Identifier length exceeds the maximum of 31 characters

I use the sun f90 compiler to compile a subroutine. However, the compiler told me the subroutine's name is too long. Deos anybody know how to solve this problem? I really need such long subroutine name. Many thanks!
% f90 -DCAM -DNO_SHR_VMATH -DHIDE_SHR_MSG -inline=%auto -fast -g -fsimple=1 -fns=no -O4 -DHIDE_MPI -g -c gfdl_column_diagnostics_mod.F90
gfdl_column_diagnostics_mod.F90", Line = 379, Column = 15: ERROR: Identifier length exceeds the maximum of 31 characters.

Thanks for your reply!
The version we use is:
Sun WorkShop 6 update 2 Fortran 95 6.2 2001/05/15
Must we update our compiler to enable longer
identifiers?Yes, I am afraid so. You can download the latest version at no charge
from Sun's website. I suggest waiting until Monday or Tuesday to
download it.
You might have a problem mixing old and new .mod files with such an
old version of the compiler. You should plan on recompiling all your
files that contain modules.
Bob Corbett

Similar Messages

  • SSL received a record that exceeded the maximum permissible length

    For the past few days ALL of my computers show the following message when I attempt to access ANYTHING to do with google:
    "Secure Connection Failed
    An error occurred during a connection to https://www.google.co.uk/firefox
    SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long)"
    1) When I remove the 's' from https, it works
    2) No difference if I attempt to access google.com or goggle.co.uk
    3) I do not have security.enable_ssl3 and security.enable_tls when I type about.config

    Do you have any content blocking software or security software that monitors secure connections?
    You can check the connection settings.
    *Tools > Options > Advanced > Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

  • I sporadically can't use certain Google features (Gmail, Documents, Calendar, etc.). The error I always get is "SSL received a record that exceeded the maximum permissible length. Error code: ssl_error_rx_record_too_long"

    SSL received a record that exceeded the maximum permissible length.
    Error code: ssl_error_rx_record_too_long
    I get the above message often (but not always) when trying to access my Gmail account, Google docs, calendar, etc. There's really no rhyme or reason for when it works vs. when it doesn't, but I've found that typing in something like "www.gmail.com" never works. When I use the history (or the search bar) it occasionally works.

    Just cleared out the cache and removed all cookies, but I'm getting the same error when I try to open my Google Calendar.
    (Gmail opened just fine a second ago)
    I'm a teacher and using my school-provided laptop from home. Could it be something with the school's network filter? (even though I'm not actually on their network)? How can I check?

