IFD setup installation/configuration to an existing CRM 2011 system
Hi,
I read somewhere a while ago that you can only setup IFD for your CRM when you are installing CRM system. You can't add IDF later on to an existing CRM setup. I wanted to check with you if this is true? I tried finding that piece of information again but
I could not find anything like that online. May be it was a blog or something that I read before CRM 2011 was launched officially. We have multiple server CRM environment. 2 App servers, 2 platform servers, 2 web servers. App servers are running CRM on port
80 as default website.
So, can we install and configure IFD to an existing CRM 2011 system?
Is there any difference or issues when you install/configure IFD to an existing CRM 2011 system?
Thank you,
-Imran
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful" Thanks, Imran Abbasi
Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript
Similar Messages
-
New ECC system with new org structure into existing CRM 7 system
Hi,
We have a situation where we have a current ECC 6 system which distributes organisation structure to a CRM 7 system using ALE (org units, positions, personnel numbers).
We are implementing a new ECC 6 instance as a result of a merger which will have a new org structure, the CRM 7 system remains.
My question is has anyone dealt with a similar situation where a new org structure is distributed into an existing CRM or SRM system? Any lessons you could share? Or tips for how to approach this?
Thanks
MarcYou need to schedule program RHALENI in Insert mode to achieve the same
Thanks,
Sundeep -
DG setup/installation/configuration guideline
Hello,
I have to setup a data guard (including Primary and 1 standby database) for Production DB. DB version 11.2.0.3 on RHL 6.
I know each and everything regarding single instance database installation/creation with asm,rman backups,etc everything I need. I do not know how I would create PHYSICAL STANDBY DATABASE (on another host).
For example:
which Oracle software installation option or which database creation (dbca) option?
How I would link that Standby database to the Primary database?
How to test that Standby DB is setup perfectly (archived logs shipped properly)?
How to setup Data Guard Broker setup to manage it?.
Normally, we have few DG setups and have separate machine for GRID CONTROL to manage them. But unfortunately, I have not setup any DG setup with GRID CONTROL, Agents. How to setup this GC, agents, etc?
I would highly appreciate if you could guide me in these regards plus any official document link or particular Oracle Support note id for the guidelines, so that I feel confidence to setup a complete Data Guard setup.
Bundle of thanks.
Best Regards.No. DBCA is use to create a new database.
Standby Database is not a new database, it's a replica of your production database.
oracle should be installed on the server where you want to create standby database.
for your reference i am giving you one more links.
http://wysheid.com/blog/?p=367
This is different method.
chose which ever you find appropriate -
Reporting Services Configuration with CRM 2011
Hello,
I have successfully configured SharePoint 2010 and CRM 2011 in a DEV environment to use CRM 2011 reports in a SharePoint 2010 library. However, in production, this is not working due to the following:
When I try to run a CRM 2011 report in the SharePoint 2010 library, I see this error:
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EMCFCRM2011'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Also, the data source Test Connection returns this error:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON
The SharePoint Integrated Report Server is on the SharePoint VM, and has account credentials (in the SharePoint configuration) that has access to the CRM 2011 databases (organization and MSCRM and ReportServer databases)
Thanks in advance,Hi,
It looks like Reporting Services is trying to connect to SQL Server using Windows Authentication. When you try this from anywhere other then the RS server, this will require Account Delegation in order for the SQL Server to trust the windows account credentials
which the RS server is passing on to it. This is often problematic to set up as it requires (from memory) kerberos authentication, several settings on the server Active Directory accounts (for both the server accounts and the user account), and is not usable
if your users and servers are in different AD forests.
Probably the easiest solution for you would be to create a SQL login on the SQL Server, and then use RSConfig.exe on the RS Server to tell Reporting Services to always use the new SQL login, instead of Windows Authentication.
More information, please refer to the link:
http://www.experts-exchange.com/Database/Software/Q_23242435.html
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Need to know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8
Hi,
Could you please let me know the steps to setup 'Configurable Search' in PeopleSoft CRM 8.8(PeopleTools 8.48)?
ThanksPeopleBooks > PeopleSoft Enterprise CRM Automation and Configuration Tools PeopleBook > Configuring Search Pages
Nicolas. -
CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR
제품 : AOL
작성날짜 : 2004-05-13
PURPOSE
RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
Explanation
Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
1. The database instance that supports the CP, Applications, and Middle-Tier
processes such as Forms, or iAS can fail.
2. The Database node server that supports the CP, Applications, and Middle-
Tier processes such as Forms, or iAS can fail.
3. The Applications/Middle-Tier server that supports the CP (and Applications)
base can fail.
