IDE error?

if you run my code, in the Netbeans IDE, it won't compile and warns an error..but if you run the same code in BlueJ IDE, it runs smoothly..go try it
import java.util.*;
public class chap3_1
    public static void main(String[] args)
     int breakfast;
     breakfast = 1 + (int)(6*Math.random());
     switch(breakfast)
         case 1:
             System.out.println("today's breakfast is scrambled egg");
             break;
         case 2:
             System.out.println("today's breakfast is waffles");
             break;
         case 3:
             System.out.println("today's breakfast is fruit");
             break;
         case 4:
             System.out.println("today's breakfast is cereal");
             break;
         case 5:
             System.out.println("today's breakfast is toast");
             break;
         case 6:
             System.out.println("today's breakfast is yogurt");
             break;
}

I'm going to say "careful there partner" to your statement claiming that Netbeans may have a bug. Please see this excellent web site titled "How to Ask Questions the Smart Way" and is found here:
http://www.catb.org/~esr/faqs/smart-questions.html
Here's a subsection of that page titled:
Don't Claim that you've found a bug:
When you are having problems with a piece of software, don't claim you have found a bug unless you are very, very sure of your ground. Hint: unless you can provide a source-code patch that fixes the problem, or a regression test against a previous version that demonstrates incorrect behavior, you are probably not sure enough. This applies to webpages and documentation, too; if you have found a documentation ?bug?, you should supply replacement text and which pages it should go on.
Remember, there are many other users that are not experiencing your problem. Otherwise you would have learned about it while reading the documentation and searching the Web (you did do that before complaining, didn't you?). This means that very probably it is you who are doing something wrong, not the software.
The people who wrote the software work very hard to make it work as well as possible. If you claim you have found a bug, you'll be impugning their competence, which may offend some of them even if you are correct. It's especially undiplomatic to yell ?bug? in the Subject line.
When asking your question, it is best to write as though you assume you are doing something wrong, even if you are privately pretty sure you have found an actual bug. If there really is a bug, you will hear about it in the answer. Play it so the maintainers will want to apologize to you if the bug is real, rather than so that you will owe them an apology if you have messed up.
I don't know why you are having problems, but the odds are way in favor of your not understanding how to run your code in netbeans rather than netbeans having a bug. Since I don't use netbeans I can't tell you much more than this.

Similar Messages

  • Any Ideas ERROR U44M1P7 Update to Camera RAW 8.1(CS6) plug-in Fails to Update

    Any Ideas ERROR U44M1P7 Update to Camera RAW 8.1(CS6) plug-in Fails to Update

    Hi jper_pixated_com
    Please refer : http://forums.adobe.com/message/5391508

  • 785G-E53 Randomly disappearing SATA ports and IDE errors

    I'm having an issue with various SATA ports on this motherboard "disappearing" or becoming non-functional randomly.  Shortly after I built the system I noticed that one of my SATA optical drives was not showing up in Windows -- moving it to another SATA connector on the motherboard resolved the issue and I chalked it up to a flaky connector and moved on.  Recently my system started hanging for ~ 30 seconds or so every minute or two and the event viewer was filling up with errors about the IDE port my other optical drive was connected to not being available.  I replaced the IDE cable and things returned to normal.  A couple of days ago I noticed once again that the SATA optical drive (in its new connector) had disappeared.  I have not had time to move it to another connector yet, and yesterday while browsing the web my system suddenly hung.  Upon rebooting, my Samsung 1TB SATA drive could not be found during boot-up.  I tried rebooting several times with no luck.  I turned the PC off for the night.  When I came back to it the next day, it found the drive and booted with no problems.  After immediately backing up any recent data, I reviewed the drive's SMART info (pristine) and then moved on to the event viewer again.  Apparently the IDE errors started a few hours prior to the HD's SATA port going AWOL.
    There appears to be something flaky with the drive controllers on this motherboard, but I'm unsure how to confirm or troubleshoot this further.  Since the problem occurs at POST and boot-up, it is obviously not a driver or software issue.  I do not believe it to be PSU related -- the system has an OCZ 600W PSU and happily ran with a MSI GTX 560 Ti for months previously.  The 560 is currently out of the system and I'm using the onboard graphics, so the PSU is under even less of a load...
    I'm going to be installing a new SSD and finally getting around to installing Win7 on this machine so I would like to resolve any potential motherboard issue first.  I'd appreciate any help you guys can offer.
    Here are the system specs:
    AMD Phenom II x6 1055T
    MSI 785G-E53 motherboard
    16GB DDR3 1333 RAM
    OCZ Stealthstream 600W PSU with 4x 18A 12V (72A combined)
    Samsung Spinpoint 1TB SATA HD
    2x Sony/OptiArc optical drives (1 SATA, 1 IDE)

