Idocs recieved by BODI uninterupted after F6 is pressed from SAP

Hi All
My apologies if i have posted the thread in wrong forum, as i am new to business objects
I have built an outbound interface which sends idoc data from SAP to Business Objects data integrator(BODI), idocs are created perfectly but they are stuck in trfc queue(SMQS/SM58) if the external system is restarted and the first set of idocs are going, there are 9 listeners(ports) of the external system so i need to press F6(execute LUW manually) once for each listener(port) , after that the transfer of idocs is without interruptions until the external system is restarted again
any clues are appreciated

You have posted the above in wrong Forum try forum "Other Business Objects Products".

Similar Messages

  • I can't send, recieve sms and calls after i delete messages from my phone

    help. how to fix?

    Problem Fixed.
    After doing a factory reset, I set up phone as new. this then resolved the problem.
    Before doing this i recommend backing up yur contacts, and making a note of all your personal preferences. as you will have to set it up from scratch again.
    Cheers to everyone who helped out,
    Jack Walsh

  • Missing IDOCS from SAP to BODI

    I have an issue of missing idocs from sap going to BODI.
    Idocs are received by BODI trough adapter, but there are idocs that are missing but are successfully sent by SAP. When trying to resend the idocs it was successfully received by BODI.
    We thought that it is an intermittent connection issue, so we try to send idoc from SAP while the adapter was down. The idoc was successfully sent from SAP. Then we try to start again the adapter and it was loaded after sometime.
    Iu2019m now out of idea on why does the idocs went missing. Can someone help me?
    Thanks in advance.

    Hi Parida,
    IDoc Status 03...Green Status... wills not guarantee you that IDoc reached EDI subsystem...
    Run the Program RBDMOIND in SE38...
    Changed on                               :<Date>
    IDocs/Commit Work                   :100
    Display IDoc not sent- Check the Check Box.
    Now you will get list of un posted IDocs

  • I have a scenario,  ECC-PI-Message broker. ECC sending IDOC to  PI, PI execute mapping and  sending data to Message borker.(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI  after mapping we need to save file in SAP fold

    I have a scenario,  ECC-PI-Message broker. ECC sending IDOC to  PI, PI execute mapping and  sends data to Message borker(thru JMS channel).(with almost one to one mapping)., IDOC(AAE)-PI-JMS. Now my requirement is., from PI  after mapping we need to create file with same data what ever send to Message broker and put the file in SAP folder without touching mapping. Is it possible? Please advise with the steps. We are using the ICO for this senario. Quick response is appriciated.

    Hi Pratik,
    This link might help.

  • IDocs missing in Target Side after BPM process

         We are having couple of IDOC->XI->File scenarios where BPM is designed as per the BpmPatternCollectTime standard pattern.
         The issue is like when we send 100 idocs from ISU system, and the collection process is set as say 3 minutes, we'll be getting 2 files. Here the first file will be having 92 idoc data and the second will be having only 1 idoc data. We are confused with the missing of 7 idocs in between.
          These seven idocs are getting missed in between the exception to come out of the collection loop after the first 3 minutes and the starting of the second instance which will again go on for 3 minutes.
    Can anyone provide some ideas to resolve this issue???
    Thanks in advance

    HI Jayakrishnan,
    I understand what you are telling...but check this line from sap help...
    <i><b>The system checks the deadline at runtime. If the deadline has been exceeded, the processing branch is executed for the deadline. The steps in the remaining processing branches in the block are not affected by this. In particular, note that these steps within a block are not automatically completed.</b></i>
    that means along with the deadline branch the main branch is also getting executed(that is what i make out from this - pls correct me if i understood wrongly)...
    if this is the case...can you give a try with the following suggestion...have a container variable with a default value....which will be set to a different value in the deadline branch(remove the exception raising from the deadline branch) the main branch after the append step...there has to be a switch step which checks for the value of this container variable....if it has the dead line value then raise the excpetion here...other wise donot do anything...
    give it a shot...i think it is worth trying...

