IBASE Create and Status Change

Hi,
I need to create an IBASE using the customer number and then set its status to a particular value.
Can anyone suggest the function module which will dot he job?

Hi
Try to use the FM's
IB_IBASE_CREATE
IB_IBASE_CREATE_INITIAL
JIT06_IBASE_COM_CREATE_IBASE
Thanks!

Similar Messages

Employee profile and status change?

Hi All,
Is ther any function module for Employee profile and status change in HR?
Thanks
Sundar

hi,
use these fm.
HR_ECM_READ_INFOTYPE_1001,
HR_INFOTYPE_OPERATION.

JEST table and status change document OPL8

Hi Experts,
1. I created a prod order and released it and saved. went to AUFK and got the object number to pass in JEST table. System shows no values found.I was expecting a record for the same. do I need to do something to populate JEST table?
2. In OPL8 under implementation tab, there is something called status change documents. do I need to configure OCM to use these change documents? if the answer is no, then what is the difference between these change documents and OCM change documents?
thx in advance

swathi.rege wrote:
2. In OPL8 under implementation tab, there is something called status change documents. do I need to configure OCM to use these change documents? if the answer is no, then what is the difference between these change documents and OCM change
The settings in OPL8 will just determine if system should write the change logs of status to table tables CDHDR and CDPOS (for audit trail). Entries will appear here CO03 >> Header >> Status changes
I think you opened up different windows of different boxes (DEV, QAS etc) and probably created in production order in DEV and checking status in QAS.
Edited by: Jeevan Sagar on Feb 12, 2012 10:09 PM

Order Reporting by Create and/or change date

Hi all,
is it possible using business content to report orders based on the date that they were created -OR- changed/canceled (if they were). My understanding is that BC reports orders by original CREATE date only.
Any links or documents_?

any documents on best practices for this for order reporting and open order reporting...i want to make sure that the deltas reflect the "truth" as the business sees it here
Calday     Created on Date      Changed on Date      Planned Ship Date     Qty      Sales Rep     Doc Type     Change Flag
1/1/2007     1/1/2007     #     1/9/2007     10      Bob     O     #
1/4/2007     1/1/2007     #     1/9/2007     (10)     Bob     O     #
1/4/2007     1/1/2007     1/4/2007     1/9/2007     10      Joe     O     C
1/6/2007     1/1/2007     1/4/2007     1/9/2007     (10)     Joe     O     C
1/6/2007     1/1/2007     1/6/2007     1/9/2007     7      Joe     O     C
1/9/2007     1/1/2007     1/6/2007     1/9/2007     (7)     Joe     O     C
1/9/2007     1/1/2007     1/7/2007     1/11/2007     7      Joe     O     C

IDOC confirmation and status change ???

SAP friends,
I have a question about IDOCS. We are implementing. In AP after processing payments, our bank will send us a text file which will have idocs number. and status number ( accept and reject).
We have to update that status number for our idoc in the system and if the number that was rejected we have to send an email to everyone. How can we change the status of idoc using the file the bank sends us.
Thanks,
Kavita Reddy

Hi,
Please explain the process detaily. question is not clear.
IDOCs are the intermediate documents, which carry information from SAP to Legacy or vise versa.
IDOCs will be distingwished by message type. These will generate by Program. In program please check about the status.
Thanks
Kalyan

Status profile and status change in opportunity

Hi All,
I have a business requirement to convert an opportunity type from one to another without creating another document
when user changes the status from in process to approved. Along with converting from OP6 to OP2, I have to change the status to in process also.How can I achieve this in CRM 7.1 version?
Thanks
Andy

The status profile for OP2 and OP5 are different.
So just by passing OP2 in orderadm_h is giving an error status profile can't be assigned to OP2"
any suggestions to try some other way?

