Impdp error number of bytes exceeds limit of varchar2

Hi,
I have a problem migration data from one database with western Europe character set to a new database with UTF-8 charter set. I know that this has to do with some characters using more then one byte in UTF character database. But as I have one column varchar2 is configured with 4000 byte as limit and imp reports error as some rows exceeds 4000 and actual requirement is 4009 byte which is not possible as limit of varchar2 is 4000 byte.
I need to identify the rows that exceed 4000 byte.
Changing datatype is not an option.
Anyone have any ideas on how to identify the rows that exceeds 4000 bytes or anyone have a query that makes it possible to query existing environment with all rows above 3980 byte in this one column?
Regards
933746

JohnWatson wrote:
The csscan Character Set Scanner utility will report all the rows that will be damaged by the character set change (though you'll have to fix them yourself), it is described in the Globalization Support Guide.Thanks I'll look into it.
I haven't run csscan on this database but ofc on all others :)

Similar Messages

DRM Activation Error "Number of activations exceeded" (Android reader)

I received this error "Number of activations exceeded" when entering in my Adobe ID in my Android device. I have owned several Android phones and tablets and probably have activated on all of them over the years. How do I reset the activations? Thank you.

It is a vicious cycle. I spoke with two different people by phone (no chat is available that I could find, nor an email address0. The first person said they could not help after keeping me on the phone 20 minutes. I called again and after speaking to two people, my "case" was referred to the Diginal Editions department and someone will contact me within 24-48 hours. No contact so far 30 hrs later. This seems to be a frequent issue according to these forum comments, but Adobe does not seem very customer sensitive or efficient in resolving these fairly simple issues.

Message Content Exceeds Limit

I've had an error message: Message content exceeds limit while trying to send a 2mb video by mms. What am I doing wrong? I've sent them before and they've gone thru. HELP Please!
Solved!
Go to Solution.

Hi and Welcome to the Forums!
Since MMS is a voice-level service from your carrier, you should contact them for assistance.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hyp FR Error: 5200 : Error executing query. Exceed max row number 100000

Hi,
I am getting the error
5200 : Error executing query. Exceed max row number 100000
when I run the report on Financial Reporting. It gives the same error when run on Workspace.
Have you guys encountered this error before? What are the best ways to tackle it? Help is much appreciated guys.
-- Adi
Edit 1 - I tried to simplify the parameters but I still get the same error making me suspect that the issue is not the 100000 row issue.
Edited by: Aditya26 on Apr 11, 2012 9:02 AM

Hi Adi,
This is from My Oracle Support:
How to Increase Row Limit to Avoid Error "Exceed Max Row Number 100000" [ID 866832.1]
Modified 23-FEB-2012 Type HOWTO Status PUBLISHED
In this Document
Goal
Solution
Applies to:
Hyperion BI+ - Version: 9.3.1.0.00 to 11.1.1.3.00 - Release: 9.3 to 11.1
Information in this document applies to any platform.
Goal
How do you increase the maximum row limit to avoid the error "5200: Error executing query: Exceed max row number 100000"?
Solution
1.Edit \Hyperion\common\ADM\<version>\lib\ADM.properties as follows:
From MAX_ROW_NUMBERS=100000 to MAX_ROW_NUMBERS=500000
If you are running extremely large reports, you can increase the limit.
2.Restart Reporting and Analysis services.
For version 11.1.2.x
The path of ADM.properties file in these versions should be located under:
%Oracle_Home%\Middleware\EPMSystem11R1\commo\ADM\11.1.2.0\lib
Cheers,
Mehmet

SE30 - Unable to end the measurement (error number 5, Time limit reached)

Hello there,
I wish to perform a complete ABAP trace using SE30 for a program running for 4 hours. The system is R/3 4.6C.
However I got the error message below once I clicked "Back" button or F3 when the program finished after 4 hours.
Please note that ST12 is not available in the system I logged on.
=============================================================
Error message:
"Unable to end the measurement (error number 5, Time limit reached)
Message no. S7 068"
Meas. type           Fully aggregated
Session type         In current session
Status               Time limit reached
Error message text   Time limit exceeded. LIMIT: 1800000000, ELAPSED TIME: 1800957266
File user            XXX
User                 XXX
File ID              ATRAFILE
Release              46C
Version              6
Operating system     HP-UX
Number of processors ???
=============================================================
The ABAP trace results only managed to capture the first 45 minutes of the ABAP calls (due to timeout i think). I would need the whole and complete ABAP trace result for 4 hours, NOT the first 45 minutes. Is there any setting in SE30 can be set for this purpose? Note that there is no ABAP error for the program I traced.
The following link didn't answer my question as well. Hope you can provide clue in this case.
http://help.sap.com/saphelp_nw70/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
Runtime analysis, SE30, ERROR
Thanks,
KP

