Impact of server load on database

Hi,
We have a database 10.2.0.1 on linux 4. Load average ( top command) is normally 8 on the server. From last two days it is fluctuating from 12 to max 28. No recent changes have been made on daabase or application or on server itself. I have awr reports every hour. I compared the sqls execution plans and could not find any difference. Overall database is busy in last two days which was exepected. In past even if we have more transactions, load on server is always less than 12. Another thing I notice in AWR reports comparison (May 20 and May 23 ) is for three sql statements elapsed time changes from 0.15 to 0.25 or gets per execution is very less as compare to execution on May 20.
I need some help in investigation. Also IO on server is much higher from last two days.
Thanks.

RPG wrote:
Hi,
We have a database 10.2.0.1 on linux 4. Load average ( top command) is normally 8 on the server. From last two days it is fluctuating from 12 to max 28. No recent changes have been made on daabase or application or on server itself. I have awr reports every hour. I compared the sqls execution plans and could not find any difference. Overall database is busy in last two days which was exepected. In past even if we have more transactions, load on server is always less than 12. Another thing I notice in AWR reports comparison (May 20 and May 23 ) is for three sql statements elapsed time changes from 0.15 to 0.25 or gets per execution is very less as compare to execution on May 20.
I need some help in investigation. Also IO on server is much higher from last two days.
Thanks.how many cores/CPUs does this system have?
post FORMATTED results from doing same as below; which will take 60 seconds to complete
vmstat 6 10
[oracle@localhost ~]$ vmstat 6 10
procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------
r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa st
0  0  97204 133580  57884 386108    0    1     5    28   39   70  1  2 97  0  0
0  0  97204 133316  57904 386116    0    0     3    23 1056 1177  0  1 98  0  0
0  0  97204 133332  57912 386116    0    0     0     8  997 1096  1  2 98  0  0
0  0  97204 129612  57928 386112    0    0     1    71 1003 1086  2  3 95  0  0
2  0  97204 128992  57936 386120    0    0     0    25 1004 1029  1  1 98  0  0
0  0  97204 128992  57952 386120    0    0     0    15 1001 1017  1  1 99  0  0
0  0  97204 128992  57960 386120    0    0     0    13 1001 1043  1  1 99  0  0
0  0  97204 128984  57976 386120    0    0     0    17 1000 1046  1  2 98  0  0
0  0  97204 133192  57984 386120    0    0     0    19 1078 1109  1  4 95  0  0
0  0  97204 133200  58000 386120    0    0     0    48 1002  999  2  3 96  0  0
[oracle@localhost ~]$

Similar Messages

  • High Database server load from expensive SQL statements

    Dear all,
    I am facing problem in the production  sever there is high Database server load from expensive SQL statements as per EVA report
    Buffer Load [%]     Disk Load [%]     CPU Load [%]
    55     69     0
    Analysis of DB SQL CACHE
    EXPENSIVE SQL STATEMENTS OVERVIEW
    Object Name     CPU Load [%]     I/O Load [%]     Elapsed Time [%]     Executions     Records Processed
    BSIS        1     9     0     22     90462
    CDEF$     6     6     0     2131113     2575694
    BSAD     1     3     0     21     408576
    MKPF     1     32     0     180     3899
    ICOL$     9     1     0     2575694     8703798
    OBJ$     6     1     0     3405254     3400023
    COL$     12     0     0     2138793     22919657
    MKPF     1     13     0     75     396
    MCHB     7     0     0     366543     41708
    Please suggest the step by step to reduce  the  expensive SQL  from these table.
    Regards

