IDOC change pointer key filtering

Hi Experts,
I have created a message type ( ymatmas_xxxx ) and activated change pointers for this message type.
So now may requriement is :
If I have activated 10 fields in chanage pointer , so IDOC should trigger only if any of the 10 fields are changed in material master ;
But my problem is;
there should be another filtering done for MAKTX-SPRAS = "E". so that only when description of materail in English language is changed then IDOC should trigger. ( For same material if some other language is triggered then idoc should not trigger )
I have checked customer exit and restricted the MAKTX-spras = 'EN' but what happens is even if other language is changed IDOC is getting triggered for english language; how do SAP know for which language is material description has changed.
Please advice is any other way to overcome this situation

Hi,
You can not do selective value based filtters on change pointers. Instead you can use ALE filters.
Also, instead of making code change you can achieve it via configuration. You can create filter in your distribution model. As E1MAKTM is a mandatory segment in the IDOC, the IDOC generation will need atleast one E1MAKTM segment. If you filter all the languages <> "EN" then SAP IDOC genration process will remove ALE segment, E1MAKTM where language <> "EN". Once it deletes segment, it atleast need one E1NAKTM segment to genearte the IDOC, if there is one change for EN then only system will generate the IDOC. You can configure the filters per receiver so that you dont have to apply filters for some other receiver.
To configure the filters you can use transaction BD64 and change the distibution model. If you do not have field for E1MAKTM segment then you have to add the fields via transaction "BD59". Also you can create your own ALE object type using "BD95".
I hope this resolves your issue.
Cheers,

Similar Messages

IDOC Change Pointer

Hi Experts,
I have a doubt related to change pointer and new record coming from SAP system as a IDOC in XML format. How do i come to know whether it is a change pointer or its new(create) record comin from SAP. for example in MATMAS05. Is there any field in a segment that indicates this scenario.
Thanks,
Anil Pinto

Hi,
You can check in t code - BDCP. All the change pointer entries are logged in this table.
there will not be any field in idoc which can tell you if it is change pointer or new entry.
you generally defined changes pointers for any segments or any field within a segement or in general for any changes made.
For more info please refer following threads.
Change pointers for custom idoc
change pointers in ALE/IDOCs
Hope this helps.
Regards,
Deepak.

Regarding Idoc Change Pointer

Hi All,
I created a generic article in ECC 6.0 with 5 variants.I gave them sales price n created the idoc with 05.05.2008 to 31.12.9999 validity period.when i check the idoc, idoc consist of only two records of them.
for next 3 variants, idoc was not created.
system date is 06.05.2008 but calendar date is 05.05.2008.
Can any one help me why idoc is not getting created for this 3 variants?
When i am changing sales price of this 3 article alone, idoc is not getting created.
Thanx in advance
Vikas

Hello Aakash,
You need to activate change pointer for all the fields of material master. Use transaction BD52 and provide message type for material mater then it will display fall the fields. Select the required fields for with check box to active the change pointer on them.
Hope this helps!
Thanks,
Augustin.

Idoc change point automatically

Hi,
I've been this article reagarding change pointer on ALE.
looks like after setting ALE, for change BD21, create BD10 for MATMAS manually, and if i want to do automatically, i have to schedule RBDMIDOC report program periodically(5 min every).
i just doubt that R/3 ALE can not configure without batch program(RBDMIDOC) in order to send IDOC(created or update or delete) automatically(real-time)?
batch RBDMIDOC program for 5min can not be real-time,
just looks like near real-time.
any idea?
thanks
venjmain

Hai Venjamin
do the following settings
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
        save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
   select all what ever you want and delete remaining fields.
   save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
   it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
   give Message type : MATMAS and Executte
Thanks & regards
Sreenivasulu P

In ALE/IDOC Change Pointer using Maintenance order for message Type

Hi All Expert,
I am using Maintenace order to send via ALE/IDOC(Change ponters), i need standard message Name for Maintenance Order,

Hello,
I'm not sure you're taking the best approch.
Usually when you need to migrate ISU contracts into an ISU-CRM integrated system, you first migrate everything you need in ISU through the VERY powerful migration workbench available (transaction code EMIGALL), and then you replicate your data to CRM via INITIAL download.
That's definitely the strategy that will give you the best performance, and less work.
Kind regards,
Nicolas Busson.

