IMAP email setup problem. Deleted items are still in my Inbox

I've already contacted my e-mail provider (123-Reg) and they are adamant this is an Apple problem, hence the question to you helpful souls
If I delete emails using my iPhone or my iPad, the email correctly disappears from my Inbox and goes into my Trash folder when viewed using the Webmail.
However, when I delete them from my Mac (Mavericks), the emails move into the Trash folder correctly when viewed on the Mac, but on Webmail, they not only go into the Trash folder, but also remain in the Inbox, but with a strikethrough.
Any ideas?

From the Mail menu bar, select
Mail ▹ Preferences... ▹ Accounts
Select one of your IMAP accounts in the list on the left, then open the Mailbox Behaviors tab, Uncheck the box marked
Store deleted messages on the server
Do the same in your other IMAP accounts. Save the changes when prompted.

Similar Messages

  • Help please? Outlook 2011 stuck on 'updating message list' after deleting 1000's of emails from my 'deleted items' folder

    Hello.
    I've been searching online for an answer and can't find one - hopefully someone can help...
    I recently updated to Yosemite and decided on a general clear-out, so went through 1000's of documents, photos, emails, etc. I ended up deleting the all of the emails in my 'deleted items' folder. Since then, when I go into Outlook and hit the 'send/receive' tab it logs on as normal, but then gets stuck on 'updating message list' - it shows me that there are emails and how many, but will not download them.
    Does anyone have any experience of this?
    Many thanks!

    As Outlook, part of MS Office, is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
    Office for Mac
    Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful.

  • HT2480 I need help syncing my computer outlook email (through Yahoo) with my Iphone. when I delete an email on my computer is it still in my inbox on my phone.  Any help is appreciated.

    I need help syncing my computer outlook email (through Yahoo) with my iphone.  When I delete an email on my computer it is still in my inbox on my phone. Please help.

    Your computer is probably set up to access your Yahoo mail using POP3. POP3 does not synchronize with the server. For full synchronization, you will need to use IMAP instead. See the Yahoo mail help pages for instructions on how to configure your mail client.

  • Email setup has deleted on blackberry curve 9320

    Hi...
    I need your help...
    I can't receive an email because
    Email setup has deleted. I try to click on email accout but not respon...
    What should I do???
    Please help me.

    I have same problem.  But I did not change anything on my blackberry. Email works on laptop but not on my cell.  
    sam2919

  • 2LIS_02_ITM - Deleted items are not in the ODS 0PUR_O01

    Hello,
    We activated 2LIS_02_ITM extractor. We noticed that the deleted order items are not available in the ODS 0PUR_O01. SAP Note 578471 (Deleted positions in BW and statistics) explains that deleted items are not "statistical" relevant. However, this is an issue for us. Does anybody know if it's possible to change the behaviour of the extractor to keep deleted order items in the ODS ?
    Many thanks.
    François.

    Yes this is a known behavior in case of deltas.
    For Deleted line items Rocancel field will have an entry with R.
    To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
    Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
    Regards,
    AL

  • Two work items are generating in approver inbox ?

    Hi Experts,
    iam working on PR Workflow. I used the user decision to the Approver for approving.  when i relased in me54n. it will go to the approver. but every time two work items are generated in Approver inbox.
    I used the Responsible agent and possible agent is the same user.
    Please how can i control this ?

    Hi Chinni,
                   I guess this could be happening because of any of the following reasons.
    1) if you are using a custom workflow for PR release check the standard one is deactivated.
    2) In SWEL check the event linkage for your BUS there could be 2 of them, Delete one of them.
    Regards,
    Dheepak

  • IMAP Email / Folder Issues / Deleting Issues

    Recently purchased the Palm Pre and love it.  I use an IMAP acount through a webhosting company (oneworldhosting).  I am able to get and receive email with no problems.
    Only issue is that under "Default Folders" in "Preferences", it says "none yet available".  Would love to have a sent / trash, etc folders.  Only have "Inbox / Outbox".  Also, deleted emails do not delete on the server.  I have folders in my webmail account, but perhaps that doesn't carry over.
    Any thoughts? 
    Thanks,
    Matt
    Post relates to: Pre p100eww (Sprint)

    yes, I experience the same bug: if I wipe out or delete imap emails_ they disapear until the next sync happens. Then they are bach. Delete simply doesn't work with IMAP!!!! urgent fix needed!!!