  • ORA-22290: operation would exceed the maximum number of opened files or LOB

    i am getting this error in a procedure.
    ORA-22290: operation would exceed the maximum number of opened files or LOBs
    22290, 00000, "operation would exceed the maximum number of opened files or LOBs"
    // *Cause: The number of open files or LOBs has reached the maximum limit.
    // *Action: Close some of the opened files or LOBs and retry the operation.
    NAME TYPE VALUE
    session_max_open_files integer 10
    Procuedure:
    CREATE OR REPLACE PROCEDURE WMSOWN."PROC_WMS_XML_READ"
    P_EVENT_KEY IN VARCHAR2,
    X_STATUS_MSG OUT VARCHAR2,
    X_STATUS OUT NUMBER
    )AS
    l_parser dbms_xmlparser.Parser;
    domdoc xmldom.DOMDocument;
    nodelist XMLDOM.DOMNODELIST;
    node XMLDOM.DOMNODE;
    n_child XMLDOM.DOMNODE;
    elements XMLDOM.DOMELEMENT;
    name_node_map XMLDOM.DOMNAMEDNODEMAP;
    parent_seg varchar2(4000);
    tag_name_bkp varchar2(4000); -- LOOK OUT BRAD IS CODING AGAIN
    chile_seg VARCHAR2(4000);
    p_seg VARCHAR2(4000);
    p_seg1 VARCHAR2(4000);
    p_seg2 VARCHAR2(30);
    p_int_name VARCHAR2(50);
    col_value VARCHAR2(100):=NULL;
    len1 NUMBER;
    cnt NUMBER;
    seg_id_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
    sequence_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
    prev_sequence NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
    prev_seq_set VARCHAR2(3); --brad coding
    parent_id number; ---brad coding
    valid_seg NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
    data_status VARCHAR2(10);
    v_main_seg VARCHAR2(50);
    v_seq_no NUMBER;
    V_CLOBLOCATOR CLOB;
    V_FILELOCATOR BFILE;
    v_amount_to_load NUMBER;
    dest_offset NUMBER := 1;
    src_offset NUMBER := 1;
    lang_context NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
    warning NUMBER;
    v_event_name USR_OUB_FILE_PROCESS_DETAILS.EVENT_NAME%TYPE;
    v_file_name USR_OUB_FILE_PROCESS_DETAILS.FILE_NAME%TYPE;
    DIRECTORY_PATH_INVALID EXCEPTION;
    PRAGMA EXCEPTION_INIT(DIRECTORY_PATH_INVALID,-22285);
    NO_PRIVILEGES EXCEPTION;
    PRAGMA EXCEPTION_INIT(NO_PRIVILEGES,-22286);
    INVALID_DIRECTORY EXCEPTION;
    PRAGMA EXCEPTION_INIT(INVALID_DIRECTORY,-22287);
    FILE_NOT_FOUND EXCEPTION;
    PRAGMA EXCEPTION_INIT(FILE_NOT_FOUND,-22289);
    P_DIRECTORY VARCHAR2(50) :='WMS_XML_DIR_OUB';
    v_whid poldat_view.wh_id%type;
    BEGIN
    --NAME :  PROC_WMS_XML_READ.PLS
    --DESCRIPTION :
    -- Procedure PROC_WMS_XML_READ search XML files from remote location.
    -- Open,Parse and Read XML files. Store all XML values into tables.
    -- Developed by Dharmesh Patidar(jw782)
    -- History: New condition is added i.e. p_seg:=parent_seg to maintain PARENT and CHILD relationship
    -- by Vishwanath Dubey(jl246) on 17-June-2011
    -- BRAD_XML_DEBUG table removed for CLEANING Activity by DHARMESH PATIDAR(JW782) ON 29-JUNE-2011.
    /*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID START*/
    BEGIN
    SELECT event_name,file_name,WAREHOUSE_ID
    INTO v_event_name, v_file_name,v_whid
    FROM usr_oub_file_process_details
    WHERE event_id=p_event_key
    AND process_flag='U';
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Record is not available in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    WHEN TOO_MANY_ROWS THEN
    x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : More than one Records found in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    WHEN VALUE_ERROR THEN
    x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Varibale length is small or data type mismatch while selecting event id and event name in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    WHEN OTHERS THEN
    x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting event name and event id ';
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    END;
    /*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID END*/
    /*LOGIC TO READ XML FROM REMOTE LOCATION START*/
    DBMS_LOB.CREATETEMPORARY(V_CLOBLOCATOR, TRUE);
    V_FILELOCATOR := BFILENAME(P_DIRECTORY,V_FILE_NAME);
    DBMS_LOB.OPEN(V_FILELOCATOR,DBMS_LOB.FILE_READONLY);
    V_AMOUNT_TO_LOAD := DBMS_LOB.GETLENGTH(V_FILELOCATOR);
    DBMS_LOB.LOADCLOBFROMFILE(V_CLOBLOCATOR,
    V_FILELOCATOR ,
    V_AMOUNT_TO_LOAD,
    DEST_OFFSET,
    SRC_OFFSET,
    0,
    LANG_CONTEXT,
    WARNING);
    dbms_lob.close(V_FILELOCATOR);
    /*LOGIC TO READ XML FROM REMOTE LOCATION END*/
    /*Temporary Code to help with debug Clear the table before populating it with new data*/
    --delete table BRAD_XML_DEBUG;
    cnt:=1;
    seg_id_bkp:=0;
    data_status:='N';
    v_seq_no:=0;
    prev_seq_set:='NO';
