Idoc and order mapping

Hi,
How to find the relationship between the order and idoc in crm.
I have a sceneraio like if i give the idoc number it has to display the corresponding order number. Where can i find the link between this..
link between crm order and idoc.
Regards
Srinu
Message was edited by:
sreenivasulareddy eragamreddy

Hi,
IDOC for sales order is ORDERS05. Segment E1EDKA1, for field go to SE11 and enter E1EDKA1 to find field for sales order.
Cheers.
...Reward if useful.

Similar Messages

File to idoc and no mapping?

Hi
We are using PI 7.0
IDOCFileSender->PI7.0->ALERECEIVER
we have a file in the "native" file format for an idoc, we now would like to process this file through PI and sending it to our SAP systems ALE layer. We are not allowed to call the ALE adapter directly in our SAP system from the system generating the native idoc format - it must be done only through PI !
My question is if it is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping? In that case what should the Message Type we are using in the file-sender adapter look like?
Hope for some help.
Thx

Hi,
>is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping?
yes
>In that case what should the Message Type we are using in the file-sender adapter look like?
If you have no mapping it doesnt matter, the message type will not be validated during runtime. You can take the IDoc type imported from the SAP system
Regards,
Udo

IDoc and Message Mapping

Hi,
I have a question.
In a idoc to file scenario,idoc as a sender,.If the idoc is updated in r/3 system due to some change request after we finish the mesage mapping,what steps need to be followed to ensure the correct mapping.
Do we need to change the mapping.
Regards,
Haritha

Hello,
if just the values of your IDoc changed you don't have to change
your message mapping.
If the structure has changed you have to reload the metadata (idx2)
and the IDoc in your Repository and then update your message mapping with reloading your IDoc.
Regards
Patrick

IDoc and creation of sales order!!

Hi,
I need to create sales order using IDoc and the file will have multiple line items for sales order and it has to be dynamic, so whats the best way to do this?
Regards
Gunjan

Hi
Check for the related IDOC types in EDBAS table and for related Message Types
in table EDMSG. take relavent one for your requirement and use.
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
Reward points if useful
Regards
Anji

Pass through scenario in SAP PI with no mapping for File to IDoc and Idoc to file scenarios

Hi Experts,
Can i have step by step process in SAP PI for pass through scenario with no mapping in case of file to Idoc and Idoc to file both cases please.
What objects i can skip.
My PI system is 7.3 dual stack.
I have seen below blogs, still its confusing to me.
When and how to create an scenario in SAP PI without mapping objects.
Pass Through Scenario with no Mapping in PI 7.1
Appreciate your help on this.
Regards,
Mohan.

Hi Mohan
In pass thru interface you don't need to create any ESR objects, only ID objects are required.
Just Create a Receiver Determination and Receiver Agreement for your scenario (no need for Interface Det. and Sender Agreement).
Specify the IDOC in the Sender Interface and namespace as urn:sap-com:document:sap:idoc:messages
Or instead of creating objects manually, Run the wizard with Idoc name/namespace in sender/receiver interface
Regards
Osman

ORDCHG.ORDERS05.ZORDERS and ORDERS.ORDERS05 Idocs

Hi all,
We have two mappings for the message types ORDCHG and ORDERS.
I have problem with the ORDCHG occurance.
ZORDERS 1...1 -
>Record set 0...unboundedfor both ORDCHG and ORDERS is used..
When ever ORDCHG message type is used the below error thrown in test tab of message mapping.
Cannot produce target element /ns0:MT_FILE_MUL/Recordset/Records. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
the occurances used for both are same .orders is working fine but ordchg throws the above error if i change the occurance it is sucess but no output seen.(empty payload).What is the problem i am confused.
Thanks Srinivasa

> the occurances used for both are same .orders is working fine but ordchg throws the above error if i change the occurance it is sucess but no output seen.(empty payload).What is the problem i am confused.
This kind of problem comes in mapping when you have not filled any mandatory node or field. So varify them all first. Because that is the reason when you change the occurence then it works.
Also check if you have mapped all Root nodes. Secondly make sure if you have used any condition on root nodes then they must fulfill the conditions. And lastly make sure you are using the correct data for testing.
Regards,
Sarvesh

