Ideal power supply protection for gigaworks s750 speaker system

anyone please help me decide on what to buy to protect my gigaworks s750 speakers from power surges or instability.
actually, i'm confused with what to buy, AVR or UPS and what capacity, 500, 000 or 500 watts/va.. Here in our place, the power supply is not consistent that for such reason I feel the need to secure my s750 speakers, especially that it's quite expensive.
Also, does anyone know how much power (if i'm right, it's expressed in watts) the s750 consumes, assuming it operates continuously in one hour? Thanks in advance.

eomons wrote:
anyone please help me decide on what to buy to protect my gigaworks s750 speakers from power surges or instability.
actually, i'm confused with what to buy, AVR or UPS and what capacity, 500, 000 or 500 watts/va.. Here in our place, the power supply is not consistent that for such reason I feel the need to secure my s750 speakers,?especially that it's quite expensi've. Also, does anyone know?how much power (if i'm right, it's expressed in watts) the s750 consumes, assuming it operates continuously in one hour? Thanks in advance.
Just get a power surge protector will do.

Similar Messages

HT1766 Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help pleas

Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help please.
Thank you Callum Gordon

Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck

Creative Gigaworks S750 speaker placement

Hey Guys,
As I get deeper into how to improve the sound on my Gigaworks S750 I'm starting to experiment with proper speaker placement.
So far, I have the four floor stands for the side and rear channels.
And going by the book I have the side channels slightly past and behind where my ears are, and they are pointed toward each other, and not directly at my ears.
The two rear speakers are both behind me, but pointed straight toward the front of my room, and not directly toward my ears.
Is this how they are supposed to be? Or should the sides be right at my ear level and right to either side of my ears? Same with the rears? Should they be angled in toward my ears at my seating position?
The diagram in my manual doesn't seem to indicate that the speakers get angled toward the listener except the front center above the monitor.
But other sites all seem to want the speakers angled at the listener, unless these Creatives are doing something different to create the surround sound field?
Here's an industry diagram vs. the Creative manual.
Creative diagram for Gigaworks S750, unfortunately I can't scale it up larger, but refer to page 6 by scrolling down in the manual located at the link below.
http://www.scribd.com/doc/14711901/C...ks-S750-Manual
So which is the most optimal for my speakers? I'm using option A for my setup in the Creative Manual right now, but just want to know what I should be doing to have the sound setup correct for these speakers.
Attached Images
Creative Gigaworks S750 speaker placement.jpg
(7.9 KB, 6 views)

Hi Faisal
Try looking in the forum
Successful Repair of s750 with blown Fuse
, there is a wealth of info in there all you have to do is look through the pages

Is it possible to change Power Supply unit for Lenovo H420 PC ?

I have 2 questions really as i recently bought this budget system.....I was amazed to see that the PSU was only 280 watts for this systemwhich kind of limits what Graphics card I can upgrade to.
My questions are :
1) is it possible to upgrade the Power Supply unit for the H420 from the default 280 W to say to a 400 W one?
2) If I cannot upgrade the PSU, what is the best performing Graphics Card that I can use in this system? It was pre-installed with a NVIDEA GeForce GT 520, which isn't the best around.
My 6 yr old Dell Dimension 8400 system with Win XP, which i have discarded allowed me to insert NVIDEA GeForce GT 240 card, which i think is a slightly superior card to the above one. Needed a 300 W PSU

Hi RBec and welcome to the community,
Is this your thread over there? If not, it gives a few options concerning the PSU.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Power Supply Unit for a PSC 1205?

Dear HP! Is it possible to buy a new or repaired power supply unit for my PSC 1205? Part no. Q1647-60019. Best regards Lars

It doesn't seem like this part is available in the HP Parts Store. I suggest you check one of THESE HP Part Partners in the US if they have this part.
PS: This forum is not an official way of contacting HP.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Power supply voltage for using PoE splitters

Dear Community
What is the power supply voltage for Apple TV 3?
Power consumption has been specified on the Apple product site, but not the power supply voltage.
Should be 5, 9 or 12 Volt.
Thanks!

http://docs-europe.electrocomponents.com/webdocs/0d88/0900766b80d88153.pdf
Every Expert was once a Beginner!!

