Idoc Packaging error

Hi to all,
I have a File to Idoc Scenario in XI. XI consumes a XML file with multiple instances of the tag <item> and creates an IDOC for each instance of the <item> tag contained in the XML file. But, if a mapping error occurr when XI processes one of the <item> tag instances, no IDOCs are created on SAP by XI. Instead, I want XI create all IDOCs for each right <item> tag instances also when in the XML file there are some incorrect <item> tag instances.
Thanks to all!

Gabriele,
As you said you will get some incorrect messages in tag items, what do you mean by this. If you knew this will happen because of the particular field why can't u filter it out used on condition.
For example in source item tag ,let say if the element Product cost must be numeric , if its numeric then the IDOC will be posted successfully, suppose if the product cost is non-numeric then it will throw an error, this is what u mentioned as an error?
Can u please clarify with an example
Best regards,
raj.

Similar Messages

  • IDOCs Packaging ... What if one IDOC is in error in the packet ?

    Hi all,
    What will happend to the rest of the IDOC in the packet ?
    Lets say, i packaged my IDOC in a bunch of 5.  The first 3 IDOCs, their payload are ok. However the 4th has a bad payload and it crash in the mapping section ...
    Does the first 3 IDOC (and the 5th one) will be sent and the one in error (4th one) will remain (in XI for mapping error) ?
    Thank.
    michel osborne

    Hi chandrakanth.k,
    Thank for your response. I have seen these blogs. I am not using the BPM.
    I am using the IDXPW + Messages filter (sxmsfilter) to packaged the IDOCs.
    I have made some tests ... wird enough ...
    test #1:
    idoc (1) - error
    idoc (2) - valid
    idoc (3) - valid
    .... etc ...
    test #2:
    idoc (1) - valid
    idoc (2) - error
    idoc (3) - valid
    test #3:
    idoc (1) – valid
    idoc (2) – valid
    idoc (3) - valid
    idoc (4) - error
    In the "test #1", idoc (2) & idoc (3) are processed correctly (idoc sent to the SAP ECC backend system). Idoc (1) is stuck in XI with errror (mapping) which is OK.
    In the "test #2", work the same as in “test #1”, idoc(1) & idoc(3) hs been delivered to the SAP ECC backend system.
    However, in the "test #3"all idoc (1, 2, 3,4) are stuck in XI ... idoc(4) in error (which is ok), idoc(1) – up to -  idoc(3) in sxmb_moni has the racing flag .... but not delivered to the SAP ECC backend system ... they have the status: Message Schedule for outbound side ....
    It seem that each time the package end with and idoc in error, the entire “batch’ get stuck in XI ….
    How can i get sent them (test case #3) !!?!?
    Thank in advance !

  • IDOC Package / idxpw error

    Hi Guys,
    I am trying to make the configuration for IDOC Package on XI, I put the MSGID and I got the Sender ID, Receiver ID and all the information but when I execute the transaction I got this error:
    Error in Insert Filter:: Message categories in filter and sender/receiver I
    do you know how to solve it?
    thanks
    Omar Hernandez

    Hi,
    Reffer this Blog
    XI:Idoc Message Packages
    REgards
    Seshagiri

  • IDoc Package from XI to R/3

    Hello,
    Is it possible to send an IDoc package from XI to R/3?
    I saw the following some time back in a tuning guide (Feb 2005):
    "In SP11, a solution will be available for IDoc adapter outbound processing to collect IDoc-XML messages and transfer them as an IDoc package, as in the traditional IDoc world. The IDoc adapter is designed to be able to process IDoc-XML structures that represent IDoc packages. This enables IDoc-XML packages to be generated during mapping if the inbound data structure of a message already includes the package data. This structure can then be processed by the outbound IDoc adapter and sent as an IDoc package to the receiver application."
    Does anyone know if this got released?  Where is this set up in XI?  Tuning, IDoc adapter, mapping, BPM?
    What is meant by "... if the inbound data structure of a message already includes the package data"?  Is there a setting in the data type for this?
    Thanks,
    Lisa