ALE Idoc Change Pointer Question

Though I selected Transfer Immediately on Partner Profile screen, why Idoc hasn't been generated and transmitted?. Why do I have run RBDMIDOC explicitely to pickup change pointers?. Appreciate your responses.

Hi Appana,
Thank you for your time. I did checked all these steps still no luck.
1.Go to the Data Element of the field and check whether change doucment option is checked or not .
DONE
2.change the value of the field and check the entries in CDHDR and CDPOS.here u can check the change document object and table .
DONE
3.check BDCP table also incase of ALE.The program RBDMIDOC generates IDOc when there is an entry in BDCP.
if not check the following config
1.BD61- change pointers activated -generally
DONE
2.BD50 -Activate change pointers for ur message type
DONE
3.BD52 - add the triggering fields and corresponding tables and change document object.
DONE
Please check the entries in BDCP table ,if u find the entries execute the program RBDMIDOC
DONE
Any places I missed ? Please note usual ALE config has been done like SM59,WE,20,WE21 etc. Iam basically sending this Idoc to XI and then to 3rd party system.

Suppress Non Changed Fields in change pointer triggered IDOC

I have a requirement to clone message type MATMAS as ZMATMAS. This ZMATMAS is the message type I used to create change pointer triggering outbound idoc for change/create of materials.
When i change a material, all fields are sent instead of the fields only changed(of course key fields should be sent as well). Is there a way via configuration that I can suppress fields which are not changed? Or do i need to clone FM MASTERIDOC_CREATE_SMD_MATMAS and suppress the fields via program
Thanks in Advance!

i'll clarify the requirement again.
Let say i changed a field BRGEW in the material master.
Currently, all the segements which contains BRGEW is sent, but these segements contains other data which are not changed in the material master.
How do i suppress it?
Thanks,

Change Pointer Program for IDOC creation..??

To All
Where does the message type is assigned, which allow that type of IDOC getting created in WPMU...??
Can COND_A be created in Change pointer Program...??
If possible ..How...??
Thanks
Sumeet

3)
RBDMOIND to confirm whether idocs have been successfully
dispatched to the receiver..and v can also use this program to change the status of idoc from 3 to 12....
RSNATED is the program used for triggering IDOC for the output type..where the output medium is 6.
And the subroutine that triggers the IDOC in the program is EDI_PROCESSING.
RSNASTED itself determines the associated IDoc outbound function module, executes it to fill the EDIDx tables and passes the prepared IDoc to the port.
You can call the standard processing routines from any ABAP, by executing the following call to the routine. You only have to make sure that the structure NAST is declared with the tables statement in the calling routine and that you fill the at least the key part and the routing information before.
TABLES NAST.
NAST-MANDT = SY-MANDT.
NAST-KSCHL = 'ZEDIK'.
NAST-KAPPL = 'V1'.
NAST-OBJKY = '0012345678'.
NAST-PARNR = 'D012345678'.
PERFORM einzelnachricht_screen(RSNAST00).
Calling einzelnachricht_screen determines how the message is processed. If you want to force the IDoc-processing you can call it directly:
TNAPR-PROGN = ''.
TNAPR-ROUTN = 'ENTRY'.
PERFORM edi_processing(RSNASTED).
~~Guduri

How to find - Customer Master IDoc was created Manually or by Change pointe

Hi all,
I have an IDoc(Customer master) number (which I have taken from the payload in SXMB_MONI). I would like to know whether this has been created by a user manually(BD14) or by a change pointer.
Please help.
Cheers
danus

Hi Vardharajan,
Yes I agree with you. What I mean by IDoc created by change pointer is - 'IDoc generated because a change(pointer) is tracked by the system', in other words, due to some change made to the data.
As you know, the other option of creating IDoc is by BDxx transaction. This option is usually used to push (unchanged) data.
So in essence, what I am interested to know is , has the IDoc been generated because someone made a change using say, VD02 / XD02 or pushed the data manually.
Please do ask, if anything is not clear.
cheers
danus

Idoc trigerring with change pointer under conditions

Hello dear experts
Could you please tell me how can i trigger an outbound idoc using the change pointer ( RBDMIDOC program)?
I have to generate the ARTMAS outbound idoc ONLY when the material status which is the table MARA is set to a certain value.
I can manage to trigger the outbound idoc but i did not manage to restrict this triggering according to the value of the material status fields.
Thanks for all your answers.
Best Regards.
Yannick

I tested using filter on Dist Wh and change pointers - for us, Dist Wh filter for material set on plant. When we made change to matierial, only if change to plant was made, so plant was included in idoc segment, did the filter work. If change material description, plant not on idoc segment so was sent . Looking for alternative...

