Images disappear upon running program

Can not find the answer to this, though I've seen the comment
before. I'm publishing to inetpub for a project I'm working on to
test locally. Many times when I run the application, my images,
inside an images folder, disappear from the bin (localhost) folder
and I have to recopy them. Suggestions?

Try un-checking the "Restore windows when quitting and re-opening apps" option under the General pane of System Preferences and then opening Safari. This disables the resume feature in lion. It isn't a permanant soloution but it might help narrow down if the resume feature is responsible for this.
Edit: It might also be worth fiddiling around with the homepage settings such as setting it to only open blank pages in new windows and new tabs instead of opening your chosen homepage and see if there is any problem there
Message was edited by: Jezzle

Similar Messages

Image disappearance upon using crop tool.

Using photoshop elements 6 , OSX 10.5, image disappears after using crop tool.
Have reinstalled software, but no affect. Has anyone else had this problem?

Hi Barbara... I am wondering if I can still get a bit of help in this topic. I tried that, but the files you mentioned are not in my preferences folder in my library. I am running CS4 on OS X 10.9.5 with a 2.8GHz Intel Core 2 Duo processor and an NVIDIA GeForce 9400M 256 MB graphics card(s).in another forum it was mentioned to go to Preferences>Performance>Advanced Settings>Change the drawing mode to 'Basic', but that didn't work. Another said almost the same thing but to check off the Open GL tab... also didn't work... I am at a loss... Can you or anyone else for that matter, help?
Thanks!

Safari Opens NUMEROUS Windows Upon Running Program

Whenever I to open Safari, over 80 windows open immediately. My homepages are two websties and I'll get probably 30 or so windows with my Home "pages" combination, and then another 50 of windows of sites I visted recently. If I proceed to close the windows out, more open.
Any recommendations? Would reinstalling Safari work? Or does this look like a virus and should I just restore from my time machine backup? My most recent backup is roughly 1 week old and my external has not been connected since this began to happen.
It's worth noting this only happens to Safari--Firefox works perfectly fine. No other odd behaviors (ie. system lag, program crashes, etc.) have appeared.

Try un-checking the "Restore windows when quitting and re-opening apps" option under the General pane of System Preferences and then opening Safari. This disables the resume feature in lion. It isn't a permanant soloution but it might help narrow down if the resume feature is responsible for this.
Edit: It might also be worth fiddiling around with the homepage settings such as setting it to only open blank pages in new windows and new tabs instead of opening your chosen homepage and see if there is any problem there
Message was edited by: Jezzle

Images disappearing in photoshop cs2...

Hello Folks,
I seem to have a problem brewing in Photoshop...Lately when I am working in Photoshop, if I have more than one image open at a time and I go to close one of them they all disappear from the screen but they are still open. I have to go to Close All and start over. Also, if I am using the polygon lasso tool, I will be carefully tracing a part of an image and suddenly the image disappears, while the window is still there, it turns grey and all I can see is the lasso tool traces I have made but I then have to start all over because I have to get the image back and the only way to do this is to end the lasso session and start over...The image will come back at some point after I reset the tool but I have to start all over again...I have updated everything, tried to optimize Photoshop performance but nothing seems to work...I am using windows media center edition sp 3 and have 1.87 gb of RAM. I can't think of anything that corresponds to when this started happening, I didn't change much except I do always do windows updates but I choose which ones I want to install and what is junk...Unfortunately the scratch disk is the same drive as the program is on but at the moment I don't have an alternative, could this cause this situation? Should I invest in a drive just for the scratch disk? Or, if anyone has any other suggestions I am willing to try anything...This program is important to my work and I use it a lot...
Thank you,
Jennifer

Off hand it sounds like video driver or low ram issue. Examples:Windows did an update that included a faulty video driver (which isn't very likely) or you install another program that wants to run in the background. The former usually require you to enable the download of hardware drivers for the update, the latter well even a virus could do that.
Goto your video card makers website and get the latest driver that they recommend and then run msconfig (Start>run>msconfig) disable all the startup programs and see if that helps, when you are done, make sure you reenable the programs. Each time you use msconfig it will require a restart.
If that don't help, next is check the hard drive making sure you have enough room, defraged and no errors.
Next is to run a test on the ram. You should find one at downloads.com or take it to who ever services your system and let them do it. Mind you they will charge for time checking and cost of replacing the ram or HD is needed. This is definately a last step effort. Try to do as much as you can first to save some money, if if you are unconfortable doing this then the money is well spent.