    Alexander,
    If the data has gone out of XI successfully and IDOC has been recieved by R/3, you cannot track the same in XI.
    In R/3, you can look at the list of IDOCS using WE02 transaction. Please take a look at the status of the IDOC and it should tell you what could be the error.
    Regards
    Ravi

  • Issues in IDoc Sender Scenario:IDoc  with errors added

    Hi all
             Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
    status 56 : External segment name E2KOMG003 cannot be interpreted
    status 60 : Basic IDoc type COND_A03 could not be found.
    And the segments displayed in data record  are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
    Would any one help in resolving the issue.
    Thanks,
    Chilanka

    Hi,
    >>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
    no you cannot create any partner profiles in XI
    for more about IDOC configuration in XI check :
    <a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • PI 711 Installation: Loading of 'SAPNTAB' import package: error but no log

    Hello,
    I'm perfromong an installation of a SAP PI 7.11 ystem on windoows Server 2003 and Oracle 10.2 .
    I've perfromed the installation of the DEV system without particular issue.
    But now when tryning to install the QAS system , I can't finish the installation : Im' stuck in the import ABAP step ...
    It is impossible to import the 'SAPNTAB' package. I couln't find the reason.
    I've tried updating the R3load binary, rebooting the server, restarting the instalaltion from scratch but it didn't help.
    Here I provide you the logs, maybe you can help me
    SAPNTAB.log
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110223195542
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
    Compiled Dec 14 2010 22:52:23
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: SVERS deleted/truncated #20110223195543
    sapinst_dev.log
    Syslib info about system call. OS message 109 (The pipe has been ended.
    ) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
    WARNING    2011-02-23 19:56:12.607
               CJSlibModule::writeWarning_impl()
    Execution of the command ""C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\sapjvm\sapjvm_5\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
    java version "1.5.0_14"
    Java(TM) 2 Runtime Environment, Standard Edition (build 5.1.024)
    SAP Java 64-Bit Server VM (build 5.1.024, Sep  4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode))
    Import Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29.
    Loading of 'SAPNTAB' import package: ERROR
    Import Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29.
    TRACE      2011-02-23 19:56:12.607
    Function setMessageIdOfExceptionMessage: nw.programError
    ERROR      2011-02-23 19:56:12.607
               CJSlibModule::writeError_impl()
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    import_monitor.log
    TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is started.
    INFO: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is successfully completed.
    Primary key creation: after load.
    Index creation: after load.
    INFO: 2011-02-23 19:55:42
    Data codepage 1100 is determined using TOC file 'E:\SAPCD\51036706\DATA_UNITS\EXP1\DATA\REPOSRC.TOC' for package 'REPOSRC'.
    INFO: 2011-02-23 19:55:42
    Version table 'SVERS' is found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
    INFO: 2011-02-23 19:55:42
    Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
    TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPNTAB' import package is started.
    TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPNTAB' import package into database:
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
    ERROR: 2011-02-23 19:55:45 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPNTAB' import package is interrupted with R3load error.
    Process 'E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast' exited with return code -1,073,741,819.
    For mode details see 'SAPNTAB.log' file.
    Standard error output:
    sapparam: sapargv(argc, argv) has not been called!
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    WARNING: 2011-02-23 19:56:12
    Cannot continue import because not all import packages with data conversion tables are loaded successfully.
    WARNING: 2011-02-23 19:56:12
    1 error(s) during processing of packages.
    INFO: 2011-02-23 19:56:12
    Import Monitor is stopped.
    Edited by: Raoul Shiro on Feb 23, 2011 8:11 PM
    Edited by: Raoul Shiro on Feb 23, 2011 8:12 PM

    Hello,
    Thank you for your answer.
    I already opened a sap cutomer call, they answered that it it not a database issue,
    I restarted the installationfriom scracth , but i still got the same error :
    Here is the full content of the file SAPNTAB.log
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
    Compiled Dec 22 2008 00:13:12
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL SAPNTAB.TSK ORA -l SAPNTAB.log
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: job completed
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110225170643
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
    Compiled Dec 22 2008 00:13:12
    E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: SVERS created #20110225170643
    Regards.
    Raoul

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

    Hi
    We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
    Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
    Any help in this regard is highly appreciated.
    Thanks
    Pandiri

    User Exit activation and fixing the issue in user exit fixed this issue.