아래부분은 CM,AP 구성과
CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
The concurrent processing tier can reside on either the Applications, Middle-
Tier, or Database Tier nodes. In a single tier configuration, non PCP
environment, a node failure will impact Concurrent Processing operations do to
any of these failure conditions. In a multi-node configuration the impact of
any these types of failures will be dependent upon what type of failure is
experienced, and how concurrent processing is distributed among the nodes in
the configuration. Parallel Concurrent Processing provides seamless failover
for a Concurrent Processing environment in the event that any of these types of
failures takes place.
In an Applications environment where the database tier utilizes Listener (
server) load balancing is implemented, and in a non-load balanced environment,
there are changes that must be made to the default configuration generated by
Autoconfig so that CP initialization, processing, and PCP functionality are
initiated properly on their respective/assigned nodes. These changes are
described in the next section - Concurrent Manager Setup and Configuration
Requirements in an 11i RAC Environment.
The current Concurrent Processing architecture with Global Service Management
consists of the following processes and communication model, where each process
is responsible for performing a specific set of routines and communicating with
parent and dependent processes.
아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
있습니다.
Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
Manager.
The Internal Concurrent Manager (ICM) starts, sets the number of active
processes, monitors, and terminates all other concurrent processes through
requests made to the Service Manager, including restarting any failed processes.
The ICM also starts and stops, and restarts the Service Manager for each node.
The ICM will perform process migration during an instance or node failure.
The ICM will be
active on a single node. This is also true in a PCP environment, where the ICM
will be active on at least one node at all times.
Service Manager (FNDSM process) - Communicates with the Internal Concurrent
Manager, Concurrent Manager, and non-Manager Service processes.
The Service Manager (SM) spawns, and terminates manager and service processes (
these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
other process controlled through Generic Service Management). When the ICM
terminates the SM that
resides on the same node with the ICM will also terminate. The SM is ?hained?
to the ICM. The SM will only reinitialize after termination when there is a
function it needs to perform (start, or stop a process), so there may be
periods of time when the SM is not active, and this would be normal. All
processes initialized by the SM
inherit the same environment as the SM. The SM environment is set by APPSORA.
env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
listener must be active on each CP node to support the SM connection to the
local instance. There
should be a Service Manager active on each node where a Concurrent or non-
Manager service process will reside.
Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
Manager.
The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
restarts any failed ICM on the local node. During a node failure in a PCP
environment the IM will restart the ICM on a surviving node (multiple ICM's may
be started on multiple nodes, but only the first ICM started will eventually
remain active, all others will gracefully terminate). There should be an
Internal Monitor defined on each node
where the ICM may migrate.
Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
any client application process.
The Standard Manager is a worker process, that initiates, and executes client
requests on behalf of Applications batch, and OLTP clients.
Transaction Manager - Communicates with the Service Manager, and any user
process initiated on behalf of a Forms, or Standard Manager request. See Note:
240818.1 regarding Transaction Manager communication and setup requirements for
RAC.
Concurrent Manager Setup and Configuration Requirements in an 11i RAC
Environment
PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
GSM,
follow the instructions in the 11.5.8 Oracle Applications System Administrators
Guide
under Implementing Parallel Concurrent Processing using the following steps:
1. Applications 11.5.8 and higher is configured to use GSM. Verify the
configuration on each node (see WebIV Note:165041.1).
2. On each cluster node edit the Applications Context file (<SID>.xml), that
resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
ON </APPLDCP>. It is normally set to OFF. This change should be performed
using the Context Editor.
3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
have been modified also copy these to preserve the files.
4. Regenerate the configuration by running adautocfg.sh on each cluster node as
outlined in Note:165195.1.
5. After regenerating the configuration merge any changes back into the
tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
Each nodes tnsnames.ora file must contain the aliases that exist on all
other nodes in the cluster. When merging tnsnames.ora files ensure that each
node contains all other nodes tnsnames.ora entries. This includes tns
entries for any Applications tier nodes where a concurrent request could be
initiated, or request output to be viewed.
6. In the tnsnames.ora file of each Concurrent Processing node ensure that
there is an alias that matches the instance name from GV$INSTANCE of each
Oracle instance on each RAC node in the cluster. This is required in order
for the SM to establish connectivity to the local node during startup. The
entry for the local node will be the entry that is used for the TWO_TASK in
APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
some directory>/APPS<SID>_<HOSTNAME>.env)
on each node in the cluster (this is modified in step 12).
7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
165041.1 for instructions regarding configuring this entry. NOTE: With the
implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
must be active on all PCP nodes in the cluster during normal operations.
8. AutoConfig will update the database profiles and reset them for the node
from which it was last run. If necessary reset the database profiles back to
their original settings.
