If 3G connection drops when using dictation, will the dictation be saved?

If 3G connection drops when using dictation, will the dictation be saved so that it can be used later?

If you mean a voice recording that get transcribed, no.

Similar Messages

Connections drop when using Cisco Anyconnect Secure Mobility Client

Folks I have a strange issues. I have a few laptops that I'm testing using the Cisco AnyConnect Secure Mobility Client Network Access Manager. We like the interface and overall are happy, but have one nagging issue. Periodically the connection drops when using the client, and the only way to reconnect is to choose the Network repair option on the client. That fixes it just fine, but we shouldn't have to do this. The same clients using the built in WIndows supplicant do not have this problem. We are on version 3.0.07059.

Right now I'm testing on a single access point (autonomous) with WEP! The same laptop works fine without the Cisco client. Usually it is several hours, 12 or more when it happens, but I've seen it less than that. And I've seen it up for over a day and a half. At this point I just don't trust the client to roll out to a larger audience.

Airport connection drops when using external monitor

I just bought a new monitor to use as a 2nd display for my Macbook. Problem is, as soon as I plug it in, my wireless connection just kills over and dies a horrible death, but as soon as I unplug my MiniDisplay to DVI adapter, it works great.
I've been searching around and there were a few topics on this, but it didn't really look like anyone had a definitive answer for what to do. Some suggested that the DVI cable wasn't shielded and that was causing RF interference, but my DVI cable has the little round plugs at each end.
Is there any other possibilities to fix this?
Thanks

I was having this same problem for quite some time, and several Genius Bar people were not able to diagnose the problem. I checked back from time to time on the net to see if anyone had figured this out, and someone now has. For me, it was as simple as changing the channel option of the airport express from automatic to a manual selection...in my case "6." I've seen a couple posts on this now and some switch from 11 to 6, or vice versa. Mine was set up for automatic selection, so I first manually selected 11. That didn't help, but selecting 6 fixed things immediately. Here's the thread that helped me: http://discussions.apple.com/message.jspa?messageID=11051427
and since I found it's not that easy if you don't know how, here are directions for changing the channel on your airport express:
http://forums.macrumors.com/showthread.php?t=379142

When I connect my guitar using apogee jam the note drops off after a few seconds. Why???

When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
Its the same on most of the preset amps.
Please help, the apogee cost me £80!

Is it stopping recording after 8 seconds? Are you using Garage Band?
If both of these are correct:
This is actually a feature (i'm not sure why it defaults to this). Instructions for the iPhone version are below:
With the amp section open, touch the sproket on the upper right.
You should be in a "settings" type area with three tabs. Touch "Sections"
Select the section and switch it to automatic - it will now record until you stop recording by touching the stop icon.

Resolution drops when using type effect over image

Using a type effect over an image causes the resolution to drop below acceptable levels (211 dpi). The client has used a glow effect around text to knock back the image for better legibility. The image is 300 dpi, the text box is transparent with an outer glow effect. I matched the effect with a drop shadow using white but the problem still happens. I've increased the resolution of the image to 600 dpi, same problem. My transparency flattener presets: Raster / Vector Balance 100, Line art and text resolution 2400ppi, Gradient and mesh resolution 400ppi. Downsampling for PDF export is off. Printing postscript doesn't solve the problem. I've solved the issue by recreating the effect in Photoshop and turning the effect in InDesign off. This is in CS6, but I've opened the file in CC 2014 and have the same problem. Anyone have a solution?
Thanks!

The problem is within the digital file that's exported or postscripted to our PDF workflow. Preflighting in InDesign indicates no problems but the exported PDF in Acrobat shows the problem. Prinergy and Printready both fail the refine as our lowest acceptable limit is 280dpi. The PDF looks fine, the problem will be when the (offshore) printer preflights the PDF and sees the resolution problem. The issue is with the InDesign effect reducing the resolution - only in the area under the text box. All the images, text etc are CMYK. If I turn off the effect the PDF is all good.

Broadband connection drops when a phone call is re...

Hi
I am new to this forum so please let me know if I don't supply all the necessary information.
For a couple of months now we have had a consistent problem with the broadband connection dropping when an incoming phone call is received, prior to this it had been fine for a long time. After making the normal user checks, as recommended by BT, the problem persisted. A BT engineer visited my house and was able to reproduce the fault at the master socket. He traced the line back, via the manholes under the street to a connection box outside the village. After working hard for four hours he seemed to have fixed the fault and was able to demonstrate streaming video uninteruppted by an incoming call. He told me that he had solved the problem by re-routing the line, he also replaced the mark 2 router with a mark 3 router. Twenty four hours later the problem returned and is again absolutely consistent - even with just the router connected to the master socket the broadband light will go out when an incoming call is received. On phoning the helpline I was told that there was a problem at the exchange, which should be fixed within 24 hours, but it wasn't and I didn't hear back. Further investigation showed that both of these issues had been marked as resolved. We are a long way from the exchange and have had a history of problems with both the line itself and the exchange. In the past the hard working BT engineers have always managed to get things sorted out when they have visited.
This time I am struggling, as I can't seem to find the right approach to BT to persuade them to build on the work that the engineer who came out so recently did - I always seem to end up describing the problem from the beginning and then being told that it is my internal wiring that is at fault, nobody will acknowledge any of the work that has been done by the engineer that visited or the person that approached the exchange.
Sorry for such a long post, but it is very frustrating - I have considered changing the phone number so that nobody can make any incoming calls, but then I would have no phone!!
Any ideas would be gratefully received.

