Mapping Error during BPM

Hi Gurus,
Im configuring a scenario to perform idoc collections using BPM.
When im testing the scenario, the SXMB_MONI transaction is telling me that there is a mapping error. I went thru the messages in SXMB_MONI but im unable to find out where the is the mapping error. In addition, I tried to test the scenario by sending 2 idocs and but its seems that the BPM is not triggered. It seems like somehow the erroneous BPM is stuck and im unable to trigger it anymore. I created a new BPM and tested it, it got triggered but is still giving me the mapping error.
Any advice?
Thanks in advance.

Hi,
I referred to the below blog but i do not have the option for Create New Transformation under the Transformation step.
Transactional Behavior in BPM.
But i managed to get some information on the mapping error
Cannot produce target element /ns0:Messages/ns0:Message1/PEXR2001/IDOC.
Im trying to collect all the PEXR2001 idocs, i.e. im going a N to 1 mapping. I've mapped the PERX2001 element of the source to element IDOC of the target. Is this correct? I've change the source from 0 to Unbounded.
In addition, now in SXMB_MONI, after i click on PE, im getting the following message
Message DD8878FE218C60F1948400170853600D held at process 000000002001 but not yet processed.
Is there any tcode i can goto to trigger this process?
Thanks!!!

Similar Messages

Mapping Errors in BPM

Hi All,
How can the mapping errors in BPM be handeld implicitly (without the use of Exception Handling Branch)
Regards,
Anurag

Hi Anurag.
Handling the mapping exceptions in BPM could be possible using the Alerts.
Go through this blog for Alert Configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
And also go through this thread:
alert in BPM
Hope this helps you.
Regards,
Hari.

Mapping error during runtime

Hi,
I have scenario like JDBC sender and file receiver.
I am able to poll with JDBC sender adapter and message has success in adapter engine.
but i am getting following error while mapping runtime.In sxmb_moni status error during mapping runtime.
Below i am giving the trace file:
<Trace level="1" type="T">Interface Mapping urn:iwaysoftware:adapter:iworacle:tablerequest jdbc_im</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_jdbc_mp_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:PO_HEADER/PO_HEADERS_INTERFACE/INTERFACE_HEADER_ID. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:303) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:63) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:77) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:94) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:67) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor414.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy153.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor413.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7650) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2275) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1614) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8009) at com.sap.mw.jco.JCO$Server.work(JCO.java:8129) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8076) at com.sap.mw.jco.JCO$Server.run(JCO.java:7992) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:PO_HEADER/PO_HEADERS_INTERFACE/INTERFACE_HEADER_ID. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:178) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:204) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:204) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:298) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:63) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:77) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:94) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:67) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor414.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy153.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor413.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7650) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2275) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1614) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8009) at com.sap.mw.jco.JCO$Server.work(JCO.java:8129) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8076) at com.sap.mw.jco.JCO$Server.run(JCO.java:7992) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</Trace>
I tried with all options using mapping functions.But the same eror is coming.
When i tested my mapping program its successfully running in map bulider without any errors.
The error occuring at runtime.
Source strcture :
<?xml version="1.0" encoding="UTF-8"?>
<ns0:resultset xmlns:ns0="urn:iwaysoftware:adapter:iworacle:tablerequest">
   <row>
      <interface_header_id>928822</interface_header_id>
   </row>
</ns0:resultset>
Target structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:PO_HEADER xmlns:ns0="urn:iwaysoftware:adapter:iworacle:tablerequest"><PO_HEADERS_INTERFACE><INTERFACE_HEADER_ID>928822</INTERFACE_HEADER_ID></PO_HEADERS_INTERFACE></ns0:PO_HEADER>
Can any body suggest what causing the problem.
Regards
Usman