    Hi,
    In tx code ST05 i have find the following deatails.
    Duration |Obj. name |Op.    |Recs.|RC    |Statement  
         4 TSP03A     REOPEN             0 SELECT WHERE "NAME" = 'LOCL' AND "P" = 'S_CLIENTS'                                                                                344 TSP03A     FETCH       1      0                                                                                42 ZRIN    DECLARE            0 SELECT WHERE "MANDT" = :A0 AND "BCQ" = :A1                                                                                442 ZRIN    PREPARE            0 SELECT WHERE "MANDT" = :A0 AND "BCQ" = :A1                                                                                3 ZRIN    OPEN               0 SELECT WHERE "MANDT" = '600' AND "BCQ" = 'BCQ'                                                                               
    2,181,565 ZRIN  FETCH       4   1403                                                                               
    706,267 DBA_SEGME FETCH      99      0                                                                                8,248 DBA_SEGME FETCH      99      0                                                                                44,994 DBA_SEGME FETCH      99      0                                                                                67,713 DBA_SEGME FETCH      99      0   
    1,367,923 DBA_SEGME FETCH      99      0
      16,735|TADIR     |FETCH  |    1|  1403|                                                                                |
    5
    TADIR
    REOPEN
    0
    SELECT WHERE "PGMID" = 'R3TR' AND "OBJECT" = 'TABL' AND "OBJ_NAME" = 'CME__TEXT'
    22,415
    TADIR
    FETCH
    1
    1403
    4
    TADIR
    REOPEN
    0
    SELECT WHERE "PGMID" = 'R3TR' AND "OBJECT" = 'TABL' AND "OBJ_NAME" = 'CME_PATTERN_SIGN'
    232
    TADIR
    FETCH
    1
    1403
    4
    TADIR
    REOPEN
    0
    SELECT WHERE "PGMID" = 'R3TR' AND "OBJECT" = 'TABL' AND "OBJ_NAME" = 'CML_ARC_DEADLINE'
    19,189
    TADIR
    FETCH
    1
    1403
    4
    TADIR
    REOPEN
    706,267
    DBA_SEGME
    FETCH
    99
    0
    |
    44,994
    DBA_SEGME
    FETCH
    99
    0
    67,713
    DBA_SEGME
    FETCH
    99
    0
    Please suggest how to  reduce it.
    Regards,

  • Log on to remote server and start database -error while installing CI in HA

    Hello All,
    We are installing ECC 6.0 with High Availability using HP-UX. We have completed installation in ASCS and Database Instance. Now when were trying to install in Central Instance, we encountered an error at Start Instance which informed us to Log on to remote server and start database. However the database is already running in DB node.  Please find the log below.
    TRACE      2011-06-10 16:31:45.825 [syuxctask.cpp:1382]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 25742
    INFO       2011-06-10 16:31:45.835
               CJSlibModule::writeInfo_impl()
    Output of /usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001 is written to the logfile start_PE2_DVEBMGS01.log.
    WARNING    2011-06-10 16:31:46.345
               CJSlibModule::writeWarning_impl()
    Execution of the command "/usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001" finished with return code 6. Output:
    Database PE2 must be started on remote server
    Log on to remote server and start database
    WARNING[E] 2011-06-10 16:31:46.355
               CJSlibModule::writeError_impl()
    CJS-20022  Could not start instance 'DVEBMGS01' of SAP system PE2.
    TRACE      2011-06-10 16:31:46.355 [iaxxejsbas.hpp:408]
               handleException<ESAPinstJSError>()
    Converting exception into JS Exception EJSException.
    TRACE      2011-06-10 16:31:46.355
    Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.webas.startInstanceFailed
    WARNING[E] 2011-06-10 16:31:46.355
               CJSlibModule::writeError_impl()
    CJS-20022  Could not start instance 'DVEBMGS01' of SAP system PE2.
    TRACE      2011-06-10 16:31:46.355 [iaxxejsbas.hpp:483]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    TRACE      2011-06-10 16:31:46.405 [syuxctask.cpp:1382]
               CSyTaskImpl::start(bool)
    A child process has been started. Pid = 25793
    ERROR      2011-06-10 16:31:46.525 [sixxcstepexecute.cpp:950]
    FCO-00011  The step start with step key |NW_ABAP_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
    TRACE      2011-06-10 16:31:46.555 [iaxxgenimp.cpp:752]
                CGuiEngineImp::showMessageBox
    <html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Central Instance . You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/CI. </p> </body></html>
    TRACE      2011-06-10 16:31:46.555 [iaxxgenimp.cpp:1255]
               CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    Kindly let us know how to rectify the error and prroceed further with the instalaltion.
    Thanks
    Rishi