    To clarify, when I said POST and boot up, I meant everything prior to the bootloader taking over.  In the case of this particular system, multiple OSes are installed, so I have to select the Windows OS before it even starts to load itself.  The errors are present way before this step ever occurs.
    With respect to the drives, it is not always the same drive.  Up until the other day, it was always an optical drive that disappeared.  The missing drive was not detected by (and would not show up in) the BIOS even after rebooting and going into the BIOS to check.  The same occurred with the Samsung HD.
    (I do know not installing Windows from scratch is less than ideal but I needed the system back up ASAP and still had some software that was not Win7 friendly at the time.  Fortunately Acronis True Image handled most of the driver updates/replacements during the restore process and the few remaining I did from within Windows upon the first boot.  I highly recommend their product if you ever need bare-metal restore across dissimilar hardware!)
    Quote
    No way that is 72A combined.
    Look at the label and see how many watts the 12V rail can do, then divide 12-rail-watts / 12v = combined amps.
    Hmmm... I may have misunderstood the label.  Here's what it says:
    Voltage:     +5V     +12V1     +12V2     +12V3     +12V4     +3.3V     -12V     +5Vsb
    Max Curr:    30.0A   18.0A     18.0A     18.0A     18.0A     36.0A     0.5A     3.0A
    It does not list max watts for just the 12V rail.  Total output for all voltages not to exceed 580W.  When I bought it, the rep said add the 12V outputs together, but if that's not right I definitely need to know!
    EDIT: Well, curious about the max amps, I popped over to Newegg and pulled up the legacy product page for this PSU...<sigh> It does not have a very good track record for longevity and, apparently, the 12V rail distribution is practically useless: 2 rails power the 8-pin ATX/EPS connector, 1 rail powers the 2 4-pin PCI-E connectors, and the remaining rail goes everywhere else.  I'm thinking it's a miracle my GTX560 Ti ever ran in this system at all.

  • JDev11.1.1.4 IDE error:  not displaying view link in  service's Data Model

    Greetings,
    I was trying to update master-detail relationship in the Data Model tab of the Service definition tab.
    Got an 'unexpected error happened' and Jdeveloper shut down.
    After I re-opened it, I do not see my adf view links under the packages in the Available View Objects multiselect in the Data Model tab of the visual editor for service definition file.
    Also there was an uncaught exception thrown:
    'Performing action Clean All [ from oracle.ide.......CodeEditor]
    Performing action Optn ... [  from  from oracle.ide.......CodeEditor]
    Uncaught Exception
    IllligalArgumentException: component not found in tabbed pane......
    Also in the message log:
    Business Components: Load error.
    Any help is appreciated.
    Thanks,

    Click on the Proxy Service in your ALSB project to go to Proxy Service Configuration page. On this page, you will see an endpoint URI, something like /myservice. To get the wsdl in browser, use the URL like http://mymachine:7001/myservice?wsdl