Hi Usman,
Test your mapping in IR with the payload from SXMB_MONI. You can refer michal's weblog on <a href="/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios to test your mapping (in real life scenarios)</a>
In other words you copy the XML message from monitoring and exectute the mapping in Integration Builder with maximal trace to get the reason.
So what you can do is check ur runtime payload in sxmb_moni with,
IR>message mapping>test tab>give values>test-->source xml
Also i thought i will give you some details on what ur doing, so maybe you can compare it with what uhave done and see where you have gone wrong.
A JDBC sender adapter has 2 essential fields,
1. SQL Statement
2. Update Statement
Your SQL statement will contain your SELECT statement and once your SQL statement is executed, UPDATE statement is executed. This is done so that records that have been selected by the SQL statement should not be selected again as the JDBC sender adapter will poll over the database for every poll interval.
If you want to SELECT something from your Database, then you will have to go for a JDBC sender adapter.
This is how a SENDER JDBC Adapter works,
When you are using your JDBC as a sender, then your JDBC will poll over your database and select the rows that satisfy your Select Query.
In your case, as you are dealing with multiple tables, you can write a stored proceudre for your Database, and call this stored procedure in your Sender JDBC adapter in the SELECT field of your JDBC adapter.
Go through this blog for stored procedures.
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
For Configuring the Sender JDBC Adapter refer go through <a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm">Configuring the Sender JDBC Adapter</a>
Also go through this blog and see if it helps you.
/people/prasadbabu.nemalikanti3/blog/2006/02/27/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-2
To access any Database from XI, you will have to install the corresponding Driver on your XI server.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
I hope this helps...
Regards,
Abhy
Message was edited by: Abhy Thomas

Alerts on mapping error from BPM

In my BPM, when I use 'Throw Alert' via control step before transformation, it creates an Alert.
What I would like to do is to Throw Alert when there is a mapping error. And in order to do this, I created an exception block within my transformation step and inserted an exception handler. And in the exception handler, I created control step with 'Throw Alert'.
When there is a mapping error, I do not get an Alert but throws an exception.
Is there anything I'm missing.
Thank you,
Parimala

hi,
Following is the required order
1. Create a block Step BLK_TransformationExceptions.
2. In the properties of BLK_TransformationExceptions
    define an exception TransformException
3. Add Exception Branch into block step.
4. Set the exception handler to TransformException
5. Add your transformation step into block step.
6. In the properties of transformation step set the
    system exception to TransformException(your custum
    exception)
5. Move your alert login into the exception handler.
Regards,
Naveen

Message Mapping Error in BPM

when message mapping, if the length of source field is longer than specified length, I need to output these kinds of messages. what is the solution?

Hi,
        try using a user defined function written in java where u can check for the condition and raise a exception.
           if(sourcefield.length()>16)
S.O.P("The Invoice Number is greater than 16 characters");
or
   using a BPM where u can check whether Invoice number is greater than 16 characters and if it is true then raise an exception and send the message through BPM.
regards
jithesh

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Error during activation a message mapping

Hi,
I get this error during activation a message mapping:
source code has an syntax error:
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf1f9db20a78a11dac004000f1ff80130/source/com/sap/xi/tf/_Source2Target_.java:2: package com.sap.aii.mappingtool.tfapi does not exist import com.sap.aii.mapping.api.; import com.sap.aii.mappingtool.tfapi.; ^ 1 error
Can anybody help me please??
Thanks.
Regards
Stefan

Hi Michal,
I do not have deleted some libraries in the XI-Installation.
I have some customer functions in other mappings but no message mapping without or with customer function can I activate, now.
The mappings are in serveral software components but it is no chance to activate a message mapping.
Regards,
Stefan

VLD-1141: Internal error during mapping generation.

