IFolder Data Store Issue

iFolder 3.9? on OES11 SP1/SLES11 SP2. The ifolder data store is on a NAS via iscsi. This works until the nas "disappears" from the network and i have to hard-power down the nas. We do have a newer gigabit switch on the way but until then, i can not get the ifolder store to come back online. Here is what i use to have to do when this happened: logout of the iscsi via yast-iscsi. Restart the nas. Login using the iscsi initiator via yast. Run xfs_repair -L then restart the server. this would usually work but now, i can not get anything to work. fdisk -l shows the dev:
Code:
Disk /dev/sdd: 1610.6 GB, 1610612737024 bytes
255 heads, 63 sectors/track, 195812 cylinders, total 3145728002 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 524288 bytes
Disk identifier: 0x00095eaa
Device Boot Start End Blocks Id System
/dev/sdd1 1024 3135326207 1567662592 83 Linux
SDD1 will mount and i can see all the files/folders in the data store. Partitioner sees the iscsi drive.Logs from simias:
Code:
2013-08-10 08:08:54,793 [-1443309824] ERROR Simias.LdapProvider.User - DN:cn=user,ou=Paradix,o=TNNDS
2013-08-10 09:43:49,792 [-1451780352] ERROR Simias.LdapProvider.User - LdapError:Anonymous bind is not allowed
2013-08-10 09:43:49,793 [-1451780352] ERROR Simias.LdapProvider.User - Error:Inappropriate Authentication
2013-08-10 09:43:49,793 [-1451780352] ERROR Simias.LdapProvider.User - DN:cn=user,ou=Paradix,o=TNNDS
Edirectory is up and running. Any ideas on how i can get ifolder back up and running?

carnold6,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

Move ifolder data store

As I understand it, I need to add the data store in the ifolder adminUI. Move the data from the existing data store and restart ifolder. Can anyone confirm this process (not in that exact order)? Ifolder 3.8 I believe (installed from the sles11 sp2/OES sp1 disc) and want to move the store to a nas that supports smb, cifs, nfs and afp file protocols. Anybody see any potential problems with this?

From the lack of responses, i guess either this cant be done or i am missing something?
I will say, i tried this approach and it looks like folder will not accept smb://nas/share/path/to/data
Am i doing this the right way or will ifolder not work this way?

TT Issue "9994 Loading data store from disk into RAM in progress"

Getting this strange issue. Sometimes (2-3 times a day) TT just becomes unavailable and when trying to connect to it getting "9994 Loading data store from disk into RAM in progress".
Any advise on what the root cause for this behavior might be?

In all likelihood this is exactly what it sounds like - your datastore is being reloaded from disk into memory. Connections can't be completed until the datastore has gone through recovery and is fully in-memory. You need to look back through your ttmesg.log files and find out why the datastore was taken out of memory in the first place. Possibly there's been a crash and it has been invalidated, meaning it needs to be recovered from the checkpoint files and transaction logs. Or maybe there were no user connections and it was taken out of memory and checkpointed to disk in a normal, controlled fashion. The ttmesg.log files will tell you what happened.

Error 25109 : The install program could not create the config data store. Is this a know issue with a solution?

Hi I cant install the Management Console.
I keep getting
Error 25109 : The installation program could not create the configuration data store. Please see the installation log for more info.
Has someone come across this problem before?
I am using
MS Server 2008 Std x86
SQL Server 2005 SP2 Std x86
MDOP 2008 R2
APP-V 4.5
Please can someone help.
Thanks

I'm running into the same problem myself, I have an almost identical setup.
Trying to do a clean install of App-V Management Server 4.5 from the MDOP 2008 R2 CD.
Server OS: Windows Server 2008 Enterprise SP1 (Has WDS and IIS installed (IIS 6 Management Compatibility too), as well as .Net 3.5 SP1 Framework)
Database: Microsoft SQL Server 2005 Enterprise (Version 9.00.3068.00) (Note: SQL server is running on a different server than the server App-V is being installed on.)
Installer gets to the point where it starts creating the database than dies, reporting a 25109 error.
Checked out the logfile the installer created, here's a snip of the last few lines before is starts rolling back the install:
1
[2008-12-23 15:58:35] (2284:3084) SQL state: ``01000'', Native: 0, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]<<< CREATED TRIGGER dbo.TR_U_SYSTEM_OPTIONS >>>''.
2
[2008-12-23 15:58:36] (2284:3084) SQL state: ``42000'', Native: 18058, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]Failed to load format string for error 16873, language id 1033.  Operating system error: 122(The data area passed to a system call is too small.). Check that sqlevn70.rll is installed in C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\Resources\1033, where 1033 is the language ID of US English, or the appropriate folder for the locale in use. Also check memory usage.''.
3
[2008-12-23 15:58:36] (2284:3084) SQL state: ``01000'', Native: 3621, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.''.
4
[2008-12-23 15:58:36] (2284:3084) ::SQLExecDirectW error 0xffffffff.
5
[2008-12-23 15:58:36] (2284:3084) Failed to execute SQL ``/* ------------------------------------------------------------------------- *\
6
    Copyright (c) Microsoft Corporation.  All rights reserved.
7
8
    Description:
9
        This script creates all user-defined messages.
10
11
        The types of messages allowed (and their severities) are:
12
        FATAL   - SQL Server Severity = 17; ours = 1
13
        ERROR   - SQL Server Severity = 16; ours = 2
14
        WARNING - SQL Server Severity = N/A; ours = 3
Can anyone help me shed some light on what's going on here?