  • ECC5.0 IDES ERROR

    HI
    I AM GETTING ERROR DUING IDES INSTALLATION
    INFO 2010-07-26 21:15:29
    Removing file C:\Program Files\sapinst_instdir\ECC50\SYSTEM\ABAP\ORA\NUC\DB\orig_ddl_ora_tmp.tpl.
    ERROR 2010-07-26 21:16:39
    FSL-02015  Node E:/DownLoad/DATA does not exist.
    ERROR 2010-07-26 21:16:39
    MSC-01003  ESyException: ESAPinstException: error text undefined
    WARNING 2010-07-26 21:16:39
    The step fillR3loadPackageTable with step key SAPSYSTEM_DB|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseLoad|ind|ind|ind|ind|ind|0|fillR3loadPackageTable was executed with status ERROR.

    when you ran SAPINST the first time, in which directory have you installed it? avoid spaces in directory names.
    also try to create directory E:/DownLoad/DATA and see what happens.

  • New adobe ideas error message.

    My program suddenly started giving me an error message every time I select a color. It says "theme creation date cannot be parsed". Please help.

    Thanks for reporting the issue. Can you let me know what iOS device and version your are running on as well as confirming the version of Adobe Ideas?
    We are investigating.
    Kim
    Adobe Ideas Team

  • Portege 2000,can't install windows,ide errors

    Any help much appreciated.....
    previous owner wiped the 20gb hard disk. Have the Toshiba pcmcia drive. Flashed latest bios. It will boot from xp or 2000 cd no problem,however both OSs stop at the start with bsod (2000 gives inacessible_boot device).
    Tried with ME but the cdrom driver isnt the right one(doesnt load the cdrom drive). In a situation like this I normally remove the drive and install(with hdd adaptor) in a pc to format and copy the OS files then replace the drive and run setup from the hdd but this has a 1.8" drive and I have no adaptor.
    HELP!!!
    Mick

    Hi Tyson,
    Sorry but I am a little confused about your explanation. If I understand you right, you bought used Protg 200 with external Toshiba CD-ROM device (PCMCIA) and you try to reinstall it?
    Do I understand you correctly?
    As far as I know in original Toshiba Recovery CD there is driver for external "TOSHIBA CD-ROM" (PCMCIA/CARDBUS) and it will be loaded at begin of recovery procedure. If it works with non Toshiba devices it is unknown to me. If you want to reinstall OS without original Toshiba CD you must start the notebook using start disc with right driver for external device.
    Like you said the best solution is to start setup from HDD. You must a Google a little bit around and I am sure that you can find one for you. Please check this site
    http://www.addonics.com/products/Saturn/aesed.asp . There is described that the optional 2.5" converter kit can be used for 2.5" or 1.8" IDE hard drive.

  • Satellite Pro A10: IDE#1 Error - drive appears only if CD is inserted

    Hi,
    I was recently laying on my bed watching a DVD when I fell asleep with the laptop sat next me on my bed. During the night however I moved and accidently knocked it off the side of my bed.
    The next day when I booted it up on loading it said IDE#1 Error which I have since come to understand is a CD/DVD drive error, The unit itself works fine, boots up ok (except the IDE error), and I can use it as normal except that there is no DVD drive in 'My computer' which is a bit of a pain when I want to watch a film/play a game or install something.
    The drive itself is totally unresponsive, when I press the eject button the tray it doesn't do a thing.
    I decided to try and remove and re-seat the drive to see if it was just knocked loose when it fell off the bed as it only fell a short way (about an 18" drop.)
    I removed all the covers on the bottom of the laptop and checked that everything was seated correctly and to try and figure out how to remove the drive but didn't want to get too adventurous as to make the situation worse, the only thing i did do is remove the CPU fan and remove some fluff and remove the HDD and had a look to make sure it wasn't damaged in anywhere (it wasn't) and then replaced it and replaced all the covers.
    When I rebooted the system it booted up fine as usual and the drive responds when I press the eject button, but the DVD drive is now (sometimes) displayed in 'My computer' but only when I insert something (be it a DVD/Game/Program) and then it displays an error message stating there is an I/O error on the device.
    Any help from you all would be a great help, I was thinking of just removing the drive and replacing it with a new one such as a DVD RW one but I don't know how so I would be very grateful for any advice/guidance you could provide.
    Many Thanks,
    Michael