Images disappear after being selected from galleries

I created an app in Project Siena that serves as a product catalog for our Remote Sales team to use on their tablets. The app relies heavily on image galleries for navigation. Everything works fine, except that as you navigate back and forth
through the app pages, images that have been previously selected start disappearing from their gallery upon returning to their page. Anyone seen this happen before?

Hi Bruton, thanks for the quick response. I'll try and break this down as simply as possible:
-Built on Excel tables containing links to images. The images are located in a mapped network drive that is synced offline.
-All images appear fine at first as you navigate through the app; then, as you go back to the Index page and go back through the same pages, you start to see previously selected images disappear from the gallery. All the other images show up fine in
the gallery. Only the ones that have been selected previously disappear. If you close that app and re-open it, voila, all images display without issue.
-This same phenomena occurs while running the app in Project Siena; when the images start disappearing, I will update the data sources, and voila, the missing images come back.
-There are four basic pages that each contain an image gallery: Index, Brand, Group, and Product
-You drill down by selecting a brand, then a product Group, then an individual product (hence the 4 pages)
-Note: some "brands" that are chosen take you directly to the Product page, bypassing the Group page
-The image galleries on each page are used for the navigation (drilling-down to next level)
-When you tap an image from the gallery, you launch the next page... below is the navigation code for the image gallery on the Brands page. (I used "UpdateIf" function w/ 1=1 so it's always true, because I wasn't sure how to use other "Update"
functions.)
UpdateIf(CollectedGroup, 1=1, {Groups: Group_Gallery!Selected!Groups, GroupImage:Group_Gallery!Selected!GroupImage, BRAND: Group_Gallery!Selected!BRAND}); If(LookUp(ProductTable, Products in CollectedGroup!Groups, Products) = ThisItem!Groups, If(IsEmpty(CollectedProduct),
Collect(CollectedProduct, Group_Gallery!Selected), UpdateIf(CollectedProduct, 1=1, {Products: Group_Gallery!Selected!Groups, ProductImage: Group_Gallery!Selected!GroupImage, BRAND: Group_Gallery!Selected!BRAND, Groups: Group_Gallery!Selected!Groups})), If(IsEmpty(CollectedGroup),
Collect(CollectedGroup, Group_Gallery!Selected), UpdateIf(CollectedGroup, 1=1, {Groups: Group_Gallery!Selected!Groups, GroupImage: Group_Gallery!Selected!GroupImage, BRAND: Group_Gallery!Selected!BRAND}))); If(LookUp(ProductTable, Products in CollectedGroup!Groups,
Products) = ThisItem!Groups, Navigate(Product_Page, ScreenTransition!UnCover, {BackScreen:"Brands_Page"}), Navigate(Groups_Page, ScreenTransition!UnCover, {BackScreen:"Brands_Page"}))
Here is the navigation script for the Groups page gallery:
Clear(CollectedProduct); If(IsEmpty(CollectedProduct), Collect(CollectedProduct, Group_Gallery_1!Selected), UpdateIf(CollectedProduct, 1=1, {Products: Group_Gallery_1!Selected!Products, ProductImage: Group_Gallery_1!Selected!ProductImage, BRAND: Group_Gallery_1!Selected!BRAND,
Groups: Group_Gallery_1!Selected!Groups, GroupImage: Group_Gallery_1!Selected!ProductImage})); Navigate(Product_Page, ScreenTransition!UnCover, {BackScreen:"Groups_Page"})
Data script for the gallery on the Groups page:
Filter(ProductTable, Groups in CollectedGroup!Groups)

Embedded images disappear on column sorts when viewing SSRS via url in an iframe

RE: SQL Server - 2008 R2 Reporting Services
We deliver an ASP.Net MVC (5) application and some of the views show/display SSRS report via url in an iframe (so the report is displayed vi the web viewer). There are images in the header of some of these reports which display correctly on the initial
view, but "disappear" when the user uses a report column sort and/or changes the report zoom (via the SSRS web viewer toolbar). There are other quirky behaviors as well (depending on the browser), but we are dealing with IE versions 8 thru 11. I've
already set the ReportViewer.aspx to use <meta http-equiv="X-UA-Compatible" content="IE=7">, and our application pages/views use <meta http-equiv="X-UA-Compatible" content="IE=edge">.
Does anyone have a "fix" for this? I know it's related to the ReportViewer.aspx and displaying the report(s) in an iframe, but I can't seem to find any information on how to fix the issue.