I am getting the "VLD-1141: Internal error during mapping generation" error when deploying a mapping. This mapping was previously working fine. As part of a re-factoring effort, for all the underlying tables and views, we replace 2 existing columns with a new column. All the objects were successfully re-imported and synchronized in the mapping. The mapping is using Mapping Input Parameter, Lookups, Expression Transformations, Splitter, Set Operator, Source & Target Tables. All these transformation were part of the earlier working version of the mapping.
On doing validation within the mapping, I get a success message followed by 4 warning for the Lookup Condition on key Lookup does not contain a complete unique key. Before the re-factoring effort, I was getting the same 4 warning messages, however the mapping was executing correctly.
When I do Generate within the mapping, I get the following message:
Code cannot be generated.
Click the message tab for details.
In the Design Center, when I do a validation on the mapping I get the following error:
VLD-1141: Internal error during mapping generation.
java.lang.NullPointerException
at oracle.wh.service.impl.mapping.component.Sequence.getSequenceExpressions(Sequence.java:138)
at oracle.wh.service.impl.mapping.component.Sequence.doSequenceValidation(Sequence.java:239)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:123)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext2(EntitySqlDelegate.java:97)
at oracle.wh.service.impl.mapping.component.entity.EntitySqlDelegate.prepareOutputContext(EntitySqlDelegate.java:78)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:240)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBasedInternal(PlSqlGenerationMediator.java:2108)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assembleSetBased(PlSqlGenerationMediator.java:2090)
at oracle.wh.service.impl.mapping.generation.PlSqlGenerationMediator.assemble(PlSqlGenerationMediator.java:541)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:798)
at oracle.wh.service.impl.mapping.generation.WBMappingGenerator.generate(WBMappingGenerator.java:335)
at oracle.wh.service.impl.mapping.generation.WBDeployableMappingGenerator.generate(WBDeployableMappingGenerator.java:102)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:433)
at oracle.wh.service.impl.generation.common.WBGenerationService.generateCode(WBGenerationService.java:311)
at oracle.wh.service.impl.generation.service.WhValidationGenerationTransaction.run(WhValidationGenerationTransaction.java:251)
Any help in this regards would be appreciated.
Naval

Hi,
I think your mapping is corrupted by converting two columns to one. The owb has always a problem if you change the structure of a table which is bound to a table operator. The way to avoid this is to drop the table operator after changing the table in the table editor and recreate it with the changed table definition.
Make a test: select the new attribut in the table operator and look left on the configuration window. To which table and attribute it's bound?
Regards,
Detlef

Catch mapping error message in BPM Exception branch

Hi dudes,
Does anyone know how to catch the mapping runtime error message into a BPM exception branch? I know how to create an exception branch and how to trigger it, but I wonder whether it's possible to pass the mapping error message as shown in SXI_MONITOR (i.e. 'Cannot create target element XXXXX. Values missing in queue context').
Otherwise, everytime my BPM fails I will have to take the payload and run the mapping test in order to find out the reason of the error.
Many thanks in advance!
Paco

Thanks,
My problem is not about handling exception in BPM, but getting the mapping error description and then passing it to the exception branch.
I can see in the workflow log that this info is contained into the Exception container EXCEPTIONS[2] / T100MSG:
Message Class: SAI_MAPPING
Message Number: 217
Message Type: E
Message Variable: com/sap/xi/tf/_<MM name>
Message Variable: com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti
Message Variable: on: Cannot create target element /ns1:<path/field>.Message Variable: Values~
The text in bold is the one I am interested in to be get and mapped into the exception branch.