    Hi Michael,
    It is possible that reseating your optical drive may be necessary to return it to full functionality. Unfortunately on the A10 this will involve some dismantling in order to reach its securing screw which is underneath the keyboard.
    Please check the following link for full dismantling instructions. The DVD drive is covered in step 13. http://www.irisvista.com/tech/laptops/ToshibaA15/SatelliteA15_laptop_disassembly_1.htm
    regards

  • Error 1402.could not open key:UNKNOWN\MPAPI.WAPCON...

    im getting this error message when i install pc suite v6.82 on windows XP. any ideas
    error 1402.could not open key:UNKNOWN\MPAPI.WAPCONNServerMP.4\CLSID. Verify that you have sufficient access to that key, or contact support personel....
    thanks in adv..

    It sounds that there is some permission problems in your register.
    Anyway, if you ignore that error message, does installation continue?

  • PSE 8 registration - Error 150:30

    I am trying to activate my copy of PSE 8 but before I can even enter my 6x4 code I get an "Error 150:30" message which asks me to restart my Mac, but which reappears after a reboot.
    I am running OS 10.9.4. Is PSE 8 incompatible with Mavericks?
    If so, what are my options?
    If not, how do I get around this error message?
    Thanks,
    Mark

    Sounds like a compatibility issue indeed. You can try and fix the permissions on the Library folders, so the activation data can be stored but beyond that you may not be able to avoid upgrading to v12. Either way, check these for some ideas:
    Error "Licensing has stopped working" | Mac OS
    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Workshop IDE can not create CTRL from WSDL file

    Hi everybody,
    For the evualtion of the Workshop IDE that comes with WLS 7.0 beta, I'm developing
    a web service (via this IDE) which must interoperate with another web service
    implemented with the help of another tool. I got the corresponding WSDL of this
    "outside" web service (see attachement), and when I want to generate the corresponding
    CTRL (via Add Service Control), I get the following error:
    Error: Could not find operation 'sayHello' in portType ''
    Prescription: The operation you are trying to bind was not found among the declared
    operations. Please check your <portType> sections.
    I do not have a lot of experience with WSDL files and its specification, but I
    compared this file with another WSDL files that work with WORKSHOP IDE, and I
    do not see difference between these files and the file that does not work. Moreover
    the IDE error says that my service 'sayHello' can not be find inside the 'portType'
    tags, but if you have a look at the WSDL file, you will see that is not true ?!?!?
    Can somebody help me please?
    Have a nice day
    Vincent