    Dear Guys,
    we didnt change the date and time but i m very sure it is same trans.log file.
    for your kind information please note SID and Nodes details
    Sid (PE2)
    DB Node : DBMDB001
    CI Node :   DBMCI001
    also i am attaching starting part of the file.
    4 ETW000 R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 07.11.2010 - 03:44:06
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Sun Nov  7 03:44:06 2010                             295  0.000295
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    22  0.000317
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                            116  0.000433
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' ...
    4 ETW000                                                                              64  0.000497
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/PC1/SYS/exe/run/dboraslib.so), hdl 0
    4 ETW000                                                                           32161  0.032658
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' loaded
    4 ETW000                                                                              39  0.032697
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library
    /usr/sap/PC1/SYS/exe/run/dboraslib.so
    4 ETW000                                                                             111  0.032808
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/PC1/SYS/exe/run/dboraslib.so' is "700.08",
    patchlevel (0.25)
    4 ETW000                                                                             265  0.033073
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library
    /usr/sap/PC1/SYS/exe/run/dboraslib.so
    4 ETW000                                                                              41  0.033114
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library
    /usr/sap/PC1/SYS/exe/run/dboraslib.so
    4 ETW000                                                                              82  0.033196
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              52  0.033248
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES,
    reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              41  0.033289
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         84  0.033373
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              31  0.033404
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES,
    reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              37  0.033441
    4 ETW000  [dev trc     ,00000]  Oracle Client Version: '10.2.0.4.0'                  601  0.034042
    4 ETW000  [dev trc     ,00000]  -->oci_initialize (con_hdl=0)                         25  0.034067
    4 ETW000  [dev trc     ,00000]  Client character set UTF16 -> UTF8                 35674  0.069741
    4 ETW000  [dev trc     ,00000]  Client NLS setting (OCINlsGetInfo): 'AMERICAN_AMERICA.UTF8'
    4 ETW000                                                                              57  0.069798
    4 ETW000  [dev trc     ,00000]  Logon as OPS$-user to get SAPSR3's password           55  0.069853
    4 ETW000  [dev trc     ,00000]  Connecting as /@PC1 on connection 0 (nls_hdl 0) ... (dbsl 700
    151208)
    4 ETW000                                                                              34  0.069887
    4 ETW000  [dev trc     ,00000]  Nls CharacterSet                 NationalCharSet              C     
    EnvHp      ErrHp ErrHpBatch
    4 ETW000                                                                              52  0.069939
    4 ETW000  [dev trc     ,00000]    0 UTF8                                                      0
    0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
    4 ETW000                                                                              58  0.069997
    4 ETW000  [dev trc     ,00000]  Allocating service context handle for con_hdl=0       40  0.070037
    4 ETW000  [dev trc     ,00000]  Allocating server context handle                      27  0.070064
    4 ETW000  [dev trc     ,00000]  Attaching to DB Server PC1
    (con_hdl=0,svchp=0x600000000106aa68,srvhp=0x600000000106de78)
    4 ETW000                                                                              63  0.070127
    4 ETW000  [dev trc     ,00000]  Assigning server context 0x600000000106de78 to service context
    0x600000000106aa68
    4 ETW000                                                                           60612  0.130739
    4 ETW000  [dev trc     ,00000]  Allocating user session handle                        97  0.130836
    4 ETW000  [dev trc     ,00000]  Starting user session: OCISessionBegin(con_hdl=0,
    usr='/',svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
    4 ETW000                                                                              64  0.130900
    4 ETW000  [dev trc     ,00000]  Assigning user session 0x60000000010fc940 to service context
    0x600000000106aa68
    4 ETW000                                                                            9302  0.140202
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=53, stmth_p=0x6000000001077608)
    4 ETW000                                                                             198  0.140400
    4 ETW000  [dev trc     ,00000]         BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1); END;        
    4 ETW000                                                                              38  0.140438
    4 ETW000  [dev trc     ,00000]  CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more
    erroneous calls
    4 ETW000                                                                             291  0.140729
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001078660)
    4 ETW000                                                                              33  0.140762
    4 ETW000  [dev trc     ,00000]         BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;       
    4 ETW000                                                                              35  0.140797
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
    4 ETW000                                                                             937  0.141734
    4 ETW000  [dev trc     ,00000]         SELECT SID FROM V$MYSTAT WHERE ROWNUM<2                                                                               
    4 ETW000                                                                              36  0.141770
    4 ETW000  [dev trc     ,00000]  Connected to session 297.                            639  0.142409