Hi,
According to your description, when you preview report through url in an iframe, the embed images can be displayed, images can’t be displayed after users used sort and changed report zoom.
To troubleshoot the problem, please refer to the following steps:
Run the report in Business Intelligence Development Studio (BIDS) to make sure that the images can be displayed correctly.
The issue may be relevant to compatibility of browser, please use different browser to check whether the issue persists.
If you are using embedded image of jpg type, please change the extension of the image to png.
Set the ReportViewer.aspx to use <meta http-equiv="X-UA-Compatible" content="IE=8">.
Here is a relevant thread you can reference:
https://social.technet.microsoft.com/Forums/en-US/56650bf4-e65d-4f84-8ac0-a57cb26543b2/image-disappears-when-sorting-in-ssrs-for-server-report-on-report-vieweron-aspx-page?forum=sqlreportingservices
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Run program at shutdown

I think this is asked about fairly often. I would like to run a program (SuperDuper!) at shutdown. Obviously, it should be possible to customize the OSX shutdown procedure to do what I need.
Before I dig into this, any advice? I don't know much about OSX's (10.4) startup and shutdown, but I assume they're a variant on the tradition rc or init.d style scripts (I know launchd does startup). I'd appreciate any input before hours disappear.
("Running at shutdown" is a common scenario, why did Apple leave out an easy way to configure this?)

rmichael-apple wrote:
("Running at shutdown" is a common scenario, why did Apple leave out an easy way to configure this?)
Because it opens up a big can of worms, such as people who might try to run lengthy tasks such as SuperDuper. There are any number of problems that a "run at shutdown" operation could cause. Apple has wisely chosen not to provide such an option.
One of the main reasons you will never see anything like this is because it is so easy to accomplish in a slightly different way. Instead of creating a task to "run at shutdown", create task which does something (such as run SuperDuper) and then shuts down. This is easy to accomplish and will cause no problems whatsoever.

Why does my image disappear when I click on it to enlarge?

I am using iPhoto '11, version 9.4.3 When I click on a single photo from an event to see and enlarge it, the image disappears, and what I see is a black screen with a large triangle and an exclamation point inside the triangle. What does this mean? I don't think the photo is actually disappeared because I can still see it in the smaller size.

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Image disappears after effect in HTML5

Hi
I am using Captivate 7.0.1.237.
I have set up my project as follows:
Slide 1:
1. I have an image that has an effect of Left to Right. When the project is launched, the effect is paused using an adv. action. Got a variable, say Var_1, in an adv. action to pause it: On enter, if the variable is 0, then pause.)
2. I have a button to generate a random number. This number is assigned as the new value of Var_1.
Slide 2:
Have an On Enter adv. action: If the value of Var_1 is "n", then pause.
Though I have not explicitly mentioned, the project moves to next slide if the Var_1 value is not "n".
Now, this is working fine in SWF output. However, in the HTML5 output, when the value is "n", the slide pauses but the image disappears after the animation effect.
Any idea why?
Thanks in advance.
Sreekanth

The current frame number when the action runs and when slide pauses as per the actions is same in both SWF asnd HTML5 outputs. Here are the screenshots. The yellow colored object is the one that has the effect. 181 is the frame number.
SWF Output
HTML5 Output. Notice the yellow object missing
I noticed one interesting difference in starting frame of SWF and HTML5 outputs. When I launch the preview the SWF (using F12), the current frame number is 0, whereas the first frame in HTML5 preview (using F11) is 1. I am not sure if that has got anything to do with the issue I am facing.
Sreekanth

Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony

Error with Run Program Service in invoke runbook.

I made main runbook (it do some things) and on the end i pute invoke runbook. In this child runbook i have
Run Program activities with Java srcipt.
When started this rb finaly i get error Could
not start Orchestrator Run Program Service service on 10.56.7.17 - Access is denied. (code 5),
but when manually i run this child runbook with any chaneges and this same date it works well.
In this Run Program i set that it ryn from admin acount but that don't nothing changes.
Where is problem?