A solution to the S750 speaker system problem

Well my s750 died just like everybody elses. But after creative wanted me to pay 75% of my purchase price, I found a better solution. Nope, I am not fixing the unit like you guy's. I do not see the need to fix a poorly design system! I am not sure if creative or indigo/bash/blade audio is to be blamed. But if I had to pick, I would say "indigo/bash/blade audio". Years ago before blade audio became indigo, I had a chance to visit their location in ontario Canada. This was just when they stop making the blade audio car amps.
While I was there, I happened to see this long list of brand names they had started to make amp modules for. Names like Harman International, Klipsch and so on. Anyway I cast the blame on indigo for this reason: Some years ago I had purchased a set of "harman international" infinity IL series speakers. Like our creative s750, the infinity shares a bash powered subwoofer system. And just like the s750 the infinity subwoofer like to blow up too! In the case of the infinity, the power supply was the weak link. The amp module in the infinity at that time, was built just like the blade audio car amps before. Which in my opinion is a much better design than what is being used in the s750. I remember one of the sale guy at circuit city at the time saying, "I wish we would drop this model". He went on to tell me the failure on the powered units were very high. You know there is a problem when the mid level Creative Inspire T7700 7.1, out last the flagship s750. Now, whats my better solution you guy's want to know? Two words , Simplifi Digital! The 7075a 7.1 amplifier along with Definitive Technology Pro Sub1000 and the remaing surround speakers from my s750 system. Yes, it did cost me more to go this route. But what I now have is a much more reliable system. And a sound that the s750 can only dream about. My s750 died while I was listening to Dave Bruebeck quartet "take five" at mid volume. With my current setup, I can listen mid volume all day long with no hiccups.
For those who my have the cash to spend. I recommend looking at my direction!? Keep this in mind, make sure whatever powered subwoofer you choose, is adjustable up to 50hz. The creative surround speakers dont play very well below 20hz. Also make sure whatever powered sub you choose don't use a BASH amplifier. For those looking at the s750 as a purchase, good luck. Or go over to partsexpress.com and get the Dayton Part Number 300-670, surround speakers. Then get the simplifi digital 7075 7.1 amplifier and power subwoofer of your choice and make a better/best system. Sorry Creative Labs! This post is NOT intended to cast negativity. I use and like the products you offer. I just do not like the s750, and the reasons are all over this forum and elsewhere on the net. I currently own 3 audigy 2zs sound cards, three Inspire t7700 speaker system, three sound blasters modems and yes, one defective/dead s750 speaker system. If anything use this post as a positive to what Creative Labs could offer in the future. A system like I now have, sure would be nice with the Creative name all over it.
Victor
Creative Labs end user

