Images used inside the Portlets are not getting displayed on Oracle Portal

I am registering my JSR Portlet producer on Oracle Portal server but when its rendered on the portal page its not showing images.It just shows a red cross mark showing image is not loaded.Can anyone help me out please samt thing is happening with CSS also.Please reply soon

I'd check the image properties (right click the x and choose properties) and see what the path is for the image. If it is a relative path, you need to make sure that the file is in that location on the Application Server. /images/myImage.jpg would mean the file should be in $ORACLE_HOME/portal/images on the midtier.

Similar Messages

  • Whenever a record is Edited the rows are not getting displayed in the repor

    Hi all,
    When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
    Please Any body faced this situation...
    Help me to identify what error i am doing........
    thanks in advance
    kavitha L

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • Arabic characters are not getting displayed in oracle pdf output

    Hi,
    I am trying to print arabic characters in report output but junk characters are getting displayed in output.
    Using 10g report builder, added the arabic labels in report layout.
    Followed below steps:
    1. Set NLS_LANG=ARABIC_United Arab Emirates.AR8MSWIN1256
    2.Set REPORTS_PATH to the system font directoy such as C:\SYSROOT\Fonts
    3.transferred the arialbd.ttf to $ORACLE_HOME/guicommon/tk/admin/AFM
    4.Open uifont.ali under$ORACLE_HOME/guicommon/tk/admin, set the font alias
    entries at [PDF:Subset] section.
    [PDF:Subset]
    Arial...Bold.. = "arialbd.ttf"
    5. open datap462.ppd under $ORACLE_HOME/guicommon/tk/admin/ppd, set the font information like
    *Font Arial-Bold: Standard "(001.001)" Standard ROM
    6.added following entries:
    Add this under the following section
    ## setting for Reports Runtime
    REPORTS_PATH=$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/samples/demo:$ORACLE_HOME/reports/integ:$ORACLE_HOME/reports/printers:$ORACLE_HOME/
    guicommon/tk/admin/AFM:${REPORTS_PATH};
    export REPORTS_PATH
    b) Add this in the end of the Reports.sh file
    PRINTER=dds62; export PRINTER
    tk90_PRINTER=dds62; export tk90_PRINTER
    tk90_PRINT_STATUS=echo; export tk90_PRINT_STATUS
    =======================================
    After having all these steps, still my report output is coming with junk characters.
    Please help me on this and this is very urgent requirement for me and i am trying on this since 3 days.
    Thanks,
    Harini

    Hello,
    Try to set the Font Subsetting like below in the file uifont.ali
    [PDF:Subset]
    * = "arialbd.ttf"
    If it works after this modification, the problem will be related to the Font Aliasing
    Troubleshooting Guide for Font Aliasing / Font Subsetting / Font Embedding Issues (Doc ID 350971.1)
    Regards

  • Portal Forms are not getting displayed in the new oracle environment.

    Hi All,
    The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
    Regards,
    Tom

    Hi ,
    Based on the requirement , check whether the customer contact has been done carried out for the invoice  , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

  • Pictogram in EP 7.4 are not getting displayed.

    Hi Everyone
    We have installed 7.4 and export the roles of portal 7.01 to 7.4 however the pictograms are not getting displayed.
    We copied all the images manually from old path to the new one but still its broken using:
    In the content administration >> web resource repository. In the tree find the folder "pictograms" right click on it and upload all of the pictograms
    We followed the note 1753605 but that didnt help too.
    I have checked this link:
    Managing Pictograms in the Web Resource Repository - Portal - SAP Library
    What is the cause of this error?
    The system take the picture resource for show the pictograms that show the screen of ESS.
    Thanks
    Regards

    Hi Samuli.
    We are working with AIX.
    The Path /usr/sap/<SID>/J<SYSNR>/
    j2ee/cluster/apps/sap.com/pcui_gp~xssutils exist , however the directory Components/com.sap.xss.ser.xssmenu.vc.areagroup.VcXssMenuAreaGroup not exist and we have created the folders. and in thie new folder copied the pictograms , however the issue continue.
    http://pbmdebddpd02.bancolombia.corp:50000/webdynpro/resources/sap.com/pcui_gp~xssutils/Components/com.sap.xss.ser.xssmenu.vc.areagroup.VcXssMenuAreaGroup/hcm_beneficios.gif
    We have tested the url and this system genera the following error
    http://hostname:port/webdynpro/resources/
    Thanks
    Regards

  • Images for tabs are not getting displayed in the page if Iam using a template

    I have page with a unstructured template. I have arranged tabs on page with images attached. But images are not getting displayed. why

    Hi,
    Please check if the images are in the server and in the /images alias path.
    thanks,
    Sharmila

  • How come the images are not getting displayed in ie?

    Hi,
    In my application i have a page where the thumbnails
    representing the videos uploaded into the site should be
    displayed.These imgaes are getting displayed in mozilla properly,
    but when it comes to ie 7 they are not getting displayed..instead
    iam getting a broken image.Please suggest me a solution.Thanks in
    advance.

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

    Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

    Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share,  as I am facing real problem because of this...