  • We have to upgrade from SAP 4.0 version to ECC6.0(only EDI/IDOC effects)

    Hi All,
    We have to upgrde a system from SAP 4.0 version to ERP6.0, is there any difference in EDI and IDOC
    tables or their types in ERP6.0 from the 4.0 version, which we have to also consider or not.
    but if differences are there but SAP itself is taking care for that, then how the sap is taking care of that ..?
    Rohit Sharma
    Edited by: rohit sharma on Jun 19, 2008 1:26 PM

    I´m not sure what you mean by "old table to new table".
    The general table structure is not changed, VBAK + VBAP are still there. They may have been extended by additional fields, depending on how your system is implemented. It´s also possible, that if you activate any business function after the upgrade, that tables will get appends.
    The old IDOC structures working before the upgrade should work after the upgrade the same way since those structures are not touched.

  • Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

    I try to send idoc from SAP r/3 4.6C to PI 7. I had made  ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
    Is somebody can help me ?

    In R/3 :
    my RFC destination is type 3 and point to XI. The port in the partner profile  point to this RFC destination. ( all seems good !).
    In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
    When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038  "1 master IDocs set up for message type MATMAS" and just after
    the XI logon screen  appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
    Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

  • Problem in  Outbound IDOC from SAP R/3

    I am working on to send an IDOC from SAP R/3 to XI.
    I configured all necessary things as follows:
    1. Created for XI in sender system -- RFC dest, PORT and a partner profile with an outbound parameters and reciever port as XI port.
    2. created for sender system in XI -- RFC dest, PORT(as SAP<SID>) in IDX1 and assigned an idoc type(coming from sender system) to the port.
    Now I am trying to push the IDOC from sender system using Test IDOC transaction and gets success message as data is passed to port.
    My problem is I am not able to see any message in SM58 of XI server.
    Could anyone help me out?
    Thanks In Advance.

    you hardly see the idocs in Xi in sm58. Try sxmb_moni.
    If you see anything there try sm58 on the sending R/3. There you see if you have connection problems (eg authorization in XI or missing receiver determinitions).
    Hope it hellps,

  • To send IDOC to vendor from SAP for purchasing order

    Hi Gurus,
    I want to setpu an EDI for send the outbound & inbound idocs to vendor for purchasing order from SAP and below are the message type I am using:
    Outbound message type :
    Inbound message type :
    I know how to set up the link, making the partner profiles attaching the process code, assigning the ports but I want to know the below customize set up:
    1) Which transaction I need to used for customize this sceranio
    2) Could you provide me any documentation which specifies the steps for configuration
    And other details which I am suppose to know.
    Please reply me as soon as possible as I am urgently in need of this.

    Hi Sagar
    For the Confirmation you need to do the customizing for confirmation control, like what would you like to do after the confirmation. Confirmation is an inbound process.
    For Invoice you need to complete the customizing under LIV in SPRO- for Invoices received via EDI.
    Please go throught the help link for further details.
    Reward points if useful
    Thanks & regards

  • Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

    Hi all,
    I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
    1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
    2. SLD is OK: Technical System and Business System are correct for these two SAP System.
    3. Integration Repository: all designed Object is OK.
    4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
    5. Runtime WorkBench: is OK. "Test Message"  Function of "Integration Server" is OK.
    In general, it is all OK.
    But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from  this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
    Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
    Thanks a lot for all in advance,
    Best regards,
    Vinh vo

    Possible checks
    At R/3 side
    1) Check in SMQ1 and SM58
    At XI Side
    1) Check in SMQ2 and IDX5
    Check this

  • IDoc Acknowledgement from SAP PI to SAP R/3 Server

    Hi Experts,
                  I am sending an IDOC from sap r/3 to SAP PI. After receiving the IDoc I need to send back one acknowledgement to the sap r/3 server, without reaching the target side. Could you guys please help me?

    it can send back an acknowledgement IDoc (ALEAUDIT) back to R/3 system
    This configuration works for sending ACK message back to the Source system from the Target System and should not be mistaken to enable PI to generate the ACK and send back to the Source system.
    What can be done is include the source system as receiver in the receiver determination (SAP system is both at the source and target....alongwith the existing FILE target service)......configure different ID objects for this Source > PI> Source ACK flow .... map required data in the mapping.....depending on your need you can use the target structure IDOC/ PROXY/ RFC.