    /*create new parser.*/
    l_parser := dbms_xmlparser.newParser;
    dbms_xmlparser.parseClob(l_parser, replace(V_CLOBLOCATOR,'&','1x2x3x4x5'));
    /*Parse the document and create a new DOM document.*/
    domdoc :=dbms_xmlparser.getDocument(l_parser);
    /* get all elements in the DOM*/
    nodelist := XMLDOM.getElementsByTagName(DOMDoc, '*');
    len1 := XMLDOM.getLength(nodelist);
    /* loop through elements of the DOM */
    FOR j in 1..len1-1 LOOP --MAIN LOOP START
    BEGIN
    /*below sql will fetch Node from table to travel xml data*/
    BEGIN
    SELECT int_name,tag_name
    INTO p_int_name, p_seg1
    FROM usr_wms_tag_det
    WHERE int_name=v_event_name
    AND seq_no =cnt;
    EXCEPTION
    --PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
    WHEN OTHERS THEN
    NULL;
    END;
    IF cnt=1 THEN
    v_main_seg:=p_seg1;
    END IF;
    EXCEPTION
    --PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
    WHEN no_data_found THEN
    null;
    WHEN OTHERS THEN
    x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting interface name and tag name'||sqlerrm;
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    END;
    /*LOGICS TO READ XML START*/
    node:=XMLDOM.item(nodelist, j);
    elements:=XMLDOM.makeElement(node);
    parent_seg:=(xmldom.getTagName(elements));
    tag_name_bkp:=(xmldom.getTagName(elements));
    name_node_map:=xmldom.getAttributes(node);
    n_child:=xmldom.getFirstChild(node);
    col_value:=xmldom.getNodeValue(n_child);
    /*get the sequence number from the interface hierarchy table */
    SELECT count(1)
    INTO valid_seg
    FROM usr_wms_tag_det
    WHERE int_name=v_event_name
    AND tag_name = tag_name_bkp;
    if valid_seg>0 then
    begin
    SELECT seq_no
    INTO sequence_bkp
    FROM usr_wms_tag_det
    WHERE int_name=v_event_name
    AND tag_name = tag_name_bkp;
    seg_id_bkp:=seg_id_bkp+1;
    p_seg:=parent_seg;--Modified by Vishwanath Dubey dated 16-jun-2011
    end;
    end if;
    if prev_seq_set = 'NO' then
    begin
    prev_sequence := sequence_bkp;
    prev_seq_set := 'YES';
    end;
    end if;
    if sequence_bkp < prev_sequence then --you just moved up level(s) in the message structure
    begin
    select max(seg_id)
    into parent_id
    from usr_wms_global_xml_det
    where seg_sequence = sequence_bkp-1;
    prev_sequence := sequence_bkp;
    end;
    end if;
    if sequence_bkp > prev_sequence then --you just moved down a level in the message structure
    parent_id := seg_id_bkp-1;
    prev_sequence := sequence_bkp;
    end if;
    /*end getting the hierarchy table sequence */
    /*LOGICS TO READ XML END */
    IF (parent_seg =p_seg1) or (parent_seg=p_seg2) THEN
    if parent_seg=v_main_seg then
    v_seq_no:=v_seq_no+1;
    end if;
    BEGIN
    /* INSERTING DATA LOGICS TO READ XML END */
    INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,parent_seg,seg_id_bkp,sequence_bkp,parent_id,'','','',J,v_seq_no,data_status,cnt);
    EXCEPTION
    WHEN OTHERS THEN
    x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    END ;
    p_seg:=parent_seg;
    p_seg2:=P_SEG1;
    cnt:=cnt+1;
    ELSE
    chile_seg:=parent_seg;
    BEGIN
    /* INSERTING DATA LOGICS TO READ XML END */
    INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,p_seg,seg_id_bkp,sequence_bkp,parent_id,'',chile_seg,replace(TRIM(Col_Value),'1x2x3x4x5','&'),J,v_seq_no,data_status,cnt);
    EXCEPTION
    WHEN OTHERS THEN
    x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    END;
    END IF;
    END LOOP; --MAIN LOOP END
    dbms_xmldom.freeDocument(DOMDoc);
    x_status:=0;
    EXCEPTION
    WHEN DIRECTORY_PATH_INVALID THEN
    x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ DIRECTORY PATH IS INVALID';
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    WHEN FILE_NOT_FOUND THEN
    x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ INVALID XML FILE NAME OR FILE DOES NOT EXISTS';
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    WHEN NO_PRIVILEGES THEN
    x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ Insufficient privileges on file or directory NAME- '||p_directory||' to perform FILEOPEN operation.';
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    RETURN;
    WHEN OTHERS THEN
    x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ '|| SQLERRM;
    x_status:=SQLCODE;
    proc_wms_error_trace(v_whid, --warehouse id
    null , --event id
    v_event_name , --event name
    x_status, --error code
    x_status_msg ); --error message
    dbms_xmlparser.freeParser(l_parser);
    dbms_xmldom.freeDocument(DOMDoc);
    RETURN;
    END PROC_WMS_XML_READ;
    Edited by: user13427480 on Feb 8, 2013 7:08 PM

