Imovie os- multiple images put in cutaway

when i drag and cutaway 1 photo, several get dropped in and crazy fast images play when it is supposed to be one photo in cutaway. any ideas?

That's a good idea, but it isn't quite right for what I'm doing. What i'm doing is making a JList that contains in each cell: a string, another string, and 5 small images. Each should have some space between them.
|"A string" "Another string" XXXXX|
+-+
I've tried this with a JPanel, but when it creates the JList of my array of JPanels, i get the actual JPanel data used by java:
javax.swing.JPanel[,0,0,0x0,invalic,layout=java.awt.FlowLayout,alignmentX=0.0.....etc]I've also searched the API and all the tutorials before I came here, but everyone used setIcon().

Similar Messages

How do I stop iWeb outputting multiple image files? It makes my site slow!

I'm a professional web designer (but don't let that put you off) who uses Dreamweaver and also handcodes HTML & CSS websites at work on a PC, but having got a new Mac for home use I thought I'd give iWeb a go for a personal site hosted on .Mac, showcasing my music and film efforts, that I didn't want to have to think about coding.
I've built a short little site using the attractive 'Travel' theme, just 5 or 6 pages so far, and have not yet added any multimedia content. However, it seemed to take ages to upload it when I published it to .Mac. So then I went to view it, and it was soooo sloooow to download each page, even on my 4mb cable connection. I know it's a fairly graphically-rich theme, but still!
I noticed that it was redrawing the navigation menu each time... and upon close inspection of the HTML code using Safari's 'View Source' to my horror I found out that that each page has a seperate '_files' folder that contains multiple versions of files that are also used in other pages - including navigation buttons and background images. I also saw that every element has styling applied to it 'inline' in the code, rather than in a single seperate style-sheet.
To confirm this I published it to a folder on my hard drive and checked it all out. What a mess!
As a WYSIWYG web page editor iWeb is great but it's an undisputable fact that the HTML markup and CSS code it produces is absolutely appaling. What's worse though is that it also renders whole swaithes of text as images and that it does create seperate folders for each pages content including images, CSS code and navigation buttons - so even though the same images and code are used throughout the site for the background and buttons and layout, they are written out as seperate files and have to be reloaded with every page!!!
This means that the .Mac server must be getting hammered and webpages are very slow to download and slow to render in Safari - it's almost like dialup when I'm viewing my iWebsite, and like I said, I've got a 4mb cable connection!
Looking at the code iWeb produces, it is good to see that tables are not used for layout, and that's one thing in its favour. But surely the whole point of providing 'themed' templates for users is that the same content is used across the site and therefore doesn't need to be created multiple times - one of the benefits of using CSS stylesheets. Why doesn't iWeb create a single stylesheet and make efficient use of repeated images instead of creating multiple instances of the same file for each page?
Perhaps there is a setting somewhere I've missed. If so, let me know someone!
It is a great WYSIWYG editor, but behind the scenes it's not efficient, it's not clean and simple and it's certainly not attractive - and I'm surprised at that coming from Apple! I know iWeb is a great tool for beginners and I'm a picky professional, but if I was Joe Public First Time Web Designer I'd be very annoyed by this.
Clean it up and sort it out Mr Jobs!
PS: Also, where does iWeb store the website whilst it's in production? I can't find it anywhere?

Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
Download iWebBackup Here
You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
http://iWebFAQ.com

How to fade groups of images or multiple images at the same time?

I am creating a flash infographic, and want to fade images I have imported from Illustrator that are grouped. I would like to know how to fade these groups and multiple images at the same time.
Thanks!

Use TweenMax for this.
the syntax is like this:
var arrayOfDisplayObjects:Array = new Array();
//with arrayOfDisplayObjects.push(DisplayObject)
//you can put any DisplayObject in the Array and when you want to fade them call this
TweenMax.allTo(arrayOfDisplayObjects,1, { autoAlpha:0} );
//to fade them in 1 second to alpha=0 and when reaching the zero make them invisible (to save processing power)

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

How do I add multiple images into one file?

I'm sure this is something that's been covered in another post (or even in the help portal) but I think my wording in my search terms are not correct or... I don't know, because I just can't find what I'm looking for.
I want to know how to add multiple images into one file/one image, both horizontally and/or vertically. To give you an idea of what I mean, check out :
http://www.best10apps.com/apps/comic-story,531596060.html
If you scroll down, you'll see a heading entitled : Screenshots of Comic Story. Notice how there's 3 pictures (divided by borders). 2 of those pictures are side by side, and 1 of them is below the first 2 pictures.
I want to know how to add different pictures/images and put them into one picture.