9. Ensure that the Applications Listener is active on each node in the cluster
where Concurrent, or Service processes will execute. On each node start the
database and Forms Server processes as required by the configuration that
has been implemented.
10. Navigate to Install > Nodes and ensure that each node is registered. Use
the node name as it appears when executing a nodename?from the Unix prompt on
the server. GSM will add the appropriate services for each node at startup.
11. Navigate to Concurrent > Manager > Define, and set up the primary and
secondary node names for all the concurrent managers according to the
desired configuration for each node workload. The Internal Concurrent
Manager should be defined on the primary PCP node only. When defining the
Internal Monitor for the secondary (target) node(s), make the primary node (
local node) assignment, and assign a secondary node designation to the
Internal Monitor, also assign a standard work shift with one process.
12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
env file on each node in order to specify a TWO_TASK entry that contains
the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
to bind each Manager to the local instance. This should be done regardless
of whether Listener load balancing is configured, as it will ensure the
configuration conforms to the required standards of having the TWO_TASK set
to the instance name of each node as specified in GV$INSTANCE. Start the
Concurrent Processes on their primary node(s). This is the environment
that the Service Manager passes on to each process that it initializes on
behalf of the Internal Concurrent Manager. Also make the same update to
the file referenced by the Applications Listener APPS_<SID> in the
listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
env" on each node.
13. Navigate to Concurrent > Manager > Administer and verify that the Service
Manager and Internal Monitor are activated on the secondary node, and any
other addititional nodes in the cluster. The Internal Monitor should not be
active on the primary cluster node.
14. Stop and restart the Concurrent Manager processes on their primary node(s),
and verify that the managers are starting on their appropriate nodes. On
the target (secondary) node in addition to any defined managers you will
see an FNDSM process (the Service Manager), along with the FNDIMON process (
Internal Monitor).
Reference Documents
Note 241370.1What is your database version? OS?
We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
Have you reviewed these docs?
Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
How to Setup and Run Data Collections [ID 145419.1]
12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
Thanks,
Hussein -
Setup and Configure IM Components SSO and DAS on Replica RMS Node
Dear All,
I was trying the step
Step 5: How to Setup and Configure IM Components SSO and DAS on Replica RMS Node In Multimaster Replication (MMR) with Identity Management (IM) Cluster in High Availability Env
But, at the stage to connect to OID, it is not connecting to the RMS database.
When I checked login through ODM, it is connecting fine. also, ldapbind is also binding fine.
How to solve this ? What will be the issue and where to check it ?
Also, from the RMS, when I am connecting through EM console, I am not getting any output on Infrastructure link to change the passwords. its showing
Identity Management
Error retrieving information of default metadata repository.
Unable to establish secure connection to Oracle Internet Directory Server ldap://devportal.paaf.gov.kw:636/ Base Exception : javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
If there is any experts, pls reply. Because, last time I created a TAR and it took months to resolve and ultimately nothing happened they closed the TAR after some time as I was busy with some other works and not able to proceed with the synchronization.
Thanks in advance,
With Regards,
Sheeja AnilRule [ 47 ]: fuser link
~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the fuser symbolic link /sbin/fuser -> /bin/fuser exists or
not. This is required for Suse 8.0 and Suse 9.0.
Test [ PASSED ] :
Not required =~ Exists|Not required
Action:
fuser link exists or not required.
Rule [ 48 ]: orarun package
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the orarun package is installed and if the oracle user
environment need to be reset. This is only required for Suse 8.0 and
Suse 9.0.
Test [ PASSED ] :
Not applicable =~ Not installed|Installed correctly|Not
applicable|Environment reset not required
Action:
orarun is not installed or installed correctly.
Rule [ 49 ]: semmsl
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmsl kernel parameter is 256 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmsl kernel parameter is 256 or higher.
Rule [ 50 ]: semmns
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmns kernel parameter is 32000 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmns kernel parameter is 32000 or higher.
Rule [ 51 ]: semopm
~~~~~~~~~~~~~~~~~~~
Description:
Check if semopm kernel parameter is 100 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semopm kernel parameter is 100 or higher.
Rule [ 52 ]: semmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if semmni kernel parameter is 142 or higher. For more details on
how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
semmni kernel parameter is 142 or higher.
Rule [ 53 ]: shmall
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmall kernel parameter is 2097152 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmall kernel parameter is 2097152 or higher.
Rule [ 54 ]: shmmax
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmmax kernel parameter is 2147483648 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmmax kernel parameter is 2147483648 or higher.
Rule [ 55 ]: shmmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if shmmni kernel parameter is 4096 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
shmmni kernel parameter is 4096 or higher.
