Icloud sent out reply messages for old invitations after initial sync

After starting iCloud  synchronisation from my MBP i started to receive out of office messages from people that once hat sent an invitation to me, that I had accepted.
It seems, that in the process of syncing my calendar to iCloud all past meeting invitations were confirmed again by iCloud!!! One person got over 100 mails from me or iCloud respectivly.
One person got over 100 of those mails. I am using my calendar in a business enviroment and am not pleased about this behaviour. The worst thing is, that I don't even know, who these messages were sent to, there ist no sent-folder or similar as far as I know.

This has now happened to me TWICE!  ACK!
The first time it happened was when I upgraded to Lion a few months back, and was more or less forced into setting up iCloud (I wasn't even sure I wanted it but thought I'd give it a test spin, but then couldn't turn it off again without it removing all my calendar entries from my local iCal).  As with everyone else, all the old meeting request acknowledgments mysteriously and for no good reason went out and I looked like a complete fool (and btw, for those that are suspecting Exchange, it isn't just an Outlook/Exchange problem because I'm NOT on Outlook/Exchange, but I interact with customers that are on Outlook/Exchange and who send out meeting requests).  I didn't know how to get it squared away and was afraid to touch anything for fear it would happen again until visiting a 'Genius' at the Apple Store who said that I can't synch with iTunes and iCloud, and I also have to be careful when synching between multiple devices (my wife and I share contacts and calendars from the same account on two separate iPhones).  So after a frustrating and embarrassing first experience, I thought I was squared away, but then...
This past weekend, it all happened again.  All the old meeting acknowledgments went out, again, to the same group of people that got them the first time!  So, not once but twice, all my business contacts got meeting accepted messages from me for meetings that were as much as three years old! 
Now after reading Mark J P's post, I'm not sure if it was something I did (I was attempting to synch contacts to my wife's iPhone via iTunes this weekend), or if it was just another glitchy weekend for iCloud and had nothing to do with me, but whatever the case, it boils down to two inexcusable bugs, in my opinion:
1).  Meeting Accepted messages should not be sent for ancient meetings, ESPECIALLY when said messages have already been sent.
2).  Users should be notified that a message is going to go out, and be allowed to decline it.
After these two totally unacceptable blunders, I wanted nothing more to do with iCloud, but when I went to turn it off, it again threatened to delete all calendar entries (though you can choose to keep your contacts when turning off iCloud, there was no way that I could see to prevent it from deleting calendar entries).  So I googled around until I found a thread that told me to:
1) export all my calendars now being held hostage by iCloud,
2) create new local empty calendars, and
3) import the exported calendar data into the new local calendars. 
Then, iCloud made good on its threat and deleted all my iCloud calendar data when I shut it off, and I am now able to synch my contacts and my new local calendars the way I used to -- with iTunes -- and I am finally free of iCloud's evil clutches!
I am honestly dumbfounded at how terrible this experience has been.  I can't believe I am anything other than a very typical user (that shares one iTunes account for multiple devices and accepts meetings from business colleagues that use Exchange), and that Apple would release something as abysmal as iCloud to wreak the havoc that it has.

Similar Messages

  • My facebook app no longer works for my iphone after i sync it to my laptop!

    Why does my facebook app no longer works for my iphone after i sync it to my mac book pro?
    I added this app for facebook and then i synced it up with my mac book pro, but afterwards it lost the app, and I can't download it anymore... why is that?
    And how do I manage to put it back on my iphone?

    Hello hersheygirle,
    Welcome to the Discussions Boards.
    Re-download the Facebook APP on your computer and then sync it to the iPhone.
    Make sure your computer is logged into the same iTunes ID that shows up on your iPhone when you try to download an APP on the iPhone.
    http://support.apple.com/kb/HT2519
    Hope that helps,
    Charles H.

  • Creative Cloud-Am I tied in for another year after initial year's membership if I accept the higher?

    Am I tied in for another year after initial year's membership if I accept the higher rate? or can I leave at any point in year 2?

    Hi Bev,
    Fully appreciate that the price will go up. Just slightly concerned that I am "tied in" for another year at the higher rate.
    This what I received through this morning:
    We hope you've been making the most of everything Creative Cloud has to offer. With the next generation of creative apps like Adobe Photoshop® CC, Illustrator® CC and more; great training resources; and more efficient ways to collaborate and share with the creative community, you have everything you need to create your greatest work. Only in Creative Cloud.
    To make sure you can continue to use your favorite tools and services without interruption and take full advantage of everything that's new, your membership will automatically renew on 01-September-2013 (PT) at the annual plan price of 38.11 GBP per month, plus applicable Tax/VAT. You don't have to do anything to renew.
    If you'd like to review your membership details or update your renewal settings, simply  <http://www.adobe.com/go/cc_manage_act?trackingid=KFKNB> log in to your account.
    Thanks for being part of Creative Cloud.
    The Adobe Creative Cloud Team

  • Fixed Out Put  Messages for RFQ,  and PO.