  • Call to Driver Package Error - Nine Possible Solutions that have Resolved this Issue!

    Hello everyone I've decided to write up this guide to discuss and troubleshoot the “Call to Driver Package Error”.
    What is it ? What causes it?
    This issue normally occurs when a specific driver, that is being called, cannot be called. Sometimes, a 1627 or 1603 error is referenced in the error.
         - If a 1603 error is referenced, this indicates that an ERROR_INSTALL_FAILURE has occurred, meaning a component of the installation failed. This is normally accompanied when another form of installation occurs.
         - If a 1627 error is referenced, this indicates that an ERROR_FUNCTION_FAILURE has occurred, meaning a function at a specific moment has failed, and the installation cannot continue.
    Typically, these numbers do not mean a whole lot. However, for an advanced user, these numbers might mean a little bit more.
    An example?
    "Call to driver package install returned the error 1603 for Pkg C:/ProgramFiles\HP\HP officejet pro 8600\driverstore\ng scan driver\HPWia_OJ8600.INF"
    This is the most recent error message I've witnessed. If you break it down, you will notice that “HPWia_OJ8600.INF” is the installation file (INF) that has failed. WIA (Windows Image Acquisition) is crucial for scanning, and the printer installs this file to enable scanning features.
    How can you troubleshoot this error?
    This is the main portion of the post. I am going to suggest a significant list of troubleshooting that you can attempt. There are nine solutions which have resolved the issue in different situations, all of which I personally worked with. I'm hoping that these solutions will work for you if you have to face this error.
    *Please note that some of this troubleshooting is a little complicated. If a mistake is made, you may have to reinstall the operating system. However, the final troubleshooting step will require you to do this. You should make sure all of your data is backed up before troubleshooting.
    Backing Up Your Files (Windows 8)
    Backing Up Your Files (Windows 7)
    How to Back Up Your Files (Windows Vista or XP)
    You should also backup the Registry. There are some Registry-editing steps in the troubleshooting I provide.
    Backing Up, Editing, and Restoring the Windows Registry (Windows 8)
    Backing Up, Editing, and Restoring the Windows Registry (Windows 7)
    Backing Up, Editing, and Restoring the Windows Registry (Windows 98, ME, and XP)
    *After each step is attempted, you can try installing the printer software. If it fails, please uninstall the software before proceeding. This HP document will explain how to do it:
    1. The first step is performing a Clean Boot. I've resolved this issue in the past by performing this simple step before installing the software. A Clean Boot will turn off third-party programs and services that could be blocking the software from working correctly. For more information on how to do this, please look at this Microsoft document:
    How to perform a clean boot in Windows
    2. Next, make sure the Windows Installer it turned on and started. If it not, the installation may not complete. To do this, hold down the “Windows” and “R” key on the keyboard, which will open the Run box. In that box, type “services.msc” (without the quotes) and hit Enter.
    Now scroll down to the Windows Installer. If it is checked stopped, or not started, right-click on it and select “Start”.
    3. Next, I would suggest completing all Windows Updates:
    a) Open "Windows Update" in Control Panel.
    b) Click "Settings", and then click "Install optional updates".
    c) Next, click "Check for updates".
    This will ensure that all updates are found and installed. Once they are installed, see whether or not the error returns.
