IDOC Mapping ; Error CX_XMS_SYSERR_MAPPING

After we transfered an IDoc 1:1, w/o mapping, successfully from one to another SAP system, we added a mapping like follows:
1. created a message mapping per drag&drop from imported objects - IDocs, using a 1:1 mapping (no field changes, just for testing purposes)
2. created an interface mapping using that message mapping.
3. after activating in repository, we added that interface mapping in interface determination in configured inbound-interfaces.
After starting a test data transfer we received the error message
"CX_XMS_SYSERR_MAPPING Programm: CL_XMS_MAIN===================CP, Include CL_XMS_MAIN===================CM00A, line: 535"
And an odd error id with strange crosses in the overview.
Did we forget something? Any hint is welcome.

@Sridhar: Thanks for the hint, but unfortunately it did not change anything. Do you think it has something to do with cached information?
@Bill: Yes, we test it in the IB Repository using the mapping tool. The mapping is very simpel each field from the source IDoc is mapped to the same field in the target IDoc.
Maybe the problem ist because of the different SAP releases (we send from an 4.6C to an 4.7) ?

Similar Messages

  • File to idoc mapping error

    Hi,
    I am mapping a flat file to idoc in xi. If I execute the test data it works fine. But in actual run, it gave me the following mapping error:
    com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_MT_APPayment_to_FIDCCP02_: Runt
    imeException in Message-Mapping transformatio~
    Exception of class CX_XMS_SYSERR_MAPPING
    Is it due to some mapping error or some basis config issue?
    Thanks,
    Jassi

    Hi Jassi,
    This may be a mapping issue, try this:
    a)in interface mapping see if grids are formed at source and target after executing the test option,
    b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
    Check the following link:
    /people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
    Amaresh

  • JDBC to Idoc Mapping error

    Hi all,
    i need help for my JDBC to IDoc-scenario.
    I Select some data from the db and everything is fine.
    Before the mapping I can see all in the payload, but after mapping only the constants were mapped.
    Hope someone can help me.
    Regards,
    Jörg

    Hi ,
    Please provide the mapping details in src mode.
    Please check these points -
    1) each row of the DB is set to one recursive segment of IDOC .
    2)Check wether you have set all the Mandatory fields of IDOC .
    Test the mapping in test Tab of mappiung using payload message in MONI ...
    Regards,
    Nanda

  • Mapping Error- In IDoc to File scenario

    Hi Experts,
    Got the Mapping error for one interface (IDoc to file). After comparing with successful message found that the field value (TDLINE) is not availbale in first segment (E1EDT10) in idoc for this failed one.
    Mapping is :
    TDLINE -- Exists --- Creatif --- Receiver field(in the file)
    But here due to the the empty value in first segment the message is failed in XI system, next segment values is not trasmitted to the recever end(maping is the same above). To overcome this issue please suggest the suitable mapping design in IR.
    Regards
    Mahesh

    Hi,
    After your CreateIf, use a "IfWithoutElse" by selecting the properties "Keep SUPPRESS Values". To do that, do a right click on IfWithoutElse, choose "Properties".
    With this option, you will keep the fact that you have nothing in the source, and so the target context will have a "SUPPRESS" line.  I have not THE solution, so do your own test.
    If it's not enough, see also about the "mapWithDefault" (but that depends of your real rule).
    Regards.
    Mickael

  • IDOC Serialization(EOIO) using IDOC Adapter throwing Mapping error

    Hello SDN Gurus,
    The scenario I am working on is IDOC(PAYEXT & EUPEXR) --> XI (ABAP Mapping) --> Flat File (IDOC Structure).
    The IDOCS produced in Appl system may be in the following order
    PAYEXT
    PAYEXT
    EUPEXR
    PAYEXT
    PAYEXT
    PAYEXT
    EUPEXR
    I need them to be processed in the same order into flat file.
    The scenario is working good except for the serialization. So I did the following
    Created two entries in IDXQUEUE one for each message type with the same Queue name in XI system.
    Created a new rule for the queue and an associated function module. Used this rule in partner profile for both the message types.  I used the following link to create the above two steps.
    /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
    The SAP system in based on WAS 6.4.
    I can see the queue name & EOIO in the inbound message header.
    I am getting a mapping error in ABAP program. If I inactivate the queue(in Appl system SAP ECC), I don't get any error.
    Does anybody had this problem earlier? Please advice.
    Thanks
    Srini Vaidyam