    4 ETW000  [dev trc     ,00000]  Now '/@PC1' is connected: con_hdl=0, nls_hdl=0, session_id=297.
    4 ETW000                                                                              38  0.142447
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
    4 ETW000                                                                              37  0.142484
    4 ETW000  [dev trc     ,00000]         ALTER SESSION SET NLS_SORT = BINARY                                                                               
    4 ETW000                                                                              36  0.142520
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
    4 ETW000                                                                             327  0.142847
    4 ETW000  [dev trc     ,00000]         SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
    4 ETW000                                                                              36  0.142883
    4 ETW000  [dev trc     ,00000]  Got SAPSR3's password from OPS$-user                 728  0.143611
    4 ETW000  [dev trc     ,00000]  Disconnecting from connection 0 ...                   38  0.143649
    4 ETW000  [dev trc     ,00000]  Rolling back transaction ...                          31  0.143680
    4 ETW000  [dev trc     ,00000]  Closing user session
    (con_hdl=0,svchp=0x600000000106aa68,usrhp=0x60000000010fc940)
    4 ETW000                                                                             210  0.143890
    4 ETW000  [dev trc     ,00000]  Now I'm disconnected from ORACLE                     721  0.144611
    4 ETW000  [dev trc     ,00000]  Connecting as SAPSR3/<pwd>@PC1 on connection 0 (nls_hdl 0) ... (dbsl
    700 151208)
    4 ETW000                                                                              40  0.144651
    4 ETW000  [dev trc     ,00000]  Nls CharacterSet                 NationalCharSet              C     
    EnvHp      ErrHp ErrHpBatch
    4 ETW000                                                                              37  0.144688
    4 ETW000  [dev trc     ,00000]    0 UTF8                                                      0
    0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
    4 ETW000                                                                              37  0.144725
    4 ETW000  [dev trc     ,00000]  Assigning username to user session: con_hdl=0,
    usrhp=0x60000000010fc940
    4 ETW000                                                                              35  0.144760
    4 ETW000  [dev trc     ,00000]  Assigning password to user session: con_hdl=0,
    usrhp=0x60000000010fc940
    4 ETW000                                                                              40  0.144800
    4 ETW000  [dev trc     ,00000]  Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>,
    svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
    4 ETW000                                                                             337  0.145137
    4 ETW000  [dev trc     ,00000]  Assigning user session 0x60000000010fc940 to service context
    0x600000000106aa68
    4 ETW000                                                                            4085  0.149222
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001077608)
    4 ETW000                                                                              63  0.149285
    4 ETW000  [dev trc     ,00000]         BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;       
    4 ETW000                                                                              37  0.149322
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
    4 ETW000                                                                             585  0.149907
    4 ETW000  [dev trc     ,00000]         SELECT SID FROM V$MYSTAT WHERE ROWNUM<2                                                                               
    4 ETW000                                                                              36  0.149943
    4 ETW000  [dev trc     ,00000]  Connected to session 297.                            350  0.150293
    4 ETW000  [dev trc     ,00000]  Now 'SAPSR3/<pwd>@PC1' is connected: con_hdl=0, nls_hdl=0,
    session_id=297.
    4 ETW000                                                                              38  0.150331
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
    4 ETW000                                                                              38  0.150369
    4 ETW000  [dev trc     ,00000]         ALTER SESSION SET NLS_SORT = BINARY                                                                               
    4 ETW000                                                                              34  0.150403
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
    4 ETW000                                                                             294  0.150697
    4 ETW000  [dev trc     ,00000]         SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN
    ('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
    4 ETW000                                                                              66  0.150763
    4 ETW000  [dev trc     ,00000]         ETER                                                                               
    4 ETW000                                                                              34  0.150797
    4 ETW000  [dev trc     ,00000]  Database NLS settings: AMERICAN_AMERICA.UTF8         329  0.151126
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
    4 ETW000                                                                             856  0.151982
    4 ETW000  [dev trc     ,00000]         SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR
    (STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE           
    4 ETW000                                                                              36  0.152018
    4 ETW000  [dev trc     ,00000]  DB instance PC1 is running on scmdb001 with ORACLE version
    10.2.0.4.0 since NOV 07, 2010, 03:23:10
    4 ETW000                                                                             349  0.152367
    4 ETW000  [dev trc     ,00000]  -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
    4 ETW000                                                                              38  0.152405
    4 ETW000  [dev trc     ,00000]         SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS')
    FROM V$DATABASE