    when you post sql statement use also similar threads :
    ORA-22290: operation would exceed the maximum number of opened files or LOB
    https://kr.forums.oracle.com/forums/thread.jspa?messageID=10842417                                                                                                                                                                                                                                                                                                                                                                                                           

  • The request exceeds the maximum allowed database size of 4 GB

    I have craeted a user in oracle 10g with following commands
    CRAETE USER USERNAME IDENTIFIED BY PASSWORD
    DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
    Grant create session to USERNAME;
    Grant create table to USERNAME;
    Grant create view to USERNAME;
    Grant create trigger to USERNAME;
    Grant create procedure to USERNAME;
    Grant create sequence to USERNAME;
    grant create synonym to USERNAME;
    after that when i want to craete a table i got following error
    SQL Error: ORA-00604: error occurred at recursive SQL level 1
    ORA-12952: The request exceeds the maximum allowed database size of 4 GB
    00604. 00000 - "error occurred at recursive SQL level %s"

    Error starting at line 1 in command:
    SELECT /* + RULE */ df.tablespace_name "Tablespace", df.bytes / (1024 * 1024) "Size (MB)", SUM(fs.bytes) / (1024 * 1024) "Free (MB)", Nvl(Round(SUM(fs.bytes) * 100 / df.bytes),1) "% Free", Round((df.bytes - SUM(fs.bytes)) * 100 / df.bytes) "% Used" FROM dba_free_space fs, (SELECT tablespace_name,SUM(bytes) bytes FROM dba_data_files GROUP BY tablespace_name) df WHERE fs.tablespace_name = df.tablespace_name GROUP BY df.tablespace_name,df.bytes
    UNION ALL
    SELECT /* + RULE */ df.tablespace_name tspace, fs.bytes / (1024 * 1024), SUM(df.bytes_free) / (1024 * 1024), Nvl(Round((SUM(fs.bytes) - df.bytes_used) * 100 / fs.bytes), 1), Round((SUM(fs.bytes) - df.bytes_free) * 100 / fs.bytes) FROM dba_temp_files fs, (SELECT tablespace_name,bytes_free,bytes_used FROM v$temp_space_header GROUP BY tablespace_name,bytes_free,bytes_used) df WHERE fs.tablespace_name = df.tablespace_name GROUP BY df.tablespace_name,fs.bytes,df.bytes_free,df.bytes_used ORDER BY 4 DESC
    Error at Command Line:1 Column:319
    Error report:
    SQL Error: ORA-00942: table or view does not exist
    00942. 00000 - "table or view does not exist"
    *Cause:   
    *Action:                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Your project exceeds the maximum content duration. idvd

    please help !! pleaseeeee
    i have been reading everyones questions and the answers!! but i still cant work it out as dont have a clue what im doing!!it says:-
    Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
    how do i do this
    my movie is very long !! but i want it all i dont mind having it on different discs !
    Project:
    - total project duration: 175:49 minutes
    - total project capacity: 8.867 GB (max. available: 4.172 GB)
    Menus:
    - number of menus in project: 1 menus
    - total menu duration: 14:56 minutes
    - total menu capacity: 63.243 MB
    Movies:
    - total movies duration: 160:53 minutes
    - total movies capacity: 8.805 GB
    please can someone help me just burn it
    many thanks

    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes, and uses Constant Bitrate (CBR) encoding.
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for videos of up to 120 minutes but of even higher quality (and takes much longer). Both Best Quality and Professional Quality uses Variable Bitrate (VBR) encoding. The advantages of VBR are that it produces a better quality-to-space ratio compared to a CBR file of the same data. The bits available are used more flexibly to encode the sound or video data more accurately, with fewer bits used in less demanding passages and more bits used in difficult-to-encode passages.
    A detailed explanation on how VBR encoding works can be read here:
    http://en.wikipedia.org/wiki/Variable_bitrate
    In both cases the 'maximum length' includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    This article has useful additional information:
    http://hints.macworld.com/article.php?story=20080812050651997
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

