IllegalArgumentException when going to connected status

My MIDlet works beautifully inside the Palm emulator. It makes an HTTP request to my servlet, and correclty handles the binary data it gets back, using HttpConnection.openInputStream().
However, when I run the same MIDlet from my Visor Neo (after first establishing an internet connection), the first "getXxx()" call I make results in an IllegalArgumentException. (I have confirmed that HTTP communications are working between the Visor and my servlet by browsing to my servlet from an HTML browser on the Visor and viewing the HTML sent by my servlet.)
I am still waiting on the Visor ROMs for the emulator from Handspring to see if the problem is with Handspring's version of PalmOS 3.5, but I'm hoping it isn't the Visor.
-k

Operator brain damage!! The visor is working fine, I just didn't have it configured correctly! Sorry everyone.
-k

Similar Messages

Problem when going to connect Oracle 9.2.0 + Linux RedHat 7.3

SQL> Connect system
Enter Password: ******
ERROR:
ORA-01034: Oracle not Available
ORA-27101: Share memory realm does not exists
Linux Error: 2: No such file or Directory
Can anybody tell me how I can solve this problem?
Thanks in advance.

Did you check to make sure that your environment variables are set correctly?
Is LD_LIBRARY_PATH set correctly?
Look at http://www.puschitz.com/OracleOnLinux.shtml for pointers to successful install.
I was able to install Oracle 9.2 in RedHat 7.3 without these issues. It may just be missing or incorrectly set environment vairables.

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

I am having issues with my iphone6 bluetooth connection in my car. When going to settings under bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution yet?

I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class. When going to settings under Bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution from Apple yet?

Hi susan from WSL,
Welcome to the Apple Support Communities!
I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article.
If you can’t use a Bluetooth accessory or car kit
Cheers,
Joe

When going to a website from the desktop I get the followi ng message. "There was a problem sending the command to the program" Even though I get this messge, it still connects with the website/

When going from the desktop to a website, I get the following message. "There was a problem sending the command to the program" Even though I get this message, I still connect to the website.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

When I wire connect my ipad to mac where the backup goes

When I wire-connect my ipad to my mac, iTunes opens up and it says along with other information that mac will back up my laptop. I wish to know where the Back up goes, I mean where my ipad informations are stored as back-up ?
Further, now I am going to wire-connect my iPhone to mac and I wish to transfer my iPhone photos to mac, since my iphone capacity is less. Please tell me how to transfer photos / albums from iPhone to mac when I am wire-connecting to mac.
Thanks in advance
Scy.ms

On a Mac, from http://support.apple.com/kb/HT4946, the backup is stored under :
Mac: ~/Library/Application Support/MobileSync/Backup/
Though you probably won't be able to make much, if any, sense of the files within that backup unless you restore it onto a device.
In terms photos, you should be able to copy those that you've taken with the phone to your Mac via Image Capture, Aperture and iPhoto.

Workflow status web part gives error when going back to previous stage (using GO TO) in Project Server 2013 workflow

Hi,
Workflow status web part gives error when going back to previous stage (using GO TO) transition activity in Project Server 2013 workflow.
Please guide how to create a workflow which restarts from a desired stage.

Thanks for your prompt reply....
It gives following error
Workflow Status
This Web Part was unable to load.
Information that may be useful in solving this problem was written to the Unified Logging Service (ULS) log on the Project Web App with the following ID: e95a9c9c-1f68-90d7-0a3e-5951df70fec6
For more information, contact your Project Web App administrator.
what do you mean to restart the Project Server 2013 with different project name, please elaborate....

HT1527 when attempting to connect to the itunes store, the status message says "accessing itunes store..." but never connects. how do i resolve this?

when attempting to connect to the itunes store, the status message says "accessing itunes store..." but never connects. how do i resolve this?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??

i have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??

dovdov2,
are you saying that when you connect your MacBook Pro to a monitor, your Internet connection slows down, but when you disconnect the monitor, it speeds up again, and that this is reproducible from one day to another?
Does this happen both under OS X and under Windows 7, or only under one of them?
How are you currently connecting your MacBook Pro to your monitor?

My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.