  • ORA-12709: error while loading create database character set

    I installed Oracle 8.05 on Linux successfully: was able to login
    whith SQLPlus, start and stop the db whith svrmgrl etc.
    During this install I chose WE8ISO8859P9 as the database
    characterset when prompted.
    After that I installed Oracle Application Server 3.02, and now
    I'm getting the
    ORA-12709: error while loading create database character set
    message when I try to start up the database, and the database
    won't mount.
    Platform is RedHat Linux 5.2.
    NLS_LANG set to different settings,
    e.g. AMERICAN_AMERICA.WE8ISO8859P9
    but without success.
    Anyone any clue?
    Thanks!
    null

    Jogchum Reitsma (guest) wrote:
    : I installed Oracle 8.05 on Linux successfully: was able to
    login
    : whith SQLPlus, start and stop the db whith svrmgrl etc.
    : During this install I chose WE8ISO8859P9 as the database
    : characterset when prompted.
    : After that I installed Oracle Application Server 3.02, and now
    : I'm getting the
    : ORA-12709: error while loading create database character set
    : message when I try to start up the database, and the database
    : won't mount.
    : Platform is RedHat Linux 5.2.
    : NLS_LANG set to different settings,
    : e.g. AMERICAN_AMERICA.WE8ISO8859P9
    : but without success.
    : Anyone any clue?
    : Thanks!
    You can create the database with WE8DEC character set
    and to use the WE8ISO8859P9 on the client or even on Linux.
    The NLS_LANG setting doesn't effect the database, but the
    interface with the database. The same setting can be used in de
    windows 95/98/NT registry.
    null

  • ORA-12709: error while loading create database character set after upgrade

    Dear All
    i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
    current application version 12.0.6
    please help me to resolve it.
    SQL> startup;
    ORACLE instance started.
    Total System Global Area 1.2831E+10 bytes
    Fixed Size 2171296 bytes
    Variable Size 2650807904 bytes
    Database Buffers 1.0133E+10 bytes
    Redo Buffers 44785664 bytes
    ORA-12709: error while loading create database character set
    -bash-3.00$ echo $ORA_NLS10
    /u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
    export ORACLE_BASE=/u01/oracle
    export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
    export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
    export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
    export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
    export ORACLE_SID=PROD
    -bash-3.00$ pwd
    /u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
    -bash-3.00$ ls -lh |more
    total 56912
    -rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
    -rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
    -rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
    -rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
    -rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
    -rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
    -rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
    -rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
    -rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
    -rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
    -rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
    -rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
    -rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
    -rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
    -rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
    -rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
    -rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
    -rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
    -rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
    -rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
    -rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
    -rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
    -rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
    -rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
    -rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
    -rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
    -rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
    -rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
    Starting up:
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options.
    ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
    System name: SunOS
    Node name: proddb3.zakathouse.org
    Release: 5.10
    Version: Generic_147440-19
    Machine: sun4u
    Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
    System parameters with non-default values:
    processes = 200
    sessions = 400
    timed_statistics = TRUE
    event = ""
    shared_pool_size = 416M
    shared_pool_reserved_size= 40M
    nls_language = "american"
    nls_territory = "america"
    nls_sort = "binary"
    nls_date_format = "DD-MON-RR"
    nls_numeric_characters = ".,"
    nls_comp = "binary"
    nls_length_semantics = "BYTE"
    memory_target = 11G
    memory_max_target = 12G
    control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
    control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
    control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
    db_block_checksum = "TRUE"
    db_block_size = 8192
    compatible = "11.2.0.0.0"
    log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
    log_archive_format = "%t_%s_%r.dbf"
    log_buffer = 14278656
    log_checkpoint_interval = 100000
    log_checkpoint_timeout = 1200
    db_files = 512
    db_file_multiblock_read_count= 8
    db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
    db_recovery_file_dest_size= 14726M
    log_checkpoints_to_alert = TRUE
    dml_locks = 10000
    undo_management = "AUTO"
    undo_tablespace = "APPS_UNDOTS1"
    db_block_checking = "FALSE"
    session_cached_cursors = 500
    utl_file_dir = "/usr/tmp"
    utl_file_dir = "/usr/tmp"
    utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
    utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
    utl_file_dir = "/usr/tmp"
    plsql_code_type = "INTERPRETED"
    plsql_optimize_level = 2
    job_queue_processes = 2
    cursor_sharing = "EXACT"
    parallel_min_servers = 0
    parallel_max_servers = 8
    core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
    audit_file_dest = "/u01/oracle/admin/PROD/adump"
    db_name = "PROD"
    open_cursors = 600
    pga_aggregate_target = 1G
    workarea_size_policy = "AUTO"
    optimizer_secure_view_merging= FALSE
    aq_tm_processes = 1
    olap_page_pool_size = 4M
    diagnostic_dest = "/u01/oracle"
    max_dump_file_size = "20480"
    Tue Jan 15 16:16:02 2013
    PMON started with pid=2, OS id=18608
    Tue Jan 15 16:16:02 2013
    PSP0 started with pid=3, OS id=18610
    Tue Jan 15 16:16:03 2013
    VKTM started with pid=4, OS id=18612 at elevated priority
    VKTM running at (10)millisec precision with DBRM quantum (100)ms
    Tue Jan 15 16:16:03 2013
    GEN0 started with pid=5, OS id=18616
    Tue Jan 15 16:16:03 2013
    DIAG started with pid=6, OS id=18618
    Tue Jan 15 16:16:03 2013
    DBRM started with pid=7, OS id=18620
    Tue Jan 15 16:16:03 2013
    DIA0 started with pid=8, OS id=18622
    Tue Jan 15 16:16:03 2013
    MMAN started with pid=9, OS id=18624
    Tue Jan 15 16:16:03 2013
    DBW0 started with pid=10, OS id=18626
    Tue Jan 15 16:16:03 2013
    LGWR started with pid=11, OS id=18628
    Tue Jan 15 16:16:03 2013
    CKPT started with pid=12, OS id=18630
    Tue Jan 15 16:16:03 2013
    SMON started with pid=13, OS id=18632
    Tue Jan 15 16:16:04 2013
    RECO started with pid=14, OS id=18634
    Tue Jan 15 16:16:04 2013
    MMON started with pid=15, OS id=18636
    Tue Jan 15 16:16:04 2013
    MMNL started with pid=16, OS id=18638
    DISM started, OS id=18640
    ORACLE_BASE from environment = /u01/oracle
    Tue Jan 15 16:16:08 2013
    ALTER DATABASE MOUNT
    ORA-12709 signalled during: ALTER DATABASE MOUNT...

    ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
    Please see these docs.
    ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
    Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
    Ora-12709 While Trying To Start The Database [ID 311035.1]
    ORA-12709 when Mounting the Database [ID 160478.1]
    How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
    Thanks,
    Hussein

  • Cannot Load Backup-database cmdlet in powershell v 3.0

    I am trying to work around with writing powershell script to backup sql server 2008 R2 database but the example i have searched they
    require to add backup-sqldatabase cmdlet, but i am unable to see neither SQLPS or backup-sqldatabase cmdlets, I have recently ugraded to powershell v3 and i am running windows server2008 R2 and SQL Server 2008 R2.
    Also there is a confusion  windows
    server 2008R2 is a virtual server i am using, but i downloaded powershell on my local desktop and for some reason it loads SQLps and backup-sqldatabase cmdlets
    There is no database installed on my local machine but as soon as i type backup-sqldatabase i get to see the cmdlet on screen

    See the top part of this post
    on how to get SQLPS module.
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

  • How to connect java project to sql server 2008 r2 database

    i want to create an java application which has to create a database and later access it. My problem is that i am not able to connect sql server 2008 r2 database driver on to the netbeans.i have sql server 2008 r2 installed on my system.please
    suggest me the step by step procedure to establish the connection

    Hi ENG,
    To establish a connection to SQL Server from a Java project, you have to download the JDBC driver for SQL Server from
    here.
    After extracting the jar files(like sqljdbc.jar) from the above link, add the driver to the netbeansIDE.
    Test establishing a connection with the below Java Class.
    import java.sql.*;
    public class Test {
    public static void main(String[] srg) {
    String driverName = "com.microsoft.sqlserver.jdbc.SQLServerDriver"; //load the jdbc driver
    String dbURL = "jdbc:sqlserver://localhost:1433; DatabaseName=test"; //connection string to the db hosted on localhost
    String userName = "sa"; //user name
    String userPwd = "123456"; //password
    Connection dbConn;
    try {
    Class.forName(driverName);
    dbConn = DriverManager.getConnection(dbURL, userName, userPwd);
    System.out.println("Connection Successful!"); //print Connection Successful! if connection establishes
    } catch (Exception e) {
    e.printStackTrace();
    A demonstration video from Youtube for you reference.
    Connect NetBeans Project with Microsoft SQL Server 2008 - YouTube
    Since this is a question regarding Java, I suggest you post your subsequent questions to a java dedicated forum. It is appropriate and more experts will assist you.
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

  • SSMA "Loading to database new table File Name.dbo[Table] ...sql execution failed

    In this case I had already processed this table once before 'no changes' and processed the second time I received this error ...sql execution Failed. It's like the sql server 2008 R2 doesn't see or detect the process. Starting Phase #0 Synchronizing Database:
    then it shows 'Loading to database new table file name.dbo[table] ... sql execution failed (this is my issue)