My system specs below. What I have now simply blows the S750 away. And this is mated to my Audigy 2zs card. I am tempted to try my Terratec Aueron 7.1 universe which does sound better than my 2zs. The Simlifi Digital amplifier is one serious unit. This amp has one HUGE toroidal transformer inside of it! I was able to see it thru the vents on top of the cover. Definitive Technology ProSub 1000 Subwoofer Specifications:Complement: One 10" woofer with polymer cone coupled to one 10" infrasonic radiator
Amplifier: 300 Watts RMS
Speaker Level High-Pass
Filter: 6 db/octave (80 Hz)
High-Level Low-Pass Filter: 24 db/octave continuously variable (40 Hz ~ 50 Hz) plus unfiltered LFE direct coupled input
Frequency Response: 8 Hz ~ 50 Hz
Simplifi Digital 7075, 7.1 Channel Surround Amplifier
Detailed Specfications
Power Output: 50 W/ch RMS, 8 ohm ( kHz sine wave, all channels). 70 W/ch RMS, 6 ohms ( kHz sine wave, all channels) 75 W/ch RMS, 4 ohm ( kHz sine wave, all channels) 75 W/ch Peak, 8 ohm (music) 100 W/ch Peak, 4 ohm (music)
Frequency Response: 20Hz-20kHz (+/-0.2db over the entire frequency range)
Total Harmonic Distortion: <.03%, 50W RMS, 4/8 ohms, 20Hz-20kHz
Line-level Audio Inputs: V RMS (2.83V P-p) yields full power out into 8 ohms
50k Impedance
8 RCA inputs
Subwoofer output: Pass through (non-buffered)
AC Power: 0-25 VAC at 5A
Dimensions: 7.2"(width) x 3.9"(height) x 7.7"(depth)
Weight: 33 lbs
PRODUCT DESCRIPTION
The perfect audio solution for your Media Center or traditional PC. Use the Simplifi Amplifier with a Media Center PC, and get clear, powerful audio in your living room without needing yet another remote. Connect the Simplifi Amplifier to a traditional PC and hear how good your computer's audio can be.
Features
Class A/B Hybrid Design provides power and audio fidelity
Simple Rear Panel Connections make setup easy
Power Sensing Technology turns amplifier on/off with PC
Volume controlled through PC
Media Center Power Plug
Advanced Spike Protection
Fan cooled

New power supply adapter for MD-100

Is there any place where I can get a new power supply adapter (or a new power supply) for my Nokia MD-100 speaker? I have a UK adapter now, which was inlcuded, but I want one for swedish sockets instead. I have an "external" adapter now, but I hoping I can get a proper adapter which fits the power supply.
Thanks.
Regards,
Joakim.

Hi Joakim,
Do you have the original UK charger for the Nokia PowerUp? If it's the one with the removable pins would you sell me the UK pins? And perhaps someone else has the Swedish clip, I've got a spare USA one.
Cheers

Is this Power supply suffiecent for my system?

Hi, Is this PSU powerful enough to run my computer? SILENT PUREPOWER SERIES TT-420AD, 420WATT POWER SUPPLY, +3.3V@30A;+5V@40A;[email protected];+12V@18A;[email protected];+5VSB@2A. My computers specs are as follows: AMD athlon 2700XP, 2xVdata 512mb pc3200, ATI Radeon 9700pro, Seagate SATA 80GB hardrive, Hitachi DVD ROM drive, floppy drive, MSI KT6 Delta FISR. I want to know whether this power supply will have enough power to run my setup as I brought an ICUTE 400watt power supply that couldn't manage(no doubt cause its a cheap peice of sh*t) but since Thermaltake is a decent brand I'm thinking it should manage but I just want to be sure. Cheers

Quote
Hi, Is this PSU powerful enough to run my computer? SILENT PUREPOWER SERIES TT-420AD, 420WATT POWER SUPPLY, +3.3V@30A;+5V@40A;[email protected];+12V@18A;[email protected];+5VSB@2A. My computers specs are as follows: AMD athlon 2700XP, 2xVdata 512mb pc3200, ATI Radeon 9700pro, Seagate SATA 80GB hardrive, Hitachi DVD ROM drive, floppy drive, MSI KT6 Delta FISR.
That PSU will support your configuration and then some. I have several TT Silent PurePower 420W in service - no complaints. Dual-fan PSU of good construction. Whenever Newegg puts that PSU on sale for $36.99 with free shipping (regular $42.00 plus shipping), I jump on it.
+3.3V and +5V are not a problem, you would be hard pressed to build a system that can place a combined load greater than 170W on +3.3V and +5V, even if you tried. Your system power needs on +12V rail will be (MAX LOAD):
MSI KT6 Delta FISR = .5A
Athlon 2700XP = 7.2A (AMD Datasheet)
2x V-DATA 512MB PC3200 - N/A
ATI Radeon 9700PRO = 1A (see: O/C Radeon 9800 Pro)
Seagate SATA 80GB = 2.8A
Hitachi DVD ROM = 1.5A
CPU FAN = .25A
2x CASE FAN = .5A
Max Total = 14A (rounded to the next ampere)
Edit: I should point out that 14A is the load expected if all these components are simultaneously placing their MAX load on the +12V, a condition that is virtually impossible to reproduce outside of a test lab. For instance, HDD and CD/DVD drives generate max load during disk spin-up, thereafter demanding much less current for read/write/seek operations (approx. 1A). Same with cooling fans.
A real world 'continuous' consumption figure would be in the neighborhood of 10A.

