Idoc segment version in idoc type

hi,
we have just upgraded our R/3 system from 4.6c to SAP ECC 6.0. We then tried to send idocs to SAP XI 3.0 SP 20. However the idocs failed due to wrong segment version of idoc. It did not match the loaded metadata in XI. I know that in WE20 you can control the segment version used to send to XI. In the communication channel in XI you can also set the segment version.
So my question is: Is the correct way to handle sytems requiring diffenrent verions to import the newest metadat in idx2 and then control the versions asper the above paragraph?
Any comments are apreciated.
kr Rasmus

Hi,
for sending IDocs to XI no adapter is necessary. It should be enough to reload the metadata in idx2:
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm
Regards
Patrick

Similar Messages

IDoc segment version issue in ECC upgrade from 5.0 to 6.0

Hi experts,
we are in the process of upgrading our ECC environment from 5.0 to 6.0. We have quite a few interfaces which use ORDERS/Invoice Idocs in customised form. In ECC5.0 environment, we had developed a Z segment in the ORDERS Idoc and the segment release was set as 640. Everything worked fine in ECC5.0.
In upgraded environment, SAP has released new version of some segments. one of those is E1EDP01. This segment has 2 new versions in ECC6.0 environment - 007 and 008. This change in the version changes the data in the IDoc and hence interface goes in error at the EDI provider.
We have tried to use 640 as the IDoc segment release in the partner profile of the IDocs. This still gives us an issue because the 007 version of the segment E1EDP01 has release 620 and hence the Idoc picks up 007 version instead of 006 version as desired. When we change the partner profile with Segment release in the IDoc type as 46C, it gives us an issue in the Z segment saying that the IDoc segment is not released in 46C and the Idoc goes in error.
has any one faces such situation in the past? if yes, please throw some light.
Thanks in advance.

Please let me know if your issue was resolved. I have similar issue now.
Thanks,
Sailaja

How to see Segment Version in IDoc

Hi,
is there any way to see the Segment Version in an IDoc ?
We had the problem that an old version(Segment) was entered in the WE20(receiverdetermination) and we havent known this.
any ideas ?
Gordon

hi Michael,
that is not the thing i wanted.
If you have the newest version in WE31 but you have entered an old release in WE20 outbound parameters. The idoc is filled with the old segment version.
I only want to see the segment version in the outgoing idoc ?
IS there a way to see that ?
I have changed the release in we20 and after that the newest segment version was taken the idoc was ok!
Gordon.
Message was edited by: Gordon Breuer

IDOC Segment Version

Hi,
My requirement is that I need to post an IDOC with segment version 3.1H.
I have imported metadata for 6.40 ( I have no choice of picking up the Segment Version while importing in IDX2). I configured receiver IDOC Adapter with Segment Version option set to 31H.
Now I run in to error at runtime
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
Obligatory Node E1EDK01 not present.
I have already tried to re-import the metadata.
I ran the report IDX_CHECK_METADATA to check for any inconsistencies. There are none.
Any clues what is going wrong here?
FYI, the integration runs find if I remove the 31H from the Segment Version in the IDOC Adapter.

hi,
please try to remove metadata and afterwards send message
regards,
wojtek

Any FM/methods to update idoc segments without changing idoc status

Hi All,
My requirement is a reprocessor program which fills up some fields in the idoc segment before posting. So, after updating the segments, the idoc status should remain as before.
Is there any function modules or methods to update idoc fields in segments without changing the idoc status?
I have tried the FMs EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENT and EDI_DOCUMENT_CLOSE_EDIT, but it changes the idoc status.
Thanks,
Arun Mohan