    Hi TheJudge2,
    Based on my understanding, you have installed SQL Server Migration Assistant successfully then you perform migration. After migration, you can’t find the table which you want to migrate to SQL Server 2008 R2 under the database in your SQL Server Management
    Studio, then you perform migration again. Then error message “Loading to database new table file name.dbo[table] ... sql execution failed” is thrown out. Please correct me if I misunderstand your meaning.
    Firstly, I would like to know whether you perform migration from Access database to SQL Server. I have performed migration from Access database to SQL Server in my lab environment.  Based on my test, I could migrate Access database to SQL Server successfully
    and table existed under the database in SQL Server Management Studio after migration.
    Besides, “sql execution failed” is a general error message. It is hard to find out the cause from this error message. Please check the information under the Output in SQL Server Migration Assistant again. It would be better if you can provide the complete
    output information for our deep analysis.
    Best regards,
    Qiuyun Yu

  • Portal Install Fails During "Load Java Database Content"

    Hi,
    I'm installing our production enterprise portal and it is failing on
    the following step:
    "Load Java Database Content"
    When I load at the jload.log I see the following error message:
    20.06.06 14:11 com.sap.inst.jload.Jload main
    INFO: Jload -sec
    EPP,jdbc/pool/EPP,D:\usr\sap\EPP\SYS\global/security/data/SecStore.properties,D:\usr\sap\EPP\SYS\global/security/data/SecStore.key -dataDir
    Z:/NW04PortalCDs/DVD_JAVA\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\Program
    Files\sapinst_instdir/IMPORT.XML -log C:\Program
    Files\sapinst_instdir/jload.log
    20.06.06 14:11 com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    java.sql.SQLException: [SAP NetWeaver][SQLServer JDBC Driver][SQLServer]Login failed for user 'SAPEPPDB'. Reason: Not associated with a trusted
    SQL Server connection.
    Our landscape is as follows:
    production portal server - serverA
    production datbase instance (clustered) - serverB
    production database server (cluster) - serverB(virtual name)The portal is sharing a database with our R3 production server.
    I've noticed that the user SAPEPPDB exists in the database as a windows
    user and I've given that user all roles in the database but it is still
    unable to connect.
    Please help.
    Regards,
    Jeff

    Did you get an answer back on this? I am getting the same problem

  • Failing to load 11g database on Win 7

    Hi everyone,
    Hope l find you well. I am facing a challenge on loading 11g database on Windows 7 OS. It is giving an error message on 85% saying "......setup has failed to execute utillity tool: ADR Setup Utility. Please assist me
    Regards.

    l dont know which version of 11g this is, its just written Oracle Database 11g and am using Windows 7 Professional.
    Here's the error message thats coming:
    A pop up comes just after 85% saying:
    Error in execution of additional utility tool.
    Help Retry Continue Cancel
    then if you say continue, another pop up comes which says:
    OUI-25031: Some of the Configuration Assistants failed/Cancelled. It is stronglt recommended that you retry the configuration assistant at this time
    1. Check the details panel on the configuration assistant screen to see the errors resulting in these failures
    2. Fix the errors causing these failures
    3. Select the failed assistant and click retry button to retry them
    The following is what is in the details panel:
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = C:\Windows\system32\cmd /c call C:\app\baba munya\product\11.1.0\db_1/bin/netca.bat /orahome C:\app\baba munya\product\11.1.0\db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\app\baba munya\product\11.1.0\db_1\network\install\netca_typ.rsp
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "C:\app\baba munya\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------

  • CRM 2007 The Java load in database SID/hostname has already been configured.

    I had an CRM 2007 system on windows server 2008R2. I had an issue in CI system and reinstall it. But I got a problem when the java already configured in database. My database is very important so I can remove schema. I chose CRM2007>Oracle>ABAP+JAVA>HA system>Central Instance in the sapinst.
    CJS-30109  The Java load in database GOL/crmdb has already been configured. SOLUTION: Remove the schema and load it with a new load before you run this installation.
    Thanks

    Hello Ashutosh ,
    Thanks for your reply.
    We have gone followed the below sequence:
    SCS Installation
    Database Instance Installation using backup/restore method
    CI installation. -> getting error, when we provide the Java Components DVD.
    Best Regards,
    Anuj

  • Can not load the database homepage-help

    Hi, dear all, i got the problem for loading the database home page tho.
    the URL: http://127.0.0.1:8080/htmldb
    the error accured saying: cant find the page.
    what should i try to connect it?
    anyone's prompt reply would be much appreciated.
    Cheers,