    I found an OSS note to resolve my issue. The note number is 1057573.
    Whenever the queue is activated, the sender system will not send the <TABNAM> field value in EDI_DC40 structure. This note addresses this problem.
    I found out this by comparing the results from SXI_MAPPING_TEST individually for the message that failed after queue is activated and the message that was successful if the queue is inactivated.
    Only thing I noticed now is even if you selected the radio button "Trasfer Immediately" in Partner profile of Appl. system, the messages are not sent. They are getting collected. So we need to manually push them out using WE14.
    This forum Rocks.
    Thanks. 
    Srini Vaidyam

  • MAPPING ERROR with IDOC

    Hi Friends,
           I am working on IDOC to JDBC scenario. Here i am using DEBMAS06 IDOC . when i tried to trigger an IDOC from BD12 T code its triggering an idoc but when i see it in MONI of XI, its giving mapping error. when i test my mapping program its executing successfully. even i tried to execute  with the incoming data in the sxmb_moni, i mean that i filles my mapping test with the same data coming into MONI  by filling all the segments coming into XI its executing successfully in mapping test.
       but  when i tried to trigger an idoc from we19 or from bd54 i am facing this error. can any one please let me know what else i can do for running  this scenario. let me know your comments.
    Thanks
    Ramana.

    Hi friends, I am getting the following error. On the sender side we dont need to take care of the structure because we will be importing the IDOC from the application system directly. on the receiver side i have created the structure for the data base. the mapping is running  fine in my mapping test. still i am not getting what else i need to do. please comment on this.
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MessageMapping_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MessageMapping_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

  • Idoc error mapping error for segment "E1EDT13 006" in DESADV idoc

    Hi SAP Gurus,
    DESADV IDOC for few articles is not getting passed from SAP to legacy system. It is missing one segment"E1EDT13 006" for goods issue.
    Why is this mapping error happening. How can this be resolved.
    Regards.
    Sumi

    Hi Nsangle/SAP gurus,
    Thanks for  that. But, I have already compared the failing idoc with the successful one. It's the segment E1EDT13 006 missing in the wrong idoc. I have already added that idoc and reprocessed it.
    But, I wanted to know why such kind of idoc segment missing/ mapping error happens.
    Regards.
    Sumi

  • Catch Mapping Error in File to IDoc scenario

    Configured BPM and now learning Error Handling. I know that through BPM we can handle system Errors, but I doubt whether Mapping error is a system error.
    I am interested to know the classification of errors with examples, preferably listing out all types of errors.
    Please provide some weblogs or explain briefly how to handle system and application errors through BPM.
    Thanks,
    Raja

    Hi Raja,
    You will need CCMS if you want to send the Alerts to external system or you want to access the ALerts from the transaction. You can capture your alerts without this also.
    When you go to Alert Configuration in the Runtime Workbench you can see Create Alert Rules. These rules are pertaining to the error generated in your AF,AE or IE.
    Once you have completed the whole config. The error happening in the AE, IE or AF would trigger the alert. you can see this in your Alert Inbox.
    The best would be if you go through the URL I have mentioned below.
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
    You have to use BPM only if you want to do an activity after the alerts are raised. 
    Regards
    Vijaya
    Message was edited by: vijaya kumari

  • IDOC-XI-JDBC: mapping error

    Hi sap gurus...
            I had a problem in IDOC mapping to JDBC.
    If any body have mapping template or any blog.. related to MATMAS.. please help me..
    I don't know how to map the idoc structure to JDBC structure..
    points will be given immediately..
    Kumar