As for FM to do this, i don't know if there are any, but i think you can go directly to the tables with the IDOC data and change them without triggering the changes in status like FM do. Still, i am not sure this is completely true, but you could give it a try. Also, i don't know if this is the best way to do it, because of those legal/audit questions mentioned by Thomas.
Here is a sample code of a program we have to change a field in a segment of WPUUMS.
*& Report YRE00021INTPG
REPORT yre00021reppg.
TABLES: edid4 ,
        edidc ,
        mean .
* Variaveis Auxiliares
DATA: t_edidc TYPE edidc OCCURS 0 WITH HEADER LINE.
DATA: t_edid4 LIKE edid4 OCCURS 0 WITH HEADER LINE .
DATA: BEGIN OF t_docs OCCURS 0,
        docnum LIKE edidc-docnum ,
      END OF t_docs.
DATA: wa_e1wpu02 LIKE e1wpu02 .
DATA: wa_e1wpu03 LIKE e1wpu03 .
DATA: t_itedidd LIKE edi_dd40 OCCURS 0 WITH HEADER LINE ,
      t_itedidc LIKE edi_dc40 OCCURS 0 WITH HEADER LINE ,
      fw_itedidc LIKE edi_dc40 ,
      fw_itedidd LIKE edi_dc40 .
DATA: l_matnr TYPE mara-matnr,
      l_tam TYPE i.
DATA: l_idoc_number TYPE edidc-docnum.
* Ecran de selecção
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_docnum FOR edid4-docnum ,
                s_credat FOR edidc-credat DEFAULT sy-datum ,
                s_cretim FOR edidc-cretim .
PARAMETER:      p_mestyp LIKE edidc-mestyp DEFAULT 'WPUUMS' ,
                p_status LIKE edidc-status DEFAULT '51' .
*SELECTION-SCREEN SKIP.
*PARAMETER:      p_ean11 TYPE mean-ean11.
SELECTION-SCREEN : END OF BLOCK b1.
AT SELECTION-SCREEN.
IF p_status <> '51'.
    MESSAGE e001(yre) WITH 'Apenas pode modificar IDOCS com erro'.
ENDIF.
IF p_mestyp <> 'WPUUMS'.
    MESSAGE e001(yre) WITH 'Apenas pode lançar WPUUMS'.
ENDIF.
*AT SELECTION-SCREEN ON p_ean11.
* SELECT SINGLE * FROM mean WHERE
*    ean11 = p_ean11.
* IF sy-subrc <> 0.
*    MESSAGE e001(yre) WITH 'Ean não existente'.
* ENDIF.
START-OF-SELECTION.
SELECT docnum INTO TABLE t_docs FROM edidc
                     WHERE status = p_status
                     AND   mestyp = p_mestyp
                     AND   docnum IN s_docnum
                     AND   credat IN s_credat
                     AND   cretim IN s_cretim .
CHECK sy-subrc = 0 .
LOOP AT t_docs.
    CLEAR : wa_e1wpu02.
    SELECT * FROM edidc INTO TABLE t_edidc
      WHERE docnum = t_docs-docnum.
    CHECK sy-subrc = 0.
    SELECT * FROM edid4 INTO TABLE t_edid4
                  WHERE docnum = t_docs-docnum AND
                        segnam = 'E1WPU02'.
    CHECK sy-subrc = 0.
    SORT t_edid4 BY segnum.
    LOOP AT t_edid4 .
      wa_e1wpu02 = t_edid4-sdata.
      WRITE wa_e1wpu02-artnr TO l_matnr NO-ZERO.
      CONDENSE l_matnr.
*      l_tam = STRLEN( l_matnr ).
*      IF l_tam <= 6.
        SELECT SINGLE ean11 INTO wa_e1wpu02-artnr FROM ytre00004 WHERE
          codcurto = l_matnr.
        IF sy-subrc = 0.
          WRITE : /1 'Código ', l_matnr, ' alterado para ', wa_e1wpu02-artnr.
        ELSE.
          WRITE : /1 'Código ', l_matnr, ' não encontrado na tabela de conversão'.
          CONTINUE.
        ENDIF.
*        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
*          EXPORTING
*            input = p_ean11
*          IMPORTING
*            output = wa_e1wpu02-artnr.
*      ENDIF.
      UPDATE edid4 SET   sdata   = wa_e1wpu02
                   WHERE docnum = t_edid4-docnum
                   AND   counter = t_edid4-counter
                   AND   segnum = t_edid4-segnum .
      IF sy-subrc <> 0 .
        ROLLBACK WORK .
        WRITE: / t_edid4-docnum .
      ELSE.
        COMMIT WORK.
      ENDIF.
    ENDLOOP.
ENDLOOP.
END-OF-SELECTION.