    How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

    http://support.apple.com/kb/HT4627

  • What is the maximum number of characters in an Oracle 10G Instance Name

    All,
    Can I know what is the maximum number of characters in an oracle 10g instance name under AIX? Is it 7 characters or 8 characters?
    regards
    Santhosh

    One should really make the difference between db_name and instance_name: if instance_name default value is db_name it can be different
    (even on a non RAC database).
    For example with Oracle 10.2.0.4 you can create a database named DB78 with instance_name=DB12345678:
    $ uname -a
    Linux lx01.localdomain 2.6.18-92.el5 #1 SMP Fri May 23 22:17:30 EDT 2008 i686 i686 i386 GNU/Linux
    $ ps -fu oracle | grep smon
    oracle    6353     1  0 20:30 ?        00:00:01 ora_smon_DB12345678
    oracle    6412  5596  0 20:37 pts/1    00:00:00 grep smon
    $ export ORACLE_SID=DB12345678
    $ sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 8 20:34:26 2010
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> show parameter name
    NAME                                 TYPE        VALUE
    db_file_name_convert                 string
    db_name                              string      DB78
    db_unique_name                       string      DB78
    global_names                         boolean     FALSE
    instance_name                        string      DB12345678
    lock_name_space                      string
    log_file_name_convert                string
    service_names                        string      DB78I would not recommend this practice: but it's interesting to know to avoid confusing between db_name and instance_name.

  • Why Cant I Add Drop Shadow? artwork size & resolution exceeds the maximum that can be rasterized

    I am making a sign for sign writing. The overall size is 2400mmx1800mm. so its quiet big.
    But When I go to put a drop shadow behind it it comes up with this -
    " The combination of artwork size & resolution exceeds the maximum that can be rasterized"
    Why is it saying this? How do I put a drop shadow on it?

    Try scaling the sign down to 600 x 450mm and building your drop shadow at a more manageable size.  When you deliver your file for output, tell the vendor to enlarge the file 400% in the RIP.  If it still will not work, check your HD for scratch space.  If there is not enough memory available to run the operation, you will continue getting the message until you clear some space and/or increase your RAM ( if necessary ).

  • HELP!!! layer 0 exceeds the maximum layer size allowed (DVD STUDIO PRO)

    when I try to burn a dual dvd with 7.1 gb on it. The discs are 8.5gb dual dvd's, it says this in the error box.
    Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.
    I have tried to dual layer break point on a chapter half way through and other locations, but it still says it. What do I do???? I need to get this done ASAP!!!!! Can you please help, its kinda a emegency!!!!!!
    please email me back at [email protected]
    Thanks so much
    G5   Mac OS X (10.4.6)  

    Hey timeline
    welcome to the apple boards...
    ill give you the easy fix, although i would recommend the proper fix.
    first, build your project on any of your drives so you can see your audio and video TS folders.
    once you see your build, then click on "Format" and before you click on format (on the lower right hand corner of the Format window, click on the second tab and under "Layer Break" click the drop down box and whatever is NOT greyed out, can be used as a layer break.
    the more proper way do it it would require you to do some calculations based on the amount of video in your project and re-encode your video.
    hope that helps
    Mikey M.

  • Formatting was not successful.  Layer 0 exceeds the maximum layer size

    I am attempting to burn my first dvd w/ dvdstudio pro. I pressed burn. Processing took approximately 25 minutes. Everything seems to be goin well. The I get the following message,
    "Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
    Can anyone help me out with this?
    The following info was in the build log,
    Starting DVD Build MUSICVIDEOMIXTAPE...
    Compiler Initializing...
    Precompiling Project MUSICVIDEOMIXTAPE
    Compiling VMG Information...
    Created 8 PGCs in VTSM1
    Created 5 PGCs in VTSM2
    Created 8 PGCs in VMG.
    1 Menu(s) will be created...
    Compiling Menu PGCs...
    Compiling Menu#1 (Menu 1)...
    Rendering Menu:Menu 1,Language:1...
    Generating Transition: VTSM #01, VOB #1...
    Writing VIDEO_TS.VOB
    Compiling Menu PGCs...
    Writing VTS020.VOB
    2 VTSs and 2 Titles will be created...
    Compiling VTS#1 (drivin me wild- Common & Lilly Allen)...
    Muxing VTS011.VOB
    Done.
    Compiling VTS#2 (d12 vid mix tape)...
    Writing VTS020.VOB
    Muxing VTS021.VOB
    Done.
    Linking VMG...
    Linking VTS#1...
    Linking VTS#2...
    Writing VTS#1...
    Writing VTS#2...
    Writing VMG...
    Writing Layout Info...
    Compile Completed Successfully
    Note: The file ‘MUSICVIDEOMIXTAPE.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
    Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

