I-Web---CANNOT see other homepages done in the past.

I am looking for about 3 other homepages my son and I have done and I cannot find them. Please help me!!!1

Make sure you have at least iTunes 10.3.1, then go to the iTunes Store, log into your account, and click the new Purchases link under the Quick Links. The new iTunes in the Cloud service may allow you to re-download your purchased content (music, videos and TV shows not available for re-downloading in all countries at this time; movies and audiobooks not available for re-downloading at all yet). You can also do this from an iOS device.
For more information, see:
http://support.apple.com/kb/ht2519
Regards.

Similar Messages

  • I cannot see my itunes library on the main menu under computers despite the network being active and the home sharing on on both the devices the mac and apple tv. Any ideas?

    I cannot see my itunes library on the main menu under computers despite the network being active and the home sharing on on both the devices the mac and apple tv. Any ideas?

    Hi Monty,
    Sorry to say it, but this is normal for Apple TVs. I've owned a TV2 and a TV3, and neither lasted for an entire year. They are quite fragile and of low quality, and as you can see here, quite fussy even when they work. The wi-fi receiver on these are cheap and unreliable.
    Consider the $99 an annual rental fee. They rarely work for a whole year, so if you are going to use the platform, you will have to replace them constantly.
    Also, when one dies under warranty, never, never send it to Apple for repair. Go to the Apple Store for replacement. I sent my ATV3 in for warranty repair using a box sent to me by Apple, and although FedEx tracking showed it was accepted by Apple, it was never seen again. Apple won't replace it or even return my calls.

  • Resource cannot see their assigned tasks on the Timesheet page

    One of the resource is not able to see tasks assigned to him in his timesheet after publishing the project. I have checked all possible reasons listed in the the document below.
    http://projeqz.freshdesk.com/support/articles/169136-team-members-cannot-see-their-assigned-tasks-on-the-timesheet-page-or-task-page-in

    Hi Project Help,
    In addition to the reasons mentionned in the article below (booking type and assignment owner), check the following:
    The publish field for the assignments must contains "YES",
    The project must be published successfully (with no errror messages in the queue),
    The resource must be an enterprise resource and not a local resource,
    You must look at the correct time period,
    You must ensure that there are no filters in the timesheet view,
    Then if it is a newly created task (after the timesheet was created), try inserting the assignment using the "insert row" button,
    If none of above work, for the assignments in question, change the assignment owner for any other resource, publish the project, change back the assignment owner to the right resource and publish again the project,
    Finally, remove the assignment and create it again (and publish).
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • HT5620 I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.

    I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.
    How can I change it when I cannot view it on my account. I am not even sure how this got setup.

    If you mean your rescue email address, it's in the Passwords and Security section, after you answer the two security questions.

  • Cannot see my purchased music in the left hand pane.

    I have moved my itunes library to a new computer but cannot see my purchased music in the left hand pane. Can I still download it.

    If you want to do file tranfers, you want to use File Sharing in iTunes is that correct? If that is correct, you have to have apps that support file sharing or they will not appear in the file sharing window.
    You have to scroll down a bit in order to see the file sharing window in iTunes.
    However, your post is a little bit confusing. I'm assuming that you are talking about iTunes. Some detailed information would certainly help.

  • Cannot see my iTunes Library in the Aperture 3.12 slideshow editor ('07 iMac 4GB Ram)

    Cannot see my iTunes Library in the Aperture 3.12 slideshow editor ('07 iMac 4GB Ram)
    How can it be missing? I have iTunes and it works fine but I cannot see my iTunes library when creating the slideshow

    Where are you looking?  First you are selecting the music menu:
    Then you select the pulldown:
    Finally what shows here:

  • My iPod Touch icons are large and I cannot see all of them, touching the screen does not make them return to normal. It is charged and was updated over the weekend.

    my iPod Touch icons are large and I cannot see all of them, touching the screen does not make them return to normal. It is charged and was updated over the weekend. What do I need to do to fix this?

    never found the answer by looking at a similar q on the right...thanks anyway!!