Error while activating Data Store Object

Hi Guru's,
When I try to activate a data store object i get the error message :
     The creation of the export DataSource failed
     No authorization to logon as trusted sys tem (Trusted RC=2).
     No authorization to logon as trusted sys tem (Trusted RC=2).
     Error when creating the export DataSource and dependent      Program ID 4SYPYCOPQ94IXEGA3739L803Z retrieved for DataStore object ZODS_PRA

Hi,
you are facing a issue with your source system 'myself', check and repair it. Also check if the communication user (normally ALEREMOTE) has all permissions needed.
kind regards
Siggi

703: Subdaemon connect to data store failed with error TT9999

All,
I'm getting the following error whilst trying to connect to a TimesTen DB:
connect "DSN=my_cachedb";
703: Subdaemon connect to data store failed with error TT9999
In the tterrors.log:
16:39:24.71 Warn: : 2568: 3596 ------------------: subdaemon process exited
16:39:24.71 Warn: : 2568: 3596 exited while connected to data store '/u01/ttdata/datastores/my_cachedb' shm 33554529 count=1
16:39:24.71 Warn: : 2568: daRecovery: subdaemon 3596, managing data store, failed: invalidate (failcode=202)
16:39:24.71 Warn: : 2568: Invalidating the data store (failcode 202, recovery for 3596)
16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Could not send 'manage' request to subdaemon rc -2 err1 703 err2 9999
16:39:24.72 Warn: : 2568: 3619 Subdaemon reports creation failure
16:39:24.72 Err : : 2568: TT14000: TimesTen daemon internal error: Deleting 3619/0x1558650/'/u01/ttdata/datastores/my_cachedb' - from association table - not found
16:39:24.72 Err : : 2568: TT14004: TimesTen daemon creation failed: Could not del from dbByPid internal table
16:39:24.81 Warn: : 2568: child process 3596 terminated with signal 11
16:39:25.09 Err : : 2568: TT14000: TimesTen daemon internal error: daRecovery for 3619: No such data store '/u01/ttdata/datastores/my_cachedb'
I've checked and the datastore does exist and is owned by the timesten UNIX user.
ttversion:
TimesTen Release 11.2.2.2.0 (64 bit Linux/x86_64) (tt1122:53396) 2011-12-23T09:26:28Z
Instance admin: timesten
Instance home directory: /home/timesten/TimesTen/tt1122
Group owner: timesten
Daemon home directory: /home/timesten/TimesTen/tt1122/info
PL/SQL enabled.
Datastore definition from sys.odbc.ini:
[my_cachedb]
Driver=/home/timesten/TimesTen/tt1122/lib/libtten.so
DataStore=/u01/ttdata/datastores/my_cachedb
LogDir=/u01/ttdata/logs
PermSize=40
TempSize=32
DatabaseCharacterSet=AL32UTF8
OracleNetServiceName=testdb
Kernel parameters from sysctl -a:
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
Memory / SWAP:
MemTotal: 2050784 kB
SWAP: /dev/mapper/VolGroup00-LogVol01 partition 4095992
I'm new to TimesTen and I'm planning on evaluationg it to see if it could solve an issue we're having. Any suggestions would be much appreciated.
Thanks,
Ian.

