Implementation flow PM (Catalog OCI) for a system ECC5

Hello all,
My goal is to customize this system for create purchase orders to flow PM and send this PO for a system E-procurement and not implemented a BAPI.
How are implemented this customizing for send this PO by IDOC from R/3 (PM)?
Also I would like create the PO from catalog.
It is sufficient to customize system only for solve this problem ?
Please explain me a functionnality for this process.

Hi Mady,
to be more precise :
sequence 10                 http://blabla......com/
Sequence 20                 reblabla.cgi.exe
Sequence 30   SEQNO         20
Kind regards,
Yann
PS : sequence 30 should be optional ...
Message was edited by: Yann Bouillut

Similar Messages

How to Hold/Block the messages in PI for particular system

Hi,
I want to know the way of holding/blocking the message in PI for particular system. For other system message flow should happpened normally. My Scenario is,
R3->PI->SRM. For connection between PI and SRM we are using proxy. We are going to upgrade our SRM system. During that time there should not be any message flow to SRM. All the message needs to be blocked in PI. Once the upgrade over, we will restart all the messages.
There are lot more system connected to PI. There should not be any interupt on that, message flow should happned normally for other system except SRM. Only the message going to SRM should be blocked.
I found one way, by locking the user which used in communication channel for SRM system. So all the message will be failed in PI with Authentication error. After upgrade we can restart the message.
Is there any other standard way to hold/block the messages which are going to particular system??
Regards
Baskaran K

Hi,
> I found one way, by locking the user which used in communication channel for SRM system. So all the message will be failed in PI with Authentication error. After upgrade we can restart the message.
By locking user or giving wrong password to RFC destination in PI or by giving wrong business system in Receiver determination we can stop the messages in PI. But those failes messages are available for only few days in SXMB_MONI based on the BASIS settings.
But I don't think this is the best way, we have other alternative is we can save those files in one folder, after upgrade by using some other scenario we can process the files.
Regards,
Venkata Ramesh

Interface Project System to Catalog OCI

I am trying to implement SciQuest within Project Systems SPRO > Project Systems > Material > Interface for Procurement Using Catalog (OCI) and I am difficulty navigating around SciQuest site. The actual punch out works but when I click on 'Add to Cart' an IE session opens. Has anyone experienced this type of behavior in other catalogs? Is there certain configuration that the vendor (e.g. SciQuest) has to adhere to since this is done directly in R/3. I am familiar with SAP SRM which is web based and this just works, however, when I do this in R/3 it is acting as if it was web based as is not.
Any help would be greatly appreciated.
Kind Regards,
Sabina McLaughlin

I haven't worked/implemented OCI but your post made me to search some resources on this.
Found few OSS (mentioned below) notes related to Catalog connection and hope this provides you with some leads.
1092900
1092923
Link in SAP Help.
http://help.sap.com/saphelp_crm20c/helpdata/en/0F/F2573901F0FE7CE10000000A114084/frameset.htm
Regards
Sreenivas

Interface for Procurement Using Catalogs (OCI)

Hello all,
I like to have a lot of explications for this cutomizing for a flow PM.I would like call a catalog if I create order PM never pass to EBP sytem.
If I finish this customizing Interface for Procurement Using Catalogs (OCI) in R/3 system who R/3 taking all informations for a catalog when a order PM has been created.
There is a button to use a catalog if a transaction IW31 or IW32 has been executed or not?
This version SAP is ECC5.
Thanks for your response.

Hi Mady,
here are high level steps for PM/OCI:
- SPRO: Maintenance and Service Orders -> Interface for Procurement Using Catalogs (OCI) --> Define Catalogs
- SPRO: Maintenance and Service Orders -> Interface for Procurement Using Catalogs (OCI) --> Assign Catalog to Order Type
As of SAP ECC 5.00, PLM Extension (EA_PLM 500), you can call up an external catalog in a maintenance order or service order, a maintenance task list or a network, and copy services from this catalog into the order or task list or network.
You also now have the option of storing multiple catalogs for each of the following criteria:
- Order type and planning plant
- Task list category and plant
- Network type and plant
If all this customizing is OK, a little "Catalog" button will appear in maintenance or service order transaction.
Rgds
Christophe

Implementation of Posix Thread class in c++ for solaris system

Hello Everyone,
Please help me with information regarding how to implement Posix Thread Class in c++ for Solaris 5.8 system.
if available Please let me know any Open Source Posix Threads C++ built-in library available for Solaris System.
Thanks in Advance.
Thanks & Regards,
Vasu

Posix threads are available on Solaris, and can be used directly in C or C++ programs. Include the header <pthread.h> to get access to the types, constants, and functions. Compile with the option
-mt
on every command line, and link with the options
-mt -lpthread
If you want to create a class to provide a different sort of interface to phreads you can do so by building on the <pthread.h> functionality.