Error during Mapping

Hello,
My XI 2.0 scenario :
Flat file => File adapter => XI => IDoc adapter => SAP 4.7
The File adapter reads the file successfully & passes to the Integration Server. In XI XML message monitor (SXMB_MONI), I'm getting the following error ...
====================
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="Error during mapping" p2="--- Creating Java mapping com.sap.xi.tf._R_MsgMap_1_ --- Using MappingResolver with context URL /sapmnt/XID/global/xi/mapping/http%3A%2F%2FABCXYZ%2Ecom%2Fxi%2FDev%2F/bc52cef0be3411d8b277cade640701c6/ --- Load of com/sap/xi/tf/_MsgMap_1_.class from /sapmnt/XID/global/xi/mapping/http%3A%2F%2FABCXYZ%2Ecom%2Fxi%2FDev%2F/bc52cef0be3411d8b277cade640701c6/ failed. --- Class not found: com.sap.xi.tf._MsgMap_1_ --- java.lang.ClassNotFoundException at RUMappingJava.load(): Could not load class: com.sap.xi.tf._MsgMap_1_ Class not found: com.sap.xi.tf._MsgMap_1_ --- com.sap.aii.ibrun.server.map.MappingRuntimeException: at com.sap.aii.ibrun.server.map.MappingRuntimeException.code_STYLESHEET_OR_CLASS_NOT_FOUND(MappingRuntimeException.java:91) at com.sap.aii.ibrun.server.map.RUMappingJava.load(RUMappingJava.java:119) at com.sap.aii.ibrun.server.map.RUMappingJava.execute(RUMappingJava.java:40) at com.sap.aii.ibrun.server.map.RURunner.run(RURunner.java:58) at com.sap.aii.ibrun.server.map.RUManager.run(RUManager.java:66) at com.sap.aii.ibrun.sbeans.map.MappingRequestHandler.handleRequest(MappingRequestHandler.java:62) at com.sap.aii.ibrun.sbeans.map.MappingServiceImpl.processFunction(MappingServiceImpl.java:72) at com.sap.aii.ibrun.sbeans.map.XMappingServiceObjectImpl0.processFunction(XMappingServiceObjectImpl0.java:24) at com.sap.aii.ibrun.sbeans.map.MappingServiceKey.processFunction(MappingServiceKey.java:10) at java.lang.reflect.Method.invoke(Native Method) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.invokeBean(RFCDefaultRequestHandler.java:73) at com.inqmy.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:47) at com.inqmy.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:69) at com.sap.mw.jco.JCO$Server.dispatchRequest(Unknown Source) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.nativeListen(Native Method) at com.sap.mw.jco.rfc.MiddlewareRFC$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.listen(Unknown Source) at com.sap.mw.jco.JCO$Server.run(Unknown Source) at java.lang.Thread.run(Thread.java:479) ---" p3="" p4="">MAPPING.GENERIC</SAP:Code>
<SAP:Text language="EN">Error during mapping</SAP:Text>
</SAP:ErrorHeader>
====================
MsgMap_1 is the Message Mapping defined - mapping the flat file structure to the IDoc structure.
Do I have to do more than just create the Message Mapping in the Integration Repository ? In the Integration Directory, the Interface Mapping (from Repository) is used.
Any help is greatly appreciated.
Regards,
Homiar.

Hi Homiar,
Need a little more detail.
The directory points to the interface mapping.
The Interface mapping points to the message mapping.
What type of message mapping are you using?
- Graphical mapping.
- XSLT.
- Java.
- Abap.
The main problem is "java.lang.ClassNotFoundException"
Do other mappings work in your system?
Jason

Mapping error in the BPM!!

Hi Fiends,
I have a BPM ..where I have the steps defined like this..
Transform -> send mail..
In the transformation ..I have a simple mapping program(source & the target structures have got one field)..
message type structures are like this..
source& target
Return key ---> 1:1
field1 --->1:1
mapping is like this :
Field1--->field1(when field1 is not empty)
If field1 is empty then -> I am sending some constant to the target ...and in the mapping it is working fine...
My mail is working perfectly when there is some value in field1..and I am getting a mail..
and when there is no value in field1..I am getting mapping error.
do you have any idea..how can I solve this issue..plz help me..
Thanks..

Raju,
Try tracing the "transformation" step in BPM. Check the instance of the message in sxmb_moni and click 'PE' so you will be in 'workflow log' here you could see the data flow of your message inside BPE. Here you can trace were your message got exception. If it is in transformation step then click on 'list tech details' (left top corner) then click on 'show container' button corresponding to that 'transformation step'. Its similar to using trace area in sxmb_moni. here you will be aware of mapping error.
Hope it will be helpfull.
Regards,
Yuva

