Im trying to update a new iphone 3GS to os 5.0 an it remains in the symbol of the apple
i'm trying to update a ne 3GS to os 5.0 but it remains whit de symbol of the apple and i never ends , what do i most do ?
Hi
Can you turn the phone off your restart it by pressing the Sleep Button and Home Button together for 10 seconds?
Similar Messages
-
I tried to update my old iPhone 3GS and is giving me a message that it can be activated. This is my old phone and it shouldn't have a line but I Still like to use it as an iPod. What can I do.
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
-
I am trying to update my new iphon 4.at first i got a massege no.14. then i updated apple &tried again but this time got a massege no iphon found. serial no.appears but not a phone no.what should i do?
Sounds like it's hardware issue. The iPhone warranty is based in the original country of purchase. Since it was bought in Korea you will need to ship the phone to someone you know in Korea to be taken in and then they will have to ship it back to you. The cost of shipping will be at your expense.
-
i tried to update my jailbroken iphone 3gs to iOS 6 and i tried to activate it using redsn0w it uploaded but the phone didn't activate, then i tried to restore it in iTunes and it also wasn't working it shows 3194 error. Please help!
brigikeh wrote:
i tried to update my jailbroken iphone 3gs
Buzz! Thank you for playing!
Any warranty you had is void and your ability to get help here or from Apple is forfeit.
Try Google. We can not assist you per the terms of service.
It's very likely that your phone is now a brick. -
my iphone 3gs died and now it wont make it past the apple logo screen so i put it in recovery mode and hooked it up to my itunes on my home computer now it will say do you want to restore this iphone i click ok but then after it exctracts the software then starts to restore the screen goes black and it shuts off then 10 seconds later it turns back on it wont make it past extracting software please help me im getting really mad plaease help. it wont restore my phone and the error message 1611 come up i dont get it.. also the lock button on my iphone is broken and only works when i squeeze the topo of the iphone together so i cant put it in DFU mode
Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it
-
I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help
I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help
Put your ipod in recovery mode and then restore your software again.
-
I have a new Iphone 5 that I am trying to sync with my existing itunes account. I need to get this to sync to a different computer, than what I originally set it up on. Every time I plug it in, it takes me to my daughters itunes account, and wants to sync up with her music. How do I change the itunes account?
Hey Mike, just sign in the iTunes Store and authorize your account on this machine (don't worry, you'll be asked for it), then you will ready to use it.
-
itunes is asking for a password for the backup that I did not set. I can NOT set up my new iphone and restore it from an old backup. What can I do?
This message is asking for the password that was added when the backup was first created IF you don't have this passcode you will be unable to restore from this backup.
Good luck Friend. -
TS1363 my iphone 3gs keeps saying connect to itunes or just has the apple sign on it
My iphone 3gs keeps saying connect to itunes
Try Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
HT4623 Do i need to update this new update to my IPhone 3GS?
Do i need this new update to my IPHONE 3GS? as not enough space - iv deleted all the stuff i no longer need but still short.
Well, you don't absolutely have to have it ... but ...
First of all, here's what you would be missing (I assume you're talking about upgrading from iOS 5.1.1 to iOS 6):
http://support.apple.com/kb/HT5457
Secondly, as additional upgrades become available, you'll fall farther and farther behind.
Thirdly, as apps are updated, you may lose out on the ability to run them, and you will lose out on added features.
So, it's not mandatory that you upgrade, but I strongly suggest striving to do so. -
i tried to update my iphone 3gs and it couldnt update and now i try to restore it and it says it couldnt error 1015 so how i can fix this please.
brigikeh wrote:
i tried to update my jailbroken iphone 3gs
Buzz! Thank you for playing!
Any warranty you had is void and your ability to get help here or from Apple is forfeit.
Try Google. We can not assist you per the terms of service.
It's very likely that your phone is now a brick. -
I need to add new phone serial number to icloud, itunes. Find my phone keeps locating old phone. Any suggestions as to how to sync?
I don't understand. Won't the new iphone sync with itunes and icloud, assuming you have provided the Apple ID and password for the icloud? Serial numbers cannot be used to connect to itunes or icloud. Or am I misunderstanding your post?
-
hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated
If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing! -
I have an iphone 3gs. I have 7 separate email accounts on the phone. Everytime I update the phone, it reloads all emails received as new unread emails. I can click each one, move them to trash and then delete all. However, I am wondering whether there is any way to either (a) delete all from the inbox or (b) stop them from reloading?
ThanksHello Kizzyk,
I would start with taking a look at the settings to make sure that you are able to send and receive messages. If everything looks good then the next step would be to remove the accounts and add them back in. Take a look at the article below for more information and details on how to troubleshoot your issue further.
Get help with Mail on iPhone, iPad, and iPod touch
http://support.apple.com/en-us/TS3899
Regards,
-Norm G. -
I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.
Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
If your iPhone was hacked/jailbroken the update restore the lock.
Maybe you are looking for
-
Can I shut off the voice promts?
Is there ?any wat to turn off the annoying voice prompts?
-
My mousecursor is flickering when i go over a canvas3D. Can i solve this problem? thanx
-
Error "Screen output are too small" when looping through internal table!
Hello All: I have a huge internal table with some 79000 records and while looping through them and doing some other processing inside the loop, I am getting an error "Screen output are too small"! Could someone please help mw how to fix this iss
-
I'm looking for information on a plugin or some other such program that could help me do motion tracking automatically, in order to blur faces. Basically what Im doing right now is creating a new duplicate track of the segment i want to blur, creatin
-
Workflow created with Authoring tool produces a workflow that doesn't work
Hi, I'm getting fed-up with the Authoring Tool. It has such inconsistently bad results. Anyway, here's my current problem: 1. Create a new MP 2. Create a new Workflow that triggers when an incident is created with no additional criteria 3. Add a comm