One way is to create template PSD files and populate them with your images using Photoshops scripts.
Photo Collage Toolkit UPDATED June 12, added Picture Package Support via PasteImageRoll and BatchPicturePackage scripts.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
There are eleven scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
Documentation and Examples

How to post multiple images in one blog post using iweb

Hi
I would like to post multiple images in a single blog post. When ever I add a second or third image in the "entry" section of iweb, it does not show up in the blog post on the homepage of the blog. does anyone know if it is even possible to have multiple, separate images in one post, and if so, how.
Here is a link to my blog: http://www.hoopography.com. You can see how there is only one image. I I want to talk about multiple items, I need to create an image in Pages and put them all together. I would really like to break out of the one box (placeholder) mold. I feel so constrained in iweb right now. I think I have done a lot with my blog, but I am always looking to learn more about iweb and improve my blog. Thanks for any help!!!

what's the url of your blog? I'd like to check it out. I'm always interested in learning more about iWeb to improve my blogs. Mine are: http://www.hoopography.com and http://www.wnysportscards.com

Multiple Image Uploading Question

Please forgive my ignorance here but I saw the question on multiple image uploading and this is something i have been trying to do for a few days now without any success.
I am using CS3 with ADDT and PHP
I want to allow my users to be able to upload say 5 pictures at a time, each user has multiple photo albums the names of which are stored in mysql table, the image name is stored in a different table with a reference to the album id.
So, I assume that i put an insert record on the page, I followed the usual process used to have a single image upload and thought it would give me or add the extra file field options on the form when telling the multi upload to allow 5 images to be uploaded, not the case. Do i have to create a form on the page first with 5 file fields or am i just missing the plot here.
Sorry if this is just something that seems simple but i just don't seem to be able to get it to work at all. I have no working example to look over and have serach google to see if there are any tutorials for doing this but can't find any at all.
Thank you in advance of any help and guidance given
Regards
Ray

Hi Günter
Thank you for your reply and also for the great tutorial site you run which has helped me quite a lot with several things.
ok, so i am maybe a little confused here, so what is the multiple image uploader for if not for uploading multiple images, and how does it give you the option to select more than one file or is it that you can't use it when inserting the image file into a database?
Please forgive my ignornace again, i can see when i have tried using the multiple image upload thatit puts a text link called upload, what is that for because it doesn't seem to do anything on the page i have tried it on?
Kind Regards
Ray

How to Watermark multiple images with different dimensions in Photoshop ?

Is there any way that I can place a watermark on the right bottom of multiple images, no matter what dimension the images are? I have tried using Photoshop Scripts > image processor, but it works only for images of same dimension. I want to put watermark on multiple images of different dimensions. This is the output i got.
For the first image the watermark got placed correctly, but for the second image watermark got distracted. As you can clearly see the dimensions are different. Please suggest me some solution.

Open an image to watermark. We must have this open before we start recording an action or else it will keep opening this image and watermarking it over and over again.
In Photoshop go to Windows >> Actions
At the bottom of the Actions Palette you will see a little folder icon, click on it and create a new folder to hold you action in.
Once you have a folder to hold your action we need to hit the Create New Action button (next to the new folder Icon we just used.)
Give our new action a name and set a function key (if required.)
If the record button is not already depressed which it should be by default, hit it now to start recording our action. (located near the folder icon again but this time to the left)
Now that our action is recording go to File >> Place
When the dialog box comes up navigate to your previously created watermark file.
Hit the Place button
Position the watermark as you would normally have it (default is dead center) and hit enter.
Go to File >> Save as,navigate to where you want your watermarked images to finish up and hit save. DO NOT CHANGE THE FILE NAME if you do when you play the batch it will name all the files it saves the same over-writing each other.
Close the image we just watermarked.
when a save dialog comes up do not save the image.
On the Actions Palette hit stop recording.
Our Action is now recorded.
To process an entire folder of images we go to File >> Automate >> Batch
Select the folder in which your images are currently
Select the folder you wish to save the watermarked copies too.
Hit OK
Photoshop is now watermarking all the Images in the selected folder for you.

Multiple image upload CRASH!!! but works with simple image upload

I'm getting MAD.
I'm using php and GD
While the simple image and re size works like a charm, the multiple image upload or the multiple file upload have a strange behavior.
It opens the pop-up with flash, then eventually shows me files or thumbnails but when I try to up load I just wait and get the typical "system becoming unstable" flash error.
As I can see the directory is always generated (I've tried also to put a static directory) but after stargin the upload the flash uploader just crashes and no result.
Any help would be really appreciated