My computer can not recognize the new Apple iPod touch when it is connected via the USB cable (that goes with it) attempt to attach it to the computer.

You do have iTunes installed right?
See:
iOS: Device not recognized in iTunes for Windows

When my instructor app shares, my connectivity status changes to poor and her voice becomes sporadic

I am training to be an at-home rep and learning on-line through AdobeConnect. Whenever the instructor app shares with the client's application (through secure VPN and Citrix) the connectivity status bar swings between poor to excellent and much of the time I lose her voice. The IT Support has not been able to figure out why -- my PC and technical requirements all meet their standards. I doubled my broadband speed, but that also didn't solve the problem. Any help would be appreciated. I will have to drop out of training if I can't get this fixed soon. Rosie

I am having the same problem as the person above. I have been working with my DSL provider for 2 weeks and have been unable to find anything that is causing the latency problems (although my DSL service has improved overall with the changes that were made). When I connect via my Verizon aircard, everything works great, but I will rapidly start getting charged for data overages in a week.
Because the aircard worked great, this led me to believe it was a problem with my DSL connection. I have done trace routes and there is no consistent issue with slower ping times or packet loss. Yes, I get the occasional 200-250ms ping times on one hop, but that is not unusual due to the reduced priority on ping traffic (ICMP, I think). Anyway, then I learned that routes are not always symetrical and that the return path may be different than the outgoing or request path. And the return path seems to be where the issue is.
How can I work with someone to troubleshoot my return path from adobeconnect.com? Can someone do a traceroute to 68.22.72.67? That is the hop just before my router.
FYI, here is what else I have done to try to narrow down the problem:
- use aircard and it works perfect, but that uses a different path which leads me to believe the path is the issue
- turn off all other devices connected to the router
- trace routes, endless ping tests, pathping, speedtest.net, pingtest.net, all tested good
- bridge tap was removed lessening my distance to the CO from 9000 ft to 8000 ft
- replaced corroded connectors
- reprovisioned line to the red back (ATT's term)
- changed pair from the CO
- attempted adobe connect sessions on multiple computers with both Windows 7 and XP
- instructor reduced connection speed from LAN to DSL and reduced frame rate at my request with no change
- she records the classes and the recordings are perfect except for the times when the class pauses.
The latency I am experiencing is when she shares a screen and then it can go as high as 8s, but mostly it is between 2 and 4s. That is enough to make the audio completely drop out or it is just uninteligible with the short bursts that come out.
Please help. If you can help identify where the problem is in the return path, I will attempt to take it from there. Scott

Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

Hello,
I'm seeing an issue that started this past Monday with no recent change to our environment.
External Outlook Anywhere users and Mobile users, OWA users are unaffected.
Internal Users are affected when using Outlook of any version, 2010 or 2013.
-Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
1 . Using Cached Mode:
a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
on the workstations.
b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
The outlook icon in the system tray says "Outlook is requesting data from the server":
2. Using Non-cached mode
a. No Login Prompt at startup, business as usual
b. Free/Busy, Out of Office works fine. Autodiscover is fine.
c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random.
3. Lync Pop up for credentials often, though entering the password.
URLs are correct. Autodiscover, EWS, etc.
Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node.
Not sure what is going on.
Josh

You have a hybrid configuration with Office 365, right? You didn't provide this valuable piece of information.
In Exchange Online PowerShell run this command:
Get-OrganizationConfig | FL PublicFoldersEnabled
If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders. Be sure that you have legacy pubic folder interoperability properly configured.
http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Problem in creating DataServer   using SQL2008 connection status is ERROR