  • Images from KM are not getting displayed in EP

    Hi All,
    I am using EP7.0 SP11.When I run the portal, the images are not getting displayed. When I right click on the * mark and click on Show picture, then also its not appearing.
    Location of the Images that I received from EP is mentioned below.
    http://hostname:port no./irj/go/km/docs/documents/HP_Images/Image_123.jpg
    Images are available in the location in the below mentioned path as .jpg files:-
    http://hostname:port no./irj/go/km/documents/HP_Images/Image_123.jpg
    Difference in both is a DOCS folder missing in between........
    Is this is the reason for the image not getting displayed?
    Anything more has to be done in KM part to display these images?
    May I know how to solve this issue??
    Regards,
    Athulya

    Hi,
    the right path look like this: /irj/go/km/docs/<path_to_document>.
    You may have to check you URL generator service settings. Here:
    Configuration - Content Management - Global Services - URL Generator Service(advanced section)
    and then have a look for example for the following values "Content Access Path:" and "Viewer:" normally they both have same value "/irj/go/km/docs".
    Hope that will help.
    best regards,
    --epexpert

  • The agents are not getting determined

    Hi Gurus,
    In the standard workflow WS00300022 with BUS 2104 for Approval of Appropriate request, the agents are not getting determined.
    Below are the steps followed:
    We have created a subtype for BUS 2104 and redefined the display and edit to add some new functionality. Delegated the business object and followed all the standard steps. Now the present situation is that the Workflow is not able to determine agents.
    We have even removed the subtype and checked with the standard functionality but still it is not determining the agents.

    Hi,
    Kindly Diagnose your WF:-
    Use the following transaction:-
    1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
    2> SWEL -> DISPLAY EVENT TRACE
    3> SWUD -> WF DIAGNOSTICS
    4> SWPR -> WORKFLOW RESTART AFTER ERROR
    Enter the WF Number and Click on the LOG Icon.
    There you can see the Graphical Log of the WF to know where the WF is stuck.
    And You can also check the Technical Details of the WF there, to find which WF Container has what value.
    In the LOG, you can determine the step where it is unable to determine the Agent. That will give a picture of how to proceed further and what is the WF status at that point.
    Kindly check and revert back, so that a solution can be provided.
    Regards,
    Kanika

  • Write Statements are not getting Displayed

    Hi All,
    We are going for Upgrade from 4.7 to ECC. So, in my program we have few write statements which are not getting displayed in the output. Those write statments are seen as errors in the extended check as Char. strings w/o text elements will not be translated: 'Income Tax Worksheet'.
    Could any one please help me to over come this errors and Display the wite statements.
    Thanks
    Shashikanth

    Have you mapped the checked and unchecked glyphs to be used?
    Check the doc and blog for check boxes.
    Regards
    tim

  • IPA(phonetics) chars are not getting displayed in ...

    Hi,
    I am using Nokia E63 , I am facing character display problem in browser, not all characters,  but characters related to IPA. 
    IPA(phonetics) chars are not getting displayed in internet browser ( even in Opera mini). How do i solve this. 
    Ex: www.dictionary.com shows IPA char, but E63 shows as s plain BOX.
    Is it possible to fix this problem or I should go for android OS based phone?
    Thank you...
    Samson

    Hello,
    have created some new users and done with the leave request, it comes to backend inbox, but not
    visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
    Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
    You can see what data source your portal is using by going to
    Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
    If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
    Here you can check if your user is contained in the data source:
    Portal --> User Administration --> choose the right data source --> put in the username --> search
    Please check if your users are correctly created.
    Regards,
    Iris

  • Google Charts are not getting displayed in Firefox ver 4.0.1

    Google Visualisation charts are not getting displayed in Fire Fox latest version. Please have a look at the below url.

    Thanks for the link. That one doesn't use the Flash player, so the problem must be somewhere else.
    If you use NoScript or other security add-ons, make sure google.com or code.google.com is allowed to run scripts.
    Could you try disabling graphics acceleration and see whether that makes any difference?
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the General mini-tab, uncheck the box for "Use hardware acceleration when available"
    This will take effect after you restart Firefox.

  • Workitems are not getting displayed in UWL

    Hi All,
             We have deployed ESS/MSS Business packages in our system. Also configured UWL to display workitems in portal. But when testing leave request, leave request workitems are not getting displayed in portal as UWL. Any help on this will be appreciated.
    Thanks,
    Krish.

    Hello,
    have created some new users and done with the leave request, it comes to backend inbox, but not
    visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
    Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
    You can see what data source your portal is using by going to
    Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
    If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
    Here you can check if your user is contained in the data source:
    Portal --> User Administration --> choose the right data source --> put in the username --> search
    Please check if your users are correctly created.
    Regards,
    Iris

  • Data carrier & application field are not getting displayed in CV04N

    Hi Guru's
    In TCode : CV04N,  data carrier & application field are not getting displayed.
    While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
    Let me know is there any configuration that has been missed out.
    Regards
    Bhanu

    Hi Bhanu,
    Please note that the fields 'Data carrier' & 'Application field'  are visible only if no document type is entered.
    Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
    Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
    Regards,
    Pradeepkumar Haragoldavar

Maybe you are looking for