    Dear All,
    from where i can default the output messages for RFQ, and PO.
    Regards,
    qsm sap

    Hi,
    Goto NACE assigne Output Type & Access Sequence for Application EF & EA,
    Then  For RFQ Default Message goto MN01 & PO goto MN04 and maintain output types
    Rgds,
    Vikas

  • Outlook 2010 will not sync with iCloud after initial sync

    Hi guys, the basic summary is that after upgrading from a mobile me account to icloud (using a me.com account), I was able to sync everything from Outlook to the customer's iPhone but anything created after that would not sync. I tried creating a contact, calendar item, and other calendar items, none of which showed up either way (outlook to phone and vice versa).
    Here are all the details that may be needed to assist with this question (and thank you!)
    The account was upgraded from mobileme to iCloud, then outlook was upgraded from 2003 to 2010.
    OS is Windows 7 64 bit
    Outlook has 2 data files which hold all the contacts/calendars/tasks.
    I had to add the me.com email to outlook so that it would perform the initial sync.
    After the initial sync, all calendars, contacts, etc were moved to deleted items (which I think may be normal). I just moved them back to one of the pst files.
    At this point, creating an item in any calendar, or creating a contact does not result in that contact/calendar entry showing up on the iphone (or vice versa).
    Outlook does not show "icloud" calendar, only the calendars I previously created, but the iPhone says "All iCloud Calendars" and they list the calendars that we created in outlook.
    Customer says it synced fine when he used mobile me back in the day, and then it stopped so we had to upgrade to iCloud. Any ideas? =/ I spent over an hour trying to figure this one out, even had some brief apple tech help.
    Thank you SO much for your help. I'd LOVE to be able to get this fixed, otherwise I need to start looking into alternatives for syncing iphone with outlook 2010

    Hi guys, the basic summary is that after upgrading from a mobile me account to icloud (using a me.com account), I was able to sync everything from Outlook to the customer's iPhone but anything created after that would not sync. I tried creating a contact, calendar item, and other calendar items, none of which showed up either way (outlook to phone and vice versa).
    Here are all the details that may be needed to assist with this question (and thank you!)
    The account was upgraded from mobileme to iCloud, then outlook was upgraded from 2003 to 2010.
    OS is Windows 7 64 bit
    Outlook has 2 data files which hold all the contacts/calendars/tasks.
    I had to add the me.com email to outlook so that it would perform the initial sync.
    After the initial sync, all calendars, contacts, etc were moved to deleted items (which I think may be normal). I just moved them back to one of the pst files.
    At this point, creating an item in any calendar, or creating a contact does not result in that contact/calendar entry showing up on the iphone (or vice versa).
    Outlook does not show "icloud" calendar, only the calendars I previously created, but the iPhone says "All iCloud Calendars" and they list the calendars that we created in outlook.
    Customer says it synced fine when he used mobile me back in the day, and then it stopped so we had to upgrade to iCloud. Any ideas? =/ I spent over an hour trying to figure this one out, even had some brief apple tech help.
    Thank you SO much for your help. I'd LOVE to be able to get this fixed, otherwise I need to start looking into alternatives for syncing iphone with outlook 2010

  • HT204291 I had airplay with my ipad 2 and the apple tv before for a while. For some reason after a sync, i can no longer find the airplay icon on my ipad. Any idea why?

    I had been using airplay on my ipad2 mirror to my apple tv. Worked fine for a while.
    I sync and backed up my ipad yesterday and i could no longer see the airplay icon.
    Anybody know why and the solution please?

    Is your Apple TV "awake"?  Sometimes the AirPlay icon won't show for me if the Apple TV is sleeping - pressing a key on the Apple remote ususally resolves it.

  • Ical is sending decline messages for accepted invites

    When I get a calendar invite and accept it, all seems well, until I get an email back from the person inviting me asking why I accepted and then proceeded to decline the invite.  I don't know what is happening.  Can anyone help?