Rule [ 56 ]: msgmax
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmax kernel parameter is 8192 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmax kernel parameter is 8192 or higher.
Rule [ 57 ]: msgmnb
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmnb kernel parameter is 65535 or higher. Refer to Oracle
Application Server 10g Installation Guide 10g - Chapter 4 - Section
4.3.3 Configuring the Kernel Parameters on Linux for more details on
how to configure this.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmnb kernel parameter is 65535 or higher.
Rule [ 58 ]: msgmni
~~~~~~~~~~~~~~~~~~~
Description:
Check if msgmni kernel parameter is 2878 or higher. For more details
on how to configure this parameter, refer to Oracle Application Server
10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
msgmni kernel parameter is 2878 or higher.
Rule [ 59 ]: file-max
~~~~~~~~~~~~~~~~~~~~~
Description:
Check if file-max kernel parameter is 131072 or higher. For more
details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
file-max kernel parameter is 131072 or higher.
Rule [ 60 ]: ip_local_port_range
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if ip_local_port_range kernel parameter is between 10000 and
65000 or higher. For more details on how to configure this parameter,
refer to Oracle Application Server 10.1.2 Installation Guide - Chapter
4 - Section 4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
ip_local_port_range kernel parameter is between 10000 and 65000 or
higher.
Rule [ 61 ]: limit processes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the limit of max processes is set to 16384 or higher. For
more details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
The limit of max processes is set to 16384 or higher.
Rule [ 62 ]: limit descriptors
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the limit of file descriptors is set to 65536 or higher. For
more details on how to configure this parameter, refer to Oracle
Application Server 10.1.2 Installation Guide - Chapter 4 - Section
4.3.2 Configuring the Kernel Parameters on Linux.
Test [ PASSED ] :
Adequate = Adequate
Action:
The limit of descriptors is set to 65536 or higher.
Rule [ 63 ]: Port 1521
~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if port 1521 is free or not. If port 1521 is used by an Oracle
listener version 10.1.0.2 or later, then the existing listener will be
used by the existing database and the Oracle Application Server 10g
Metadata Repository. The installer will perform this configuration
automatically. If port 1521 is used by an Oracle listener version
earlier than 10.1.0.2, then the existing listener need to be stopped.
After the installation is complete, the new 10.1.0.2 listener can be
configured to listen to the existing (pre 10.1.0.2) databases. If port
1521 is used by non-oracle programs, then this program need to be
configured to listen to ports other than 1521. Refer to Installation
Guide, section 4.4.4 for more details.
Test [ PASSED ] :
TNS Listener 10.1.0.2 or higher is running =~ TNS Listener 10.1.0.2 or
higher is running|Free
Action:
Port 1521 is not used, or is used by TNS*Listener version 9.0.1 or
higher.
Rule [ 64 ]: Environment Variables
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the following environment variables are not set: TNS_ADMIN,
ORA_NLS, and LD_BIND_NOW. In addition, the following environment
variables must not references to any existing Oracle Home: PATH,
CLASSPATH and LD_LIBRARY_PATH.
Test [ FAILED ] :
Has reference to existing Oracle Homes = Properly defined
Action:
Refer to the following table for the necessary action to take:
<PRE>
Return Value Action
Has reference to existing Remove any reference to existing
Oracle Homes Oracle Homes from PATH, CLASSPATH
and LD_LIBRARY_PATH.
Some variables are set Unset TNS_ADMIN, ORA_NLS, and
LD_BIND_NOW.
Cannot access /etc/oratab Grant read permission on
/etc/issue to the current user.
</PRE>
Rule [ 67 ]: DNS Lookup
~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the host is properly registered in the DNS.
Test [ FAILED ] :
nslookup IP_address = Host correctly registered in DNS
Action:
Refer to the following table for the necessary action to take:
<PRE>
Return Value Action
nslookup host.domain The DNS server failed to resolve the
nslookup using host.domain.
nslookup IP_address The DNS server failed to resolve the
nslookup using IP address.
Cannot determine IP address Fix any problem with host IP address.
Cannot access Grant execute permission on
/usr/bin/nslookup /usr/bin/nslookup to the current
user.
</PRE>
Rule [ 68 ]: /etc/hosts format
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if /etc/hosts file contains a line with "ip_address
fully_qualified_hostname short_hostname".
Test [ PASSED ] :
Contains host.domain = Contains host.domain
Action:
The Fuly Qualified Domain name has been set correctly.
Rule [ 69 ]: Oracle Home length
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check that the path to the Oracle home directory is not longer than
127 characters.
Test [ PASSED ] :
Less than 127 char = Less than 127 char
Action:
Oracle Home directory is not longer than 127 characters.