  • ** Not able to import IDoc from SAP ECC system

    Hi Friends,
    I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
    While import (after giving the user name and password), I am getting the following error.
    Problems to reach R3 System
    What could be the probelm ?
    Kindly help me friends.
    Thanking you.
    Kind regards,
    Jegathees P.

    Just counter check following step
    1. Go to SWCV definition tab select radio button for Import of RFC....
    2. In Connection Data for Import from SAP System maintain correct System and correct Client.
    3. Make sure you maitain ECC system in Central SLD.
    4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
    With Regards

  • Download IDOC structure from SAP web Site

    to anticipate the SAP ERp upgrade, i would like to download the most up to date Idoc structure (for ADRMAS and DEBMAS) . Instead of download this structure from an SAP Instance , i would like to download it from SAP Web site.
    Does anybody already do that ?
    How can i proceed

    Hi Siva
    Thanks for your input. I Know and i did that from a couple of years , neverthelss, each time you upgarde your system, you have to rewrite your development. My goal is to try to anticipate that by for exemple download the IDOC structure in advance . Let me say IDOC structure used by MySAP ERp 2007 instaed of SAP ERP 4.6. If i can download those STructure i will not be obliged to rewrite my Dev after each upgrade. Do you see what i mean ?

  • Warnings while receiving IDOC from SAP

    Hi All,
    I am running BTS 2010. I configured recieve location to recieve ORDERS05 Idocs. But I am receiving below mentioned warning.
    1) In SAP the Idoc shows as successfully sent
    2) On the BizTalk side we cannot find the Idoc anywhere
    3) In the EventLog of our BTS we get the following errors (the errors are raised exactly at the same time when the Idoc which “disappears” is sent from SAP to BizTalk )
    Error 1:
    Event Type: Warning
    Event Source: BizTalk Server 2010
    Event Category: (1)
    Event ID: 5740
    Date: 1/10/2014
    Time: 12:38:59
    User: N/A
    The adapter "WCF-Custom" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.XmlReaderGenerationException: The segment or group definition E1234 was not found in the IDoc metadata. The UniqueId
    of the IDoc type is: IDOCTYP/3/ORDERS05//700. For Receive operations, the SAP adapter does not support unreleased segments.
       at Microsoft.Adapters.SAP.TypedIdocBodyWriter.OnWriteBodyContents(XmlDictionaryWriter writer)
       at System.ServiceModel.Channels.BodyWriter.WriteBodyContents(XmlDictionaryWriter writer)
       at System.ServiceModel.Channels.BodyWriterMessage.OnWriteBodyContents(XmlDictionaryWriter writer)
       at System.ServiceModel.Channels.Message.WriteBodyContents(XmlDictionaryWriter writer)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfMarshaller.CreateBizTalkMessageStream(Message wcfMessage, IAdapterConfigInboundMessageMarshalling config)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfMarshaller.CreateBizTalkMessage(IBaseMessageFactory messageFactory, IAdapterConfigInboundMessageMarshalling marshallingConfig, Message wcfMessage)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfMarshaller.CreateBizTalkSubmitMessage(IBaseMessageFactory factory, String inboundTransportLocation, String inboundTransportType, RLConfig config, Message wcfMessage,
    String ssoToken)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkSubmitBase..ctor(Message message, BizTalkEndpointContext endpointContext, ControlledTermination control, AsyncCallback realCallback, String ssoToken)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkSubmit..ctor(Message message, AsyncCallback callback, Object state, BizTalkEndpointContext endpointContext, String ssoToken, ControlledTermination control)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkOperation.Create(Message message, AsyncCallback callback, Object state, String ssoToken, Boolean bizTalkOneWay, BizTalkEndpointContext endpointContext, ControlledTermination
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance.BeginOperation(Message message, AsyncCallback callback, Object state, Boolean bizTalkOneWay)".
    Error 2:
    Event Type: Warning
    Event Source: BizTalk Server 2010
    Event Category: (1)
    Event ID: 5740
    Date: 1/10/2014
    Time: 12:38:59
    User: N/A
    The adapter "WCF-Custom" raised an error message. Details "Microsoft.Adapters.SAP.RFCException: Details: ErrorCode=RFC_INVALID_HANDLE. AdapterErrorMessage=An exception has occurred on the listener while executing
       at Microsoft.ServiceModel.Channels.Common.Design.AdapterAsyncResult.End()
       at Microsoft.ServiceModel.Channels.Common.Channels.AdapterReplyChannel.EndTryReceiveRequest(IAsyncResult result, RequestContext& requestContext)
       at Microsoft.Adapters.Internal.LayeredChannelBindingElement.LayeredInboundChannel`1.System.ServiceModel.Channels.IReplyChannel.EndTryReceiveRequest(IAsyncResult result, RequestContext& context)
       at System.ServiceModel.Dispatcher.ReplyChannelBinder.EndTryReceive(IAsyncResult result, RequestContext& requestContext)
       at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.EndTryReceive(IAsyncResult result, RequestContext& requestContext)".
    Error 3:
    Event Type: Warning
    Event Source: BizTalk Server 2010
    Event Category: (1)
    Event ID: 5740
    Date: 1/10/2014
    Time: 12:38:59
    User: N/A
    The adapter "WCF-Custom" raised an error message. Details "The WCF service host at address sap://CLIENT=100;LANG=;@a/
    has faulted and as a result no more messages can be received on the corresponding receive location. To fix the issue, BizTalk Server will automatically attempt to restart the service host.".
    Error 4:
    Event Type: Warning
    Event Source: BizTalk Server 2010
    Event Category: (1)
    Event ID: 5740
    Date: 1/10/2014
    Time: 12:38:59
    User: N/A
    The adapter "WCF-Custom" raised an error message. Details "System.ServiceModel.CommunicationObjectFaultedException: The communication object, Microsoft.Adapters.Internal.LayeredChannelBindingElement.LayeredInboundChannel`1[System.ServiceModel.Channels.IReplyChannel],
    cannot be used for communication because it is in the Faulted state.
       at System.ServiceModel.Channels.CommunicationObject.Close(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Close()
    at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.Close()".
    As per the replies in the above link i made the changes but still warning continues.
    Please suggest