    Hi sheetal
    My IDOC structure is----
    MY JDBC Struc is
    as................................................................MT_MATMAS_MSSQL(Msg type name)
    This struc...is common----
    STATEMENTNAME(0..1)
    ............................................................................TEST (1..1)
    .................................................................................ACTION ..REQUIRED
    .................................................................................TABLE...(MATMAS TABLE IS CREATED IN MSSQL)
    .................................................................................ACCESS(1..1)
    ......................................................................................BEGIN ...REQUIRED
    ......................................................................................EDI_DC40..1...1
    ......................................................................................E1MARAM...1...9999
    ......................................................................................E1UPSLINK..1...1
    THIS IS MY JDBC STRUCTURE..
    I sent the screen shorts to your company email id..please check it and help me..
    i am able to get the idoc from sap r3 to Xi ,,, now i want to send that idoc to database..
    help me please.
    Kumar..
    [email protected]

  • Mapping Error in XI Configuration for MM-SUS Scenario

    Dear Experts,
    I am working on MM-SUS Classic Scenario,
    We have done all basic setting in SRM, ECC and SUS.
    Now we are configuring XI Scenario(Working on ESOA Architecture), while configuring XI Scenario, I follow the mention steps :
    I have started from Integration Builder in XI (using T-code SXMB_IFR)
    1.  I have assigned two Business System( for ECC and SUS)  In integration Builder (Creates Communication Channels Automatically) .
    2. Modify IDOC and XI Communication in ERP and SUS Business system respectively.
    3. Now select Tools -> Transer Integration Scenario from Inegration Repository and Create Scenario in it properly
        (Included Assign Services, Configure Connections, Generate etc).
    4. In last, save scenario.
    After configuration XI  I am not getting Scenario Data (Objects and Configuration Overview data) in it.
    When i  click to Check Configurability  under Model Configurator of mine Scenario,  I found following Errors ( I am Mentioning only some errors)  :
    Component View SE_Services_Procurement: Connection from Send Z_CREMAS_SUSMM to Business Partner empfangen has no mapping
    Component View SE_Services_Procurement: Connection from Send_PO_From_MM to Receive_Purchase_Order has no mapping
    Component View SE_Services_Procurement: Connection from ServiceAcknowledgementConfirmationRequest to ServiceAcknowledgementConfirmationCreate has no mapping
    Component View SE_Services_Procurement: Connection from InvoiceRequest senden to Receive INVOIC has no mapping
    Kindly correct me if am missing some, and help me out, what should have been done to remove this mapping errors.
    Thanks in advance,
    Regards,
    Pawan Keshwani

    If you are on >= SP9 you do not need to perform that action at all.
    Go to SU01 transaction assign SAP_XI_DEVELOPER role for the desired users and try it.
    regards
    Shravan

  • File to idoc ..error in sxmb_moni

    Hi Xi Friends...
    In my xml to idoc scenario...
    file is picking..but in sxmb_moni  it is showing as mapping error  like
    <b>No messages created from split mapping</b> ..
    i copied the the payload from sxmb_moni and i tested in static message mapping..its converting successfully...
    please guide me..
    regards
    ram

    refer these links;
    Split mapping created no messages - this has a solution, check if it can help you.
    Message Split without BPM - Error

  • Trigger new message, wenn SXMB_MONI Message is red (mapping-error)

    Hi everybody,
    is there any chance to trigger another message if an mapping-error occured?
    (I do not want to use BPM for the exception handling).
    We are sending IDOCs to XI, just in gthe case, that the mapping throws an error I want to send a SYSTAT-IDoc back.
    Thanks
    Regards Mario

    It would be very complicated to achive the Fault message with IDOC without BPM.
    There is one way that probably you could try,
    The SXMB_MONI contains the trace log for every message based on the steps processed in the interface.
    You caould try to add the checkpoints at these steps e.g.
    1. In Receiver determination, there is option to route the message to different receiver if the receiver system is missing in Receiver determination.
    2. Can design the Adapter module to catch the exceptions with the connectivity with Sender / Receiver systems and handle it to raise any alert notification.
    These kind of alternative ways have to be used to achive the requirments.
    Note : I am not sure how much it will be feasible for the replacement of BPM.
    Thanks
    Swarup

  • Mapping Error during BPM

    Hi Gurus,
      Im configuring a scenario to perform idoc collections using BPM.
      When im testing the scenario, the SXMB_MONI transaction is telling me that there is a mapping error. I went thru the messages in SXMB_MONI but im unable to find out where the is the mapping error. In addition, I tried to test the scenario by sending 2 idocs and but its seems that the BPM is not triggered. It seems like somehow the erroneous BPM is stuck and im unable to trigger it anymore. I created a new BPM and tested it, it got triggered but is still giving me the mapping error.
    Any advice?
    Thanks in advance.