Hi Ian,
Can you please answer the following / provide the following information:
1. What are your kernel parameters relating to semaphores set to? Is anything else on the mahcine using significant numbers of semaphores?
2. Please provide the output of the following shell commands:
ls -ld /u01
ls -ld /u01/ttdata
ls -ld /u01/ttdata/datastores
ls -ld /u01/ttdata/logs
3. Please provide an excerpt of the detailed message log (ttmesg.log) between around 16:38 and 16:40 (i.e. from a little while before the problem until after the problem).
Thanks,
Chris

Connecting to AOP data store with multiple NIC's

I have a situation where I need to have the computer running Diadem to be connected to two different networks. I have two NIC's installed in the machine, NIC A and NIC B, we will call them. The reason for this, is that I am using Diadem to access an AOP server on an AVL PUMA machine. If I connect PUMA to the LAN, PUMA occasionally crashes, probably something to do with the IP address. So, PUMA needs to be on a network that does not have a router. My diadem computer needs to communicate with PUMA, and with the local shared drives on our company network.
Anyway, I have the company LAN hooked up on NIC A, and the PUMA network hooked up on NIC B. Diadem fails to connect when both networks are connected, but connects to the data store no problem when only the PUMA network is hooked up. Any ideas how to fix this? It seems diadem is looking at NIC A instead of NIC B, like it should be.
For reference, when both NIC's are hooked up, I can access share drives, and ping computers on both separate networks, without a problem, so it's not a connection issue.
Any help would be appreciated.
-Russ
Solved!
Go to Solution.

I assume poth NIC have different IP range.
- Did you use IP instead of server name.
- Do you use RPC or CORBA to access the PUMA server?
- Which DIAdem version.
Can you create a logfile when the connection fails?
Greetings
Andreas

R/3 User Data store in Portal....?

Hi All,
Can anybody tell me what is the necessity of using R/3 as a user data store (UME) in Portal ?
What are advantages of it over Portal UME ? In what scenarios can we use R/3 as a user datastore in Portal and how can we make well advantage of it ?
Any help in this regards would be highly appreciated. Full points would be rewarded for usefull answers.
Regards,
Anil Kumar

Hi,
Imagine a scenario when most users need data only from r/3 what a bother replicating same users again in Portal - Look at it from administration point of view! and role assignment in sap backend , so many issues.
Consider that you have built a huge list of users, then you add Portal. How tough to keep portal user profile uptodate with backend.
This is an important reason in my view, single storage of users - optimum use of database space and efficieny and administrative conveniency.
Regards,
Harish

Cannot attach data store shared-memory segment using JDBC (TT0837) 11.2.1.5

Hi,
I found the thread Cannot attach data store shared-memory segment using JDBC (TT0837) but it can't help me out.
I encounter this issue in Windows XP, and application gets connection from jboss data source.
url=jdbc:timesten:direct:dsn=test;uid=test;pwd=test;OraclePWD=test
username=test
password=test
Error information:
java.sql.SQLException: [TimesTen][TimesTen 11.2.1.5.0 ODBC Driver][TimesTen]TT0837: Cannot attach data store
shared-memory segment, error 8 -- file "db.c", lineno 9818, procedure "sbDbConnect"
at com.timesten.jdbc.JdbcOdbc.createSQLException(JdbcOdbc.java:3295)
at com.timesten.jdbc.JdbcOdbc.standardError(JdbcOdbc.java:3444)
at com.timesten.jdbc.JdbcOdbc.standardError(JdbcOdbc.java:3409)
at com.timesten.jdbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:813)
at com.timesten.jdbc.JdbcOdbcConnection.connect(JdbcOdbcConnection.java:1807)
at com.timesten.jdbc.TimesTenDriver.connect(TimesTenDriver.java:303)
at com.timesten.jdbc.TimesTenDriver.connect(TimesTenDriver.java:159)
I am confused that if I use jdbc, there is no such error.
Connection conn = DriverManager.getConnection("url", "username", "password");
Regards,
Nesta

I think error 8 is
net helpmsg 8
Not enough storage is available to process this command.
If I'm wrong I'm happy to be corrected. If you reduce the PermSize and TempSize of the datastore (just as a test) does this allow JBOSS to load it?
You don't say whether this is 32bit or 64bit Windows. If it's the former, the following information may be helpful.
"Windows manages virtual memory differently than all other OSes. The way Windows sets up memory for DLLs guarantees that the virtual address space of each process is badly fragmented. Other OSes avoid this by densely packing shared libraries.
A TimesTen database is represented as a single contiguous shared segment. So for an application to connect to a database of size n, there must be n bytes of unused contiguous virtual memory in the application's process. Because of the way Windows manages DLLs this is sometimes challenging. You can easily get into a situation where simple applications that use few DLLs (such as ttIsql) can access a database fine, but complicated apps that use many DLLs can not.
As a practical matter this means that TimesTen direct-mode in Windows 32-bit is challenging to use for those with complex applications. For large C/C++ applications one can usually "rebase" DLLs to reduce fragmentation. But for Java based applications this is more challenging.
You can use tools like the free "Process Explorer" to see the used address ranges in your process.
Naturally, 64-bit Windows basically resolves these issues by providing a dramatically larger set of addresses."

