ICA refuses to recognize wireless scanner

I have an Epson Workforce 615. It has worked for years wirelessly for printing and scanning. Now with Mavericks I cannot scan. The native Epson software does not work under Mavericks and Apple's ICA refuses to see the scanner unless it is installed as USB. How can I change the USB driver to use the scanners IP address?

Try deleting the Preferred Network entry in your wireless Network settings, and then reenter it.
Also, there could be a wireless interference issue.

Similar Messages

Adobe Acrobat NI Pro doesn't recognize my wireless scanner, a Canon MG5520, but it prints from the same MG5520. This is ridiculous!

Adobe Acrobat NI Pro doesn't recognize my wireless scanner, a Canon MG5520, but it prints from the same MG5520. This is ridiculous!

I just used the "Quick Menu" in Adobe Acrobat XI Pro after wasting hours several days when the SSID and Network key/password were already activated and the Adobe software claimed no scanner was available. . These Adobe user manuals are next to useless. Now I'm still dealing with this problem: "Save As was unable to find tables in the document No file was created." (i.e., from the pdf file I created using NI). Well it's obvious there are tables in the pdf, but so far I haven't been able to get a result to determine the intrinsic accuracy of Adobe's pdf to Excel capability.

ICA driver for Canon MX512 scanner?

I've exhausted Canon Support, trying to get a Canon PIXMA MX512 multifunction printer/scanner/fax machine to work on my father-in-law's dual 2.0 GHz processorr PowerMac C5. They do have a printer driver, downliaded from their website, that allows it to work as a printer but the only driver for the scanner function is the TWAIN driver which only works on Intel processors. They suggested that I try the scanner using Image Capture, but Image Capture doesn't recognize the scanner. Canon does not have an ICA driver, and no plans to create one. The frustration is that both the Box and the Specification sheet says that the Minimum System Requirements for the MX512 on Mac is "Mac OS 10,5,8, Intel Processor, PowerPC G5, PowerPC G4 (867 MHz or faster) 512MB." Unfortunately on their website ONLY there is an "additional disclamer" footnote 18 which reads "System requirements vary by application"... a "cop-out" which really means that all the functions may not work on your computer, which means if it doesn't work, you're stuck with it! Even the Canon support tech was frustrated after an hour working with me and consulting his co-workers and reference sources. So.... does anyone out there know of an ICA scanner driver, canon or 3rd party that might work for this Canon MX512? The frustration level is high.....

I'd see if the older version of VueScan works for the MX512, it mentions the MX510...
http://www.hamrick.com/vuescan/canon_mx510.html
Free to try it...
http://www.hamrick.com/#download
Hmmm, I have ViewScan 5.2.19 on my G5/10.5.8 & I don't see that version there!?

Problem recognizing wireless scanner

I have an iMac that runs SnowLeopard 10.6.8. I use the Brother MFC All-in-One as a wireless scanner and printer. This has worked successfully for some time. Suddenly, although I can still print wirelessly, the computer doesn't recognize the wireless scanner. I think I had this problem about a year ago, and managed to fix it, but I have no recollection of what I did.

Try deleting the printer/scanner in system preferences, and then re-adding it.
If still no joy, try the above, then delete the application, redownload the application and re-add the printer to the printer list.
Make sure the print queue has be deleted so there are no jobs hanging things up.

Won't recognize my scanner, printing works though

I recently switched my printer to my MacBook Air running latest software (10.8.3) as my PC died. When installing, it found the right driver automatically for my Brother DCP 8060 CUPS. I am able to print just fine. However have spent several hours trying to get it to recognize the scanner to no avail.
Troubleshooting I have tried was to remove the Brother's driver and reinstall with apples latest Brother printer drivers (i found it here http://support.apple.com/kb/DL894) and then re-connected my printer. Same result. I can print but can't scan. The Image Capture app shows no scanner. Preview's "Import from Scanner" is greyed (non-clickable).
I also followed the instructions from Brother's site for Mac 10.8 driver downloads for both printer and scanner (found here http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_index.html ?reg=us&c=us&lang=en&prod=dcp8060_all&dlid=&flang=English&os=115&type2=-1) as well as tried to update the printer firmware per this page (firmware update failed as "couldn't find device). The TWAIN Scanner driver installed but set up failed stating it couldn't find the scanner.
Note, this is not a wireless printer. I am connecting it via a serial to USB cable.
I am not sure what to do. If anyone has a suggestion..?

Well, I figured out the problem. The usb port on the printer was damaged (prongs were bent). After I fixed it, it connected!

Mac mini refuses to recognize existing TM backup set

I just got my mac mini fixed with a new logic board, and I have it connected to a 250GB external FW drive. Time machine was running on a partition on the external drive quite happily since I bought it in November, but since getting it back from the repair, it refuses to recognize that there is an existing backup set on the drive. The hard drive is identical after the repair, machine name is identical, etc.
The machine name is "Wintermute" and there is an existing directory in Backups.backupdb - when I try to run a backup run, it creates a directory "Wintermute 2" and bails out with insufficient disk space (it's trying to do a full backup)
If I right-click Time Machine in the dock and select "Browse Other Time Machine disks" I can select the existing backup and it seems to be OK. However, I can't seem to continue adding to that backup set!
Any suggestions?