BADI CRM_MKTPL and Status Change button! (Hide the standard system status)

Hello,
In transaction CRM_MKTPL, i need to delete some status that appears when i click on button Change status.
I am trying to use the BADI: CRM_MKTPL using the method 'GET_DROPDOWNBOX_VALUE', but i didn't get what i
want because this method is only valid (i think) for Listboxes for a field and not for a button, that is my
requirement.
Also i am trying to use the method 'p_fill_dropdown_listbox', but i don't know how to use this, and where, in
whick part of the BADI CRM_MKTPL.
I want to hide the standard system status in the dropdown list.
Any ideas?
Thanks in advance
Best regards
Message was edited by:
yukimai maio

just check in your badi there is any option is there for menu area customization or not in the implementation you can find attribute,interface ,subscreen like tab there check any menu area tab is there or not.. if it is not there then try for any menu exit and lastly you can try for transaction variant tcode SHD0.
regards
shiba dutta

Differences in creating IDocs by creating and by changing dispatch not.

Hello experts,
we want to create an IDoc everytime we create a dispatch notification (VL01N) and everytime we change it (VL02N). Now we want to add certain QM data to this IDoc and we write this data to the memory and read it in the IDoc processing (like described [here|http://help.sap.com/saphelp_nw04/Helpdata/en/fc/eb3bde358411d1829f0000e829fbfe/frameset.htm]). The problem is, that everything works correctly during creation of the dispatch notification and the IDoc has the expected information. But when we change the dispatch notification to create a new IDoc, the IDoc doesn't contain the fields. Debugging the IDoc creation also only works for dispatch notification creation... not for changes.
Does SAP start the IDoc creation in another process, when a dispatch notification is changed and uses the same process, when it is created? Is it possible to change this behaviour? Is it possible to fill a variable so, that it can be picked from everywhere... also from another processes?
Best regards,
David

We changed our business processes, so that the error doesn't occur anymore.

Expiration of Reward points and status change from elite status how does this happen?

My rewards point have expired and my elite status has changed. How does this happen?

Good morning John30csx, and welcome to the Best Buy forum,
I can understand questioning why your account status may have been downgraded. To have retained Elite status, you would need to have spent $1500 on eligible BestBuy.com and Best Buy store purchases during the 2013 calendar year. If you did not spend at least $1500 by 12/31/2013, then your account status would have been downgraded sometime in February.
From what I can see after looking over your My Best Buy account, you had a $20 certificate that expired in September 2013. Prior to some program changes that went into effect last year, a certificate would have expired 90 days (180 days for Premier Silver/Elite Plus members) after it was originally issued. Once a certificate has officially expired, we are unable to issue a new one.
With that all being said, please feel free to send me a private message if you perhaps have any additional questions about the My Best Buy program or your account. A private message can be sent by clicking on the blue button located within my signature.
How to Keep Your Account Active
Thank you for reaching out to us!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

How to differentaite between material created on & material changed ??

Hi all,
How to differentiate between material created and material changed???
is there any flag or indicator present to differetiate between two....please guide me.
Thanks,
Ashu

Hi Ashu,
I just want to clarify one point from you.
i always prefer to hit MARA with below feilds, if you want track singe change of the material
ERSDA - Creation date
ERNAM - Name of Person who Created the Object
LAEDA - Date of Last Change
AENAM - Name of person who changed object.
some times material may change multiple times, in these cases we need to hit CDPOS and CDHDR
to track the material changes....
or you can create a custom table with the feild time & date of change...and when ever material getting changed
in the ME21n exit update one entry in custom table.
Many Thanks
Raghu