Vendor Master IDOC (CREMAS) and change pointer activation..

Hi Guys..
I am using CREMAS idoc to transfer Vendor Master data to 3rd party system..
I configure the change pointer in SALE..
BDCP
BD61
BD50
BD52
But when I make changes in vendor master.. its not creating the idoc immediately.. I have to run RBDMIDOC manually.. to create the idoc..
How to make it create immediately.. ?
Also if I make a change in Email.. its not creating idoc at all.. !
Thanks for Ur time..

posting it in data transfer forum..

Regrading change pointer IDOC

Hi experts:
I want to add a change pointer for a field, however a message says that "choose Choose the key from the allowed namespace", how can I identify which field is in namespace. please do me a favor.
thank you very much.

Hi Frank,
Sorry, I tried to use T-code BD52 to add one field to message type MATMAS, but there are different objects to choose, for example,
I chose Material and one field of mara to MATMAS, when press enter key, a message popped up saying they are not in the same namespace.
would you please tell me which field of which table can be added into which object ?
While adding any fields to the message type MATMAS we need to give the Object, Table name and Field name.
If we want to add any fields to the message type MATMAS we need check wheather the field is present in the table which we are specifing or not . if we give the field which is already present in the table then it gives the warning message 'Choose the Key from the allowed namesapce'. If we again press enter then it gives the error message 'An entry already with the same key'.
So, we need to check for the fields which are present in the table ( Table Name) and which are not given before.
Best regards,
raam

XI IDOC Master Data Synch with Change Pointer (GLMAST)

Hi,
I have scenario to create integration between 2 SAP system with XI 7.0 using IDOC - GLMAST. I already acitvate Change Pointer Globally (BD61) and Activate Change Pointer for GLMAST (BD50).
The problem is whenever changes have done in system 1, 2 IDOC generated, First IDOC to Logical System PRODUCTION and second IDOC to Logical System SALES.
In order to seding the IDOC i have scheduled report RBDMIDOC. My question is how i can modify the IDOC target port in stead of send to PRODUCTION and SALES to others port (XI in this case).
Thank you and Regards
Fernand

Hi Prateek
I already create partner profile and port for XI and add GLMAST. but then the IDOC generated alwasy sent to PRODUCTION and SALES partner profile.
How to disable that IDOC to send to PRODUCTION and SALES partner profile and only send to XI Profile ?
Thank you and Regards
Fernand

IDOC to XI (Using Change Pointer) - Error

Hi all,
I have 1 scenario to update external GL master data using XI. in this case i already configure the source system (SAP) to sending the IDOC to XI whenever got changes.
BD61 ---> Activate Change Pointer Globally,
BD50 ---> Activate Change Pointer for GLMAST Message Type.
SM59 ---> RFC destination for XI system (PX6CLNT300).
BD54 ---> Logical System source (ST6CLNT100) and target xi (PX6CLNT300)
WE20 ---> Partner Profile for XI (PX6CLNT300).
BD64 ---> Create Distribution Model View. Sender = ST6CLNT100, Receiver = PX6CLNT300 and Message Type = GLMAST
The system can generate the IDOC whenever changes happen with running program RBDMIDOC. but the got error with no sender / receiver information in WE05.
Please advise any step that i have to do ?
Best Regards
Fernand

Hi Matias,
Thank you for your answer. The problem is because i had used wrong logical system in my distribusion model. The system using not common logical system. nomarly it will use "PX6CLNT100" but in my system the basis people using different logical system that's why the GLMAST IDOC cannot pass throught to XI system.
Best Regards
Fernand

Change Pointer to create IDoc

I wrote report program to create outbound IDoc. In the report, to capture create/ change I used table 'CDHDR'. Now I require below clarifications:
1.     Clarify the process of u2018Change pointeru2019 regarding IDoc.
2.     Is it recommended to use u2018Change pointeru2019 to create Outbound IDoc?
a.     If yes, then why do we write report or function module?
b.     Can we use custom message type in this process or only standard message types will work?

Hi
Change Pointer IDOC..??
Regards
pavan

IDOC change pointer key filtering

Similar Messages

Maybe you are looking for