Here are the contents of my backup volume if it helps at all:
bash-3.2$ ls -al
total 16
drwxrwxr-x 13 skye skye    510 Jan 18 09:32 .
drwxrwxrwt@ 5 root admin   170 Jan 18 10:50 ..
-r--------   1 skye skye     16 Nov 3 17:03 .0016cbac0d11
-r--------   1 root wheel    16 Jan 18 09:32 .0016cbac4103
-rw-rw-r--@ 1 skye skye   6148 Jan 18 09:48 .DS_Store
drwx------   3 skye skye    102 Nov 3 16:57 .Spotlight-V100
drwxrwxrwt@ 3 skye skye    102 Nov 29 20:34 .TemporaryItems
d-wx-wx-wt   3 skye skye    102 Jan 18 10:50 .Trashes
-rw-r--r--   1 skye skye      0 Nov 3 16:57 .com.apple.timemachine.supported
drwx------ 10 skye skye    340 Jan 18 10:50 .fseventsd
drwxr-xr-x+ 3 root skye    102 Jan 18 11:03 Backups.backupdb

Imovie on my ipad ...refuses to recognize AVCHD Video. Also when i remove video clips already used in a project, it is unable to recognize missing clips after I've put them back. How do I get around these 2 issues?

My iMovie refuses to recognize, import, or work with AVCHD Video. It also refuses the same video clips even after I have converted them to Mp4. Also, when I delete a video clip already used in a project, then later import the same clip back to my ipad, the software is unable to recognize and find the clip again! Help! How do I get around these issues?

Hi Craig,
I also got the second problem. The storyboard on iMovie trailer has all these missing videos. If I import them on my iPad it doesn't find them.
If you find a solution it would be much appreciated to share it here ... I'll do the same.
Thanks,
Rafael

Boot Camp Assistant refuses to recognize my Windows 7 Installation Disc nor my USB

I have an iMac 20inch, early 2008 model. Back when I was running Leopard I installed Windows 7 with Boot Camp from a Windows 7 Installation ISO my friend had and I burnt it to a DVD and installed it without any problems. Later, after I got tried of windows, mostly because Windows really blows unless you want to game (which is what I was using it for), and I had contracted a virus, so I deleted Windows along with my partition after backing up any data that I though I might be able to use later. Now I am fully upgraded to Lion 10.7.2 and I downloaded the Windows installation drivers and whatever else Boot Camp persuades you to download and now at the step where I choose how much of my hard drive I want to partition, after I click partition, Boot Camp refuses to recognize that my installation disc is there no matter what format I put it in. I have followed every instruction given to me and nothing has worked. I'm thinking about trying to just partition my hard drive in Disc Utilities and formatting the new partition and then copying the ISO to the partition and seeing if it'll boot up.
Anybody have any better ideas, or solutions?

Well I have tried downloaded a Windows 7 ISO, and tried mounting it on a USB flash drive and booting it from the USB, but that didn't work either (I heard that my version of OS X doesn't support that anymore because I already have an optical drive.)
BTW - what do you mean exactly by running disk utility on the DVD drive?

ITunes refuses to recognize my iPhone 4.

iTunes refuses to recognize my iPhone 4 I have performed all the troublshooting suggestions including uninstalling and reinstalling iTunes several time, as well as factory rebooting and restoring my phone and it still refuses to recognize it. Is there anything more I can do to fix this on my end? Or is this a problem on Apple's end? Both my phone and iTunes are up to date.

Hi karwilson,
Thanks for using Apple Support Communities. If iTunes doesn't recognize your iPhone, this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari

I've done most I could think of, iTunes refuses to recognize 4 GB Nano

I have the constant "Do Not Connect" screen on my new 4GB Nano.
My wife previously used this computer for her iPod Mini. Before installing the new Nano, I removed iTunes from the computer. Then installed off the Nano's CD. I updated both iTunes and the iPod.
My computer recognizes the Nano as a "Removable Disk." iTunes, however, refuses to recognize it. I have loaded music into iTunes and that will play, but the Nano never works.
So, I unistalled iTunes, then reinstalled off the downloaded version that I saved to my desktop. Still no go.
Then I tried all the steps on iPod shows up in Windows, but not in iTunes -- to no avail.
So, I uninstalled and then reinstalled, without any success. I have reset the Nano several times. I have unplugged the Nano as well.
Any suggestions would be greatly appreciated. I'm thinking about returning this on for another Nano, and then throwing in the towel.
By the way, I was able to intall another 4GB Nano on my wife's new computer with no problems. The other computer doesn't want to recognize my Nano either.
Any help would be greatly appreciated.