Hi Kim,
The Limit is expliced on the Doc.
http://help.sap.com/saphelp_nw70/helpdata/en/4d/4e2f37d7e21274e10000009b38f839/frameset.htm
It's 4293 Actually and you set it on SE30 by change the Measurement Restrictions, tab Duration/Type.
regards.

Limit on number of statements exceeded

Hi Experts,
He have done SAP Data archiving in a test server. The current ASP used is 88%. After delete job in DB12 it is showing 148 GB space. Now I want to reorganized the Table (COEP). But it is showing an error Limit on number of statements exceeded after sometime. How to resolve it?
Asad

Hi Asad,
how large is COEP ?
How many rows do your have in COEP ?
How many rows are deleted in COEP ?
How large is your ASP
The ASP usage is 88%, isn't it ?
You should keep in mind, that COEP gets copied with the new size temporary twice ...
Therefore, it might become an issue ...
I do hope, that you do have more tables with deleted rows .... then you might want to start the smaller ones first in order to get more free ...
I suggest, that you install the CONTOOL with investigation for this in order to get a good overview on youur DASD usage ... you can download it for free at:
consolut - Monitoring and administration on iSeries
Regards,
Volker Gueldenpfennig, consolut international ag

ORA-Error: Maximum number of Processes exceeds

Hi,
Today we got one Oracle error: Maximum number of Processes exceeds while connects to our Oracle Database.
We have application running on our DB, which have 50 threads running and making connection to Oracle Schema.
In our init.ora file the Processes Parameter is set to 50.
But we also have another init<Schema Name>.ora file which has Processes Parameter as 50.
When I search on this error, I got that it is due to no. of user processes on Oracle instance.
What are these user processes exactly?
If we set the Processes Parameter as 150, and we have RAC environment with 3 Cluster, does it means we have 150*3 processes can run at a time.
The other doubt I have is that: Is this parameter is instance based, SID based or cluster based?
Please provide some input on this.
Thanks in Advance.
Manoj Macwan

If you don't issue
alter system set processes=150 scope=both sid='<your instance 1>'
all instances will be allowed to fork 150 processes.
The other poster is incorrect.
Sybrand Bakker
Senior Oracle DBA

Total rowsize for table exceeds the maximum number of bytes per row (8060).

I am trying to Creat a UserDefined Field in Marketig document OPOR Table through the script. then the warning "Total rowsize for table exceeds the maximum number of bytes per row (8060). " is occuring ,and transcation rollback. how can i solve the problem.

You have three ways to deal with this:
1) make you user field smaller.
2) check all other UDF in that table, and if you find one that your not using, delte it.
3) Somebody told me that SQL Server 2005 will not have this problem. Maybe you can migrate.
Best regards
Harold Gómez V.

Number of processes exceeds maximum limit

Normally how many process we need to put in init.ora.
My database currently has processes=100 so Obviously sessions=(100 X 1.1)+5=115.
Some times we use to get Number of processes exceeds more than 100.
What does it mean. What is the preferable value for processes.
I have a thought to put Processes=300.
Regards,
Ganesh.

Dear Ganesh,
When you are getting the "Processes exceeded" error, your Oracle server is letting you know that the number of operating system processes has exceeded 100.
Go ahead and set:
processes = 250
in your INIT.ORA file. You have to then shutdown and restart the database for the changes to take effect.
Ciao.
null

How can I monitor number of bytes downloaded so I don't go over my plan limit?

I have a limited number of bytes I can download per day. How can I monitor this on a daily usuage?

I think that is exactly what i need. I have downloaded and restarted firefox. I entered the user name and password I use to sign on to the internet and get a red x next to the icon and it is not working. any suggestions?