Hi Fonzie,
as the folder is getting created, the issue you´re having is not related to wrong folder permission - it´s something else...
As I wrote before, che common upload and resize function works perfectly
this one works perfectly, because it´s just one file to upload and to process, wheras doing that with multiple files might collide with some settings on your server
So for sure it's not a simple issue as the max filesize
Are you sure ? Did you check the current "max_upload_filesize" setting ? As long you don´t check it, you can´t know :-)
As a general rule of thumb, it´s important to be aware of the fact that uploading & resizing images on the server might collide with several PHP settings -- and the more images you upload and resize in one swoop, the closer you´re getting to these limits respectively might even be exceeding them. The following "directives" are those which have an effect on whether your image/file upload & processing will work or not:
- "max_upload_filesize" :: is sometimes set to just 8 MB on a shared hosting, sometimes 16 MB, sometimes more. This setting will affect the file upload procedure only
- "set_time_limit" (e.g. 30 seconds) :: if the execution time of a script exceeds this limit for whatever reason, the server simply shuts it down without letting you (respectively the flash uploader) know it´s been shut down. This *might* be the reason why ADDT´s flash uploader hangs respectively returns that error message after some time, because it´s waiting for some response from the server which never comes.
- "memory_limit" (e.g. 8 MB) :: this directive is a sort of "allocated server RAM" for your account, and it´s in particular the image resizing process which will grab more or less memory resources -- the higher the the resizing factor is, the more RAM is spent, and the more images are getting resized in one swoop, the worser it gets.
However, all these PHP directives can be changed, and your host might even be so courteous to increase the currently defined values of those abovementioned directives for you -- and that´s what I´m suggesting at this point.
Cheers
Günter Schenk
Adobe Community Expert, Dreamweaver

Key data to multiple images

I feel there must be a way to put the same data to multiple/batch images. e.g. code a batch of images yellow or put the same keywords. Help would be very much appreciated. Thanks, jp.

There are several ways to this:
If you select several images at once in the Browser and use the Metadata Menu from the Aperture Applications menu "Metadata -> Label", "Metadata -> Assign Keywords", "Metadata -> Rating", ... these changes will be applied to all currently selected images at once. You don't actually have to use the menu, the corresponding keyboard shortcuts will work the same.
If you want to change some other metadata tags - title, caption for multiple images, etc, again select the images all at one and use "Metadata -> Batch Change". Select a suitable Metadata preset in the "Add Metadata from" selector and define the values you want to add to all selected image - you can choose if you want to append the new values to the old values or to replace the old values.
An elegant way to change several images at once is to edit one image and to copy these values to a set of several currently selected images. For this use the "Lift&Stamp" tool:
Select the image you want to copy the settings from and then use "Metadata -> Lift Metadata" (or use the "Lift Metadata Button" (the badge withe the up arrow)
In the Lift Metadata HUD deselect any tags and adjustments you do not want to stamp.
Select the images you want to stamp the metadata tags to and stamp using "Metadata -> Stamp Metadata" (or use the "Stamp Metadata Button" (the badge withe the down arrow)
Regards
Léonie

Moving multiple images

I'm using RoboHelp 7.02. I have several images that were
imported into various help files at the top level. This really
clutters up my Project Manager, so I set about the task of putting
all those images into an Image folder.
I was happy to discover that moving an image in Project
Manager updates the links in the topics. But, I cannot select
multiple images. Is there a method unknown to me for selecting
multiple images so I can move them into the Images folder while
updating the links in the topics?
Kevin

As above, it is not possible.
The more people who report a bug or request a feature, the more likely it is to be actioned. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Metatags for multiple images?

I thought this was a no-brainer, but... apparently not:
I needed to add a keyword to several pictures, so I selected them all (from a very large set), clicked the Metadata pane, and entered my keyword, and hit return.
But it didn't stick.
So I tried to add the keyword to ONE image, and realized that "return" didn't "enter" the keyword, only put an actually paragraph return in the keyword field. Weird, but okay.
I then tried entering it for one image, and hitting "tab". Which made the keyword "stick".
So, I went and selected ALL my images again (very arduous and time consuming), and then entered my keyword, and hit "tab".
But it only assigned that keyword to the FIRST image of all the images I had selected.
I ended up having to do "lift/stamp" and choose only "keyword" from the menu. But, am I crazy, or should the way I initially tried to do this work? I mean, it's pretty common sense, right? Select multiple images, enter keyword, and done?
Hmmmm.
Is there a better way to do this?
tx,
e

Hi Jimbo
The User Manual (available directly within Aperture Help, or online) has at least two mechanisms which will address your question: the +Control Bar+ and +Batch Changes+.
The Aperture Interface > Control Bar
http://documentation.apple.com/en/aperture/usermanual/#chapter=2%26section=7
Working with Metadata > Batch Changing Metadata
http://documentation.apple.com/en/aperture/usermanual/#chapter=11%26section=7
I've been using both of these techniques, so I know they definitely work for multiple images.
Hope this helps.
Regards,
Gary

Keywording multiple images

Aperture is making me crazy. As soon as I ressolve on problem (usually with a workaround rather than a solution) another one pops up. Today it's about keywording multiple images.
The manual says I can select a group of images and drag a keyword from the Keyword HUD to apply it to all of the images. But, it doesn't happen. I'm looking at 500 or so images that need multiple keywords applied to them all, but Aperture will only apply the keyword to one image no matter how many I have selected. Surely this cannot be right, but no matter what I do I seem to be able to apply a keyword to only one image at a time.
I purely hat this application. Hate, hate, hate, hate. Been trying to develop a usable workflow for weeks and it's just not happening.