  • POP3 & IMAP Email setup for both Wifi & Cell use separately...

    Hello,
    I was asked to post info about this by an iPhone support rep.
    I initially had lots of trouble setting accounts for use with both my WiFi home and office networks and for use through the ATT cell network.
    If you have a question as to how to setup email for both WiFi and Cell use, answer is you can't configure these manually and you don't want to...the phone does this automatically...and seamlessly. (you will NOT see the change in the advanced settings menu, this occurs internally, the settings appear the same)
    The problem: Accounts changing settings automatically...when manually configuring two separate accounts with the same email address but trying to setup the outgoing settings for different ports...one for WiFi (your broadband server acct / port 587) and one for Cell (cwmx.com / port 25)...THIS WON'T WORK!! My WiFi configured email accounts would automatically switch to Cellular configured email accounts as long as they had the same email address. Even though I gave them different names, the phone looks at the "actual email address" and if they are the same it changes your configuration to match the other account (it does this by matching the account that was either ON or OFF first and as soon as you match the second account to that setting (either ON or OFF) the phone switches the settings to match the first account.
    The Solution: (End of the Story first for those who have or are facing this problem): Be sure to setup the email accounts for use with your WiFi account first (and ONLY), as when you leave the WiFi area or turn off the WiFi setting the email account will automatically reconfigure itself for use with the ATT Cellular network...then the settings will switch back when you re-connect to the WiFi area(s). The settings that you will "SEE" are your setup for WiFi, this will not change even when using the Edge network (at least not what is displayed in the "advanced" menu). You will still see Port 587, even though the phone is changing setups internally and changes back once back on a WiFi network, you just don't see the changes.
    *I hope this helps!*
    (more details below for those who might be interested and _for those who may be trying to setup using COMCAST Broadband_)...
    My issue began because I could not get my Comcast setup to work for outgoing email. So I was advised to setup for the Edge port settings by an iPhone support person from ATT...this was a huge error. Because I attempted to do this it actually kept the phone from smoothly converting settings as needed. I only discovered this after resolving the actual problem with my WiFi (Comcast Broadband settings) issue which was actually the setup that MUST HAVE a user ID and Password, at least when using a Comcast Broadband account. Unlike the rest of my XP and ME computers on my networks which do not require this info, the iPhone DOES.
    Because I could not get outgoing mail to work with my broadband setup I attempted to setup two accounts for each email address...one for Cellular and one for WiFi for when I would figure out my problem...or for just sending email more quickly. This does not work as the conflict causes a nightmare. This is something the iPhone support folks should have explained but failed to do so, perhaps as they didn't know this?
    Bottom line: Let the phone do the choosing...it works great and will avoid YOU wasting TWO DAYS and more than 12 hours on the phone with iPhone Support as I did. I eventually figured the port switching issues and solutions on my own through trial and error and luckily one bright iPhone support person advised me that he knew for sure that when using the iPhone with Comcast you must setup "outgoing settings" using an "ID" and "Password" which I was provided by Comcast in only a few minutes. I don't use their emial account but I setup one just for this purpose. Once done, my email accounts began working normally. Once I resolved the conflict issues listed above the phone now works great both WiFi and Cell.
    -Rich

    fullspool,
    Comcast offers an authenticating SMTP server that should work for you on WiFi and EDGE both.
    The settings are linked in this Apple knowledge base article:
    http://docs.info.apple.com/article.html?artnum=306074
    The Comcast link is:
    http://www.comcast.net/help/faq/index.jsp?faq=Emailtop18913
    From that link the settings are:
    Your email address: [email protected]
    The email server type (POP)
    Incoming mail server: mail.comcast.net
    Outgoing mail server: smtp.comcast.net
    With SSL on for both incoming and outgoing.
    Hope this helps,
    Nathan C.

  • N8 imap email setup

    How to make subfolders under in-box on a N8. Further, how to autosort incoming email to these subfolders. I have two email accounts. The work email set up under exchange got copied to the phone with subfolders, so this is a question concerning my private email setup. I use a mac at home, and it might be that the subfolder structure would have been copied to the phone if I had connected to an outlook account.