Max. number of expressions exceeded

I have a simple SQL to select data from a single table with a
list of 1000 elements i.e. SELECT A FROM TABLE_A WHERE B IN (1,
2, 3, ..., 1000). It worked fine. If I added one more i.e.
WHERE B IN (1, 2, 3, ...., 1000, 1001), then I got error 1795 -
Max number of expressions exceeded 254. I thought this error
applies to the number of expressions. What I have was a list of
values in a single expression -> B IN (1, 2, ...).
I think the error message is misleading. If there is a limit of
1000 elements in the IN expression, the error message should say
so unlesss Oracle somehow formats the 1000 elements into 254
expressions behind the scene.
Any comments.
Thanks.
null

What versions are you using?
Do you have a License?
thanks
mike

ORA-19566: exceeded limit of 0 corrupt blocks

Hi All,
We have been encountering some issues with RMAN backup; it has been erroring out with same errors (max corrupt blocks). As of now, I ran the db verify for affected files and found that indexes are failing. When I tried to find out the indexes from extent views, I was unable to find it. Looks like these blocks are in free space as I found it and also the V$backup corruption view shows the logical corruption.
Waiting for you suggestion....
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for HPUX: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
RMAN LOG:
channel a3: starting piece 1 at 14-DEC-09
RMAN-03009: failure of backup command on a2 channel at 12/14/2009 05:43:42
ORA-19566: exceeded limit of 0 corrupt blocks for file /ub834/oradata/TERP/applsysd142.dbf
continuing other job steps, job failed will not be re-run
channel a2: starting incremental level 0 datafile backupset
channel a2: specifying datafile(s) in backupset
including current control file in backupset
channel a2: starting piece 1 at 14-DEC-09
channel a1: finished piece 1 at 14-DEC-09
piece handle=TERP_1769708180_level0_292_1_1_20091213065437.rmn tag=TAG20091213T065459 comment=API Version 2.0,MMS Version 5.0.0.0
channel a1: backup set complete, elapsed time: 01:14:45
channel a2: finished piece 1 at 14-DEC-09
piece handle=TERP_1769708180_level0_296_1_1_20091213065437.rmn tag=TAG20091213T065459 comment=API Version 2.0,MMS Version 5.0.0.0
channel a2: backup set complete, elapsed time: 00:24:54
RMAN-03009: failure of backup command on a4 channel at 12/14/2009 06:14:33
ORA-19566: exceeded limit of 0 corrupt blocks for file /ub834/oradata/TERP/applsysd143.dbf
continuing other job steps, job failed will not be re-run
released channel: a1
released channel: a2
released channel: a3
released channel: a4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on a3 channel at 12/14/2009 06:41:00
ORA-19566: exceeded limit of 0 corrupt blocks for file /ub806/oradata/TERP/icxd01.dbf
Recovery Manager complete.
Thanks,
Vimlendu
Edited by: Vimlendu on Dec 20, 2009 10:27 AM

dbv file=/ora/oradata/binadb/RAT_TRANS_IDX01.dbf blocksize=8192
The result:
DBVERIFY: Release 10.2.0.3.0 - Production on Thu Nov 20 11:14:01 2003
(c) Copyright 2000 Oracle Corporation. All rights reserved.
DBVERIFY - Verification starting : FILE =
/ora/oradata/binadb/RAT_TRANS_IDX01.dbf
Block Checking: DBA = 75520968, Block Type = KTB-managed data block
**** row 80: key out of order
---- end index block validation
Page 23496 failed with check code 6401
DBVERIFY - Verification complete
Total Pages Examined : 34560
Total Pages Processed (Data) : 1
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 31084
Total Pages Failing (Index): 1
Total Pages Processed (Other): 191
Total Pages Empty : 3284
Total Pages Marked Corrupt : 0
Total Pages Influx : 0
Seems like I have 1 page failing. I try to run this script:
select segment_type, segment_name, owner
from sys.dba_extents
where file_id = 18 and 23496 between block_id
and block_id + blocks - 1;
No rows returned.
Then, I try to run this script:
Select tablespace_name, file_id, block_id, bytes
from dba_free_space
where file_id = 18
and 23496 between block_id and block_id + blocks - 1
Resulting 1 row.
Seems like I have the possible corrupt block on unused space.
Edited by: Vimlendu on Dec 20, 2009 2:30 PM
Edited by: Vimlendu on Dec 20, 2009 2:41 PM