Difference in idoc adapter header mapping between SP14 and SP19

Hi All,
i have a very strange problem.......i have 2 XI systems : XI-sandbox and XI-dev.....
XI-sandbox is on XI3.0 SP19 whereas XI-dev is on XI3.0 SP14...........
I have a file->XI->idoc scenario which is same on both XI-sandbox and XI-dev....
in receiver idoc adapter, i am using header mapping for sender service and in the sender service i am using XPATH of a field of control rec of idoc.........
this scenario works fine on XI-sandbox which is on SP19 and the idocs are sent to SAP R/3 sandbox...........but this scenario on XI-dev gives error in SXMB_MONI in XI-dev of Call adapter - "No party conversion found".........
So my question is that is there any difference in idoc adapter header mapping between SP14 and SP19.........
Thanks,
Rajeev Gupta
Message was edited by:
RAJEEV GUPTA

><i>so i cant use apply control rec values from payload.........</i>
rajeev,
I know this has nothing to do with the original problem but please do bear.
If I undertood you posts correct, the Sender Partner Name is set in the Idoc Control record in the field SNDPRN in the mapping using some mapping logic.
Now, this is the partner name with which the idoc is to be posted to thge R3 system.
if yes, then like I have pointed above, using "Take Sender From Payload" in the Receivcer Idoc Adapter is a better option as pointed in the SAP help as well.
As you are already populating the idoc control ecord with SNDPRN just make the SNDPRT as LS and then select "Take Sender from Payload" in the receiver Idoc adapter and the Sender Partner Name will not be taken from SDNPRN just as you want.
This is different from "Apply Control Records From Payload" .
Regards
Bhavesh
PS : you can ignore this reply if the situatios is too late to make this change and thanks for the patience.

Domain value Mapping for Supply chain and order management analytics

Hi Experts.
I'm new to BI Applications. I'm configuring Oracle Supply chain analytics and order management analytics and i see in the configuration guide that we need to
Map each Status Code to one domain value. I dont understand what this means? what is meant by domain value and how can we map the data retreived by the query with the domain values.
Appreciate your help.
Thanks
Rajesh

Hi Deepak.
Our functional analysts dont understand what domain values means. they have run the query but since they dont understand what Domain values means they could not proceed.
Pls could you give an example of how to map the data retrieved with the domain values ?
Appreciate your help
Thanks
Rajesh
Edited by: user4159900 on Aug 22, 2011 12:17 AM
Edited by: user4159900 on Aug 22, 2011 12:18 AM

Difference between MAP member and ORDER member method in PLSQL Object Type

Hi all,
I need to know clear explanation about the MAP and ORDER member method and its Difference.Please share if you know.
thanks in advance.
regards,
Lokesh
Edited by: 972864 on Dec 10, 2012 1:50 AM

http://docs.oracle.com/cd/B28359_01/appdev.111/b28371/adobjbas.htm#autoId13

How to tranfer IDOC and BAPI through LSMW

Hi friends,
I need documents regarding processing of IDOC and BAPi through LSMW,
Thanks In advance,
Regards,
charan

Hi
LSMW-BAPI
Step-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed
It is given in screen shot.
http://www.****************
LSMW-IDOC
see this and do accordingly
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
Go through the steps
Hi please go through the following steps for IDOC method
Step 1. Run the transaction ( /nlsmw ) you will reach to the screen
Here you have to specify
Project : 060_BUS_TRANS
Subproject : SERVICE_TICKET
Object : SRV_TICKET_ZSVT
click on the execute button .you will reach the screen :
The screen shows the 15 steps to Run the lsmw
Step 2) select the first step ( Maintain object attributes) and click the execute button.After clicking on the execute button you will reach at. the screen
Here you have to specify ( MEssage type and basic type)
click on the BACK button
Step 3) select the 2nd step ( Maintain source structures) and click the execute button
Here you have to specify the source structures.
Step 4) Select the 3rd step ( Maintain source fields) and click on the execute button :
Here you have to specify the fields present in the source structure
Step 5) select the 4th step ( Maintain structure relationship ) and click on the execute button :
Here you have to specify relationship between source and target structures
Step 6) select the 5th step ( Maintain field mapping ) and click on the exécute button :
Here you have to map the fields between source and target structure. Also you have to apply conversion rules here if any
STEP 7) select the 6th step and click on the exécute button
Here you can define any fixed value or user define routines
Step 8) select the 7th step ( Specify files) and click on the exécute button :
At This screen we have to specify the files for This we should be in change mode .So please click on the button shown in the above screen. After clicking on This button you will be in change mode and will be able to specify the files :
Step 9) select the 8th step ( Assign files) and click on the exécute button
For assigning files yoy should be in change mode do the same thing click on the button as shown in the above screen :
Then assign the files to different structures.
Step 10 ) select the 9th step ( Read Data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Again click on the exécute button . After clicking on the exécute button you will reach to the next screen
Here you will see data is read.
Step 11) select the 10th step ( Display read data) and click on the exécute button :
Here you can see your test data present in test files assign to source sturcture
Step 12 ) select the 11th step ( Convert data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Click on the exécute button as shown on the : After click on the exécute button you will reach to the next screen
Data is converted
Step 12th ( Display converted data is same as Display read data )
Step 13 ) select the 13th step ( Start idoc generation) and click on the exécute
button :
At this step Idoc is generated using converted data
Step 14) select the 14th step ( Start idoc processing ) and click on the exécute button :
After clicking on the exécute button you will reach to the screen :
And then click on the exécute button : After clicking on the exécute button you will reach to the final processive screen
If data is processed correctly you will see ( 53 Status message with green sign)
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
Reward points for useful Answers
Regards
Anji