Error when adding multiple source data stores in ODI Interface

I am trying to create an ODI Interface with couple of source tables and one target table. Say for example I am using the following data structure in my target table.
Order (Target Table)
order id
product id
customer id
address id
warehouse id
shipment id
for the above target table i need to extract data from each of the following source tables.
orderitem
product
customer
address
warehouse
shipment
Total 6 source tables i need to join however and load data for target table.
When I drag source data stores in to ODI interface mapping tab It throws the following Null Pointer Error. Due to this error I am not able to map target table with all the source tables.
Please suggest me what could be the reason for the error.
Error:
java.lang.NullPointerException
     at oracle.odi.interfaces.interactive.support.clauseimporters.ClauseImporterDefault.importClauses(ClauseImporterDefault.java:81)
     at oracle.odi.interfaces.interactive.support.actions.InterfaceActionAddSourceDataStore.performAction(InterfaceActionAddSourceDataStore.java:124)
     at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:845)
     at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:821)
     at oracle.odi.ui.OdiSdkEntityFactory.dropSourceDataStore(OdiSdkEntityFactory.java:523)
     at oracle.odi.ui.etlmodeler.diag.dragdrop.DiagramNodeDropHandler.dropObjects(DiagramNodeDropHandler.java:150)
     at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.dropSelected(DelegateChooserDropHandler.java:386)
     at oracle.modeler.dnd.ModelerTCDropHandler.access$001(ModelerTCDropHandler.java:69)
     at oracle.modeler.dnd.ModelerTCDropHandler$3.run(ModelerTCDropHandler.java:288)
     at oracle.modeler.dif.GraphicAdder.addImpl(GraphicAdder.java:387)
     at oracle.modeler.dif.GraphicAdder.addAndLayoutImpl(GraphicAdder.java:372)
     at oracle.modeler.dif.GraphicAdder.addSelectAndLayout(GraphicAdder.java:348)
     at oracle.modeler.dnd.ModelerTCDropHandler.dropSelected(ModelerTCDropHandler.java:284)
     at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.drop(DelegateChooserDropHandler.java:150)
     at oracle.diagram.framework.dragdrop.DefaultDropPlugin.drop(DefaultDropPlugin.java:115)
     at oracle.modeler.dnd.ModelerDropPlugin.drop(ModelerDropPlugin.java:100)
     at oracle.diagram.framework.dragdrop.DropTargetHelper.drop(DropTargetHelper.java:188)
     at oracle.diagram.framework.dragdrop.ManagerViewDragAndDropController$MyDropTargetListener.drop(ManagerViewDragAndDropController.java:802)
     at java.awt.dnd.DropTarget.drop(DropTarget.java:434)
     at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:519)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:832)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:756)
     at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:30)
     at java.awt.Component.dispatchEventImpl(Component.java:4487)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:4312)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4163)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

Hello,
does somebody have a solution for this issue?
I am new to ODI and have the same problem. I am using ODI Designer Standalone Edition Version 11.1.1.
Maybe there is something wrong with my configuration, maybe I am doing something wrong while creating the mapping graphically. It does not help to save and re-open the mapping. Also it does not help to re-reverse engineer the objects. Also it does not seem to have something to do with the number of objects joined (some objects seem to always cause this error, with some the error starts when there are 10 or more objects on the map before they are added).
One possible workaround i have found is to do it all on the quick-edit tab by one by one creating the joins and mappings (+source or lookup joins and filter mapping). It seems to work with my configuration, but drag&drop functionality on the mapping tab would sometimes be faster, more convenient and just more human like.
Br,
Jaanus

Generic LDAPv3 data store help

hey,
We are running Access Manager 7.1 patch 1 on Sun App Server 8.2/Solaris 10 sparc. We are receiving the following error in the console when we try to add a Generic LDAPv3 data store:
"The attribute name sun-idrepo-ldapv3-ldapv3Generic does not match the service schema"
the console error log says:
"2008-10-01 10:00:50" "/|testldap|The attribute name sun-idrepo-ldapv3-ldapv3Generic does not match the service schema" amConsole.error CONSOLE-644 dc=example,dc=com e4a92e04b361e73401 SEVERE id=amadmin,ou=user,dc=example,dc=com XX.XX.XX.XX "cn=dsameuser,ou=DSAME Users,dc=example,dc=com" amhostany ideas on the issue?