Install HRCS9.0 and PT8.53 with Linux Issue: the files intiPT853.ora and initHRCS90.ora: maximum number of DB_FILES exceeded

Folks,
Hello. I have installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The entire PeopleTools runs correctly in browser at the beginning.
After I set up HCM and Campus Solution 9.0 Database Instance named HRCS90 in Linux successfully, PeopleTools 8.53 Database Instance PT853 cannot be mounted. Its error message is below:
SQL> startup
ORACLE instance started.
Total System Global Area 538677248 bytes
Fixed Size                  2146024 bytes
Variable Size             528482584 bytes
Database Buffers            4194304 bytes
Redo Buffers                3854336 bytes
ORA-00059: maximum number of DB_FILES exceeded
In the file /home/user/OracleDB_Home/dbs/initPT853.ora, its parameter db_files has 3 values: small 400, medium 1021 and large 1500. The initial value is 1021 and it works correctly at the beginning. But after set up another instance HRCS90, the above error message comes up and instance PT853 cannot mounted. I change the value of db_files from 1021 to 1500 in the file initPT853.ora and restart OS Linux. But get the same error as below:
SQL> startup
ORACLE instance started.
Total System Global Area 538677248 bytes
Fixed Size                  2146024 bytes
Variable Size             528482584 bytes
Database Buffers            4194304 bytes
Redo Buffers                3854336 bytes
ORA-00059: maximum number of DB_FILES exceeded
In the file /home/user/OracleDB_Home/dbs/initHRCS90.ora, its parameter db_files has 3 values: small 80, medium 400 and large 1500. I use db_files=400 and it works correctly. I start up instance HRCS90 right after the above error message as below:
SQL> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[user@userlinux bin]$ export ORACLE_SID=HRCS90
[user@userlinux bin]$ ./sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Sat Nov 23 12:40:02 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 538677248 bytes
Fixed Size                  2146024 bytes
Variable Size             528482584 bytes
Database Buffers            4194304 bytes
Redo Buffers                3854336 bytes
Database mounted.
Database opened.
SQL> select * from psdbowner;
DBNAME   OWNERID
HRCS90     MYNAME
SQL>
As we see above, the instance HRCS90 works corretly and PT853 cannot start up. The parameter DB_FILES of the file initPT853.ora has an issue.
My question is:
Because 1021 and 1500 are not enough to startup instance PT853, what value should be used for DB_FILES of the file initPT853.ora ?
Thanks.

user8860348 wrote:
Folks,
Hello. I have installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The entire PeopleTools runs correctly in browser at the beginning.
After I set up HCM and Campus Solution 9.0 Database Instance named HRCS90 in Linux successfully, PeopleTools 8.53 Database Instance PT853 cannot be mounted....
I'm sorry, but I don't understand what does "Instance" mean here.
>In the file /home/user/OracleDB_Home/dbs/initPT853.ora, its parameter db_files has 3 values: small 400, medium 1021 and large 1500.
Are you not using a spfile ? Does the file contain really the 3 values ? What is the last ? Have you checked the value in the database side "show parameter db_files" ?
>But after set up another instance HRCS90, the above error message comes up and instance PT853 cannot mounted
Again, I have no idea what it means.
>In the file /home/user/OracleDB_Home/dbs/initHRCS90.ora, its parameter db_files has 3 values: small 80, medium 400 and large 1500. I use db_files=400 and it works correctly.
Again, 3 values ? What is the last ? Have you checked the value in the database side "show parameter db_files" ?
>As we see above, the instance HRCS90 works corretly and PT853 cannot start up. The parameter DB_FILES of the file initPT853.ora has an issue.
Again, I don't understand what are HRCS90 and PT853 exactly. Cannot help.
>Because 1021 and 1500 are not enough to startup instance PT853, what value should be used for DB_FILES of the file initPT853.ora ?
I'm sure, you don't have an issue with this parameter, 1500 files in the database is quite huge number. I built a demo recently, the default value 1021 was ok for me. You should have done something wrong somewhere.
Nicolas.