Well, I have a bunch of cameras, and I also do photo restorations (typically pre 1900) for local families out here in the wilderness. The camera that is on my hip all day is just a little Canon A1100 IS, and the JPEGs it produces rarely need anything that Aperture can't handle. I have a couple of Nikons that I use locally, but the really problematic camera that I use a lot is a Fuji HS10. I'm too old to be lugging lenses and heavy bodies up and down mountains, and I frequently find myself on a ledge with a 100 to 1000 foot drop off and not enough room to put both feet side by side. The camera makes a decent picture, but noise is an issue as is lens correction.
The workflow from this camera that I would prefer to use is that I would like to import RAW images directly from the camera into Aperture, naming the project on import. Can't do that because while Adobe supports RAW from this camera, Apple doesn't. So I copy the images from the card to the desktop and run them through DNG Converter.
Then I import into Aperture as a project.
At this point I would prefer to set the white balance in Aperture and open as a TIFF in Camera RAW for Lens Correction and Noise Reduction. Maybe some color correction and exposure stuff too, but that could as easily be done in Aperture.
Then into Photoshop for more accurate color correction, sharpening and whatever else is necessary. Then I'd like to save it back into Aperture as a TIFF and have Aperture automagically select the last edited version in the stack as the pick and keep the stack closed so the last edited version is all I ever see.
Unfortunately, this breaks down in several places. The biggest is that if I have PS open the TIFF in Camera Raw it breaks the connection to the file in Aperture, so when I save out of Photoshop it is treated as a Save As. Apple appears to insist on a .tiff extension while Adobe really wants a .tif extension. I can tell PS to not use any extension, but then I have to remember to add the .tiff manually, and that is a pain and I always forget. Not an option.
So, what I do is import the DNG, set the white balance in Aperture and then run the Dfine (hope I spelled that right) plug-in which saves out as a TIFF. Then I open in Photoshop and do the lens correction (which does not work quite as well with the available lens profile as Camera Raw does) and do whatever else is needed in Photoshop.
But, aside from not being able to use Camera RAW it's really the little things that make me crazy. Always having to remember to do a CMD\ to set the most recently edited version as the pick is something I need to do, but forget at least half the time. Also having to close the stack every time. I have too much to do, and I ought to have an option to do that automagically IMHO. Those little details help prevent screw ups and keep me focused on images instead of filing. I am a very poor file clerk. That's what software is for.

Restrict image pixel size in multiple image upload

Re: Multiple Image Upload behaviour.
One of the only issues I have with this extension is if users try to upload an image within the limits I set (of 250Kb) but with a high pixel count.
For example, a jpg of 800 x 600 at 200Kb causes no problem, but a one of 2000 pixels at 150Kb probably will.
I understand that there is probably more server load to resize a large pixel image, so is there a way to check the pixel size of images to be uploaded as well as the file size and reject it if it is too large?

But what you could do, is retrieving the php.ini´s "post_max_size" value and display a note to your site visitors:
 
 
1. put this into the doc´s head:
 
 <?php $replace_max_size_MB = str_replace("M"," MB",ini_get('post_max_size')); ?>
 
 
2. the related message:
 
 Pics larger than <?php echo $replace_max_size_MB; ?> will be rejected by the server
 
 Cheers,
 Günter Schenk
 Adobe Community Expert, Dreamweaver

Insert multiple images

How to insert multiple images into html document ?
From the menu Insert > Image you can't choose more than 1 image... how strange is that ?!?

Well ... here's one way you can put 100 photos onto a page in DWCS4
First - be sure all photos are web ready - I had one straight from my camera and at 4+MB it was a bit TOO LARGE!)
Next - have them in a folder outside of DW and select them.
Next - drag them into Design View and drop them and answer all the popup screens
Like this:
Respond to the following:
And Picture One is there .... continue several hundred more times (though is goes pretty fast)
and now there are five ....
And in a browser -
And browser resized -
Hope this helps ..... But like Nancy says "Happy Clicking"

Imovie os- multiple images put in cutaway

Similar Messages

Maybe you are looking for