Error during mapping service, RFC-XI-File Adapter

Hello,
I have the following problem: I am using RFC to send some data to XI and then to File Adapter, however I get a short dump with "5990 Error during mapping service in XI". Even though mappings works, I tested using the document that comes in XI in Repository without any errors.
       What does this error means and is there any way to get more detailed explanation of my error. Thank you in advance for your help,
               Dmitriy Mindich

Synchronous RFC
1. CALL FUNCTION func DESTINATION dest
                     parameter_list.
Asynchronous RFC
2. CALL FUNCTION func STARTING NEW TASK task
                [DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
                parameter_list
                [{PERFORMING subr}|{CALLING meth} ON END OF TASK].
Transactional RFC
3. CALL FUNCTION func IN BACKGROUND TASK
                     [DESTINATION dest]
                     parameter_list
                     [AS SEPARATE UNIT].
Use help function of your ABAP editor for more details.
Regards
Stefan

BPM Error during delivery of message

Hi All,
I am working on BPM Scenario, to collect the files based on Correlation Id.
Its working file in PROD, Last 2 days back we processed 20 message, 4 was not processed. Data looks good, and i am trying to process those 4 records.
I am getting the below error in SMQ2.
SysFAIL - >Permanent error in BPE inbound processing -> Display Trace: 193 385 20091008225338.6300000 DATA SWF_INB EXCEPTIONS WF-BATCH X Error during delivery of message BDAAD94EA8454FA005F1A2C9416843DC to receive processes WS90100038 XBQO$PE_WS90100038 BDAAD94EA8454FA005F1A2C9416843DC
I cleared the SMQ2 and SWWL, and reprocessed the file, still i am getting same error...
SXMB_MONI_BPE - > Continoue Process flow after error nothing is displayed...
Any cause, i am getting the error???
Thanks,
SR

Hi Siva,
Normally this error occurs when your data not sufficient,check your data its correct or not,i think its not satisying your condition / corealtion what you defined in BPM.
Regards,
Raj

OWB 11.2 internal error during mapping generation

Dear all,
Ever since switching to OWB 11.2 I have been sporadically receiving unexplicable errors during mapping deployment. It only happens when I generate more than 1 mapping simultaneously, and it appears to be completely random. One or more mappings will fail during the generation phase of the deployment with an 'internal error', after which I get the option to continue deployment of those mappings that did generate correctly. What I usually do next is trying to deploy the failed mappings again, which always works - the internal error does not reoccur. But it seems to be that this second generation does not work properly either.
For example, today I had to redeploy my entire set of mappings, due to a server change. Of the 60 mappings I had, about 5 failed with the forementioned error. (Sadly I can't include the exact error here since the job logs in the control center do not record this failure to generate, it looks like the failed mappings never were included in the job in the first place.) One of them I deployed aftewards, and found the query in the pacakge to look like:
    INSERT
    /*+ APPEND */
    INTO
      "SA_BETMD_01" "SA_BETMD_01"
      ("DEWNKNR",
      "DEBTMCE",
      "DEBTMOM",
      "DEBTMO2",
      "DEBTMO3")
      (SELECT
/*+ NO_MERGE */
/* DRBETMD_RS.INOUTGRP1 */
"DRBETMD_RS"."DEWNKNR" "DEWNKNR",
"DRBETMD_RS"."DEBTMCE" "DEBTMCE",
"DRBETMD_RS"."DEBTMOM" "DEBTMOM",
NVL("DRBETMD_RS"."DEBTMO2", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO2.OGRP.DEBTMO2: EXPRESSION */ "DEBTMO2",
NVL("DRBETMD_RS"."DEBTMO3", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO3.OGRP.DEBTMO3: EXPRESSION */ "DEBTMO3"
FROM
"SRC"."DRBETMD_RS"@"SRCDBP@SAFE_SRC_PRD_RET" "DRBETMD_RS"
    ;However, generating the preview code in OWB results in a more correct and complete version of the code:
    INSERT
    /*+ APPEND */
    INTO
      "SA_BETMD_01" "SA_BETMD_01"
      ("DEWNKNR",
      "DEBTMCE",
      "DEBTMOM",
      "DEBTMO2",
      "DEBTMO3",
      "DEBTMO4")
      (SELECT
/*+ NO_MERGE */
/* DRBETMD_RS.INOUTGRP1 */
"DRBETMD_RS"."DEWNKNR" "DEWNKNR",
"DRBETMD_RS"."DEBTMCE" "DEBTMCE",
"DRBETMD_RS"."DEBTMOM" "DEBTMOM",
NVL("DRBETMD_RS"."DEBTMO2", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO2.OGRP.DEBTMO2: EXPRESSION */ "DEBTMO2",
NVL("DRBETMD_RS"."DEBTMO3", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO3.OGRP.DEBTMO3: EXPRESSION */ "DEBTMO3",
NVL("DRBETMD_RS"."DEBTMO4", "DRBETMD_RS"."DEBTMOM")/* ATTRIBUTE NVL_BTMO4.OGRP.DEBTMO4: EXPRESSION */ "DEBTMO4"
FROM
"SRC"."DRBETMD_RS"@"SRCDBP@SAFE_DGN_PRD_RET" "DRBETMD_RS"
    ;The same goes for other packages, all of which crash due trying to insert NULL values in a mandatory column! (In case, DEBTMO4.)
Funny enough, if I generate the mapping again a bit later - without making any changes to the mapping - the code is complete and everything works properly.
Does anyone else ever had this problem? My main problem is that I can't just reproduce this problem, so I can't exactly report it as a bug and expect it to be solved...
Kind regards,
Kurt Geens