    Hi,
    I guess there is no solution at the moment (please prove me wrong...). It seems that parts of the old Nokia email client are missing in the new N8 client. As far I understand the problem this was planed as a "feature" of the new client, because the client try to recognice folders by itself.
    How ever - unfortunatly this automatic is in fact it is a big drawback because the function to subscribe folder is now missing and implementation of the search function is realy poor implemeted.
    This means if a IMAP folder is any where else then in the root tree the client is not able to find it and in the moment there is no way to set the path manualy - as it was possible with the client.
    This means e.g. for german T-Online/T-Mobile customers that the client will not work for them with folders until Nokia supply a fix.
    I feel that Nokia should change that realy fast - because T-Mobile is this is germans mayor mobile network operator and I'm onestly speeking realy disapointed about fact that they come out with a new email client that is not compartibel with a mayor network operator.
    cu
    DXB

  • Problem deleting Content Areas

    Hi!
    i have just encountered the following error while deleting a content area
    An unexpected error has occurred (WWS-32100)
    ORA-6502: ORA-06502: PL/SQL: numeric or value error (WWC-36000
    Thing to mention is... before that when i tried to delete another content area my browser hanged for pretty much time and i had to abort the deletion,after resuming back to that page i have that content area there but all edit,open links have disappeared,clicking on the link shows error page 'Folder ID Does Not Exist',checking the databse shows corresponding entries still in wwsbr_all_languages$' and wwsbr_site$',after trying instructions(found in another thread with similar problem) from sqlplus there is no reponse after executing the delete query,what might be the problem
    any steps to follow up
    How can I get rid of these errors??
    thx
    Alizeh

    We have the same problem - we deleted content areas in 3.0.8, but they still display in navigator, and we upgraded to 3.0.9 and they still display but they do not exist.

  • E75 email setup problems with 210.12.15

    Corporate email and gmail have worked fine for a year, but after 210.12.15 upgrade started first to have synch problems. After shutting of the E75 it now loses email setup information and just keeps asking passwords. I have tried resetting to factory defaults and restoring phone data, but still not able to sync email. Trying to setup email from scratch also gives error message in the beginning and is not able to connect to the server. 210.12.15 included changes to the email software, so it is the obvious candidate, but I haven't seen any other people with the same problem?
    80's user

    Hi,
    after repairof keyboard, E75/ FW 210.12.15 was installed. I've not only problems connecting to my home WIFI network for checking mail (MAC filtered and with WEP key), I also can't connect to Internet thru this WIFI network. Checked with another open WIFI network and did not succeed either.
    I've indeed noticed changing some settings were not stored.
    Aonther thread mentions FAT of memory card corrupted, letting E75 reboot spontanuously. Formatted my microSD card. Still rebooting unexpectedly.
    I find it strange this version is not on official Nokia support site.
    Hope we can find solution.
    Stefan

  • Pearl 8120 - email setup problem-pls advise

    Hi everybody,
    I bought my bb via ebay - unlocked,new. I cant setup my email, as it only has 2 options:
    1/ setup using bb enterprise server
    2/ skip email setup
    missing the option setup /add new email address for bb internet email
    i am a private person with no enterprise password, is there something i can do to make this work?
    my seller has no clue what i´m talking about, replaced the phone and it has the same problem
    thanks a lot
    Erika

    Maryteetee wrote:
    Pls,I just bought a new BB,I want to set up email but it is not co-operating. What can I do?
    Hello,
    Please add some details..."not co-operating" is inadequate to even make any guesses. What exactly do you try? What exactly happens with what you try? Are there error messages? If so, what are they (exact, complete, including punctuation please)?
    Details always help us to help you better.
    Thanks and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Email setup problems - user name error

    Hello,
    This afternoon, I was handed a blackberry for the first time by my work.  It had previously been someone elses but was wiped.  I am having problems trying to get it to set up my emails.  Here's what is happening:
    Click on Setup Wizard
    Click on Email Setup
    Select 'I want to create or add an email address'.  Click Next.
    Get a message saying 'After you click Next, the Blackberry Internet Service setup application opens.'  Click Next
    The screen says 'Existing users - If you want to access your email settings or you changed your device, log in.'
    It then asks me to enter my user name and password.  I put in the user name and password that I registered on the Blackberry ID website earlier today, and it gives me an error saying: 'Blank User Name.  Type a valid user name.'
    I have tried several times now, tried turning the phone on and off, but nothing seems to work.
    Can anyone help?

