Im trying to download tv series, but the download fails with an error code. As directed, I tap to retry, but it continues to fail. What am I doing incorrectly?

Why is a tv show not downloading? I continue to get an error code and tap to try again.

I don't know if these are important or not, but I thought I would include them anyways.
Thanks again
Eli

Similar Messages

Can I connect a PS3 wirelessly using internet sharing from my ethernet-wired iMac. It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac? It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

Can I connect a PS3 wirelessly via the built-in AirPort card using internet sharing from my ethernet-wired iMac? It works for my Nook e-reader, but the PS3 give a DNS error code 8070102, I've tried alternate DNS settings, but no luck.

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? Thanks

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? I have tried rebooting through PRAM and various other options that I found online, but nothing has helped.
Thanks

Try using a different brand of DVD's.

I have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?

i have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?

i just baught it off someone.. so im unsure if it was jailbroken or not.. and i dont think its under warranty now.
is there a software or something along those lines that would indicate what peice of hardware is faulty?
i baught it in this recovery loop thinking it was going to be a cheap way of getting a new phone without having to do much.. but now im starting to think its a brick

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
 Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
 If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

TS3212 every time i try to download itunes my computer comes ups up with an error code half way through down load error code 2330

every time i try to download itunes my computer comes ups up with an error code half way through down load error code 2330

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

At DI R3trans fails with this error code ORA-12545, but CI runs

Hello Gurus,
We have our BW System on two instances with a separated oracle database server.
Last week the system was unreachable and we must restarted it hard.
After that, the Listener could started and runs. The DB could started, mounted and opened successfully.
Now we have a special problem.
The central instance can connect at startup to the database. But the dialog instance not.
The DI get the following error:
|> R3trans -x
This is R3trans version 6.14 (release 701 - 12.06.09 - 15:20:00).
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
R3trans finished (0012).
The trans.log entry are:
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12541'                        17 0.187511
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 12541                                    13 0.187524
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con_hdl=0, rc=12541)                                   14 0.187538
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 12541                                   14 0.187552
4 ETW000 [dev trc     ,00000]     ORA-12541: TNS:no listener
4 ETW000                                                                                22 0.187574
4 ETW000 [dblink      ,00433] ***LOG BY2=>sql error 12541 performing CON [dblink#4 @ 433]           14396 0.201970
4 ETW000 [dblink      ,00433] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#4 @ 433]                   39 0.202009
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
A telnet connection test to port 1527 are also unsuccessful.
But sporadicly the telnet or R3trans connection are successful, but the second check are unsuccessful.
We have checked the telnet connection to another oracle database server (ERP) at port 1527 and it works.
The CI have some entry's in ST22 with DBIF_RSQL_SQL_ERROR --> ORA-03114: not connected to ORACLE.
Are someone known something about this issue?
regards
Chris

@ Sunny Pahuja:
We checked sapmnt.
Sapmnt is common on CI and DI. It was never mounted on DB. But DB runs perfectly until this issue.
@ Ankit Gupta
We checked the configuration of listener.
It is the same like the listener configuration of our ERP system with CI, DI and DB on separate Servers, too.
@ Rajesh Narkhede
From DB Server
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 07:40:56
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/BW2/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
OK (100 msec)
On CI and DI we don't have tnsping.
Just copy it don't work.
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 08:39:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Message 3511 not found; No message file for product=network, facility=TNS
Message 3512 not found; No message file for product=network, facility=TNS
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
Message 3509 not found; No message file for product=network, facility=TNS
How to get it on the CI and DI. In the SAR files at SAP it is not included. I can't found something in the Web.

Trying to install creative cloud for the first time and getting error code:1

im trying to install creative cloud for the first time but im getting a error code:1
what can I do?

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

Using Windows 7 Backup (with 3.0 TB drive) the backup fails with an error code of (0x8078002A)

I have tried for over a month to back up my laptop to a new external 3TB drive (DWC130). I have reformatted it, changed my windows backup settings, and read as much as I could about this issue and still have had no success. I have reformatted the drive; I have allowed Windows 7 (64-bit) to back up with its own settings; I have read forums all over and there has been no answer provided that solved this issue. I am hoping someone from Toshiba or this form can provide some direction.