    4. If the issue is not resolved at this point, I would like to check the system for obvious corruption with an SFC scan. SFC stands for System File Checker, and it scans and attempts to restore corrupted Windows files.
    To do this, open Command Prompt as Administrator. Type in this command and hit Enter afterward: sfc
    /scannow
    Write down the results and restart computer after this completes.
    5. Creating a new Administrator account is a workaround to the issue. If the error does not appear on other accounts, this proves that whatever is causing the error is account-exclusive. I'm going to suggest you unlock the computer's built-in Administrator account.
    To do this, open Command Prompt as Administrator, again. Then type in this command and hit Enter afterward: net user administrator /active:yes
    6. The next step involves editing permissions in the Registry. In the Registry, please review the instructions below to apply full permissions to the following key: HKEY_LOCAL_MACHINE
    a) Right-click on the key that you need to edit and/or delete (HKEY_LOCAL_MACHINE). Click on "permissions..."
    b) Click "Add" in that Window that appears.
    c) There will be an empty box under "Enter the object names to select". Type "Administrator" (without the quotes), then click on "Check Names".
    d) An Administrator name will appear, click "Ok" when it does.
    e) You should be able to select (click) the Administrator profile under "Group or user names". Once clicked, click on "Advanced".
    f) Click on the "Owner" tab.
    g) Click on the Administrator profile, then put the check-mark in "Replace owner on subcontainers and objects".
    h) Go back to the "Permissions" tab, and ensure the Administrator profile is selected.
    i) In the "Permissions" tab, put a check-mark in every box available. The boxes will likely be indicated by "Include inheritable permissions from this object's parent" and "Replace all child object permissions with inheritable permissions from this object".
    j) Next, click "Edit". Put a check-mark in "Full Control" under Allow. Click Ok. Now, click Apply (you may receive a Window security message, just click "Yes"), then Ok.
    k) Exit the Registry, then restart the computer, and launch the Administrator account.
    7. The next step is to re-register the Windows Installer, and other dynamic library links (.DLL). Doing this will reference certain components that are required to complete the installation. Open Command Prompt as Administrator, then type each command and hit Enter after each one:
    MSIEXEC /UNREGISTER
    MSIEXEC /REGSERVER
    REGSVR32 MSI.DLL
    REGSVR32 ATL.DLL
    REGSVR32 SOFTPUB.DLL
    REGSVR32 WINTRUST.DLL
    REGSVR32 INITPKI.DLL
    REGSVR32 DSSENH.DLL
    REGSVR32 RSAENH.DLL
    REGSVR32 GPKCSP.DLL
    REGSVR32 SCCBASE.DLL
    REGSVR32 SLBCSP.DLL
    REGSVR32 MSSIP32.DLL
    REGSVR32 CRYPTDLG.DLL
    8. There are certain DLL files that can interfere with the installation, and they should be deleted. Go to C:\Windows\System32
    Delete the following files:
    HPZipm12.dll
    HPZinw12.dll
    9. Before reinstalling the operating system, you can try restoring it. This will allow you to return the computer to a point where the printer was working.
    *You should only do this if the software worked in the recent past.
    What is System Restore? - For Windows 7 and Vista
    How to refresh, reset, or restore your PC - For Windows 8 and 8.1
    What if these nine solutions do not work?
    Finally, you will need to reinstall the operating system if the issue is not resolved by this point. However, I can promise that this will resolve the issue. Here is a generic document on reinstalling the operating system:
    Overview of Recovering the OS or Reinstalling the Operating System
    And that's everything. Thanks for reading! - Mario
    I worked on behalf of HP.

