The reason is excise invoice number should always be in order. If you are creating excise invoice by entering manually excise invoice then this is not SAP standard procedure.
       Please check whether you are following the standard SAP functionality while creating excise invoice or not. Check whether you are using your own development?
       Regarding resetting the number range in transaction SNRO or SNUM will not solve your purpose. As excise invoice is already been updated in different tables.
    Dear Lakshmipathi,
          Kindly check this "resetting number ranges in SNUM", will give error message while creating excise invoice.
    Regards
    MBS

  • Only reseting the cleared documents with exchange rate differences in FBRA

    Hello,
    we want only reset the cleared documents . We dont want to reverse the cleard documents. But When we try to do it we get a message Exchage difference are posted do you want to reverse it. Want we want to reset are in Doc.. currency. postings for August.
    As i know when we have exchange rate difference we  dont get an option only resettng but we get reseting and reversing.
    May i know how to slove this situation.
    Thank you
    Chaithra

    HiI
    f you set this selection field then the settings in the ERD Setting column for this currency type are no longer relevant. The system calculates and posts exchange rate differences between order-related goods receipts and invoices not just for materials with standard price, but also for:
    Materials with moving average price
    Account-assigned transactions
    Planned delivery costs
    The valuation of the inventories or consumption is effectively done at the exchange rate for the goods receipt, and not at the exchange rate of the invoice. When you post the good receipts, the fixed exchange rate from the purchase order is not used, but the translation of the purchase order values to local currency is always done at the posting date of the goods receipt.
    If you are using the material ledger with actual costing, the system does not include the posted exchange rate differences at period-end closing in the actual prices of the materials.
    Regards
    Antony

  • I have a question : Someone want sell me Creative Suite 6 MAster Collection, He is gave me the key and want me to fill in the transfer document from adobe? If I accept and pay him for this do I be eligble to use this software in company ? He is offering m

    I have a question : Someone want sell me Creative Suite 6 MAster Collection, He is gave me the key and want me to fill in the transfer document from adobe? If I accept and pay him for this do I be eligble to use this software in company ? He is offering me full version of the product. How Can I check it ?

    There is no reason to do that. You can buy a legitimate copy of the product from Adobe.
    If the price is too good to be true, it's too good to be true. Caveat emptor.

  • Reversing & Resetting The Reversed Document using FBRA

    Hello All,
    Our client by mistake reversed a payment document while doing MR8M. Now they want to reverse the reversed document.
    I have tried FBRA again for the reversed document and it worked out and a new document got posted.
    Now let the orginal document be A which is reversed and reset using the document B.
    Due to wrong reversal of A again we used FBRA and posted document C which in turn reversed and reset B.
    Now if you check the orginal document A is available as an open item , earlier which was a cleared item. I want to know how can we make in back to a cleared item
    Regards
    Arun

    Hi All ,
    Thanks for the responses.
    My issue is resolved.
    Steps followed are.
    1. First rest and reversed the reversal document in FBRA. --> At this time the orginal document has again appeared in the line items as an open item.
    2. It was also identified that along with the orginal document which appeared as open item all the items which was cleared using the orginal document also became the open item.
    3. Now we have made the manual clearing of the line items uaing the transfer posting with clearing
    Regards
    Arun

  • Is possible Reset the reverse document ?

    I ask it because the system showed me >> u2018Resetting this reverse document is not possibleu201D

    Ailton,
    I am going to try to explain what is a reverse document and a cleared document.
    A reverse document normally is used to turn zero the amounts posted in some accounts.
    For example, you created a FI invoice to a vendor with the following characteristics:
    Item 01, Posting Key 31, Vendor number 001, Amount 1.000,00 BRL
    Item 02, Posting Key 40, Account number 33030001, Amount 1.000,00 BRL
    If you want to undo the invoice, this is not possible in FI module. What you can do is undoing the amounts posted in both vendor and account number, by creating the reverse document. Example:
    Item 01, Posting Key 21, Vendor number 001, Amount 1.000,00 BRL
    Item 02, Posting Key 50, Account number 33030001, Amount 1.000,00 BRL
    A cleared document normally is used to close the open item. An open item in FI module is a line item which depends on a cleared document to have its process closed. For example, let's say you didn't reverse the previous mentioned FI invoice. The vendor item needs to be cleared (imagine you should pay to the vendor 1.000,00 BRL and the cleared document will show to you the vendor has already been paid). Example:
    Item 01, Posting Key 21, Vendor number 001, Amount 1.000,00 BRL
    Item 02, Posting Key 50, Account number 33030001, Amount 1.000,00 BRL
    Hope you have understood all of this!
    Kind Regards,
    Daniel

  • What is the most appropriate way to do reversal and reconcile the reversed

    Dear All,
    I am facing a problem to reconcile reversal transaction. The scenario as below:
    Date 28.04.2008 Company A issue billing to Customer XYZ amount 3,000 MYR
    Date 30.04.2008 Company A want to reverse the above transaction.
    Questions:
    1.Where is the most appropriate menu path to do the reversal?
    2. If the reversal needs to be done via menu path: Financial module à Reversal Transaction, then how to reconcile both items to ensure system will read as cleared items?
    3.The purpose of Question no.2 due to have same result upon executing customer ageing report regardless using Journal Posting tab or
    using Sales Document tab.
    Thank you in advance for your kindly reply.