IDOC-Segment Created a idoc document against Billing document

Dear All,
Thanks in advance.
Already created a idoc document against Billing document and one of the IDOC segment is not in the IDOC document output segments(WE05) actually it missed the segment.
so i want to add the segment which it was missed during generation of IDOC document against billing document.
Example:
a) IDOC document misses one segment let suppose "Seg1".
b) In "Seg1" it have only one field let suppose "Field1".
c) But "Field1" does not have any value while generation of IDOC document so it doesn't create the respective segment in IDOC document.
d) so here, i want to edit the IDOC document to add the "Seg1" in the IDOC document and reprocessing the IDOC document.
Please help on this issue.
Regards,
Sridhar.

Hello,
          If your requirement is to have the Segment even with only 1 Field, you'll have to create an Idoc Extension in WE30.
         In order to populate the Custom Segment, Use the Customer Function '002' in the IDOC_OUTPUT_INVOIC which is EXIT_SAPLVEDF_002 where you can actually insert the Segment as a Child Segment of an Appropriate Segment.
        You can go for Custom segment with the IDoc Extension so that you dont have to manually insert the Segment again and again while reprocessing it.
Thanks and Regards,
Venkat Phani Prasad Konduri

How to insert the standard idoc segment in the idoc

Hi Experts!
We are using SRM 7.0.Wo got a requirement as below:
In our organiation there will be both regular employees and the non-employees.For non-employees address will not be maintained in Tcode PA20 in backend ECC HR system.Where as for employees address will be maintained.
As the HR replication will be done by scheduled jobs, in case of non employees replication is not happening due to the missing address in PA20.In order to avoid this we are building some logic and as part of it we need to add the standard IDOC segment 'E1P0006' in the main idoc as this particular segment is for address and it is missing due to the missing address in PA20 for non-employees where as this idoc segment will be there for employees.
As am very much new to idoc concept can some one help me how to handle this if any one of you came across this kind of scenario.
Please find the attached document for the idoc seq we have.
Thanks in advance.
Regards,
Kalyani

1. Open the form
2. Choose Tools--> Diagnostics
3. In the block field choose $DESCRIPTIVE_FLEXFIELD$
4. Field will show the list of all the DFF's enabled for that form.
5. Choosing one will display the name of the DFF in the value field.
Thanks
Nagamohan

Idoc segment for shpmnt notification for idoc type shpmnt02

Hi gurus,
I have to find the idoc segment for shipment notification,idoc type which we are going to use is shpmnt02 or shpmnt01,Can any one of you please tell me the idoc segments for this idoc type with fields and table name?.Thanks in advance.

Hi Nagarathinam
You can use transaction WE60 for documentation on IDOCs
Best regards,
Chris

How to assign idoc segment at runtime ??

Hi ,
I have a ztable which is maintained via sm30.
The field1 is a key field and other fields are idocsegment name , idoc field , field value .
Field1 = key field
idoc segment name (field2)
idoc field (field3)
field value(field4)
How do i update idoc segment and particular field with field4 at runtime .
segment name , field and value changes with the matching key field.
loop at it_edidd into wa_edidd
   where segnam = wa_ztable-idoc_segment.
wa_seg = wa_edidd-sdata.
how to assign the field at runtime ?????????????????????????
how to change the value of field ?????????????????????????
   update edid4 set   sdata = wa_seg
                      where docnum = wa_edidd-docnum
                      and   segnum = wa_edidd-segnum
                      and   segnam = wa_edidd-segnam.
   if sy-subrc <> 0 .
     rollback work .
     write: / wa_edidd-docnum .
   else.
     commit work.
   endif.
endloop.
Please help me with the above code .
Regards,
Rachel