Call a external vendor catalog - OCI

Hi,
I want to call a external vendor catalog (OCI) from webdynpro-ABAP application. Can some one help me on how to achieve this ?
I am not using SRM. I need to pass the value to ERP system.
We can call the Catalog into Web Dynpro Screen Using CHIP with passing parameters like URL name, But we cannot get the selected materials from the catalog.
Can some one help me on how to achieve this ?
Thank & Regards,
Akash Rana

>
Akash Rana wrote:
> Hi Thomas,
>
> For a very quick and effective response, as u r aware of this issue, could u also please let me know What are other ways i can fulfill this requirement.
>
> Thanks
>
> Akash
I've already listed my suggestions. I'm not sure what exactly you are looking for with this follow up question.

GRC 10.0 SP14 - Poblems when generating rules for logical systems

Hello Experts!
We recently updated a DEV system to SP14 and we're having issues regarding the rule set generation. I'd like to know if you have faced a similar problem after installing SP14. The details are described below:
Create a test function ZTEST_F1
The action PFCG is associated to a Physical System (Test Connector SP14) and to a Logical System (Sistema Logico Retail)
The logical system contains D05 among other connectors:
And it’s defined as a logical group:
The connector “test connector Sp14” points to the same system as D05.
Now I create another function, let’s say ZTEST_F2
Now let’s define a SoD Risk ZTSTSP14
Generate rules and after that we check GRACSYSRULE table for such risk and we get:
Let’s add more transactions:
Generate rules:
Now in the table we get:
The logical system has been added to the GRACSYSRULE table for the new combination and also the physical system TST_D05, but there's no combinations for the system D05 for example.
Now if we run SoD analysis:
We have four combinations for the physical system TST_D05 but only two for D05 that belongs to the logical system:
Do you have any clue? have you faced a similar problem?
Thanks in advance.
Cheers,
Diego.

Hello Collen!
First of all I want to thank you because after aplying the note the rules generated fine and now the Risk Analysis is OK for the example described above:
I've also tested with a huge number of risks and made a comparison between the results of the Physical conector and the Connector that belongs to a logical group and I got the same results as action level as well as Permission Level as expected.
Regarding the note itself, we usually check for notes and we have implemented many notes in advance related to rule generation issues.
The point is that, as my point of view is just not acceptable to get a new SP with this kind of issue. Rule generation is a core functionality and SAP must test such functionalities before releasing a SP and these checks cannot rely on the customer. For me, rule generation issues in GRC are just unnaceptable. I can accept issues with other modules or new functionalities, but with role generation they must guarantee that it works properly and perform the requiered tests before releasing an SP.
Well... bottom line the issue has been resolved and I really appreciate the help you provided!!!!
Many Thanks!!!
Diego.

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Initialisation option for source system in schedular tab

What initialisation option for system in schedular tab signifies? Does it acts as pointer and points to the last record loaded in cube or ods?

Hi....
Welcome to SDN..........
Initialisation option for source system in schedular tab........
shows to you all the init you made for a specific datasource/sourcesystem...if you find a row here, it means that the init channel is active and you can load delta for that specific flow.....
Initialization may with data transfer or without Data Transfer.......If you do with data transfer it will set the init flag............as well as it will fetch the data from set up table...........if you do without data transfer it will only set the init flag.....it will not fetch any records.........As soon as this init flag get set.......delta queue will get generated in the source system........after that any changes or new records will go to the delta queue.............So initialization load will be followed by delta load......
When you have to reinit, first of all you have to delete this row and then request a new initial load, otherwise the system cannot allow to perform a new init (with overlapping condition) if you don't deete the previous one....
Hope this helps
Regards,
Debjani.......

JAVA for embedded systems: just a myth ?

Hi,
I'm relatively new to JAVA (a year or so), and so far I'm fascinated. I've only developed for PC using J2SE, although I'heard a lot of hipe about J2ME, which I guess is the JAVA for embedded systems (correct me if I'm wrong here).
I worked a lot with microcontrollers, and I think it would be really nice to program them using JAVA. I googled serched for JAVA enabled embedded systems, but I couldn't find anything.
Anyway, this morning I got to this site and find a very interesting article, which I'd like to share with you and hear your opinions about the 5th myth.
The link is: http://www.chipcenter.com/knowledge_centers/embedded/todays_feature/showArticle.jhtml?articleID=10300909
Cheers!!