  • Firefox covers the whole screen so I can not see other programs opened at the bottom of screen

    firefox covers the whole screen so I can not see other programs opened at the bottom of screen

    It is possible that the screen is too high and that the status bar and scroll bar fall off at the bottom.
    Open the system menu via Alt+Space and see if you can resize that window.<br />
    If that works then close Firefox to save that setting.
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Can't see other Macs/PCs on the network...

    Since installing the Safari 6/Apple Remote Desktop Update I can't see other Macs/PCs on the network. If I restart I can see 2 Macs, but after a while they disappear, and I can see/connect to nothing...

    If you are using DHCP check that it is getting the correct addressing. In the event that it is but still not working then test by giving it a fixed IP and see if it then works.

  • I recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank"

    i recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank" and when i try to open it, i can't? I NEED HELP !

    Here is the download page

  • I'm trying to purchase printable ITunes cards -- which I've done in the past...no problem. Now a message reads: this Apple ID does not support this purchase....or something to that effect. What do I do?

    I'm trying to purchase printable ITunes cards -- which I've done in the past...no problem. Now a message reads: this Apple ID does not support this purchase....or something to that effect. What do I do?

    First of all, I think you are confused by something.
    You don't print cards. You print Certificates. So which item are we dealing with here first of all?
    Also, you can't buy gifts with just Store Credit, so do you have a linked CC?

  • Surcharge issue not disount - done in the past any body please?

    Hi friends
    Ha any body done in the past same kind of surcharge?
    Minimum order quantity(<b>not value</b>) check in the order for THREE kinds of materials.
    EX: I have to check 3 kinds of materials and if not 15(quantity) apply surcharge $100.
    Please help me on this issue.
    Thanks
    Prasad

    hi ,
    you can use the condition type KP01
    reGARDS,
    Murali

  • Youtube loads but then when i click on a video it doesent play. it worked fine the other day and in the past and suddently it doesnt work. please help!!!!!!

    youtube loads but then when i click on a video it doesent play. it worked fine the other day and in the past and suddently it doesnt work. please help!!!!!!

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Can see myself, cannot see others and they can't see me, but text chat work

    I have not seen a generic FAQ on this. Twice i have connected with friends in the US.
    We all have Macs. We can chat with no problem.
    I can see myself. I cannot see them. They cannot see me.
    Would there be a reason for this or solution?
    I have settings on maximum bandwidth.
    if MAC Chat does not work with video, would some other free service work?
    thanks

    iChat to iChat works in Video, Audio only and in iChat 4 Screen Sharing as well.
    Ideally System Preferences > Quicktime > Streaming tab needs to be set at 1.5Mbps
    This is because in Tiger and iChat 3 the Automatic setting is returned to iChat 3 as a 0 (In Leopard and iChat 4 it is set to limit you to 384k).
    Restart iChat if you have to Change it
    Depending on certain suppliers iChat's Own Bandwidth Limit in ichat > Preferences > Video Section > Bandwidth Limit drop down can be better if limited to 500kbps
    This can be changed on the fly during a chat and does not need a restart of the application.
    In an iChat to iChat Video chat these are the most likely causes.
    iChat to AIM on a PC is a different kettle of fish.
    AIM Says this about AIM 6.5
    http://www.aim.com/helpfaq/starting_out/getstarted.adp#608
    On the 10th June they issued AIM 6.8 but have yet to add any support pages.
    Some people say they can get it to work though.
    The PC end need s to do this...
    http://www.ralphjohns.co.uk/page12.html#_Service
    They may also need to find the Preferences for AIM on their computer and set the camera in the Enhanced IM tab.
    MeBeam is a web based application that uses Flash to control your Camera and Mic (it puts up a pop up for you to Agree to the control and it only lasts as long as you are connected - you may have to change the camera type setting).
    There are other options as far as applications go
    http://www.ralphjohns.co.uk/page5.html#_other
    And EZ Jim's List http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
    10:13 PM Friday; July 11, 2008