    For the function you mentioned :reverse transaction
    under the Financial module
    you could refer to note:1004113 for more detailed information
    To update a journal entry such that it will auto-reverse at a later date follow the steps below:
    1.  Go to Financials -> Journal Entry.
    2.  Open the journal entry that needs to be reversed.
    3.  Place a tick in the box 'Reverse' and a new field for the reversal
         date will be displayed.
    4.  Enter the date when this journal enrty is to be reversed and click
         on 'Update'.
    For the customer aging report ,there is one case that could explain the difference between 'by journal posting' and 'by sales document':
    In case an Invoice has been partially cleared by an Incoming
    Payment, the transactions created by these documents will be displayed
    as fully open when you run the report using Due Date by Journal Post.
    However, if you run the report using Due Date by Sales Doc., the Invoice
    will be displayed with its open amount only.
    A common occurrence is that exchange rate differences and/or conversion differences were posted without the user having specified to reverse them at a particular date.
    Could you explain more about your case?
    Best Regards
    Helen Sun

  • I want to change Quantity in the Billing Document.

    Hi,
    *+Order - related Billing+*
    I creat the Service sales order with 100 Quantity.
    While i am creating billing document System by defalt taking 100 Quantity.
    But  i want Bill Only 50 Quantity.
    Who to change the Quantity in the Billing Document.The quantity feild is gray mode.
    How to open quantity feied in the Billing document
    Pls Guide me
    Thanks
    Sriram

    Hi Sriram,
    Go to VTFA .Code which is the copying control.
    Select your appropriate entry(Sales order and billing document).
    Click on item.
    Choose the pos./neg. quantity as "+".Now it will allow you partial quantity.
    Regards,
    Mohan.

  • Resetting and reversing a cleared document

    Hello
    I want to reset and reverse a customer clearing document. The clearing document which is 54203512 was posted and matched against the customer invoice in the previous period. When reversing and resetting the document in transaction code FBRA, a pop up screen u201CReversal Datau201D appears. The reversal reason is specified as 01 (Reversal for incorrect posting), posting date is todayu2019s date however the original clearing document 54203512 was posted in 05.09.2008 and in previous period. Click on continue.
    The document is not reset and reversed and I am getting the error message u201CReversal reason 01 only permits posting date 05.09.2008u201D. Not sure why the document is looking at the posting date of original document even though I specified the reversal date as 08.10.2008. Can a document be reset and reversed in different periods?? Or does this cause any issues or problems? Or is this a bug??
    Thanks in advance
    Evelyn

    Hi,
    There are only 2 controls allowed for Reversal reasons:
    1.  Negative posting
    2.  Alternative date for posting
    The symptom you have mentioned would be of a control from somewhere else, i.e. either a user exit or a validation.  An order reason can only restrict it to current date or allow any other date.  At least that is what I have experienced.
    Cheers...

  • Reset and reverse

    hi,
    i have question on FBRA and FB08.
    1) only reset - i know it is from cleared to open item. i need to use FB08 to reverse.
    Q: if after reset i have 3 entries become open item, how to reverse these 3 entries via FB08?
    2) reset and reverse - this is reset from cleared to open item and followed by reverse the open items.
    Q : does it mean if i have 3 open items after reset, these 3 items entries will be reversed? means debit to credit and credit to debit?
    thanks

    Hi,
    Please understand that using FB08,you are reversing the payment document,but not the open items.
    Q: if after reset i have 3 entries become open item, how to reverse these 3 entries via FB08.
    A:It is not required.You need to reset the payment document but not all the 3 invoices which u refer above.
    If u still want to reverse these Invoices,use FB08 individually for each invoice.
    Q:does it mean if i have 3 open items after reset, these 3 items entries will be reversed? means debit to credit and credit to debit?
    A:Again I reiterate the point that you are reversing the payment document but not open items.
    Hope you understand the same.
    Thanks
    Aravind

  • What does it mean,resetting of clearing document and reversing of clearing?