    I've read this article regarding problems of Japanese users and decided to post it here instead of making n+1st separate topic:
    http://docs.info.apple.com/article.html?artnum=301986
    I have a similar problem, but with Russian characters. When I add attendees to my event in iCal and send them invitations, some of them (MS Windows/Outlook 2003 users) see garbage in the e-mail they recieve. The Sender field contains garbage where my name should be, and then goes the e-mail address of mine which looks normal.
    It happens because the message sent with Mac OS X Mail is being encoded in Unicode while MS Outlook expects cp1251 (Windows) encoding, so my name taken from 'My card' entry in Mac Address Book is shown wrong.
    How do I change default encoding to cp1251? I tried doing (according to the instructions in the articel for Japanese users):
    # defaults read com.apple.mail
    but it said there is no such domain, and listing of domains gives:
    # defaults domains
    blued, com.apple.Bluetooth, com.apple.HIToolbox, com.apple.driver.AppleHIDMouse, com.apple.symbolichotkeys
    OK, I just temporarily changed my name by retyping it in transliteration, so that there are no Russian characters.
    The message received by MS Outlook looks fine then, but the answers sent back to me aren't processed by iCal properly! It shows that a reply is received but doesn't updates the status - agreed, declined, tentative.
    What do I do with that? Are there any additional actions my colleagues can take? Any additional software? Anything?!

  • ICloud Restore stuck - keeps asking for old Apple ID

    Hello,
    I've just gotten a iPhone 4S that I want to restore from an iCloud backup (I've had a 3GS previously). Unfortunately I'm running into problems as the restore process just doesn't finish. Some settings are restored just fine (contacts, messages, browser history, ...) while others are causing problems. In particular the photos & apps are not being downloaded. Apps are recognized but just sit on my screen "waiting".
    I suspect that the cause for all this is that the last backup is from March 2012 (my 3GS died then) and in the meantime I've changed my Apple ID. During the restore it keeps asking for my old Apple ID, which is not longer active & I cannot log into.
    Now I'm stuck since the phone decides to set the iCloud account to the old one and this cannot be changed as it tells me that I cannot delete the iCloud account during a restore is in progress...
    Any help or suggestions are greatly appreciated! Unforunately I don't have an iTunes backup and I really don't want to lose my data (especially the photos).
    Cheers,
    Florian

    The solution to fix this mess was to temporarily change my AppleID name back to the one that was active when the iCloud backup was being made.

  • HOT TO SET THE OUT PUT MESSAGE FOR PURCHASE ORDER

    As i was saving the Purchase order in Me21n the error message that came up was " NO OUTPUT MESSAGE SET FOR THE PO " HOW  DO I SET THE OUTPUT MESSAGE AND SET THE PO PRINT SETTING KINDLY HELP.

    Hi
    First of all Execute  program RSNAST0F in SA38 .
    Following are some steps for PO message printing
    Maintain Output of Purchase Order
    1. Condition Table
    SPRO &#61664; Material Management-> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    Ex:
    EF---> ZNEU
    Select “ZNEU” and double click on “Mail title and texts” and go to
    EN- New Purchase Order Print Out,
    Select “ZNEU” again and double click on “Processing routines,
    Select “ZNEU” again and double click on “Partner Roles
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    ZNEU -> ZNB
    Now you create PO(ME21N) and maintain the text and save it. Go to ME22N and print the PO by giving output type ZNEU).
    Vishal...

  • How to view System.out.print() messages for adapters in OIM 9.0.3

    I have created an adaptor for OIM from a java jar file. When that adaptor executes after some updates on tables it produces some execptions/error.
    I can not see the details of these exceptions as I do not know where is the standard output located when adapter is executed via OIM.
    Where cen I see output from my code lines that contain: System.out.println()?
    thanks

    I am not sure if logging is enabled as OIM was installed previously by another person - how can I check if it is enabled and how to use log4j in this case?
    OIM Design Console window shows no messages comming from my System.out.print() statements.
    /br
    Djeno

  • The mail on my i mac sent out three messages i did not address and did not send the one i had addressed

    i wrote a message this morning, it did not arrive to the intended address, but arrived was delivered to three individuals who had not been addressed, one of whom was last written in 2010.  what happened?

    Look in your Sent folder to retrieve the message you actually sent and see to whom it was addressed.

  • Re: How to have an out going message for voicemail

    Hi there, I have a Surface 8.1 RT tablet and I am trying to set up VM. The instructions say to go to the Menu Bar, but I do not have one (or don't know where it is) in my version of Skype 3.1.0.1005. I have swiped in and up and looked through everything to no avail. Help!