When you run it manually (with Runbook tester I assume) the Runbook will use
your admin credentials to perform all of the actions. When it runs scheduled or with an invoke from somewhere else it will use the credentials of the user account you've assigned to the Runbook service.
As a test, check which user is assigned to the service (via services.msc) and make that one a temporary local admin on the target machine. If it works, then you know it's permissions related to that specific account.
I give up ;), Yes, I testing by Runbook tester. But not shure that we understand :)
I have two scenarios (i can't put images, i need to verify my account).
1) One runbook. Exp. name" child. Inside is Run Program, that program is on different server.
Its work only when in options this activity i set local admin account from that server.
2). I created new runbook - parent. In this I put invoke runbook linked to that child. I do not change anything else. Now i will try run it (from tester, web console or scheduled) i get error
Could not start Orchestrator Run Program Service service on 10.56.7.17 - Access is denied. (code 5).
What I do wrong, what I think wrong?

TS3276 Mail images disappear and Base64 code appear in-place.

After receiving and viewing a mail with inline images, I close the message and when opening it again, images disappear and Base64 code appear in-place.
How to revert that?
I don't use any plug-in, running Mail 6.6 (1510) and OSX 10.8.5

>Only if your network is unstable. For most groups, it's not only
acceptable but in fact is the only way to work especially if there's an
InCopy element to the workflow.
This will always come back to bite you eventually. Maybe not today and maybe not even this year, but eventually.
http://blogs.adobe.com/jnack/2008/06/filesaving_issu.html
Why not set up a good system to deal with file check-outs instead? We link directly to all of the graphics across the network, but the actual InDesign files that are going to be edited and saved are all edited locally after check-out.
Just my $.02 on the matter...
EDIT: Oops, I see you tried the INX export already! Were these files perhaps pasted directly into InDesign? If so, you can copy them out and save them as graphics and relink to the graphics, but otherwise they are just a part of the file.

Create overlay graphic for other running programs

Ok, I have a small idea for creating an "overlay" graphic panel that i wish to hook ontop
of another running program on the computer.
For example, lets say we have internet explorer, and i wish to create a small java application
that will "paint" ontop of internet explorer. Perhaps drawing a transparent image right in
middle of internet explorer.
Anyone have any suggestions on how this could be accomplished?

This is a VI which calls the undocumented MessageBoxTimeout function.
It is similar to the MessageBox function (http://msdn.microsoft.com/en-us/library/ms645505%28v=vs.85%29.aspx), but it does include the ability to have the message go away after a certain amount of time (setting timeout to 0 leaves the dialog open indefinitely).
If you set Message Box Modality to MB_SYSTEMMODAL, it will display in front of all applications.
Attachments:
AIT - WinAPI - MessageBoxTimeout.zip ‏86 KB

Error upon running a page in Jdev 10g on a Windows 7 OS

Hi All,
Just want to seek assistance re the error I am encountering upon running a page in JDeveloper version 10.1.3.3. I got my new PC last week and was able to transfer my working directory from my old PC to the new one. The new PC has Windows 7 OS and IE 8 browser while the old PC has Windows XP and IE8 browser. Below is the error message :
500 Internal Server Error
oracle.apps.fnd.cache.CacheException at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1485) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:354) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1259) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1114) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1083) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1050) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1037) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:941) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:926) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:891) at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:1027) at oracle.apps.fnd.common.WebRequestUtil.validateContext(WebRequestUtil.java:223) at OAErrorPage.jspService(_OAErrorPage.java:62) [OAErrorPage.jsp] at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.3.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193) at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:847) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:813) at runregion.jspService(_runregion.java:193) [runregion.jsp] at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.3.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.3.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298) at java.lang.Thread.run(Thread.java:595)Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: java.lang.NullPointerException: null Connection at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:712) at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802) at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624) at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216) ... 50 moreCaused by: oracle.apps.jtf.base.resources.FrameworkException: An exception occurred in the method CacheAccess.getnullThe base exception is:null Connection at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607) at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249) ... 54 more
Though I tried to do the setup in a laptop with a Windows 7 and IE8 browser also but it works fine. The page that I am trying to run in my new PC was properly displayed in the laptop.
Don't know what to check on the setup of the OS and IE in my new PC and the laptop with the same OS and IE versions?
Thanks in advance!
dolps

Dolps,
I manage to fix this.
Just a thought, I changed the regional settings to English US
Not sure why, but the date/time appear differs with my date/time in my PC
Hope this helps.
cheers,
Elmer

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Images disappear upon running program

Similar Messages

Maybe you are looking for