    Hi,
    I referred to the below blog but i do not have the option for Create New Transformation under the Transformation step.
    Transactional Behavior in BPM.
    But i managed to get some information on the mapping error
    Cannot produce target element /ns0:Messages/ns0:Message1/PEXR2001/IDOC.
    Im trying to collect all the PEXR2001 idocs, i.e. im going a N to 1 mapping. I've mapped the PERX2001 element of the source to element IDOC of the target. Is this correct? I've change the source from 0 to Unbounded.
    In addition, now in SXMB_MONI, after i click on PE, im getting the following message
    Message DD8878FE218C60F1948400170853600D held at process 000000002001 but not yet processed.
    Is there any tcode i can goto to trigger this process?
    Thanks!!!

  • IDOC AAE error:IDOC_ERROR_PARSE_FAILURE

    Hello Gurus,
    I am facing following error in IDOC AAE channel scenario is SOAP to IDOC we are using Integrated configuration.I have mapped all the attributes in the IDOC to 1 and date formats are fine.On Analsys i found for the IDOC Field MENGE is not accepting Decimal values when the value 868.000 is passed  IDOC AAE is failing with following error.
    When i pass with out decimal like 868 Idoc is posting successfully.
    using connection
    File_http://sap.com/xi/XI/System failed, due to:
    com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to
    idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException
    occurred while parsing IDocXML for type :state=READING_FIELD_VALUE_TAG,
    charPosition=441, lineNumber=1, columnNumber=442" tabIndex=0
    ti="0" lsdata="{0:'Transmitting the message to endpoint using
    connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException:
    Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE:
    An IDocConversionException occurred while parsing IDocXML for type
    :\nstate=READING_FIELD_VALUE_TAG, charPosition=441, lineNumber=1,
    columnNumber=442',7:true}" ct="TV"
    bMarkedAsFocussed="true" bResetTabIndex="true"Transmitting
    the message to endpoint <local> using connection
    File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException:
    Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE:
    An IDocConversionException occurred while parsing IDocXML for type
    <Z2MAK075IDOC>:
    state=READING_FIELD_VALUE_TAG, charPosition=441, lineNumber=1, columnNumber=442
    I have explored through forum but i didnt find exact solution how decimal values can be handled in IDOC AAE .Please through some light on the issue any help is higly apprecaited.
    Regards
    Praveen Maareddy

    Hi Praveen
    Looks like it will not allow dot(.) or comma(,) .
    Check this
    A numc field will not allow you to post values like '.' or ',' to it. You need to get rid of the decimal point/comma. You can do that by multiplying the value by 100 or 1000... depending on your decimal places. Then it is possible to post that values to a numc field. A numc does allow only the numeric characters from 0 to 9. If this is not what you want (because you are dealing with an characteristic) you need to use a char infoobject or you need to use a keyfigure.
    Problem with  conversion char to numc in transference rules
    You can change the data type of MENGE like below
    result TYPE p LENGTH 8 DECIMALS 3.

  • Idoc Packaging error

    Hi to all,
    I have a File to Idoc Scenario in XI. XI consumes a XML file with multiple instances of the tag <item> and creates an IDOC for each instance of the <item> tag contained in the XML file. But, if a mapping error occurr when XI processes one of the <item> tag instances, no IDOCs are created on SAP by XI. Instead, I want XI create all IDOCs for each right <item> tag instances also when in the XML file there are some incorrect <item> tag instances.
    Thanks to all!

    Gabriele,
    As you said you will get some incorrect messages in tag items, what do you mean by this. If you knew this will happen because of the particular field why can't u filter it out used on condition.
    For example in source item tag ,let say if the element Product cost must be numeric , if its numeric then the IDOC will be posted successfully, suppose if the product cost is non-numeric then it will throw an error, this is what u mentioned as an error?
    Can u please clarify with an example
    Best regards,
    raj.

Maybe you are looking for