CIf - idoc or table mapping

Hi Expert
I need a small clarification. When an order is tranferred fom APO to R/3, does it create an idoc and sends it to R/3 or its table to table mapping between two system. Do any of have idea about document/ format in which the data is transferred from APO to R/3.
Please help

Hi Pushpinder,
Transfer of orders from APO & R/3 and vice versa is OLTP ie online transfer processing system.
The data will get transferred via change pointers. For every change, there will be equivalent change pointers gets generated in system and gets updated.
The change pointers either can be immediately sent to the target system from source system or there is
also another option of collecting all change pointers and transfer it periodicially.
Manually, change pointers can be pushed to target system via transaction /sapapo/c5.
I hope it is clear now.
Regards
R. Senthil Mareeswaran.

Diff b/w msg mapping and interface mapping

hi
i have some doubt's:
1. diff b/w msg mapping and interface mapping
2. What is product in SLD? usually who creates the product,technical,business system??
thx in advance..

hI Smartsoft General User ,
The following r excellent websites on mapping which differentiate msg mapping and interface mapping in detail:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
These r excellent websites in SLD:
How ToHandle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How ToHandle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
http://www.sap-press.de/download/dateien/751/sap_press_exchange_infra_engl.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

Order confirmation and Order changes

Hello Guru's,
I am having following issue, please let me know ur inputs on the same how to handle below situation.
There is Customer Vendor relationship under one system and under one company code.
Customer orders goods from Vendor and this Vendor supplies goods against this PO. These are nothing but plants in reality.
1) There is no issue when creating SO against the PO raised..
2) Once the SO is created how to send sales order confirmation and how to add the confirmation line in PO?
3) When the sales is changed and changes made at the time of sales order creation wrt to PO from customer: how to send these changes to customer and update his PO also.
Please let me know if anyone has gone thr' such situation. This should happen via ALE IDOC only.
Best regards,
Prasad

Hi Kris,
It's ok.. as I knew the process.
The problem I had, when I change sales order and trigger ORDERS05 and ORDRSP idoc then it shows changes but also it shows all the sales order data.
The requirement which I have is as below:
1) If the sales order is changed then send only changed data and update the PO at customer side which is in same system.
i.e. let us say sales order is created and confirmation also send via ORDERS05 and ORDRSP. Now when SO is changed for quantity and price, then I want to send only these quantity and price changes via idoc and update PO accordingly.
This also applies for back order processing or supersession, where date or item itself can be changed or added.
Please come back if knows further.. Awaiting for ur reply.
I am interested to know what steps I have to follow and even if any routine I need to write to capture these changes.
Best regards,
Guru

Give me description for ABAP and XSLT and JAVA Mapping

i want detailed description for XSLT AND ABAP,JAVA Mapping and where they require coding and some examples for this items and differences for these mappings and message mapping and some examples which shows difference between these items

Hi,
Java mapping:
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
ABAP Mapping:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
XSLT mapping
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
ABAP XSLT mapping
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
Regards
Vijaya

Any website for XSLT AND ABAP mapping

Hi XI experts,
I am looking for any good website/Material for XSLT and ABAP Mapping with examples.
So experts if you any one of you have any clue , i would appreciate it , if you post the info here .
Regds,
Ram.

Hi,
For XSLT mapping, please try to create msg types for sender and recv, import these two into XML Mapforces (This is a software which enables us to do mapping this you can download from altova mapforce site) , do mapping in that mapforce , late click on XSLT icon , one XSLT file will be c reated that file , prepare zip and late come to xi , import under imported archieves,do Interface mapping by selecting the XSLT mapping option, select imported archieve..
See below examples..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
http://www.troobloo.com/tech/xslt.toc.shtml
http://www.w3schools.com/xsl/
http://www.w3.org/TR/xslt
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic%20xslt%20mapping%20in%20sap%20xi%2c%20part%20i.pdf
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Required XSLT Mapping tips!
Regards
Chilla..

Idoc and order mapping

Similar Messages

Maybe you are looking for