    Can you ping 127.0.0.1 ?
    Please also find a file called hosts on your PC. Mine is in a directory called C:\WINNT\system32\drivers\etc
    What is the content of this file ? Mine looks like this. Please also paste yours
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    127.0.0.1 localhost

  • Issue while loading berkeley database

    Hi,
    I have an issue while loading data into the Berkeley Database. When I load the xml files into Berkeley database, some files are being created. the files are named something like db.001,db.002,log.00000001 etc. I have a server running which tries to access the files .When I try to reload the Berkeley db while my server is running, I am unable to load the Berkeley database. I have to stop the server, load the berkeley DB and restart the server again . Is there any way in which I can reload the database without having to restart the server. Your response would be of help to me to find a solution to this issue. I am currently using Berkeley Database version 2.2.13
    Thanks,
    Priyadarshini
    Message was edited by: Priyadarshini
    user569257

    Hi Priyadarshini,
    The db.001 and db.002 are the environment's region files and the log.00000001 is one of the environment's transactional logs. The region files are created when you use an environment, and their size and number depend on the subsystems that you configure on your environment (memory pool, logging, transactions, locking). The log files reflect the modifications that you perform on your environment's database(s), and they are used along with the transaction subsystem to provide recoverability, ACID capabilities and protect against application or system failures.
    Is there a reason why that server tries to access these files ? The server process that runs while you load your database should not interfere with those files as they are used by Berkeley DB.
    Regards,
    Andrei

  • Error retrieving REN server URL from database

    Getting the following error in MCFLOG1 and USQSRV1 log files. Checked all published REN solution guide, nothing really worked. REN server seems to be working though. Coming from loadbalancerURL.peoplesoft.com it pings and REN features work. Ren is set up using machine names though. If logging in directly to machinename.peoplesoft.com REN ping fails with Forbidden error, but that could be a caching issue. I am worried about the log files below and the app. server performance deterioration which may or may not be related.
    We have machine1 with web/app (REN is configured there) and machine two with web/app on it. Also, there is an F5 load balancer in front of them. Any thoughts?
    PSMCFLOG1.5324 (0) [07/09/12 00:18:16](1) (PSMCFLOG1): Error retrieving REN server URL from database
    PSMCFLOG1.5324 (0) [07/09/12 00:19:16](1) (PSMCFLOG1): Error retrieving REN server URL from database
    PSMCFLOG1.5324 (0) [07/09/12 00:20:16](1) (PSMCFLOG1): Error retrieving REN server URL from database
    PSMCFLOG1.5324 (0) [07/09/12 00:21:16](1) (PSMCFLOG1): Error retrieving REN server URL from database
    PSMCFLOG1.5324 (0) [07/09/12 00:22:16](1) (PSMCFLOG1): Error retrieving REN server URL from database

    I restarted the services and the error stopped.
    Thanks
    Ramya

  • Jasper report on HTML when one image loaded from database and for the other

    How to generate jasper report on HTML when one image loaded from database and for the other we give a image path
    My code
    ByteArrayOutputStream baos = new ByteArrayOutputStream();
              exporter = new JRHtmlExporter();
              exporter.setParameter(JRExporterParameter.JASPER_PRINT, print);
              exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, baos);
              exporter.setParameter(JRHtmlExporterParameter.IMAGES_URI, strImageInputDirectory);
         exporter.setParameter(JRHtmlExporterParameter.IMAGES_DIR_NAME, strImageOutputPath == null ? "." : strImageOutputPath);
         exporter.setParameter(JRHtmlExporterParameter.IS_OUTPUT_IMAGES_TO_DIR, Boolean.TRUE);
         exporter.setParameter(JRHtmlExporterParameter.IS_USING_IMAGES_TO_ALIGN, Boolean.FALSE);
         exporter.setParameter(JRHtmlExporterParameter.IS_WHITE_PAGE_BACKGROUND, Boolean.FALSE);
              exporter.exportReport();
              byte[] bdata = ((ByteArrayOutputStream) baos).toByteArray();
    Can any one help pls
    Message was edited by:
    ameet.au

    hey sorry for posting it in this forum.
    but do u have sample code for making it work.. since i am able to do it on PDF format(image from Database and another stored in the webserver) using
    byte image[] =(byte[]) outData.get("image");
                        ByteArrayInputStream img = new ByteArrayInputStream(image);
                        hmimg.put("P_PARAMV3", img);
    print = JasperFillManager.fillReport(reportFileName, hmimg, jrxmlds);
    bdata= JasperExportManager.exportReportToPdf(print);

Maybe you are looking for