    No error messages are given. It will either freeze while saying "Accessing iTunes Store," or without saying anything at all.
    I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

    The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

    There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks.  You might want to do a search on that topic and see if anyone has a solution.  There have been various versions of the problem but a lot related to errors in the download package or failure to download.

  • IDoc Packaging in IDoc 2 IDoc Scenario

    Hi every one,
    Can anyone please throw some light on the following:
    Use of Idoc packaging in an Idoc2Idoc scenario. I dont have any clue about this.
    Reg,

    This should be rather straight forward, if you are using XI to pass IDocs from system to system then you actually don't really have to do any mapping.  There are some other good discussions on this topic:
    idoc to idoc
    IDOC packaging
    Re: IDOC to IDOC Scenario
    This is a good document on the topic:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
    You can import the IDoc data types and go about creating the rest of your scenario, usnig the IDoc adapters and ALE
    I would definitely also check out this document on configuring the IDoc adapter:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098

  • Status 56 -  IDOC with errors added

    Hi everyone,
            I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 -  IDOC with errors added "<b>EDI: Partner Profile not available</b>".
            but i had already created Partner profile in WE20.
    Regards,
    Varun Reddy.K

    Hi Varun,
                   The below link will help u in solving u r problem
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
    Just try follow the steps followed in above mentioned link
    And also check u r RFC connection in TC "SM59".
    Reward with ponits if helpful
    Regards
    Sai Ganesh

  • Error in Receiver - IDoc with errors added

    Hi All,
    I am getting error in 56 - IDoc with errors added in receiver System.
    I am new in Idoc - please tell me How to resolve this issue..
    Thanks in advance..

    Hi all thanks for reply .
    All are the help full answer ,
    I use T-code WE19 and change partner profile and execute now it is fine.
    But i have checked all configuration regard partner profile from T-code WE20 it looking everything is fine but in Test tool for Idoc Processing by t-code WE19 i have checked it will taken wrong partner profile detail after giving correct manually now it is working fine.

  • Disk Utility - No valid packages error

    I've deleted the contents of my /library/receipts/ folder and now I cannot repair permissions using Disk Utility. It now spits out a "No valid packages" error and cannot proceed. I never thought these .pkgs were important to Disk Utility.
    Is there any way to make this work again? Will the removal of these packages affect the performance of the OS?
    Thanks.
    PowerMac G5 Uni 1.8   Mac OS X (10.4.4)   2GB RAM, ATI Radeon 9800 Pro SE

    I believe you'll also need Essentials.pkg.

  • URGENT- IDoc Packaging - Que- Michal blog

    Hi,
    I was following Micahl's blog - for idoc packaging -
    /people/michal.krawczyk2/blog/2007/12/02/xipi-sender-idoc-adapter-packaging
    But there is another blog, which also by Michal.
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change ,
    which is also mentioned in OSS note: Note 814393 - Multiple IDoc instances in an XI message.
    Do I need to do both of them to achieve the Idoc Packaging.
    I also noticed that in the first blog, it is about pushing Idocs out of R/3 system and in the second blog it is the other way round.
    Can any one please clarify.
    reg

    with the first blog, how does sxmb_moni screen looks like - R3 system, XI. On XI it should not make any diff as XI is still splitting the packages.
    Yes you are right...On R3 system, if packaging is done, then you will find all IDOCs as single message. As you said on XI it will not make any difference.
    With the 2nd blog, XI would show single message for each package, but with more instances of the Idoc payload. (As shown in the first blog - look at the 2nd pic). Which means that you saving the queues but the payload size is more here in this case.
    Yes..It show single message with more instance of IDOCs. You are right about saving the queues and payload size is also more

Maybe you are looking for

  • IDES Installation error (RFC connection error)

    Hi Would someone help me? I have a problem while installing the IDES ,ECC 6.0 with MaxDB. (Linux) The installaiton of CI is holding in the phase " Checking the DDIC password "  and it seems a loop. Looking through sapinst.log ,  there is some message

  • Fake aiff and real aiff from wav ?

    1) When in garageband if I just batch convert an entire folder of wav to aiff with Apple loop utility even if all the wav loops have different tempo and key all will have one meta data or information which will not hold true for all loops.....so isnt

  • Path to XML form builder reports in Portal

    Hi Experts, I am facing one issue. We have few XML forms builder screens in Portal. Those were appearing fine but now one of them is not appearing properly. Please let me know under KM , where these reports are stored so that I can check whether thes

  • Compatibility of ColdFusion MX7 with Vista OS

    Hi all, We are using Cold Fusion MX7 and are planning to make an Operating System move from Windows XP to Vista OS and IE7. This move is only for the client machines. There are no changes to the servers. Can anyone please let me know how compatible C

  • Computational Ability to Handle Super Big Excel Files

    My son lives overseas and is in the business consultancy business. He will be visiting us in the USA next week and plans to buy an iphone (if there are any available). He is a committed PC user but is getting frustrated with the computational slownes