    Vincent,
    What is happening is that the type attribute on the binding tag must match
    both the targetnamespace and the name of the portType name attribute. Yours
    do match in basename only. When parsing the WSDL file what we do is put the
    name attributes of the portType, service and binding tags into the
    targetNamespace of the WSDL and then we expect the references to these names
    to also be resolved to that namespace.
    In the case of your WSDL, your targetNamespace is
    http://localhost:8000/HelloWorldApp/servlet/rpcrouter and the type attribute
    on the binding attribute just references HelloWorldServicePort which means
    it will use the default namespace of http://schemas.xmlsoap.org/wsdl which
    is, of course, different than the targetNamespace.
    To fixup the WSDL I would recommend you just define a new namespace at the
    top of the WSDL file that matches the targetNamespace attribute and then use
    that prefix in the text value of the attribute used to reference that name.
    Yes, we do need to do some better parser/error messages to help identify
    this :)
    Here is one way that I have done to fixup your WSDL and Workshop does pull
    it in and expose the methods correctly:
    <?xml version='1.0'?>
    <definitions name='HelloWorldService'
    xmlns:soap='http://schemas.xmlsoap.org/wsdl/soap/'
    xmlns:xsd='http://www.w3.org/2001/XMLSchema'
    xmlns='http://schemas.xmlsoap.org/wsdl/'
    xmlns:SOAP-ENC='http://schemas.xmlsoap.org/soap/encoding/'
    targetNamespace='http://localhost:8000/HelloWorldApp/servlet/rpcrouter'
    xmlns:test='http://localhost:8000/HelloWorldApp/servlet/rpcrouter'
    xmlns:xsd1='http://localhost:8000/HelloWorldApp/servlet/rpcrouter/schema'>
    <types>
    <xsd:schema
    targetNamespace='http://localhost:8000/HelloWorldApp/servlet/rpcrouter/schem
    a'>
    <xsd:simpleType name="java.lang.Integer"><xsd:restriction
    base="xsd:int"/></xsd:simpleType>
    <xsd:simpleType name="java.lang.Short"><xsd:restriction
    base="xsd:short"/></xsd:simpleType>
    <xsd:simpleType name="java.lang.Long"><xsd:restriction base="xsd:long"
    /></xsd:simpleType>
    <xsd:simpleType name="java.lang.Double"><xsd:restriction
    base="xsd:double"/></xsd:simpleType>
    <xsd:simpleType name="java.lang.Float"><xsd:restriction
    base="xsd:float"/></xsd:simpleType>
    <xsd:simpleType name="java.lang.Boolean"><xsd:restriction
    base="xsd:boolean"/></xsd:simpleType>
    <xsd:simpleType name="java.lang.Character"><xsd:restriction
    base="xsd:string"/></xsd:simpleType>
    <xsd:simpleType name="java.lang.String"><xsd:restriction
    base="xsd:string"/></xsd:simpleType>
    <xsd:simpleType name="java.lang.StringBuffer"><xsd:restriction
    base="xsd:string"/></xsd:simpleType>
    <xsd:simpleType name="java.lang.Byte"><xsd:restriction
    base="xsd:byte"/></xsd:simpleType>
    <xsd:simpleType name="char_lb_rb"><xsd:restriction
    base="xsd:string"/></xsd:simpleType>
    <xsd:simpleType name="char"><xsd:restriction
    base="xsd:string"/></xsd:simpleType>
    </xsd:schema>
    </types>
    <message name='sayHelloInput'>
    <part name='message' type='xsd:string'/>
    </message>
    <message name='sayHelloOutput'>
    <part name='result' type='xsd:string'/>
    </message>
    <portType name='HelloWorldServicePort'>
    <operation name='sayHello'>
    <input message='test:sayHelloInput'/>
    <output message='test:sayHelloOutput'/>
    </operation>
    </portType>
    <binding name='HelloWorldServiceBinding'
    type='test:HelloWorldServicePort'>
    <soap:binding style='rpc'
    transport='http://schemas.xmlsoap.org/soap/http'/>
    <operation name='sayHello'>
    <soap:operation
    soapAction='http://localhost:8000/HelloWorldApp/servlet/rpcrouter/sayHello'/
    >
    <input>
    <soap:body use='encoded' namespace='urn:HelloWorldService'
    encodingStyle='http://schemas.xmlsoap.org/soap/encoding/'/>
    </input>
    <output>
    <soap:body use='encoded' namespace='urn:HelloWorldService'
    encodingStyle='http://schemas.xmlsoap.org/soap/encoding/'/>
    </output>
    </operation>
    </binding>
    <service name='HelloWorldService'>
    <port name='HelloWorldServicePort'
    binding='test:HelloWorldServiceBinding'>
    <soap:address
    location='http://localhost:8000/HelloWorldApp/servlet/rpcrouter'/>
    </port>
    </service>
    </definitions>
    Thanks,
    Art
    "Vincent Ducret" <[email protected]> wrote in message
    news:[email protected]...
    >
    Thanks for your answer, but I do not understand it, and also yoursuggestion.
    >
    According to WSDL specification, the 'type' attribute of a 'binding' tagmust
    reference (bind to) an exisiting 'portType' tag. And it's the case here,no? I.e.
    we have a 'portType' tag called HelloWorldServicePort, which is referencedby
    the 'binding' tag named HelloWorldServiceBinding via its 'type' attribute:'HelloWorldServicePort'.
    >
    Where is the problem ?
    Thanks a lot
    Thanks for your help

  • I'm getting an error "Could not find compiled resource bundle 'layout' for locale 'en_US'."