Hello Rachel
You could do this the following way:
DATA: ls_edidd    TYPE edidd,
           ld_idx         TYPE i.
FIELD-SYMBOLS:
<ls_segment>         TYPE any,
<ld_field>                TYPE any.
LOOP AT it_edidd INTO ls_eddid
                             WHERE ( segnam = wa_ztable-idoc_segment ).
ld_idx = syst-tabix.
ASSIGN ls_edidd-sdata TO <ls_segment> CASTING TYPE (ls_edidd-segnam). " <<<
ASSIGN COMPONENT wa_ztable-field3 OF STRUCTURE <ls_segment>
                                  TO <ld_field>.
<ld_field> = wa_ztable-field4.
MODIFY it_edidd FROM ls_edidd INDEX ld_idx.
ENDLOOP.
However, be aware that your logic might fail in case of repetitive segments.
Regards
Uwe

Populating the custom segments for the Basic type attached to HRMD_A (IDOC)

Hi,
I've enhanced a few infotypes and want the new fields to be available in an IDOC created through the program RHALEINI.
Here are the steps I followed.
Step 1 :(we31)
We created new segment Z1IT023 , containing all the fields from infotype 0023 along with the custom fields added.
Step 2 :(we30)
We created an extension of IDOC type HRMD_A07 by name HRMD_EX to include this segement.
Step 3 :
We added an entry in table EDIMSG against message type HRMD_A , with base type : HRMD_A07 , extension : HRMD_EX , version : 700
Step4 :(we20)
Now , we made changes to partner profile by adding entry for message type HRMD_A with base IDOC type as HRMD_A07 and extension as HRMD_EX
Step5:
We changed the entry in table T777D and specified the IDOC segment as Z1IT023.
Step6.
We then tried to execute the report RHALEINI to generate the IDOC. The IDOC got created, but it didn't have the data for the segment Z1IT023.
In fact, there is a different solution to this... by adding the custom segment(containing nly the new infotype fields) as a child of the original segment E1P0023 and then writting code in the user-exit to populate the segment, but our intension is to have a single segment with all the infotype 0023 data. Besides, I believe in HR, making an entry in T777D should free us from writing any code for populating the IDOC segments.
Can anybody please suggest me, where am I going wrong. How can the new segments be populated automatically.
Thanks in advance.
Sujit.
Responses will be suitably rewarded.

Hi,
Did u get any exit to populate the custom segment?
Thanks,
San

IDOCS: Segment Definition and Segment Type

Hi Gurus,
We are working on IDOCs and trying to send a Location Master IDOCs to Third party system.
1. In the IDOC print preview we are in a position to see the IDOC segment type Ex: E1TPLOC but customer is asking for Segment definition E2TPLOC.
When we go through the documentation:
u2022     Segment Type consists of Segment definition with Version and Release.
u2022     Segment Definition will contain the Field names
u2022     E1TPLOC, E1TPDLH, E1KNVAM, E1TPTRM & E1TPSHH Segment types with concerned Segment definitions are
                     E2TPLOC,E2TPDLH, E2KNVAM
How to see the Segment definition types?

Hi,
You can see the documentation in the transaction WE60 by giving the IDOC Basic type and extension if you have any.
E1 and E2 are the same, when you see the definition of the segment the naming convention will be E2 and when populating the data it will be E1.
I believe he is asking the segment definition alone, you go to WE60 transaction and give the inputs and click the parser button and that will give you the definition of the idoc and which you can share it with your partner.
Thanks,
Mahesh.

IDOC Segment Definition received instead of Segment type

Hello Folks,
When i send a Z Idoc Segment from A to B System, It is successfull from A System, but in B System sometimes its erroringout because in the inbound idoc Segment Definition is coming instead of Segment type.
For Example
From A System I have sent Z1P0002 segment
B System I have received Z2P0002000(Which is the segment definition for Segment type Z1P0002)
Any inputs to above problem?