Cloning problem: ORA-00059: maximum number of DB_FILES exceeded

Hi everyone!
I'm trying to clone our data warehouse over an existing test instance, DMART01. Here's what I did:
1. on the data warehouse - alter database backup controlfile to trace;
2. edited the trace file to change the db name and path of the datafiles
3. logon to sqlplus in DMART01 and run my altered trace file.
4. Below is the error I'm getting:
SQL> @clone09142009.sql
ORACLE instance started.
Total System Global Area 1358954496 bytes
Fixed Size 2128280 bytes
Variable Size 1203668584 bytes
Database Buffers 150994944 bytes
Redo Buffers 2162688 bytes
CREATE CONTROLFILE REUSE SET DATABASE "DMART01" RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-00059: maximum number of DB_FILES exceeded
ORA-01110: data file 211:
'/data/oracle/dmart01/d05/oracle/dmart01data/DW_PROD_MEDIUM11.dbf'
In my trace file it has
CREATE CONTROLFILE REUSE SET DATABASE "DMART01" RESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 2
MAXDATAFILES 500
MAXINSTANCES 1
MAXLOGHISTORY 1816
Additional information - the data warehouse has an entire tablespace with many datafiles that I don't want in DMART01. I edited those datafile lines out of my trace file. Could some remnants of that be causing my problems? The DB_FILES parameter in the warehouse is set to 500. In DMART01 it's only 200. In the clone, I only want to bring over 61 datafiles. Besides, I thought that in the create controlfile statement would set the parameter, in this case to 500.
I'm stumped. Any suggestions?
Thanks!
Sharon

I answered my own question. If anyone is curious, here's what I did:
in DMART01
1. startup nomount;
2. create pfile from spfile;
3. shutdown immediate;
4. edited pfile to have dw_files=500
5. startup nomount pfile=initDMART01.ora;
6. create spfile from pfile;
7. shutdown immediate;
8. @clone09142009.sql