Good morning Dave,
I do mean during deployment. As you probably know all too well, the deployment of a package is split in two parts: generation of the code, and the actual deployment. The internal error occurs during that first part - the generation of code. The exact steps I went through when the error occured are the following:
1) I selected about 15 mappings, and chose to 'replace' these mappings in the database. The code was generated, with 4 mappings having the forementioned 'internal error'. After pressing the play button the deployment of the 11 remaining packages continued without problem.
2) Within the same session, I selected the 4 failed mappings, and chose to 'replace' these again. The generation and deployment was succesful - no internal errors occured.
3) I exited OWB and started a daily workflow process. One of the mappings that had an internal error in step 1 crashed with a 'cannot insert null into' error.
4) I restarted OWB, opened the mapping, chose to generate the code, and compared the generation result with the package code in the database. This resulted in the difference mentioned in my original mail.
5) I deployed (replace) the mapping once more, and verified the code in the database. This time the code was complete (no missing column).
Regards,
Kurt

BPM Mapping Error using JDBC adapter JDBC - SAP - JDBC

Hi
I am facing an issue in XI BPM in my QA system .
My scenario involves a JDBC sender adapter which calls an SQL in the legacy database , a BPM which process the SQL resultset and IDoc send from BPM to R/3.Once IDoc is send successfully to R/3 XI BPM sends a response back to legacy database.
There are 4 mapping transforations inside BPM.
First XI executes an SQL in the database and then transforms it using BPM steps.
I have not made any changes in the mapping or within BPM.
However since last week the BPM is failing . When I checked the error log I found out the error due to mapping transformation in one of the steps.
In fact XI fails to successfully map in that step.
The same BPM and mapping works fine in the Production system.
However when I manually tried to test the BPM and the mappings with Production payload in XI QA system it again failed.
I believe the message is failing not due to data problem.
I also tried by deactivating and reactivating the XI sender channel which calls the SQL in the database.
Then I tried by restarting all backgrounds jobs related to BPM.
Both apprpoaches failed.
I am getting the following error in transformation step.
<b>com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRuntimeException in Message-Mapping transformatio~</b>.
Any inputs will be very helpful and rewarded.
Thanks in advance.

Please provide more detailed exception trace.
Also, I have seen some cases where the imported/deployed classes simply disapeared!!!
I had to make dummy changes in all my message mappings and activate them in order to get them working.
Regards,
Henrique

Mapping Error during BPM

Similar Messages

Maybe you are looking for