SysHex wrote:
Hi there
Using AM7.1 RTM
Been having a bit of trouble configuring a Data Store for Active directory. I actually got it working, just not the way I want it to work.
I got an LDAP tree in this AD that looks somewhat like this :
dc=company
ou=section1,dc=company
ou=section2,dc=company
ou=users,ou=section1,dc=company
ou=users,ou=section2,dc=company
inside each ou=users I got several users such as :
cn=aaa1,ou=users,ou=section1,dc=company
cn=aaa2,ou=users,ou=section1,dc=company
cn=aaa3,ou=users,ou=section1,dc=company
and
cn=bbb1,ou=users,ou=section2,dc=company
cn=bbb2,ou=users,ou=section2,dc=company
cn=bbb3,ou=users,ou=section2,dc=company
What I'm looking for is to configure a DataStore that has all these users in it.
I have managed to create a data store that contains wither all users in section1 or all users in section2 , but no datastore with all users from section1 and section2.
When I use
LDAP Organization DN: ou=section2,dc=company
or
LDAP Organization DN: ou=section1,dc=company
and
LDAP People Container Naming Attribute : ou
LDAP People Container Value: users
I get the users from each of the sections.
So, till here everything is working the way it should.
Now Trying to configure the Datastore to contain the users of both I do
LDAP Organization DN: dc=company
and I set
LDAPv3 Plug-in Search Scope: SCOPE_SUB
if you do the ldapsearch for the same scope and basedn with bind DN , doe it return any result?
>
and it doesn't show any of the users.
Am I doing anything wrong?
Thanks for your helpwhat is your use case? if you are going to do mostly read/search/mod/del operation then you can create 2 datastore instances one pointing to section1 and the other pointing to section2
Rp

Timestamp in Data Store defaults to Logical Length of 13

I inserted a data store in designer, the table has fields that are TIMESTAMP(6) WITH TIMEZONE
The Data Store column Logical Length defaults to 13.
The execution fails with ORA-30088 because the temp table ddl is TIMESTAMP(13) WITH TIMEZONE
I fixed the issue by changing the 13 to 6 on each column.
What I want to know is how can I change the default to 6?
Or why is ODI not picking it up properly?
Is there a fix for this?

Hi,
Goto Topology ------> Physical architecture-----> Oracle ----> expand data types and edit TIMESTAMP WITH TIME ZONE
See if the following are specified against "Create Table Syntax" and " Writable Datatype Syntax"
TIMESTAMP(%L) WITH TIME ZONE
if yes , then edit the same and remove (%L) from it .
i.e. it will become TIMESTAMP WITH TIME ZONE
Save it and execute your interface .
Thanks,
Sutirtha

Error during retrieval of the logon data store

Hi guys,
well after checking and changing RFC-Destination we are not able to resend stucked data in Monitor. We still get the error Error during retrieval of the logon data store
What can we do to solve the issue?!
br

Hi, well we did this and got:
if_http_client send http_communication_failure
Therefore i checked SM59 INTEGRATION_DIRECTORY_HMI and the user-pw was invalid?! How comes?!
We changed it, new cache refresh - but still we are not abel to resend the messages!
br
Edit:
in Monitor we get this error:
+ <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with Q01CLNT100 System-dependent data for entry /RFC/Q01CLNT100 ch FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 /> +
Seems to me like role problems we once solved!

Data Store Error Exit Code 3

Hi all,
One of the data stores that I am using constantly encounters an intermittent error which causes the data store to go down before Endeca Server restarts the data store automatically and restore access to the data store. This also causes the access to the studio page to be affected as well. I am wondering if anyone has encountered similar issues like this and perhaps has a fix for this issue? The error code that is shown on Endeca Server is as below:
"[Process watcher for 'DataStore']WARN [DGraph] 'DataStore' data store process ended with exit code 3. Automatically restarting."

Andrassy it appears that your current User account's file permissions have become compromised for the C:\Program Files (x86)\Adobe\Adobe InDesign CS5 folder. Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your file permissions.

Backing up ifolder data to NAS using rsync comand

Been using rsync to backup users NSS volumes to local NAS with shares on it. Command I use is:
rsync -ahz --delete-after --stats /local path /mnt/path
mounting NAS to local mount point first beforehand, then using rsync to copy the data. Customer had question since he wasn't backing up ifolder data to it. Modified script to backup local path /ifolder/data/simias to get all files and subdirectories underneath. It worked fine, but it doesn't appear to backup the path /ifolder/data/simias/SimiasFiles directory. Tried running command just to backup that particular directory, and it appear to run, but no data shows up on NAS. Could it be something I am missing in this in getting this to copy the data over correctly?

jlewter,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

IFolder Data Store Issue

Similar Messages

Maybe you are looking for