Rule [ 70 ]: Memory for Dev Kit
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough memory to install Developer Kits
install type. The minimum requirements is 256 MB.
Test [ PASSED ] :
Available = Available
Action:
The machine has enough memory to install J2EE & Webcache install type.
Rule [ 71 ]: Memory for BI&Forms
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough memory to install Business
Intelligence & Forms install type. The minimum requirements is 1 GB.
Test [ PASSED ] :
Available =~ Available|Install type not available
Action:
The machine has enough memory to install Business Intelligence & Forms
install type.
Rule [ 72 ]: Space for BI&Forms
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the machine has enough disk space to install Business
Intelligence & Forms install type. The minimum requirements is 2 GB.
Test [ PASSED ] :
Available =~ Available|Install type not available
Action:
The machine has enough disk space to install Business Intelligence &
Forms install type.
Rule [ 73 ]: control-center
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the minimum required control-center package version is
installed. For RedHat AS/ES 4.0: control-center-2.8.0-12.
Test [ PASSED ] :
Adequate =~ Adequate|Not required
Action:
The required compat-db package version or higher is installed.
Rule [ 74 ]: xscreensaver
~~~~~~~~~~~~~~~~~~~~~~~~~
Description:
Check if the minimum required xscreensaver package version is
installed. For RedHat AS/ES 4.0: xscreensaver-4.18-5.rhel4.2.
Test [ PASSED ] :
Adequate =~ Adequate|Not required
Action:
The required compat-db package version or higher is installed. -
Portal30 Installation/configuration problems.
Subject: Portal30
Please share your solution in installing th Oracle Portal 3.0 (included in Oracle 9iAS installation.).
I am facing problem in its installation on WINDOWS 2000 server.
The first time I installed the Oracle 9iAS 1.0.2, the Portal30 and Portal30_sso were started . however while trying to configure the Porta-to-go I made some mistakes (What is to be given in the HTTP and HTTPS ports for the Web Integration developer preferences configuration and what is to be given in the settings of Web Integration Server at HTTP/HTTPS Port, User, etc.??).
Then I made mistake in uninstalling the 9iAS as I straightaway started the Universal Installer for deinstallation without first uninstalling the forms server, report server , etc, using oracle installer, then uninstalling the Portal30 7 Porta30_sso.
Any way I removed all the entries from the registry and also removed the directories from the disk.
When I started my installation for 9iAS database cache and Web cache configuration failed. But Portal 30 showed successfull . However there were some error messages dispalyed during the configuration of Portal30 as below:
loading org/w3c/dom/html/HTMLHeadingElement
Error while loading
org/w3c/dom/html/HTMLHeadingElement
ORA-29506 invalid query derived from using clause.
ORA-00942 table or view does not exist.
Error while accessing MD5 table.
When I did the other post installation configuration and tried to access the Portal30 home page error message as below was displayed :
call to WPG_SESSION failed.
error code 4068
Database login failed. TNS is unable to connect to destination. Invalid TNS address
supplied or destination is not listeneing.
The problem could be due to in correct TNS String or it may be due to Listener not started or due to underlying network.
I checked everything. Listener was started, TNS service name was correct (in the ORACLE_HOME of 9iAS \network\admin directory) and the underlying network was proper. DAD parameters were also correct.
However, when I checked the PWG_SESSION PACKAGE BODY status It was showing INVALID. When I checked the installation log..it showed error messages like table MD5 not found...
I am unable to configure my PORTAL30..Please help...or where can I get the solution...
Thanks with regards
Riant.
nullSubject: Portal30
Please share your solution in installing th Oracle Portal 3.0 (included in Oracle 9iAS installation.).
I am facing problem in its installation on WINDOWS 2000 server.
The first time I installed the Oracle 9iAS 1.0.2, the Portal30 and Portal30_sso were started . however while trying to configure the Porta-to-go I made some mistakes (What is to be given in the HTTP and HTTPS ports for the Web Integration developer preferences configuration and what is to be given in the settings of Web Integration Server at HTTP/HTTPS Port, User, etc.??).
Then I made mistake in uninstalling the 9iAS as I straightaway started the Universal Installer for deinstallation without first uninstalling the forms server, report server , etc, using oracle installer, then uninstalling the Portal30 7 Porta30_sso.
Any way I removed all the entries from the registry and also removed the directories from the disk.
When I started my installation for 9iAS database cache and Web cache configuration failed. But Portal 30 showed successfull . However there were some error messages dispalyed during the configuration of Portal30 as below:
loading org/w3c/dom/html/HTMLHeadingElement
Error while loading
org/w3c/dom/html/HTMLHeadingElement
ORA-29506 invalid query derived from using clause.