>... very interesting article, which I'd like to share with
you and hear your opinions about the 5th myth.
Very interesting. I'd always wondered what happened to the Java chips...
Here's a thought, and an associated question, if any of you reading this happen to be up on modern processor architecture...
What about microcode? Back in school (decades ago) I learned a bit about microcode, which was like very simple, low-level instructions that a processor would "execute" to execute each assembly/machine language instruction. The idea was that if you needed to tweak the instruction set of a processor, you could rewrite its microcode. Seems like this would lend itself nicely to implementing a JVM in "hardware"... The question is, do they even use microcode anymore? With the pursuit of speed and optimization, I wonder if they didn't abandon it and go with highly specialized/optimized circuits instead...
Back to the original question -- it would be somewhat ironic if Java weren't available for embedding systems. The original target system was set-top boxes, etc. I've tried a few JVMs on my Palm -- they're getting there!

BI Admin Cockpit - only for myself system(BI)...?

Dear Gurus,
We are implementing BI admin cockpit in our BI system.
        u2022 When we are installing BI content two datasources, transformations, Info Packages has been installed for every cube -one for myself system(BI) and another one is for ECC source system.
u2022     As per the SAP Note 934848 it clearly tells it is for only myself system, then why SAP provides standard datasources for ECC system.
Please let us know whether we have to load data for only myself system OR for both the system I have to load data?
Regards,
Kiran A
Edited by: Kiran A on May 19, 2010 10:13 AM

Dear Mrityunjay,
We are unable to find the job in SM37 in ECC system.
Please let us know whether we have to load data from ECC for the bellow mentioned infocubes are not?
0TCT_C23     InfoPackage Statistics
0TCT_C22     DTP Statistics
0TCT_C21     Process Statistics
0TCT_C03     Data Manager Statistics (Details)
0TCT_C02     Front-End and OLAP Statistics (Details)
0TCT_C01     Front-End and OLAP Statistics (Aggregated)
Thanks for your support and co-operation.
Regards,
Kiran A

Project Management Question - timelines for Production system deployment

Hi
I need an expert advice on setting up timelines for establishing an Oracle Apps Production environment. We are implementing Oracle HR & Payroll at an organization.
Our system architecture is a 2-node application tier and 2-node DB tier (RAC). RAC is configured by another party and we only have to prepare the application tier (2 nodes)
We would be installing Oracle Apps R11i (11.5.10) with jserv load balancing on the 2-nodes
Can anyone suggest how much time this should take to install/configure & patching of the application tier (on 2 nodes)?
Regards
Saira

Duplicate post (check your other thread):
Project Management Question - timelines for Production system deployment
Re: Project Management Question - timelines for Production system deployment

CHARM activation check failing on "consolidation system for development system SSA-200 in project ZTEST2

Hello,
We are implementing Charmlite and want to activate in project landscape.
We are Solution Manager 7.1 SP11 and testing this scenario in sandbox.
Steps completed:
1. in sandbox domain controller, created two virtual systems and made 3 system landscape, where, I can release the transport and see it in QA system (Virtual system buffer)
2. The LMDB has been updated with Virtual system and in SMSY, the entries of virtual system shows up. The logical components have the client information.
Issue:
in /nsolar_project_admin ->System landscape -> change management, When consistency check is performed, we get error message saying
Virtual RFC is miising (I am guessing, it should be okay)
The logical component is incosistent (This might be the reason the CHARM is not getting activated.
"No consolidation system for development system SSA-200 in project ZTEST2
No track for project ZTEST2 with log. system SSA/200"
For me, when i look in satellite system, the consolidation system is a virtual system and it should be fine.
Please advise
Regards,
Durga PK Saitana

Thank you Karthik. Still the problem persists
I went through the blog earlier. I created l ABAP instance manually in SLD and moved into LMDB and can see the entry in SMSY. (I did not see any option of putting virtual flag)
We were trying harmonization of RFC from note 1384598 and since we had virtual systems, went with domain links.
After domain links, the virtual systems are read. the Dev ABAP system is not able to find the consolidated system. In the satellite system, I can release transport and move the transport.
Not sure, why this issue is persistent.

Implementing Single Sign-On support for the Oracle E-Business suite

Implement Single Sign-On support for the Oracle E-Business suite
I want implement Single Sign-On support for the Oracle E-Business suite.
Operationg System : linux/Solaris
Oracle E-Business suite : 11.5.10
Oracle Application Server : 10gAS(latest availble)
Type of integration : SSO and OID with 11i
No third party SSO or LDAP
Qusetions
1.If my SSO Server is down can i login to applications(11i) using normal mode(default login http://servername.xxxx.com:8000/).
2. Is it possible to have appilications (11i) in Linux/Solaris and 10gAS in windows.
Please answer...
NOTE:
I am following Oracle METALINK Doc.Id 233436.1 and 261914.1.
Thank you.
MARK

You couldn't login into server But You can use the following login
http://servername.xxxx.com:8000/AppsLocalLogin.jsp
For this you need to enable the Appslocallogin Profile option