    I thought I would update to the latest trunk version of the sdk.  When I run my code I keep getting this Error being thrown:
    "Error: Could not find compiled resource bundle 'layout' for locale 'en_US'."
    It worked fine with the beta sdk and nightly builds from a long time before that.  The error occured in builds 7573 and 7830, so what ever changed happened before then.  I put a break point in there, and other resource bundles are being loaded ok.
    My project uses RSLs and modules. I'm using Flash Builder beta.
    I'm not familiar with resource bundles and not sure what to look for.  Any ideas as to what to try or where to look?
    Is there something I need to update to run the latest code?
    Is the the appropriate place to post questions regarding the nightly builds?  Or should I be asking somewhere else?
    Thanks!
    PS Here is the full stack trace if it gives anyone more ideas:
    Error: Could not find compiled resource bundle 'layout' for locale 'en_US'.
        at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\trunk\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:339]
        at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\trunk\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:268]
        at mx.core::FlexModuleFactory/installCompiledResourceBundles()
        at mx.core::FlexModuleFactory/docFrameHandler()
        at flash.display::MovieClip/nextFrame()
        at mx.core::FlexModuleFactory/deferredNextFrame()
        at mx.core::FlexModuleFactory/update()
        at mx.core::FlexModuleFactory/moduleCompleteHandler()

    hi
    also add the following
    to my compiler auguments:
    -locale en_US    -source-path=locale/{locale}    -allow-source-path-overlap=true
    and to actionScriptProperties I have the following where path= is the location of your locale folder
    <compilerSourcePathEntry kind="1" linkType="1" path="/locale/{locale}"/>
    Not sure if this is the correct way to do it, but it stopped me getting any errors.

  • Migration errors from 10 g to 11g

    hi can any one please help me. i have done migration from 10g to 11 g and the migration has been failed and iam getting these warnings
    oracle.BC4J
    Warning: Classpath entry C:\oracle\Middleware\jdeveloper\jdev\extensions\oracle.jdeveloper.junit\junit4.5\junit-4.5.jar not found.
    oracle.jdeveloper.rcoeradapter
    Warning: Cant find resource for bundle oracle.jdeveloper.rcoeradapter.res.OERResourceBundle, key ALL_ONLINE_HELP
    oracle.sca.modeler
    Warning: Cant find resource for bundle oracle.tip.tools.ide.fabric.resource.SCAStringResourceBundle, key ALL_ONLINE_HELP
    oracle.xsqldt-ide
    Warning: Classpath entry C:\oracle\Middleware\jdeveloper\jdev\extensions\oracle.jdeveloper.junit\junit4.5\junit-4.5.jar not found

    I got same problem, but not for migration from 10g to 11g.
    Here I do:
    1. Install JDeveloper 11g Release 1 version 11.1.1.2 (JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536)
    2. Using windows > check for updates > install from local files I put Oracle SOA Composite editor 11.1.1.2.1.12.16 zip file (http://www.oracle.com/technology/products/jdev/101/update/fmw_products.xml), and perform update.
    After that, here I got:
    Warning: Classpath entry C:\WORK\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.jdeveloper.junit\junit4.5\junit-4.5.jar not found.
    Warning: Cant find resource for bundle oracle.jdeveloper.rcoeradapter.res.OERResourceBundle, key ALL_ONLINE_HELP
    Warning: Cant find resource for bundle oracle.tip.tools.ide.fabric.resource.SCAStringResourceBundle, key ALL_ONLINE_HELP
    Warning: Classpath entry C:\WORK\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.jdeveloper.junit\junit4.5\junit-4.5.jar not found.
    I try to install junit-4.5.jar manually and still got error:
    Warning: Cant find resource for bundle oracle.jdeveloper.rcoeradapter.res.OERResourceBundle, key ALL_ONLINE_HELP
    Warning: Cant find resource for bundle oracle.tip.tools.ide.fabric.resource.SCAStringResourceBundle, key ALL_ONLINE_HELP
    Any idea? What should I do?
    At this moment Jdeveloper are very annoying. How come me as a SOA developer can do "productivity with choice" if there still a choice for IDE ERROR? It frustrated me.