Need Help with power supply reccomendations for my graphics card

hi
i have a MSI GeForce GTX 780 Graphics card... i built my own system, i also got a rosewill rx750 power supply in it which i think is causing me problems, the computer works great until i get into games like titan fall and try and get into a game then it restarts the computer on its own.. has done this with a few games, but it works fine when surfing the net and so forth, i have read its to do with the power supply being week and also read my chosen power supply isnt that good... anyone got any recommendations for me that i should look at or am i looking in the wrong direction with whats wrong with my pc... any help would be great thanks

yes the PSU is the most important choice out there and corsair and seasonic are the best out there! (never buy cheap PSU's as like abvolt said a cheap one can easily kill your more expensive parts)
Cheap PSU = made of the most cheap parts they could get "think cheap shanghai parts are used that may be of any quality good or awful as its just what they could get for the lowest price" (ever bought anything that was super cheap they break very easily)
Quality PSU = the use of good quality well made parts and will have very good testing done on them to make sure they are stable and pass very tight regulations and conform to specs for 10-30 different factors each.
a cheap low quality PSU I class as a paper weight as it will never go near a computer (maybe i would use one as a basic bench PSU for things i do not care if they die or just for testing a fan or something that rubbish dirty power is not really a major problem but silicon is not tolerant to dirty power and will kill parts)

Power supply needed for MS-7220 (Diamond Plus) and others.

The following statement is taken form the K8B Diamond Plus Manual.
For ATX 12V power connection, it should be greater than 18A.
If I am interpreting correctly, the ATX 12V connector should have dedicated to it a minimum of 18A.
My first, question is if the Power Supply has two or more rails, how do you know the power dedicated to the ATX 12 connector on the Power Supply?
Second, if a +12V rail is not dedicated the connector, how do you know what is connected to each rail of the Power Supply?
This maybe the source of why many are saying, they have more stable system performance when using single rail Power Supplies.
I have tried eleven different manufactures to get more detailed Power Supply specifications, but no responses; today through February 1st is the Chinese New Year.
Those of you running the K8B Diamond Plus, what are you using for Power Supplies and are you having any instability problem?
One thing I did find curious was that going the manuals and in most all of the newer Socket 939 motherboards have this specification, but nothing in the motherboards specifications of on the MSI Web Site about this required and the are a lot of 500-600 Watt power supplies sold that do not meet this specification.
The statement Total Wattage does not mean a thing has even more meaning to me now.
Are we going to have to know the Current Rating of each cable on the output of a Power Supply now to insure we are purchasing the correct Power Supply?
Roger

Roger
Ihave a Tagan 580w U22 with switchable dual/combined +12v rails and it is very stable,set it combined for 35a.
Only thing to ponder was the 4/8 pin +12v/p4 connector,power supply has the correct split 2x4pin connectors so does the board but there is a little removable cover over 4 pins,so thinking MSI fitted it there for a reason I have fitted only one 4 pin connector,no problems as yet.
Think you may well have a point re the 18a.
I have just given my son my old sli platinum/cpu/heatsink/ram/vga card,this setup ran 250/11/4 @ 1.4v & ram 2.5 3 3 7 1.1 @ 2.75v with the Tagan.this setup now fitted in his case but with a dual 18a rail Enermax and he can't o/c stable to the old settings.Case has better cooling than the wavemaster it all came from.
Dont think the enermax is bad just that it supplies the power a different way.
Regards
Rossoevo

Power Supply Help for 466mhz G4 - where can i get a good deal.