    Hi, Steveadler76, and welcome to the Community,
    How right you are.  This is the best I could find as far as updated FAQ instructions:
    https://support.skype.com/en/faq/FA10848/how-do-i-use-voice-messaging-and-call-forwarding-on-skype-o...
    https://support.skype.com/en/faq/FA10473/setting-up-and-listening-to-voice-messaging-windows-desktop...
    https://support.skype.com/en/faq/FA10791/setting-up-voice-messaging-mac
    Thank you for raising this!
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Out put Message for PO's

    Dear Experts,
    Can some one guide me how to implement the Output messages in configuration  to send the PO output through email?
    We are running under 4.6B.  Is the Medium 5 External the appropriate for emails?
    What are the technical considerations to be able to send emails?
    Any help is appreciate it a lot.
    Thank you.
    Monica.

    Monica,
    You are right. Medium 5 (External ) is correct one for e-mailing PO, but you need help from Basis team in setting up emailing facility from SAP system.
    And from your side, check your SAP system has a default Communication Strategy (CS01) (Transaction code MN04: Medium 5 and click Communication  to see Communication Strategy field), which describes a sequence of communication methods. If you don't have one you need to maintain a Communication Strategy in Customizing.
    Confirm that a email address exist for Vendor in Vendor master Record.
    Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
    Select node as PDF to display email in Outlook Express
    Transaction for Output: SCOT (to trigger the output manually)

  • Has Firefox recently sent out a message to download something immediately?

    A short while ago I unexpectedly received a message from Firefox
    telling me (I do not remember the exact words) to "download this immediately" or words to that effect. I started to but then thought better of it. Was this legitimate from Mozilla/Firefox or was it some kind of malware?
    I also have another question: No matter what I do, such as "clear
    recent history" I am unable to delete a list of recent sites I have viewed that appears in the"Address" box that appears on my Task Bar. How can I clear it?
    Thank you.

    Mozilla will never ask you to disable your security program(s).
    This is most likely a scam.
    If this was a message on a website, please provide the link.
    If this was an on-screen Firefox popup, please scan your computer for infection.<br>
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Changed iCloud phone number; not updated for keychain response after 3 days.

    Hi,
    I was correcting a keychain error that can occur (it seems) that asks for about 10-15 local keychain password checks upon booting.
    That issue is logged in the forum and easy to correct.
    What subsequently was required was resetting my keychains on my devices that required the security code challenge.
    Since neither of my pad or macbook are authorised to counter-authorise, I need to go via my registered phone number.
    All pretty basic stuff.
    So, when I realise that the security code message is being sent to my OLD cell-number I change it on my iCloud and expect it to change in my account and the entire system within 15-30 minutes, which would be quite normal and go from there.
    I was wrong.
    Since changing my phone number, which is still maintained on my iCloud account, I still get the system request stating the message is being sent to my old number.
    Yes, I have logged out of all my iCloud activities and rebooted and logged-in again to see if that has anything to do with it. To avail.
    Now it has been 3 days and the old number still appears in the security code request process on all devices on all panes that can be used..
    Any ideas???

    you are loading master data before transaction data correct? for any delta to work you need 2 hour safety time window.. that means if yoru work hour is finsihed at 5:00 pm load delta at 7:00 pm, you can check out help for safety time.
    you can check this to give you some more info on wbs.. or check out help.sap
    http://www.hyperthot.com/pm_wbs.htm

Maybe you are looking for

  • I'm at the end of my rope with this thing!!

    Just a quick overview, I've had my 30G iPod for about 2 weeks now. At first I couldn't get iTunes to read the iPod and had all these other problems. Eventually, after trying all sorts of things, I would have to pull the cord out of the USB port becau

  • I was working with my iPad with 1% battery and it turned off....

    I was working with my iPad with 1% battery and it turned off . I connected it to USB cable but my iPad wants to turns  on with 1% battery but after a minute it turns off again.it happend for more than10 times.Please help me .My iPad is the 3rd Genera

  • A question about Lyrics of Audiobook

    The Lyrics of a MP3 song works fine. But the Lyrics of audiobook has never worked well since I got my Nano3 8G. In the iTunes, I right-click on a *.m4b file (It is a audiobook format file), Then click GetInfo-->Lyrics, fill some words, press OK to sa

  • Versioning Tab empty in SQL developer data modeler

    Hi I was wondering if anyone could help. I have installed Oracle SQL Develeoper Data Modeler 3.0.0.665. I am unable to save any projects. When I try I get no error and the saved project does not apper where I have selected to save. If I go to the ver

  • JGRASP issues when compiling Java programs

    I installed both the JRE and the SDK newest versions and it still gives me issues. ----jGRASP exec: javac -g C:\UNCC\ITCS 2215\Program Assignment 2\WordFind.java ----jGRASP wedge2 error: command "javac" not found. ---- This command must be in the cur