No User Mapping Defined for the system

Hi,
I am trying to create the transcation iView ,here in this i want to run the BW transcation..
For this i have created the transaction iView with the transaction code in that iview properties i have given the system alias which i have created for the BW system..
The system which i have created for this is SAP R/3 dedicated...
when i try to see the preview for this transaction iview it is giving the Error"No user Mapping defined in the system...
i have done the user mapping also...
Plz can any one help me in this..
useful solution will be rewarded...
Thanks
Shashank
Message was edited by: shashank moharana

Hi Shashank
the follwoing is total soln for connect EP AND BW and for ITS as well as SSO
Creating BW system in Portal
From the portal top-level navigation, choose System Administration -> System Configuration -> System Landscape
Navigate to Portal Content -> Your SAP Ssytem Folder i.e SAP BW
Right-click on the SAP BW folder, then choose New -> System
Select SAP system using dedicated application server
from System Template
Make the following entries for the BW system you want to connect to the Enterprise Portal
System Name -
SAP_BW
System ID -
Any ting u want like SAP_BW or SID of BW
System ID Prefix -
com.mycompany
Master Language -
English
Description -
NEXT -> Summary, review the options you selected for the new page.To make changes, choose Back to return to the appropriate screen. Then choose Next till you reach the Summary page, review, and choose Finish
Choose Open the object for editing and choose OK
The Property Editor iView will open
Select Connector in the Property Category dropdown
Enter the fields below according to your SAP system
Application Host -
IP Address of BW system or Host name ( FQDN required for SSO )
SAP Client --- BW system client
SAP System ID -
SID of BW
Server Port -
3200 default for system number 00
SAP System Number -
00 or ur instance number
System Type -
SAP_BW
NOW,
Select User Management from the Property Category dropdown list
Enter the fields below
Logon Method -
 UIDPW
User Mapping Type --- Admin,user
Note -: IF u want to use SSO for BW system first selct above and test it with BW system if it's ok than change to following
Logon Method -
 SAPLOGONTICKET
User Mapping Type --- Admin,user
choose SAVE.
Select System Aliases in the Edit dropdown list. This opens the System Alias Editor
In Alias, enter SAP_BW. Choose the Add button
Choose Save to save your changes and close the page
Connect With ITS
For BW
In Property Catalog, use the dropdown to select ITS.
Set your SAP system properties according to Following
ITS Description -
Description
ITS Host Name -
Host name : Port for BW system
If u want to use SSO use FQDN instead of host name
ITS Path -
/scripts/wgate
ITS Protocol -
http
Save your settings.
u can check its for BW by following
Find a port for BW using IIS manager
Administrator tools -> Internet Service Manager - >
extend the HOST
Find the site created for BW system same like SID of BW system -> right click -> Properties
TCP Port -- this is used for ur BW system
in IE http://host_for_its:Port_for_bw/scripts/wgate/webgui/!
WAS for BW System
Select Web Application Server (WAS) in the Property Category dropdown list
WAS Description -
BW WAS
WAS Host Name -
Host name : Port for BW system
use FQDN for SSO
WAS Path -
/SAP/BW/Bex
WAS Protocol -
http
Save ur entry.
User Management For BW and EP
Befor u start if u don't use SAP Secu lib during installation
change the following
system Administration -> System configuration -> Um configuration -> Direct editing
find out follwoing
ume.usermapping.unsecure=False
change to
ume.usermapping.unsecure=TRUE
Save and restart portal server
ther are so many option available for DATA source u have required doc for using that
if u have any query for that msg me back
Mapping Users in the Portal
if u want to use UIDPW than user must be map to BW system
go by following
User Administration -> User Mapping
select the user u want to map by serch or entering a name
Choose the Alias for your backend system, for example SAP_BW
Enter the user id and password for BW user
save ur changes.
SSO configuration
make sure ur Portal ITS and BW WAS system belong to Same
domain.
i.e
portal.mycompany.com
its.mycompany.com
bw.mycompany.com
if not, u can do by creating a alias into host file for corresponding system
for SSO follwoing parameter must be set in profile parameter using RZ10 in BW system
login/accept_sso2_ticket -
1
login/create_sso2_ticket -
1
login/ticket_expiration_time --- desired value default 60
now download the portal certificate form follwoing
System administration -> System configuration -> Keystore
Administration
donload verify.der file save it it's like verify.der.zip
extract it than u can get verify.der
now in BW system using trans. STRUSTSSO2
in the certificate section choose import certificate
choose the file tab enter the path of the portal's verify.der file
set the file format to DER coded
in the trust manager choose ADD to PSE and Choose
ADD to ACL
in the dialog box enter the portal system's id (SID) and client
by default portla system ID is the common name (CN) and client is 000
save ur entry and restart the BW server
this are the basci configuration if u have any query related to it msg me back
regards,
kaushal

Implementation flow PM (Catalog OCI) for a system ECC5

Similar Messages

Maybe you are looking for