ORA-00942 table or view does not exist.
Error while accessing MD5 table.
When I did the other post installation configuration and tried to access the Portal30 home page error message as below was displayed :
call to WPG_SESSION failed.
error code 4068
Database login failed. TNS is unable to connect to destination. Invalid TNS address
supplied or destination is not listeneing.
The problem could be due to in correct TNS String or it may be due to Listener not started or due to underlying network.
I checked everything. Listener was started, TNS service name was correct (in the ORACLE_HOME of 9iAS \network\admin directory) and the underlying network was proper. DAD parameters were also correct.
However, when I checked the PWG_SESSION PACKAGE BODY status It was showing INVALID. When I checked the installation log..it showed error messages like table MD5 not found...
I am unable to configure my PORTAL30..Please help...or where can I get the solution...
Thanks with regards
Riant.
null -
Oracle installation on AIX with existing instances
Hi,
I would like to know if there is a procedure document which can explain the installation of Oracle 9.2 on AIX platform of a host, where there are 3 instances of DB already existing.
Do I need to run 'rootpre.sh' before I execute runinstaller?
What precautions that I need to take care? I am worries if I do any new environment variables setup that may disturb the existing instances of SAP R/3/oracle.
Thanks,
Ramesh.see also this SAP note beside the SAP note 98252.
21960 - Several instances/systems on one UNIX computer
You need to execute rootpre.sh once per host.
Best regards
Baran -
Dear all,
I'm trying to install CRM 2011 on a Windows 2008 R2 Standard 64bit system. SQL server 2008 R2 and reporting services are also installed on the same machine.
During the installation I got the following errormessage: "Microsoft.Crm.Setup.Server.ProvisionBusinessAction failed. Could not find GUID for server:
<servername>"
The installation account has full control over the Domain OU.
Does anybody experience familiar issue? Do you have any hint/tip/solution?
Thanks in advanceNaveedI manage to install CRM reporting Extension by using the domain account as Service Account in Reporting services but now I am getting error while
importing CRM 4.0 to 2011 as below
00:33:36|Verbose| DatabaseAction execution time; Bin\Microsoft.Crm.Setup.DiffBuilder.dll:InstallStoredProcedure; 00:00:00.5154897
00:33:36|
Info| Install fn_UserSharedAttributeAccess function in MSCRM
00:33:36|Verbose| DatabaseAction execution time; Bin\Microsoft.Crm.Setup.DiffBuilder.dll:InstallStoredProcedure; 00:00:00.0312418
00:33:36|
Info| Update partner authentication auditing fields.
00:33:36|Verbose| Upgrading schema for 10 custom entities.
00:33:36|Verbose| Upgrading schema for custom entity 'mssp_resource_dealcategory'.
00:33:36|Verbose| Upgrading schema for custom entity 'mssp_resource_salesstage'.
00:33:36|Verbose| Upgrading schema for custom entity 'new_projects'.
00:33:39|
Info| CrmAction execution time; UpgradeDatabaseAction; 00:05:43.0571924
00:33:39|
Error| Installer Complete: OrganizationUpgrader - Error encountered
00:33:39|
Error| Exception occured during Microsoft.Crm.Tools.Admin.OrganizationUpgrader: Action Microsoft.Crm.Tools.Admin.UpgradeDatabaseAction failed.
InnerException:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Crm.CrmSecurityException:
Could not find GUID for server ---> System.DirectoryServices.ActiveDirectory.ActiveDirectoryObjectNotFoundException: Global catalog not found in forest "AX1.local".
at System.DirectoryServices.ActiveDirectory.GlobalCatalog.FindOneInternal(DirectoryContext context, String forestName, String siteName, LocatorOptions flag)
at Microsoft.Crm.SecurityUtils.GetGuidFromServerName(String serverName)
--- End of inner exception stack trace ---
at Microsoft.Crm.SecurityUtils.GetGuidFromServerName(String serverName)
at Microsoft.Crm.SecurityUtils.GetLocalSystemGuid()
at Microsoft.Crm.Caching.OrganizationSettingsCacheLoader.LoadCacheData(Guid key, ExecutionContext context)
at Microsoft.Crm.Caching.ObjectModelCacheLoader`2.LoadCacheData(TKey key, IOrganizationContext context)
at Microsoft.Crm.Caching.CrmMultiOrgCache`2.CreateEntry(TKey key, IOrganizationContext context)
at Microsoft.Crm.Caching.CrmMultiOrgCache`2.LookupEntry(TKey key, IOrganizationContext context)
at Microsoft.Crm.Metadata.LocalizationHelper.GetLabelsForResource(String resourceName, Guid objectId, String objectColumnName, LabelTypeCode labelTypeCode, String collectionName, String labelName, IOrganizationContext context)
at Microsoft.Crm.DataUpgrade.PartnerAuthenticationAuditingFieldsUpgrade.CreateAuditAttribute(MetadataBusinessEntity entity, String attributeName, MetadataHelper metadataHelper, ExecutionContext context)
at Microsoft.Crm.DataUpgrade.PartnerAuthenticationAuditingFieldsUpgrade.CreateAuditingFields(MetadataBusinessEntity entity, MetadataHelper metadataHelper, ExecutionContext context)
at Microsoft.Crm.DataUpgrade.PartnerAuthenticationAuditingFieldsUpgrade.UpgradeImpersonationAuditingFields()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Crm.Setup.Database.DllMethodAction.Execute()
at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
at Microsoft.Crm.Tools.Admin.InstallDatabaseAction.Do(IDictionary parameters)
at Microsoft.Crm.Setup.Common.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
InnerException:
Microsoft.Crm.CrmSecurityException: Could not find GUID for server ---> System.DirectoryServices.ActiveDirectory.ActiveDirectoryObjectNotFoundException:
Global catalog not found in forest "AX1.local".