    Hi and Welcome to the Community!
    It may be that you have an older device, older OS, and older email configuration app. As such, BIS is likely not linked to the BB ID (that's a newer capability). Rather, you need the actual BIS credentials that are associated with that BB...the BIS service is linked to the BB PIN, and that linkage is at the service provider side, so wiping the device itself does nothing concerning the BIS account credentials. You either need those or you need the carrier to reset the BIS account.
    As a company BB, you should probably seek support from your admins...it is also possible that they are blocking the use of personal email accounts on the company owned BBs.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • BlackBerry Storm 2 9550 Email setup problem

    I have a Tmobile BlackBerry curve 3g originally with a BlackBerry plan (BIS) that has an email, internet, and blackberry messenger working perfectly. My question is, I would like to use my older Blackberry Storm 2 9550 (unlocked) with my present Tmobile BlackBerry plan. However, after the "device change" I could not move my emails perfectly as I would get errors setting up on Storm although I was able to have internet access, use bbm and gps under EDGE signal.
    To fully understand the problem, I tried doing the same procedure onto my other unlocked Bold 9650 device and was able to move and synchronize emails, together with internet access, gps and bbm. I just do not understand why I could not move my emails onto Storm 9550 just like on the Bold 9650 which are basically the same unlocked CDMA phone.
    I have done the following:
    -back up and restore (everything including service books from the present curve 3g to storm2)
    -have done "register now" on host routing table on storm 2
    -checked service books on storm2 and able to find "Email [CMIME]
    -email setup would result to "The application has encountered an error and cannot continue"
    -TCP/IP APN setting set to: epc.tmobile.com
    -Storm 9550 has v5.0.0.1015 (Bundle 1656, Platform 4.2.0.442
    If you could please help me step by step I would really appreciate it. Thanks
    Marc

    Hello marc1075 and welcome to the BlackBerry Support Community Forums.
    Sorry to hear you're having an issue with your Email setup application.
    Backup your device and do a security wipe (click here) and before any data is restored, click on Email settings. Does the same error occur?
    Could you send me a private message with the PIN? I can investigate further for you.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Email going to deleted items Office 365

    I am using Office 365 for small business and have installed a local copy of Outlook on my laptop.  No rhyme or reason, some of my emails wind up in My Deleted Items as Unread.  I have no rules in place, no spam settings in place.  Has anyone
    seen this before.
    Thanks in advance,
    Brad

    First of all, please check this on Outlook Web APP to see if emails still go to Deleted Items folder. If yes, then it’s not an issue on Outlook client side. I would suggest you to check on Exchange Online side.
    On Outlook client side, I would suggest you to run Outlook with /cleanrules switch anyway to clean any hidden rules:Outlook.exe /cleanclientrules
    A corrupted data file also could cause this issue, I would suggest you to use scanpst.exe tool to repair your data file. Please refer to this article on how to use scanpst.exe:
    http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

Maybe you are looking for

  • How can I  connect to SQL server database thru local network by using JSP?

    I'm currently doing a project by using JSP..And I need to display record from the SQL Server database in our school's local network. May I know how can I do that? How can I write the code so that I can able to access the SQL Server databsase Throught

  • Why doesn't text search work for me in Firefox 30?

    Tried out the ctrl+F command, and even when I type a single character, it always come up as red. Another issue that is minor, but still very heavy on power users I'd say, is that when you ctrl+F, it doesn't highlight the search bar immediately/automa

  • Change variable values in a class without acessing it's methods?

    I have the following scenery, a main class with: -ArrayList of strings. -Class frame (with textfield and button) supposed to add strings to that Array. Ok, in main class i set the frame to run, but how to make the frame to change the ArrayList of the

  • Which on is better-ODS/INFOCUBE for reporting

    Hello expert's 1.I want to know which one ODS or INFOCUBES are better (technically/functionally) for reporting purpose in BW.if some one is having any comparisons on ODS/INFOCUBE then plz pass on to me. 2.Are Z tables reliable in case of data updatio

  • Embedded streamin widescreen .MOV truncating width in FireFox

    I am new at embedding streaming .mov video. My embedded .mov at http://www.zenondudasculpture.com/requiemvideo300.html is truncating its width in everyone's FF1.5.0.7 no matter what I try. It runs perfectly in wide-screen in IE, and in standalone QT