  • DVD-RW for Satellite 2800-500: IDE1 error, drive not recognized

    Installation of a DVDRW slim drive NEC ND6500 has caused an "IDE1 error" message on boot and the drive was not recognized.
    Would the Toshiba SD-R6472 DVDRW drive be compatible with my Satellite 2800-500?
    Does anyone know a way to make anyone of them work?
    [Edited by: admin on 22-Jul-05 17:57]

    If you took some effort in reading this:
    http://www.cdrinfo.com/Forum/tm.asp?m=84345&mpage=15??
    you would have known already.
    Well, you always have people who know better, and ofcourse there are always people who know better....
    (euh, never mind, hihi)
    Ok about the IDE error.
    Vasdiak has an ide error-notification.
    I didn't.
    In my case it was not recognized with the ND6500 connected and the 2nd controller dissapeared in bios and OS.
    Nevertheless was there the same solution for what appeared the same problem.
    This (and reading lot's of info on the web) got me thinking.
    In case of NEC equipment(and maybe other brands as well) basically you have to look for a real OEM drives, which are configured as Master/Slave
    Bulk & Retail drives are most of the time deliverd as CLS (even though retailers/dealers say otherwise), and that's no good for Satellite Pro 4600 (and many other toshiba laptops).
    Just to cut to the chase:
    The GNR-version of the NEC-ND6500A will work in a Toshiba Satellite Pro 4600 (2100 & 6100 too, and I think many more will).
    As for the Toshiba SD-R6472 DVDRW:
    My guess is it's the same problem with the same solution:
    1.Buy a Master/Slave configured drive OR
    2.modify it yourself by:
    2a.soldering pin45&47 together (like I did).
    2b.flashing the proper firmware (which is not always available/hard to get), which will result in reversed ATA.
    Problem is that the NEC, Toshiba and many others do NOT sell (real)OEM-parts to the end-users, even though many retailers believe they do.
    But that's merely because of the lack of consensus on how to interpret the meaning of "OEM".
    Fact is that many retailers sell bulk-parts as if there where OEM, but that's wrong !
    In my particular case:
    I bought a NEC-ND6500A which was OEM-specified on the website (dealer), and after informing with the dealer I bought the drive.
    The NEC did not work and I,amongst a lot of other things -->, contacted NEC.
    I mentioned the "OEM-story" and NEC explained.
    They won't deliver GNR-version to the end user, but he also told me the reverse ATA trick and send the proper firmware via email.
    Then again I decided not to use reverse-ATA-firmware because it cannot be undone, and there is less available firmware in reverse-ATA mode (no problem if you want to use official firmware only, by the way).
    To make things more confusing:
    GEN-version is specified as master, also by Nec, but the Toshiba does not cope with it well.
    And so do a lot of other laptops that cannot recognize CSEL-drives (which it really is !!).
    Kinds of errors one can get: IDE-error, unpredictable behaviour, no DMA possible, etc...
    The GNR-version (or GEN-version with soldering trick or reverse ATA-firmware) IS however recognized as master (or slave) drive on the 2nd controller....
    Enfin, if people here are really interested in solving their problem I think I really got them started here.
    My advise: put some effort into it (by reading link above and search the web).
    Good luck to y'all !
    Ger