FullOffline Backup - ORA-19566: exceeded limit of 0 corrupt blocks for file

Dear SAP gurus,
I am getting an error from the DBA Planning Calendar every time the job for "Full Offline backup" is run. And it is always as you can see from the log on the same file "oracle/SHD/sapdata4/sr3_16/sr3.data16".
The oracle error is the following:
ORA-19566: exceeded limit of 0 corrupt blocks for file /oracle/SHD/sapdata4/sr3_16/sr3.data16
I found the SAP Note 969192 - RMAN Backup of SYSTEM tablespace terminates with ORA-19566
but it does no apply because this is for the tablespace SYSTEM and not PSAPSR3.
Please find below the log:
BR0051I BRBACKUP 7.00 (46)
BR0055I Start of database backup: begomwsv.ffd 2011-08-17 10.01.37
BR0484I BRBACKUP log file: /oracle/SHD/sapbackup/begomwsv.ffd
BR0477I Oracle pfile /oracle/SHD/102_64/dbs/initSHD.ora created from spfile /oracle/SHD/102_64/dbs/spfileSHD.ora
BR0101I Parameters
Name                           Value
oracle_sid                     SHD
oracle_home                    /oracle/SHD/102_64
oracle_profile                 /oracle/SHD/102_64/dbs/initSHD.ora
sapdata_home                   /oracle/SHD
sap_profile                    /oracle/SHD/102_64/dbs/initSHD.sap
backup_mode                    FULL
backup_type                    offline_force
backup_dev_type                disk
backup_root_dir                /mnt/backup/oracle/SHD
compress                       no
disk_copy_cmd                  rman
cpio_disk_flags                -pdcu
exec_parallel                  0
rman_compress                  no
system_info                    shdadm/orashd eccdev01 Linux 2.6.16.60-0.87.1-smp #1 SMP Wed May 11 11:48:12 UTC 2011 x86_64
oracle_info                    SHD 10.2.0.4.0 8192 17654 1114483454 eccdev01 UTF8 UTF8
sap_info                       700 SAPSR3 0002LK0003SHD0011Y01548735220015Maintenance_ORA
make_info                      linuxx86_64 OCI_102 Jan 29 2010
command_line                   brbackup -u / -jid FLLOF20110817100136 -c force -t offline_force -m full -p initSHD.sap
BR0116I ARCHIVE LOG LIST before backup for database instance SHD
Parameter                      Value
Database log mode              No Archive Mode
Automatic archival             Disabled
Archive destination            /oracle/SHD/oraarch/SHDarch
Archive format                 %t_%s_%r.dbf
Oldest online log sequence     17651
Next log sequence to archive   17654
Current log sequence           17654            SCN: 1114483454
Database block size            8192             Thread: 1
Current system change number   1114501246       ResetId: 664011854
BR0118I Tablespaces and data files
BR0202I Saving /oracle/SHD/sapdata3/sr3_15/sr3.data15
BR0203I to /mnt/backup/oracle/SHD/begomwsv/sr3.data15 ...
#FILE..... /oracle/SHD/sapdata3/sr3_15/sr3.data15
#SAVED.... /mnt/backup/oracle/SHD/begomwsv/sr3.data15 #1/15
BR0280I BRBACKUP time stamp: 2011-08-17 10.28.42
BR0063I 15 of 48 files processed - 44100.117 of 121180.346 MB done
BR0204I Percentage done: 36.39%, estimated end time: 11:15
BR0001I ******************________________________________
BR0202I Saving /oracle/SHD/sapdata4/sr3_16/sr3.data16
BR0203I to /mnt/backup/oracle/SHD/begomwsv/sr3.data16 ...
BR0278E Command output of 'SHELL=/bin/sh /oracle/SHD/102_64/bin/rman nocatalog':
Recovery Manager: Release 10.2.0.4.0 - Production on Wed Aug 17 10:28:42 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: SHD (DBID=1683093070, not open)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6>
allocated channel: dsk
channel dsk: sid=223 devtype=DISK
executing command: SET NOCFAU
Starting backup at 17-AUG-11
channel dsk: starting datafile copy
input datafile fno=00019 name=/oracle/SHD/sapdata4/sr3_16/sr3.data16
released channel: dsk
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on dsk channel at 08/17/2011 10:30:30
ORA-19566: exceeded limit of 0 corrupt blocks for file /oracle/SHD/sapdata4/sr3_16/sr3.data16
RMAN>
Recovery Manager complete.
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.30
BR0279E Return code from 'SHELL=/bin/sh /oracle/SHD/102_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance SHD failed
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.30
BR0506E Full database backup (level 0) using RMAN failed
BR0222E Copying /oracle/SHD/sapdata4/sr3_16/sr3.data16 to/from /mnt/backup/oracle/SHD/begomwsv failed due to previous errors
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.34
BR0307I Shutting down database instance SHD ...
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.34
BR0308I Shutdown of database instance SHD successful
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.34
BR0304I Starting and opening database instance SHD ...
BR0280I BRBACKUP time stamp: 2011-08-17 10.30.47
BR0305I Start and open of database instance SHD successful
Do you guys have any idea on how to solve this issue??
Thanks in advance, Marc

Hi,
I am getting an error from the DBA Planning Calendar every time the job ...
So when was your last successfull backup of this datafile. Check if still available.
If this is some time ago, and may be you are currently without any backup, try to backup without rman at once,
to have at least something to work with in case you get additional errors right now.
Then you need to find out what object is affected. You are on the right way already. You need the statement,
that goes to dba_extents to check what object the block belongs to.
Has the DB been recovered recently, so the block might possibly belong to an index created with nologging ?
(this could be the case on BW systems).
If the last good backup of that file is still available and the redologs belonging to this backup up to current time are as well, you could try to recover that file. But I'd do this only after a good backup without rman and by not destroying the original file.
If the last good backup was an rman backup, you can do a verify restore of that datafile in advance, to check if the corruption is really not inside the file to be restored.
Check out the -w (verify) option of brrestore first, to understand how it works.
(I am not sure it this is already available in version 7.00, may be you need to switch to 7.10 or 7.20)
brrestore -c -m /oracle/SHD/sapdata4/sr3_16/sr3.data16 -b xxxxxxxx.ffr -w only_rmv
You should do a dbv check of that file as well, to check if it gets more information. I.E if more blocks are
affected. rman stops right after the first corruption, but usually you have a couple of those in line, esp. if these are
zeroed ones. (This one would also work with version 7.00 brtools)
brbackup -c -u / -t online -m /oracle/SHD/sapdata4/sr3_16/sr3.data16 -w only_dbv
Good luck.
Volker

Impdp error number of bytes exceeds limit of varchar2

Similar Messages

Maybe you are looking for