Wow... the exact same thing has happened to me. First i bought a 2GB iPod Nano from Costco... installed perfectly and I had no problems. The next day I spotted the 4GB Nano and exchanged my 2GB for the 4GB (my sister also puchased and exanged one at the same time as me). My sister hasn't run the iPod software update, and her's works fine. I, meanwhile, installed it onto my iPod... now iTunes doesn't recognize my 4GB nano, and windows only recognizes it at a removable disk. I'm trying to rename the drive letter, but everytime i attempt ANYTHING to do with the nano my computer will freeze. Anyways, I took that one back to Costco and got another one. Yet, being absolutely stupid, I once again installed the update (this was when i thought the iPod was just faulty). I'm stuck in the exact same situation. Again. I've gone through 3 ipods in two days. So, the moral of the story is DON'T INSTALL THE NEW SOFTWARE ON 4GB NANOS! :'( ... Thanks for the warning Apple! Even your website is faulty!
P.S. Buy your iPods at Costco! They are amazing to their customers! (At least my location)

HT5676 my macpro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help!! and what does internal error got to do with installing a printer?

my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

my macbook pro (10.6.8) refused to install wireless printer (canon pixma MG4260). Whenever i tried to install, it keeps saying 'internal error number 12'. Please help me!! and what does internal error got to do with installing a printer?

Acrobat x pro doesn't recognize epson scanner

Acrobat x pro doesn't recognize my epson perfection 1670 scanner. Other applications recognize this scanner. What can I do?
All software and drivers are updated.
Acrobat x pro ver10.1.4
Mac os x 10.8.1, mountian lion

Twain Sane can be downloaded HERE. Others have recommended it as well and it is a viable option if your scanner is no longer supported under Mountain Lion.
It is a bit of work to install and configure, but the developer says a preference pane is available and makes it a bit easier. Check out the site for instructions on how to install and configure it.

Acrobat Pro 10.1.6 no longer recognizes my scanner

I updated my Macbook to Snow Leopard OS X 10.6.3 this week (I know, I took my time with this), and ever since, Acrobat Pro 10.1.6 no longer recognizes my scanner, a Canon MG2120 multifunction printer. What can I do to make it work?

Try loading the latest driver available from Canon: http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_in kjet_printers/pixma_mg2120#DriversAndSoftware
There seems to be one dated 7/27/12. You may also want to completely reload the MP Navigator software.
-David

ITunes refuses to recognize current iPod software

Hi all,
I had upgraded to the latest version of iTunes (7.1), but after a few weeks, it stopped loading completely. Instead, it began freezing 3/4 way through updating the library. I assume that during the upgrade, the iPod firmware was also upgraded.
I wasn't able to work my way around it, so I uninstalled ver. 7 and re-installed ver 6. Since then, iTunes opens perfectly (a relief).
Problem: iTunes refuses to recognize my iPod now, saying:
"The iPod cannot be used because it requires iTunes version 7.0 or later."
Obviously, I was having trouble with 7.1 so that's not an option I'd like to explore. Suggestions would be appreciated.
BL

i have a 3rd generation ipod and my girlfriend has a 2G nano, both of which stopped being recognized by itunes immediately after i installed itunes 7.0.2 (shocking). After some research and playing around i did find a workaround. Plug your ipod in and wait for "Do Not Disconnect". Right click on My Computer and select manage. On the left hand side towards the bottom select Disk Management. Next you should see the name of your ipod in the middle section, right click on it and select Change Drive Letter and Path. Next Click the Add button and choose a drive letter not being used by your computer (Q usually is available) and press OK. Close the Computer Management window and open itunes, you should see you ipod and should be able to update it.
As far as I can tell, you have to do this each time you plug you ipod in, but it does work.
Good Luck!
Windows XP Pro

ITunes refuses to recognize iPod

Hi all,
I had upgraded to the latest version of iTunes (7.1), but after a few weeks, it stopped loading completely. Instead, it began freezing 3/4 way through updating the library.
I wasn't able to work my way around it, so I uninstalled ver. 7 and re-installed ver 6. Since then, iTunes opens perfectly (a relief).
Problem: iTunes refuses to recognize my iPod now, saying:
"The iPod cannot be used because it requires iTunes version 7.0 or later."
Obviously, I was having trouble with 7.1 so that's not an option I'd like to explore. Suggestions would be appreciated.
BL
30G Video iPod Windows XP

I am having the exact same problem, if it is of any comfort. I have an 80GB Classic and a 512MB Shuffle (gumstick variety) and just this evening, when I plug either of them into the USB port, my Mac (G5) recognizes the iPod for a brief moment but then, a message appears saying that (I paraphrase) "an iPod has been plugged in but it cannot be identified properly. Please disconnect and try again." I do try again, and again, but nothing changes. The iPod's icon appears briefly on the desktop, as it should, but quickly vanishes as the error message pops up.
I tried resetting my larger iPod, per Apple's instructions, but that has not helped. I have restarted the computer twice, and no luck. I have just updated iTunes to the latest version; nothing.
The larger of these iPods did connect just fine, it turns out, to an iMac in the other room.
I actually had this larger iPod connected to my computer just this morning, updating its contents with some new podcasts. Ever since, and even now, it plays music and looks fine; it just won't connect.

ICA refuses to recognize wireless scanner

Similar Messages

Maybe you are looking for