  • TABLE_INVALID_INDEX

    Hi Experts,
    I am getting the error TABLE_INVALID_INDEX.Can any one help for this below error.
    Short text                                                                               
    Error in ABAP/4 statement when processing an internal table.                                 
    |What happened?                                                                               
    Error in the ABAP Application Program                                                        
    The current ABAP program "SAPLHRHAP_UI_WD_SUPPORT" had to be terminated because   
    |Source Code Extract                                                                               
    1010
    | 1011|        IF sy-subrc <> 0.                                                                  
    | 1012|          lv_target_found = c_false.                                                       
    | 1013|          lv_index = lv_index - 1.                                                         
    | 1014|          WHILE lv_index > 0 AND lv_target_found = c_false.                                
    | 1015|*           Read the previous element                                                      
    | 1016|            READ TABLE ps_document-t_body_elements                                         
    | 1017|              INTO lw_body_current_element                                                 
    | 1018|              INDEX lv_index.                                                              
    1019
    | 1020|*           Check if the element is to be displayed on a separate tab                      
    | 1021|            READ TABLE pt_tabstrip                                                         
    | 1022|              INTO lw_wd_tab_temp                                                          
    | 1023|              WITH KEY                                                                     
    | 1024|                row_iid = lw_body_current_element-row_iid.                                 
    | 1025|            lv_tab_index = sy-tabix.                                            
    | 1027|            IF sy-subrc = 0.                                                               
    | 1028|              lv_target_found = c_true.                                                   
    | 1029|            ELSE.                                                                          
    | 1030|              lv_index = lv_index - 1.                                                     
    | 1031|            ENDIF.                                                                         
    | 1032|          ENDWHILE.                                                                        
    | 1033|        ENDIF.                                                                             
    1034
    | 1035|*       Add the element to the found tab                                                   
    | 1036|        lw_wd_tab_content_temp = lw_body_element-row_iid.                                  
    | 1037|        APPEND lw_wd_tab_content_temp TO lw_wd_tab_temp-t_tab_content.                     
    | 1038|        MODIFY pt_tabstrip FROM lw_wd_tab_temp INDEX lv_tab_index.                         
    1039
    |>>>>>|        IF lw_wd_tab-tab_id = lw_wd_tab_temp-tab_id.                                       
    | 1041|*         Take over changes to currently processed tab config                              
    | 1042|          APPEND lw_wd_tab_content_temp TO lw_wd_tab-t_tab_content.                        
    | 1043|        ENDIF.                                                                             
    | 1044|      ENDIF.                                                                               
    | 1045|    ENDIF.                                                                               
    | 1046|  ENDLOOP.                                                                               
    | 1047|ENDFORM.                    " fill_document_tab

    Hi Durga,
    Are you enhancing the standard program?
    Go through below links, it wil get you some idea.
    error in  TABLE_INVALID_INDEX in prog HINCF161 for form16
    Runtime Errors- TABLE_INVALID_INDEX
    I think you should send this to OSS.
    Regards
    Srinivas

Maybe you are looking for

  • Can I separate out a matte in psd file and move the fill

    I have a logo which is text that's a photoshop file with a transparent background which of course AE treats as a matte. perfect. now I want to take the fill in the letters (it's a bunch of color blocks) and have them grow inside the text.  In an AVID

  • Changing ipod over from Windows to Mac

    I've been using my ipod with my PC for the last 2 years and I now want to change it over to my powerbook. I have all the music on an external drive and will only be selecting some of the music to go on the ipod as the collection is larger than the po

  • Item check on creation of quotation

    Hi I am using bapi BAPI_QUOTATION_CREATEFROMDATA2  to create quotation. I am uploading item data using EXCEL via Portal(EP).problem is that if EXCEL contain incorrect entries then it is giving error message only for 1 line(first) items. I think it is

  • Time Machine Stops Working on External HD

    1. Mac Intel 10.9.3, 2. 600GB on Mac, 400GB left on EXHD.  2. EXHD set to 1 partition, GUID partition scheme, format MS-DOS (FAT) as instructed in Mac Help (out-of-date info): Time Machine For External Hard Drives. 3. Checked disks to back up. Have s

  • Premiere wants to close during the burning of a DVD

    After having had much problems with Premiere 8 (slow and many freeze ups), I went to upgrade my computer and purchased Premiere 9, hoping I would have a smooth ride. WRONG!!! Speed has increased slightly but now I have the problem that the program ne