at System.DirectoryServices.ActiveDirectory.GlobalCatalog.FindOneInternal(DirectoryContext context, String forestName, String siteName, LocatorOptions flag)
at Microsoft.Crm.SecurityUtils.GetGuidFromServerName(String serverName)
--- End of inner exception stack trace ---
Naveed -
ITunes 7.6 keeps running installation configuration on start
Whenever I start iTunes 7.6 the installation configuration box comes up.
It says: collecting the required information or something (my windows + itunes installation is in Dutch).
This happens every time I start iTunes.
Then when I go to the event viewer in Vista I see the following error message:
+Detection of product '{B85C4D19-6CEB-48CF-BD98-C887AC8C6F94}', feature 'iTunes', component '{1E8FB090-55AD-4B36-BF1D-F6EAA520797E}' failed. The resource 'HKEYCLASSESROOT\pcast\' does not exist.+
and
+Detection of product '{B85C4D19-6CEB-48CF-BD98-C887AC8C6F94}', feature 'iTunes' failed during request for component '{E8A1D3E2-F5D3-4B24-AB93-52F7E602A235}'+
Reinstalling or repairing the installation does not help.
The problems started since iTunes 7.6, prior to that version I had never experienced that issue before.
I am also getting several information messages in my Event viewer:
The description for Event ID 1903 from source HHCTRL cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
http://go.microsoft.com/fwlink?LinkID=45839This may be due to a problem with registry permissions, see this thread for discussion:
http://discussions.apple.com/message.jspa?messageID=5489263#5489263
It may also be possible to repair registry permission using the SubInACL tool as described on this web page.
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
I have not used it myself. -
I try to install it, but i select my free (fresh formated) partition with 35GB free space and i see:
Setup was unable to use existing system partition because it does now contain the required free space.
if i select partition with partition that does not contain the required i see
"Windows cannot be installed to Disk 0 Partition 1. (show details)"
so what is it? what can i test?
My Disk has 250GB, my partitions:
C: 8MB - Boot (7MB Free) - FAT
D: 37,5GB - WINXP (27,9GB Free space) - NTFS
E: 35,3GB - New (35,2GB Free) - NTFS - i want to install on it
F: 160GB - Data (6GB Free) - ntfskolorafa_ said:
I try to install it, but i select my free (fresh formated) partition with 35GB free space and i see:
Setup was unable to use existing system partition because it does now contain the required free space.
if i select partition with partition that does not contain the required i see
"Windows cannot be installed to Disk 0 Partition 1. (show details)"
so what is it? what can i test?
My Disk has 250GB, my partitions:
C: 8MB - Boot (7MB Free) - FAT
D: 37,5GB - WINXP (27,9GB Free space) - NTFS
E: 35,3GB - New (35,2GB Free) - NTFS - i want to install on it
F: 160GB - Data (6GB Free) - ntfs
Is this 8MB "Boot" partition (formatted as FAT???) something you created when you partitioned this disk for the Windows XP installation, or is this an 8MB OEM partition that you've somehow assigned drive letter C: to?
I wouldn't be surprised at all that your error message is being generated because thsi "BOOT" partition, labelled as drive C:, is only 8MB in size, and you can be absolutely positive that an 8MB partition is going to generate this error: "Setup was unable to use existing system partition because it does not contain the required free space."
The correct answer really depends on whether that drive C: is the boot (sic) (the proper terminology is to call it the system partition) partition for the Windows XP installation. If it is, then you're going to have some repair work to do on your Windows XP installation first, so that you can free up that 8MB partition.