  • G5 Cannot see other devices in network, despite being hardwired to the AE

    I just don't get this.
    - My G5 is plugged in via Ethernet to an Airport Extreme.
    - I have and Airport Express configured as a repeater and for AirTunes in the living room.
    - I have an iPhone and a MacBook.
    The following conditions are true and as they should be:
    - The G5 receives the internet via the Airport Extreme
    - The Macbook receives the internet via the network
    - The MacBook can see the File Sharing that the G5 puts out
    - The MacBook can see the Airport Extreme and Express with Airport Utility
    - The MacBook can use iTunes to connect to the Express for AirTunes
    - The iPhone receives the internet over Wi-Fi via this network
    - The iPhone can use Remote to control the MacBook's iTunes
    The following conditions are true and, given above, make no sense to me at all:
    - The G5 cannot see either the Airport Extreme or the Express with Airport Utility
    - The G5 cannot use iTunes to connect to the Express for AirTunes
    - The G5 cannot see the iPhone/Remote in its list of devices in iTunes
    I just flat out don't understand how the G5 can get internet from the Airport Extreme and connect to the MacBook over Wi-Fi via the Airport Extreme, but cannot do anything else that the MacBook can do on this network.
    Can someone shed some light on this? I've checked firewall settings and they aren't any different between the G5 and the MacBook.
    Please.... I'm just totally confused.
    P.S. I've left off the complexity of the Laserwriter, but, I often configure this by adding a small hub between the Airport Extreme and the G5, adding in the Laserwriter via Ethernet to the Hub. The G5 can print to it, the MacBook can print to it, but none of the above changes if I remove the Hub from the network.

    I've done some additional troubleshooting and things seem to be related to the G5...
    - I tried different users on the G5, same results: G5 cannot see AirTunes or the iPhone, and the Airport Utility doesn't show either Airport Express or Extreme
    - I tried putting the MacBook on the Ethernet network, disabling the Airport on it, same results: MacBook can see the Airport Express and Extreme with the Utility, and can see Airtunes and the iPhone
    I also tried enabling File Sharing on the MacBook. It takes 7 seconds for the G5 to open a connection the MacBook via AFP file sharing, and it takes two minutes for the MacBook to open a connection to the G5 via AFP file sharing.
    I think my next step will be reinstalling the OS on the G5, but I wish I understood why two machines with the same OS on the same network, on the same position on the network, have such a difference in what they can see and what they cannot see.
    Does anyone have any insights to share?

Maybe you are looking for

  • I lose network connection after MacBook Wakes from Sleep

    I upgraded to Mountain Lion on my 27" iMac and 15" MacBook Pro. iMac is doing fine. MacBook Pro, however, when it wakes from sleep, seems to have the network untility crash. So the computer wakes from sleep, and the little status bar radar thing does

  • Printer only prints half the words, HP6200

    Printer only prints half the text.  In other words,  the text is shown only half the size.

  • Why do I have to set call forwarding 3 times every time?

    I have an iPhone 5s running 7.1.1.  Every time I have to set my call forwarding I have to enter the number that I want to forward to (doesn't the phone store this?) and I have to set it 3 times.  I go to Settings-->Phone-->Call Forwarding then select

  • PLEAS help opening a frame when clicking a button

    i have a applet and when i click on a button it opens a frame. i have atried a couple of things but the frame does not open. Can anybody Please help import java.applet.*; import java.awt.*; import java.awt.event.*; public class mainscreen1 extends Ap

  • Frequent BEA-001131 errors caused by JZ0S1 in Weblogic 9/10 + jConnect6

    The pasted error messages are shown frequently in Weblogic console log. The same errors happen in either Weblogic 9/10.0/10.3. cashdatasource is a JDBC data source to Sybase ASE server using jConnect 6.5. I have checked the description for these two