CRM ORDER CHANGE AND STATUS MANAGEMENT - workflow

Hi,
We have created a Changed method for bus2000120 which is configured to fire when the Order is saved via Status Management. We have added an entry to BSVW for the object, bus2000120.changed with no restrictions. We have also created a function module that checks to see if the user status is E0005 or E0007 or it deletes the object from the Event table. I see that this works correctly, however, a given SAVE of a transaction is firing 2 bus2000120.changed for the exact same user and system status. (I know that it is firing 2 bus2000120.changed because I ran swels and swel. The event was listed twice. Please remember that the Event table when read directly after the save only lists bus2000120.changed one time.)
There is only 1 entry in the event linkage(swetypv) for bus2000120.changed and it has a condition of the same user status, e0005 or e0007. No real problem here, however, since there were 2 firings it runs the workflow twice.
When you look at the extras-change documents you can see that the Header is changed twice, once for a system status and once for the user status. I am assuming that since there are 2 changes, this is what is doing both firings.
The funny thing is that if I fall into our custom code in debug where we are reading the status and event tables I only see bus2000120.changed.
Any ideas on how I might solve this problem? Do you believe I am correct in assuming that the 2 status changes to the header of the transaction is how both events are being fired? If not, any guidance you might give would be greatly appreciated.

see post stream, solved via sap note 1063138

CR correction document status changes back to created

Hi Experts!
Does anyone of you know why in ChaRM CR Correction document the status of the document (controlled with Actions) switches back to "created" from status "In development". This switch happened to me several times when handling a normal correction and I don't know why it does that.
Usually I have done Action related task to the correction prior the status is swithced.
I've tried to look for a solution in the forum and in help docs but I haven't come accross any. Please don't get me wrong, I do get the full maintenance cycle working for normal corrections. This status change is more of an annoyance than an error.
We are using SolMan 4.0 SP09
Thankful for all hints I can get!
BR
Auli

I found a previous discussion from this forum with Avinash's advice to use note 919477. This is exactly what I was looking for.
I'm recording it here just in case anyone ever needs to solve this in the future.
BR
Auli

Created and changed columns strategy in HtmlDb?

I have two date columns on all my tables created and changed. Created is not null. The columns are maintained by database triggers. I would like for these two columns to be displayed but not changed in a form.
I have tried different ways to do this:
1) Text Field (Disabled, does not save state)
Create works fine but updating gives an error because the created column can not be null.
2) Text Field (Disabled, saves state)
Create works fine but updating gives ORA-01821: date format not recognized. I use a format mask like this: DD.MM.YYYY HH24:MI:SS
3) Date Picker (use application format mask)
Works fine but it ignores my format mask and the user can now change the dates.
Has anybody done this with success? Also it would be nice with a solution that does not involve a lot of code sine I have to do this lots of places :-)

I got pretty much the same as you can se below. It's not a problem with the triggers. But I got it working now with the :new = :old and it don't want to waste more time on this. But thanks a lot for your help!
create or replace trigger tilbud_under_kategori_b_ins_r
before insert on tilbud_under_kategori
for each row
begin
if :new.id is null then
:new.id := util.getSeqNextVal;
end if;
if :new.oprettet_af is null then
:new.oprettet_af := util.getUserName;
end if;
if :new.oprettet_tidspunkt is null then
:new.oprettet_tidspunkt := sysdate;
end if;
end;
create or replace trigger tilbud_under_kategori_b_upd_r
before update on tilbud_under_kategori
for each row
begin
:new.oprettet_af := :old.oprettet_af;
:new.oprettet_tidspunkt := :old.oprettet_tidspunkt;
if :new.opdateret_af is null then
:new.opdateret_af := util.getUserName;
end if;
if :new.opdateret_tidspunkt is null then
:new.opdateret_tidspunkt := sysdate;
end if;
end;
/

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

To create the follow up transaction automatically on status change in sap crm?

To create the follow up transaction automatically on status change in sap crm? If yes, how to make the setting for this?

Hi vishal,
As per the requirement transaction type is activity(ACTI) & sales order(TA). when the take order objective is complete system automaticaly craete a new activity of tele sales call or metting with wholesaler.
this is requirement of client.
now i am already create all type of transaction types of activity & sales order & create follow up transaction also. i have doam already create action profile also but when i am assign this action profile to transaction & try to create an sales order no follow up transaction could be create automatically. i think the condition is not right so please help me out in this. what should be the start & schedulec condition for this scenerio

IBASE Create and Status Change

Similar Messages

Maybe you are looking for