    Hi SAPians,
    Suppose my clearing doc.no is say 100000.if i reverse it thru fb08,system will generate new doc no.m i rite?and the accounting impact will be like debit items will become credit and viceversa.but my doubt is if i only reset the clearing doc.no by FBRA then what will happen and what will be the accounting impact ? and what will happen if i reset with reverse the clearing doc. and what will be the accounting impact?
    Regards,
    Sumeya offrin

    Dear Sumeya,
    You have written "my clearing doc.no is say 100000.if i reverse it thru fb08,system will generate new doc no.m i rite?"
    You cannot reverse a cleared document in fb08.
    Now let me answer you other questions.
    Say for example you have posted a document no. 100005. Then using FB08, you Reverse it and a new CLEARING document no. is generated, say doc. no. 100006. So out here whatever entry posted in doc. no. 100005 gets reversed in document no. 100006. (ie. debit becomes credit & vice versa). This document no. 100006 is your clearing document. Now, both documents, ie. 100005 & 100006 contains no open items. Both documents are cleared against each other.
    Now when you only reset the cleared document no. 100006, it becomes an open line item document. There are no financial impacts. But, when you reset and reverse the cleared document no. 100006, a new document number is generated, say for example, document no. 100007 which is a reverse entry of document number 100006. Most importantly, document nos 100006 and 100007 gets cleared against each other. Both, document number 100006 & 100007 are cleared documents. There is a financial impact out here and the original document no. 100005 becomes an open line item document.
    It will be a little confusing if you read it once, but put this example on a paper & then analyse, am sure your doubts will be cleared.
    Hope this helps.
    Regards,
    Amit Maniar.

  • Reversing the cleared document

    Hi experts,
    My client posted a wrong transaction in PRD system considering the Cheque Deposit Account instead of Cheque Payment Account while making a payment. After this the transaction became cleared item, now when he is trying to reverse the document system throwing up an error saying "Document is cleared, not possible to reverse".  Please could you suggest the way to reverse the cleared document.
    Nanda

    HI
    For reversal of cleared document we have to follow the below step
    1.Reset the cleared fi doucument in Transaction Code FBRA  
        Enter the Cleared document No ,Company code & Fiscal year then hit the clearing icon on the top press  the reset the cleared document then the document will be reset
    2. Check the status of the document in FBL1N  it should be uncleared
    3.Reverse the document in Transaction Code FB08
      Enter the UnCleared document No ,Company code & Fiscal year then reversal reason ,posting date & Posting period then hit the document icon on the top press  Post then the document  will be reversed
    Hope this will be usefull

  • How to reverse and reset documents cleared by FB1S

    Hi all,
    This is the scenario am into:
    Payment program cleared an open item doc say 19xxx for the vendor and created a clearing document 20xxx and check ABCD was send to vendor. Later found check was to be voided and the document reversed. Instead of doing FCH8, the user did an FB50 entry for the G/L account and executed the FB1S for manually clearing the G/L account with a document 30xxx. Now trying to void the check, gets an error saying "Document 20xxx is not purely a clearing document." The diagnosis explains that 'Payment doc 20xxx also has clearing document 30xxx in addition to its own clearing document number. As a result, the document cannot be reversed after resetting the cleared item.' The procedure explains again that to reset doc 20xxx, the cleared item 30xxx has to be reset prior.' I tried executing FB08 for the doc 30xxx, but errored out saying " specific document not reversible".
    I know its not an often situation. Has anyone comeacross something of this sort and voided the check?.
    Thanks alot in advance for all the help, suggestions and comments.. Points will be awarded for the helpful.

    Hi,
    using t.code FBRA reset&reverse the document no:30xxxxxxx.
    using fch8 youcancel check.
    regards
    Chandra

  • What is it that resets the Music Location when iTunes starts?

    So whenever you have your Music Location set to a mount on a remote device. Such as a share on a Time Capsule for instance if the mount isn't present when iTunes starts iTunes will always reset the Music Location back to it's default.
    Is there a way to stop this from happening?
    Can I make it so that mount is always available before iTunes or iTunes Helper starts?
    Both I and my wife on her Air want to share the same remote device for our music library but we don't want iTunes to keep reseting the Music Location.

    Option selects the iTunes library file, which is most likely in the /Music/iTunes folder on the Mac HD.
    The iTunes music folder is on the Time Capsule which needs to be mounted.
    As Robert noted, add the Time Capsule to your Login items.

  • Unlocking/resetting the security code!

    Today I tried to insert a sim into my old Nokia phone, it is an E52. it seems that I have left a setting on which requires security code if the sim is changed, but this phone is about 3 years old and I haven't used it for a long time so I cannot remember my security code.
    The information in the phone such as SMS and phonebook is very important for me, so I don't want any solutions that resets the phone and wipes everything. the phone is not locked if I don't insert a sim, so I rather keep like this and not use it if there is no safe way to reset/change/unlock the security code. but I really need another phone right now, and I don't want to spend money if I could unlock this.
    I have googled about this but I am not sure what is the safest way to unlock the phone while keeping my data. I found this website and it claims that it could unlock the phone but it doesn't look safe to me... what should I do? please help!
    Click on the Kudos Star, if you find my post helpful!

    farby wrote:
    it seems the device is locked to some Network. Are you inserting the same SIM that you had originally used in this phone ? 
    More information here upon "remote locking" upon E52, although not what OP wanted to hear: http://www.nokia.com/ie-en/support/product/e52/userguide/?action=onlineuserguidepagechange&pFile=GUI...
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for