Hi John
Thank you for your very prompt response. Clicking on that link does not show up any problems in my area or with my line. I have limited technical knowledge, but what you say about high resistance does fit the facts. We have had a lot of problems over the years, most of which have been traced back to faults between the box at the edge of the villagae and our house - we have had the line replaced more than once, although I'm not exactly sure what that involved. In the past the fault that recurred was very slow speed and dropping of the broadband connection, this is different now in that the speed is actually now quite good for our area, but the connection drops when a phone call is made or received. I did have the fault logged with BT, but it has now disappeared from "track faults" without being resolved.
When everything is working it is a very good service. My friend in an isolated village in North Wales had BT broadband as soon as his local exchange was enabled. It has provided faultless service ever since, at a higher speed than I can get on the outskirts of a major city.
Thanks for the support, it has made me feel much less isolated - I'll keep reporting it.
Regards
Richard

When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e

HT1277 Cannot open links when using Safari (will open in Chrome). Anybody have an idea? Settings??

Cannot open links when using Safari (will open in Chrome). Anybody have an idea? Settings??

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

hi have done as you said plug ethernet straight into computer and into back of router,and worked straight off,i had the the powerline on extention when imac was up stairs,when i had computer down stairs it still would not work with powerlines even on main wall sockets,so they are getting binned,looks like i will have to move router upstairs,just wondering if i got extention wire from back of openreach box to router upstairs```,would it be ok,,the openreach box is next to my only phone socket in house,which is in back kitchen..any advice would be great,

HT2284 Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting T

Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting TC.
The TC is the wifi base station, also have AirportExpress on the network, both of which work fine. The TC has an external disc connected as well, which is also visible in the sidebar but also cannot be connected to. Several MB computers use the network, all of which either can or cannot connect to the TC disc depending on when it is acting up.
Any ideas other than clicking "connect as" or powering down the network every time?

Read up how to install 5.6 utility into ML.. it is pretty easy.
I downloaded 5.6
http://support.apple.com/kb/DL1482
Download unpkg
http://www.timdoug.com/unpkg/
Open the dmg to get the pkg.. drag it onto unpkg.. and it will create a directory under desktop with all the files.. drag the application to the utility directory.. or just run it direct.
Google if you want more explicit instructions.
Much easier with a real tool instead of a toy.
Hold the option key when you select firmware update.. all the old ones will appear.
But this will not work on newer Gen4.. only on every other model and early Gen4. .I do not know when they turned the corner and started this only 7.6 nonsense.

Error when using PPR in the OA page developed.

HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.

What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block.

When composing new email (gmail) tool bar showing fonts, colors, bold, italics, underline, etc. is missing? When using Internet Explorer the bar is there.

When using Firefox, the tool bar above the "compose mail" window is missing. I cannot change fonts, use bold, italics, underline, change colors, align margins, etc. When using Internet Explorer the bar IS there but I prefer Firefox, as it is much faster. My operating system is Vista.

Thanks Tony T1, I have tried using the Mail -> Format drop downs...
... and using the format toolbar...
... and in both cases, Bold and Italic is greyed out... (bit hard to see in the second screenshot, but it is, honest!)
The mail message is def set as Rich Text, which you can see in the first screenshot, as the option to Make Plain Text is there...

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H.

My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%.

My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%. Sometimes it will reboot on its own, and other times you have to leave it for an hour or so and then manually turn the phone on again. Any ideas?

Did you try to reset the phone by holding the sleep and home button until the Apple logo comes up again?
If this does not work, try to save as much data as you can and set it up "as new device": How to back up your data and set up as a new device

Why won't cells autopopulate when using numbers on the ipad? Anyone have a fix? Have also created a dropdown menu, but that does not translate from excel to numbers either.

Why won't cells autopopulate when using numbers on the ipad as they will in excel? Anyone have a fix? I have also created a dropdown menu in excel, but that does not translate from excel to numbers either.

Glad you got it sorted out.
Diane123456 wrote:
> Thanks Vix, Joe, and Mad Dog for responding, the site is
in
> development so it's behind a password, which I probably
could share
> but MD is right, it was a margin issue. I didn't think I
needed to
> set a margin but I had to put a left margin of 2em on it
for the
> numbers to display on IE7 or IE6
>
> This is actually a rather common issue with CSS layouts
(it is not an
> issue with designs using tables) - there are several
posts for ULs
> which you may be interested in - see
>
>
http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=
> 1981&productId=1&loc=en_US
>
> -- and once I got the numbers to show I ran into the
same problem as
> the commenters on the above thread, which noticed that
the vertical
> alignment doesn't work well with IE, and which noted
that apparently
> IE has a stutter because it just kept repeating "1" "1"
"1" -- so I
> finally went with a hanging indent and just put the
numbers in there
> manually - fortunately it's not a long list.... if you
have a fix
> for the stutter, or know of another place to get help
with CSS layout
> browser quirks please share -- if I find another one
I'll share also
>
> thanks again, Diane

If 3G connection drops when using dictation, will the dictation be saved?

Similar Messages

Maybe you are looking for