I need to find a replacement for the power supply in the machine. It is an original 466mhz g4, agp graphics. The power supply says 126w max and had AC BEL on it.
Can anyone help me out in finding a cheap place to get a power supply that fits this machine perfectly? Looking for a reputable dealer (obviously).
Thanx in advance.

Hi Nelson,
You're machine is a Digital Audio (the only G4 to have shipped with 466MHz processors), and the PSU is 338W - which should be adequate for most things. Why do you need a new power supply?
If you need a new one, it won't be cheap. You can try this place:
http://www.dvwarehouse.com/G4-Power-Supply-c-238_476.html
Hope this helps,
-Travis

Power supply options for H530

I am currently running a Dell Dimension 2400 with 640 meg of ram and Windows XP. The computer has served me well for the last 6 years but I think it's time for an upgrade. We use our computer for basic email, web surfing and occasionally microsoft office documents. I received a email this morning that the Lenovo H530 is on sale for $399.00 (100 dollars off). It has 4 GB of ram, windows 7, 1TB hard drive, Intel dual core G3220 processor. It is expandable to 16 GB of ram. I am sure that this computer is sufficient for our needs. The only question that I have would be the power supply. The unit comes with a 180 watt power supply. I know in the past I attempted to install a video card in my old Dell and it wouldn't work because of the power supply. Evidently it did not produce enough power to run the system and the additional video card. Will I run into any issues if I wanted to install a power supply with more wattage in the Lenovo so I can install a video card down the road if I wanted? Thanks for your help

hi johnfillippi,
Welcome to the Forums.
AFAIK, you shouldn't have any problems or encounter any issue(s) replacing the stock PSU of the H530 as it uses the standard ATX form factor (the front panel connectors are also standard).
In addition, if you'll be using an aftermarket graphics card other than the one listed on page 49-50 of the hardware maintenance manual then you may want to check this article as you may need to alter some BIOS settings for the graphics card to work (this applies if the BIOS is UEFI enabled).
- Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

No power supply cable for second hard drive

Hard drive in PC is crashing mechanically. Want to ghost a second hard drive before first drive crashes completely. Bought duplicate of existing hard drive, but there is no power supply cable/connector for it. Have SATA plug, but cannot power up second hard drive. What do I do?
This question was solved.
View Solution.

LB1815, welcome to the forum.
If I understand your problem correctly, this is the connector that you need. It converts a single SATA power cable to two connectors. This allows you to connect two drives with on cable. There are many other brands available on Newegg. This is just one example.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Power supply unit for 1500+

hello,
i got another set is Athlon XP 1500+(palamino), the power supply is aopen brand, i think is 250 or 300 watt,
display card -winfast a170 (GF4 mx 420)
RAM -Kingmax 128MB PC2700(x2)
MOBO-KT3 Ultra2
HDD-40GB Maxtor DM+8(7200RPM)
CD-rom -56x Aopen CDrom
CD-RW-40/12/48 Aopen CDRW
1pcs internal modem
the power supply it is enough for use or no?????
thanks

because last time i used all the parts is same,except the the power supply,
the psu last i used is enlight 300watt (180watt combined),it spoil my hddusing some monthafter iuse gf4 mx420,so change to enlight 420watt,now this set i want give to my sister,so the aopen 25owatt psu, no sure can use for 1500+ or no???
if can't i want downgrade to 1000(100MHz)default setting,may be the power will be enough for use
thanks

Ideal power supply protection for gigaworks s750 speaker system

Similar Messages

Maybe you are looking for