Hi,
The problem may be due to system B using a older release version of the IDoc. In those scenarios, even though your IDoc type is recognized, it may not be possible for the reciever to determine the right segment version of the reciever.
There are options in the WE20 partner profile configuration, Field Segment release in IDoc type and Segment Appl. rel. which enable the partner system preventing from erroring out.
BR/Yogesh
Edited by: Yogesh Surender on Jun 1, 2009 12:34 PM

Problem with creation of IDOC Segment Type

Hi,
I tried to create IDOC Segment Type Z1LFA1 but error
prompted "Structure Z1LFA1 already exist.".
I tried deleting it at se11 but prompted
"You cannot edit object R3TR TABL Z1LFA1 with the
standard editor"
and at sm30-TADIR, but prompted
with "Cannot delete object directory entry, object exists."
How will go about this??
Please help!
Thanks!

hi,
yup, tried doing that on we31 but the segment does not exist yet.
we're currently upgrading from 4.6 to ecc, I think the structure
was tranferred to our ecc client but the idoc segment and idoc type were not. I'll just have to transport it then.
Thanks!

Fill IDOC segment, E1IDBW1. For PEXR2002 Basic Type

Hello Team.
We send the IDOC for the Basic Type PEXR2002, Message Type PAYEXT.
This IDOC doesn't fill the Segment E1IDBW1 (IDoc header - special instructions (INP) )
I'm review some notes(1164524) and said to fill this segment it's neccesarie config the IHC.
But doesn't have this functionality.
It's possible fill the segment E1IDBW1 in a user exit or any other enhacement at creation idoc moment?
My idea is used the FM
CALL FUNCTION 'GET_SEGMENT_POS_FOR_INSERT'
    EXPORTING
      I_BASIS_TYPE            = ch_edidc-idoctp
      I_EXT_TYPE              = ch_edidc-cimtyp
      I_SEGMENT_TYPE          = 'E1IDBW1'
    IMPORTING
      E_INDEX                 = li_tabix
    TABLES
      IT_EDIDD                = t_edidd
    EXCEPTIONS
      BASIS_TYPE_NOT_FOUND    = 1
      EXTENSION_NOT_FOUND     = 2
      EXTENSION_ERROR         = 3
      INVALID_IDOC_DEFINITION = 4
      IDOC_ERROR              = 5
      INVALID_SEGMENT_TYPE    = 6
      INVALID_START_INDEX     = 7
      NO_MORE_POSITION        = 8
      TOO_MANY_SEGMENTS       = 9
      OTHERS                  = 10.
To Fill 2 constants in this segment.
Do you have any other idea?
Thanks
Edited by: David Lezama Gonzalez on Sep 1, 2011 2:51 PM

Hi,
Basically the segment E1IDBW1 will always be filled via user exit.
If you work with the IHC (In-House-Cash) application you have to fill
the E1IDBW1 segment as described in note 626577.
If you don't work in an IHC environment the following conditions must
be fulfilled:
1. The payment program has to fill certain fields (e. g. REGUH-DTAWS,
REGUH-DTWS1 - REGUH-DTWS4).
2. If this is fulfilled the payment data (REGUH, REGUP tables) will
be filled. The instruction keys will be moved to IDOC segment
E1IDKU3.
3. In user exit EXIT_SAPLIEDP_002 you can take over the instruction
keys from segment E1IDKU3 into E1IDBW1.
You may also read note 496663, this note explains about user exit
EXIT_SAPLIEDP_002 to populate this field in the idoc.
Also, you can check the note:
580321 - RFFOEDI1: BTE process 00002441 (Change IDoc)
REgards,
Cristiano

Custom segments to basic IDOC type without extension

Hi,
Is it possible that an IDOC has custom segments which are getting populated and the basic type does not have any custom segments.
How should we find from where the custom segments are getting populated and displayed?
Regards,
Subhashini

Hello,
Lets say in DELVRY05 Idoc Type, we have a Segment Called E1EDL20 and since this is a Standard SAP Provided Basic Type, it will not have any Custom Segments ( Z-Segments). Now, If I want some additional Information to be populated as part of a Custom Segment, what I would do is to Create an IDoc Extension ZDELVRY05 with reference to the Basic Type DELVRY05 and Create a Custom Segment Z1EDL20 (Per Say) in which I'll populate the Custom Data Fields using an Exit. So, unless we create an IDoc Extension for a Basic Type, the Standard SAP Basic Type will not have any Custom Segments-Fields (Z-Segments).
Thanks,
Venkata Phani Prasad K

Idoc segment version in idoc type

Similar Messages

Maybe you are looking for