    The IDOC has not arrived in BizTalk, that's why you do not see it. The problem is that the IDOC fails at adapter level, when the SAP RFC Library is called.
    The actual problem is that the IDOC you are receiving is containing unreleased segments and that's not supported, you should contact your SAP administrator to get this problem resolved.
    If I'm not mistaken it's transaction WE30 in SAP, there you have to select the IDOC type (ORDERS05 in your case) and then you can set the release. But your SAP administrator will probably know better how to do this
    Glenn Colpaert - MCTS BizTalk Server - Blog :

  • EDI IDOC OUTBOUND send Purchase Orders from sap to vendors

    Hi Experts,
           I am new to EDI IDOCS, but i got object on this. So my requirement is purchase orders are send to vendors from sap (OUTBOUND) through EDI-850 format. and also i have to add some more fields to standard idoc type ORDERS05, one more condition is if vendor type is not EDI, then the POs should send through fax, email, how can we solve this condition.
    So plaese send some sample code on this object.
    Thanks in advance,
    S Reddy

    Hi ,
    You can send the purchase order to the vendors using different outytpes configurations in NACE transaction .
    If you define a particular output type where you need to give medium 6 and define partner functions within this you can also set condition which partner needs to recieve EDI output and which one FAX or email all this will be done by Functional expert.
    For adding extra segments to your basic type ORDERS05  you need to extend the idoc you can do it via WE30 and WE31 .Link you message type to basic type and extension . Please follow below tcodes for further help . Create all the requested steps in the tcodes mentioned below.
    we20:patner profile
    we30:idoc creation
    we30:segment creation
    we81:message type
    we82:link message with idoc type.
    we02:to status of idocs.
    Now you need to write code for filling those extra segments you have added to you extension type. For that you need to check where your new segment is placed in Idoc structure . There will be a exit avaliable to attach your code to fill those segments .
    Please go through previous SDN links to see more info.
    One the settings are done in the NACE , issue output from PO transction and once your output is processed check your Idoc in WE02 to see if the segments are coming with the desired data.

Maybe you are looking for