In any event, I'm fairly certain that the solution is going to require the removal of that 8MB partition, as you've suggested in your most recent post.
Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009) -
Installation & configuration SRM MDM Catalog 3.0
Hello Everybody
I have SRM 7.0 ABAP & SRM 7.0 Java installed with different SID's.
Can anybody please tell me step by step installation & configuration SRM MDM Catalog 3.0 ?
I have referred note 1177779 & 1177780 .
Thanks,
PRYou can get it here:
https://sapmats-de.sap-ag.de/download/download.cgi?id=TX7G1TDRAETSXTLIICWNYGBHG9751YVJKY3NPP9WL9PEEZIXG5
The password for the file is:
TryMe1st -
Windows 7 installation disk doesn't exist?
Hey guys! I am using bootcamp for the first time on my 2011 macbook pro. I go to the bootcamp assistant, then from there I click continue and check off [Install Windows 7] and [Download the latest Windows support software from apple]. After this, I put a CD in to burn the latest windows software. From there, I then created a partition for windows which I put 100GB for out of my 500GB. I then clicked install but it said that my windows 7 installation disk didn't exist. I looked around for a while but then realized that my laptop never came with a windows 7 installation disk. Am I doing something wrong or do I have to go and buy one? Thanks for any help!
Ah that's what I thought. So, I would buy a windows 7 installation disk, put it in, then click install like I did?
-
Error: ORA-16532: Data Guard broker configuration does not exist
Hi there folks. Hope everyone is having a nice weekend.
Anyways, we have a 10.2.0.4 rac primary and a 10.2.0.4 standby physical standby. We recently did a switchover and the dgbroker files automatically got created in the Oracle_home/dbs location of the primary. Now need to move these files to the common ASM DG. For this, I followd the steps from this doc:
How To Move Dataguard Broker Configuration File On ASM Filesystem (Doc ID 839794.1)
The only exception to this case is that I have to do this on a Primary and not a standby so I am disabling and enabling the Primary(and not standby as mentioned in below steps)
To rename the broker configuration files in STANDBY to FRA/MYSTD/broker1.dat and FRA/MYSTD/broker2.dat, Follow the below steps
1. Disable the standby database from within the broker configuration
DGMGRL> disable database MYSTD;
2. Stop the broker on the standby
SQL> alter system set dg_broker_start = FALSE;
3. Set the dg_broker_config_file1 & 2 parameters on the standby to the appropriate location required.
SQL> alter system set dg_broker_config_file1 = '+FRA/MYSTD/broker1.dat';
SQL> alter system set dg_broker_config_file2 = '+FRA/MYSTD/broker2.dat'
4. Restart the broker on the standby
SQL> alter system set dg_broker_start = TRUE
5. From the primary, enable the standby
DGMGRL> enable database MYSTD;
6. Broker configuration files will be created in the new ASM location.
I did so but when I try to enable the Primary back I get this:
Error: ORA-16532: Data Guard broker configuration does not exist
Configuration details cannot be determined by DGMGRL
Form this link,(Errors setting up DataGuard Broker it would seem that I would need to recreate the configuration....Is that correct ? If yes then how come Metalink is missing this info of recreating the configuration... OR is it that that scenario wouldnt be applicable in my case ?
Thanks for your help.Yes I can confirm from the gv$spparameter view that the changes are effective for all 3 instances. From the alert log the alter system didnt throw u pany errros. I didnt restart the instances though since I dont have the approvals yet. But I dont think thats required.
Maybe you are looking for
-
Short Text and Long Text for WBS
HI All, I am working on Interface Project where I need to enter Short description and long text for a WBS with external text. Let me know if any FM Module is exist for same where I can Put this Short Description and Long Text seprately for a WBS Elem
-
Question about Folders & Files
I always set up a new folder for each project. In iM4... in the main folder are other folders - Audio Waveforms... Media... Shared Movies... and a QT.mov. In iM HD... all I have in the main folder is an icon with a star. Everything works O K and burn
-
Creating an Architecture Document For a Portal
I have been asked to come up with an Architecture Document for a public facing SharePoint 2010 site. I am familiar with the SharePoint 2010 technologies, however I need a starting point on where and how to start the Architecture document. Is there
-
Panel between Filmstrip and Viewer missing
Hey all! I have Lightroom 4.0, and I'm editing pictures, but I have come to notice that the panel between the Filmstrip and the Viewer is missing. This was the panel that gave me the ability to check the "Show Mask Overlay" and set the Mask Pins to d
-
How to group and delete sections of emails at one time
I would like to be able to place seconds of emails together and delete them without having to delete each email one at a time, or to use ctrl and click and delete