    It sounds like you are trying to burn a dual layer disc. Do you need a dual layer disc? (i.e., do you have more than 4.3 GB of material?) If you do then there is a tutorial at;
    http://www.kenstone.net/fcphomepage/dual_layer_mediagary.html

  • Layer 0 exceeds the maximum layer size allowed.

    I am getting the following message and do not know what to change in my pref.
    Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

    No change in preferences, it is something you need to make a marker for on a DL Disc
    On the layer break some threads below - basically there needs to be a marker somewhere so that is around 1/2 way give or take Take a look at the PDF pages 576-586 for some of the details.
    http://discussions.apple.com/thread.jspa?messageID=4274608&#4274608
    http://discussions.apple.com/thread.jspa?messageID=4470720&#4470720
    http://discussions.apple.com/thread.jspa?messageID=4309773&#4309773

  • Has exceeded the maximum permitted runtime

    Hello All,
    I am handling Insurance utilization report. It gives you information whether Insurance is covered by Consigner , Consignee or Insurance not required
    It's dumping in the production system because it's taking to much time to retrieve the data. The error message was <b>"Has exceeded the maximum permitted runtime without interruption, and has been terminated"</b>
    select bkpfxblnr bkpfbldat BKPFBUKRS ekbebewtp rbkplifnr rbkprmwwr ekbeebeln ekbeebelp ekbelfbnr ekbelfgja lfa1name1 lfa1ort01 lfa1~pstlz
    into corresponding fields of table i_table from lfa1 inner join rbkp on lfa1lifnr = rbkplifnr join ekbe on ekbebelnr = rbkpbelnr
                                               and ekbegjahr = rbkpgjahr join bkpf on bkpfbukrs = rbkpbukrs and bkpfxblnr = rbkpxblnr
                                               and bkpfbldat = rbkpbldat where bkpfblart = 'RE' and bkpfBSTAT = ' ' and bkpfbudat in s_date and bkpfbukrs in s_bukrs
                                               and rbkpblart = 'RE' and rbkpstblg = ' ' and ekbe~bewtp = 'Q'.
    please tell me how to increase the performance of the above statement or if there any other way I can handle this please let me know.
    Thanks & Best Regards,
        Mahesh

    Hello,
    Since your posting does not contain any information on the amount of data and used access path it's impossible to give any advice.
    Some remarks:
    - run the report in batch environment, in this case rdisp/max_wprun_time is ignored.
    - DB2 for z/OS or DB2 for LUW(DB6) ? If DB6 move the thread to the DB6 forum
    - if SAP standard report, open a problem ticket at SAP
    Regards,
    Thomas

  • The program "RIAFVC20 " has exceeded the maximum permitted runtime

    Hi  ,
        When running transaction IW49 we get a shortdump
    Details of Abap run time error follows
    The program "RIAFVC20 " has exceeded the maximum permitted runtime
    and has therefore been terminated.
    Can I have solution why this is happening.
    Thanks In advance
    Regards
    Suresh kanna

    Hello Suresh,
    It means the program has exceed maximum work process runtime value set to paramter rdisp/max_wprun_time in your system. If you believe this program runs beyond that value, I suggest you to run the program in background.
    If you can't run this in background, then increase the value of paramter rdisp/max_wprun_time. It is dynamic parameter (RZ11) where you don't need to restart SAP system after parameter change.
    Hope your query is answered.
    Thanks,
    Siva Kumar

  • The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB: MALAWI .pptx.

    The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB.
    I have had my macbook pro since June and have had no problems sending an email until I have tried to send a presentation today. The above message is what I keep receiving even after using 3 email accounts.

    Email providers often set file size limitations to conserve bandwidth and prevent service overload.  Most common seems to be a limit on the order of 21 MB.  If possible, break your presentation into two parts and send as two messages.

Maybe you are looking for