Error code 0x8100002F and or error code 0x80070002 when you back up files in Windows 7
-Jerry

Upgrade from Windows 8.1 to 10 fails with an error code, at the very end of processing

I tried to upgrade to Windows 10. It went through the whole process, and upon reboot at the very end it failed. It threw this message: I searched on these terms and couldn't find an answer. My machine is brand new. I haven't installed much on it at all, figuring it's better to wait until I've gotten Windows 10 installed. Any ideas?

So it looked like I was missing a KB update, the 3035584, which enables the upgrade. I performed some Windows 8.1 updates and got everything set up. I ran the upgrade to Windows 10. It went all the way through to the reboot, taking about 20~30 mins. At this point it asks me to confirm installation, and I select "OK" and it goes for another 20 mins. It proceeds about 10% of the way there, and then it reboots. The next thing I see on my screen is "Restoring your previous version of Windows". I'm back to Windows 8.1 again. I log in... and same error message as shown above. Frankly, I can't understand what is causing this... and why Windows can't "figure out" if my machine is good to go for a full installation in just 10 mins or so. Why go through all of these gyrations for 45 mins only to reject the whole process?

When I open itunes, itunes could not connect to the itunes store with unknown error code Ox80090318 although I am connected to internet

My Windows 8.1 laptop is connected with internet. However, when I open itunes, I got the message:
itunes could not connect to the itunes store. An unknow error occurred (Ox80090318). Make sure your network connection is active and try again.
No matter how I try, the message keeps on coming back and itunes will not connect itune store.
Can someone tell me why please.

Hello yukgmn,
To troubleshoot the error 0x80090318 in the iTunes Store, please follow the steps in the article linked to below.
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

I can't quit iCal on my imac. I keep getting "the server responded with an error"

I can't quit iCal on my imac. I keep getting "the server responded with an error" and I need to change my password but I can't even quit it to do it.

Can you do a Force Quit? Right click on it in the dock, then press the option/alt key, and Force Quit should come up in the sub menu.

Is there any way I can convert a .exe file to .iso on my MacBook Air? I'm trying to install Windows via BootCamp but the download from Microsoft is a .exe file which does me no good.

I'm trying to install Windows 8 via Boot Camp, but the download from Microsoft is a .exe file so when I go to create the bootable USB drive, it fails. I've read some of the other threads about this topic, but I want to know if there is any way to convert to .iso without having to find someone's Windows computer to borrow. Can anyone help?

No. You would require a PC in order to run the executable which is an installer, not a disc image or an archive.

I,tried,using,a,trial,version,of,creative,cloud.,I,signed,up,and,started,the,download.,The ,download,was,taking,a,long,time,so,I,decided,to,cancel,it,and,buy,a,year,plan,paying,mont hly.,I,started,downloading,creative,cloud,again,but,the,download,was,inte

I,tried,using,a,trial,version,of,creative,cloud.,I,signed,up,and,started,the,download.,The ,download,was,taking,a,long,time,so,I,decided,to,cancel,it,and,buy,a,year,plan,paying,mont hly.,I,started,downloading,creative,cloud,again,but,the,download,was,interrupted,by,my,dau ghter,by,inserting,a,usb,device,into,the,usb,port.,I,could,not,find,the,download,,I,signed ,into,adobe,and,now,it,tells,me,that,i,have,a,30,day,trial.,My,account,shows,that,I,have,p aid,my,first,monthly,installment,but,i,can,only,use,a,trial,version,,which,says,will,expir e,in,30,days.,What,can,I,do,to,get,the,full,yearly,plan,version???

Jacobm51486856 please see Sign in, activation, or connection errors | CS5.5 and later for information on how to resolve the connection error preventing your membership from being authorized.

Im trying to download tv series, but the download fails with an error code. As directed, I tap to retry, but it continues to fail. What am I doing incorrectly?

Similar Messages

Maybe you are looking for