HI All
I am fairly new in SAP MII , and i have been trying to create new data server using MSSQL2008 which is on my laptop(local) and i access MII in web based form. the sap MII version is 12.1.5(Build99)
this what i did
1.I have   deployed   JDBC 3.0 driver   on system management   on SAP MII
2.When creating   the Data server   I have done the following   check below (screen dump)
Connector     IDBC
ConnectorID
ConnectorType     SQL
DatePrefix     '
DateSuffix     '
DaysRetention     7
Description     mii
Enabled     T
InitCommand
InternalDateFormat     yyyy-MM-dd HH:mm:ss
JDBCDriver     com.microsoft.sqlserver.jdbc.SQLServerDriver
MaxRetryCount     5
Name     tigo2
PoolMax     100
PoolSize     1
RetryInterval     60000
ServerPackage     com.sap.xmii.Illuminator.connectors.IDBC
ServerURL     jdbc:sqlserver://localhost:1433;databaseName=MII
Timeout     15
UseCount     256
UserName     sa
ValidationQuery     SELECT GETDATE()
WaitTime     30
3. I checked the connection of my server   in Management studio   which works fine
   checked the port , which is fine    and the firewall   exception changed it to   except SQL SERVER PORT 1433
but i still get the   connection status error:    tried locating   the logviewer to see what the problem is cant retrieve anything
Kindly guide me in the right path for im runnin out of ideas. I installed the JDBC driver on the laptop and made CLASSPATH to point to that folder STILL no luck.
and with regards to viewing the LOGviewer I truely have no IDea how to do that , I have tried to check on the forum   nothing helped.
Edited by: Tigomezge on Jun 21, 2011 3:19 PM

Tigo,
You can try this,
Install SQL Server Management Studio on MII server (where MII is installed, should already have one if you have installed NW on SQL DB, if not, install one) and then try to access DB installed on your laptop from there using the IP address (not local host).
If it works fine then atleast one thing can be confirmed that your DB is accessible outside of your laptop (means no TCP/IP or port or firewall issues).
Also, When you unzip the Driver exe file (i mean install), usually you will find 2 jar files,
1) sqljdbc.jar
2) sqljdbc4.jar
Use of these jar files purely depends on the Java installed on the system. refer to this link on more details:
[Choosing Right JAR File|http://msdn.microsoft.com/en-us/library/ms378422.aspx]
Let us know how it goes
Regards,
Adarsh
Edited by: Adarsh Sidnoor on Jun 22, 2011 7:37 PM

Open Process Orders take-over when going-live

Hello PP People
Does anyone have any experience/recommendation about the transition/take-over of open process orders from a legacy system to SAP when going live ?
These process orders are started in the legacy system and should arrive in a partially confirmed (hours/consumptions) status in the SAP system at go-live. How is this generally tackled from a CO point of view ?
Any hints on this could be helpfull
Thanks and best regards

Hi,
The method adopted depends on the business requirements. There are quite many options which can be adopted. So first thing i would say is get a clear business requirement what business expects from this migration.
Some of the options could be
1. Close all orders in the legacy system & create new orders in the SAP system & post back the confirmations, post goods movement as per the legacy system.
2. Create a material per order carrying the cost (WIP value) as per the legacy system, assign this component in the component list & post this mateiral to the order, thereby the WIP vlaue will be acrrued to the order.
3. Ask your FI-CO personnel to post the WIP value to the order from FI side.
There could be many more approaches, the choice depends purely on business needs. Hope the above gave you some guideline.
Regards,
Vivek

I need to be able to access a PDF document on my ipad when I am offline and save it to print later when I am connected to wi-fi. I can not figure out how to do this (to be accessible offline and saved). Please help.

I type notes between therapy sessions and frequently do this in my car without wifi available. I need a way to access PDF files that I can type in and save and be able to AirPrint from when I am connected to wifi at a later time, I currently have these documents saved in Dropbox and open them on my ipad or iPhone in Adobe Reader but don't have a way to save and use offline. I tried iBooks but it doesn't allow me to edit. I need specifics on how to do this please. I bought an ipad to make my mobile work easier but am still using my iPhone for everything because I can't figure how to easily access and edit PDF documents offline. Thanks in advance.

search the app store for PDF Writer. I've found a lot that will convert documents to PDF, but none yet that will write within the PDF. One thing you want to avoid are cloud based apps. Any of them that talk about editing on the cloud, etc, aren't going to be as standalone as you want.
It's possible, if you can take your template PDF, turn it into a word document that you can edit, you can then convert that to PDF...kinda a workaround way to do what you want. And apps that convert to PDF are much easier to find

IllegalArgumentException when going to connected status

Similar Messages

Maybe you are looking for