Implementation of Wizard for CS01

Hi experts,
I have a very difficult question so I hope u understand what I plan to do:
I want to create a wizard for transaction CS01 but I couldn't find any Interfaces/connection points for sending/getting data to CS01 for processing. Now, as a workflow it should be look like this:
First Wizardsscreen gets Input from the user -> Processing in CS01 -> Second Wizardsscreen delivers the outputfields(but only the field which are relevant).
Do u know any Interfaces at CS01, so I can send my Input Data to there?
Or do u know any examples where I can see how to create wizards for transaction like CS01 or POP1u2026
I only found these references(but their focus is about creating a wizard what I already knew):
- /people/dennis.vandenbroek/blog/2006/11/29/wizard-framework
- /people/puru.govind/blog/2007/02/08/wizards-in-abap-continued
- http://www.sapdesignguild.org/resources/wizard_html/wizard_styleguide.pdf
Thx for high-quality help!
Best regards,
Ayaz

Solved.
Use Ta SBPT_WB for creating ur wizard and use FM CSAP_MAT_BOM_READ for processing CS03.
Use FM like:
CALL FUNCTION 'CSAP_MAT_BOM_READ'
        EXPORTING
          material   = IPS_FERT_WIZARD-matnr
          plant      = IPS_FERT_WIZARD-werks
          bom_usage = IPS_FERT_WIZARD-stlan
          valid_from = IPS_FERT_WIZARD-datuv
*         IMPORTING
*          fl_warning = flg_warning
        TABLES
          t_stpo     = ept_stpo
          t_stko     = ept_stko
        EXCEPTIONS
          error      = 1.
      IF sy-subrc EQ 1.
      ENDIF.
Edited by: Tuncay Zaya on Aug 21, 2009 9:49 AM

Similar Messages

Anyone familiar with "The Standby Wizard for Oracle "

Is anyone familiar with "The Standby Wizard for Oracle " by Relational Database Consultants, Inc?
It is a GUI app that supposedly simplifies and automates the creation, maintenance, and switchback functions necessary to implement Oracle's standby database paradigm for high-availability.
I have a very small IT shop and simplification with data protection is important to me.
I'd like to read anyones thoughts if you have such.

Hi
I never used this tool. However it is important that you have the right infrastructure, too. A standby database wrong implemented is useless. You can try to call a consult in near you to implement the dataguard.
Does Relational Database Consultants has a documentation about the product?
Bye, Aron

Wizard for Microwave Office

Hello.
I am developing a wizard for Microwave Office, AWR Design Environment 10. The documentation that I've found is obsolete (VB_getting_started.pdf), because it refers to a non-existent windows registry key.
I have just developed the ActiveX class that implements the IMWOWizard interface, and it compiles and builds the DLL without problem. But I cannot make Microwave Office recognize the new Wizard into the Wizards list of the project.
I've tried:
- To use the option "Manage Wizards". In this option there is not any button to import the Wizard.
- To search the terms "Wizard", "Awr", "addin", etc... in Regedit. No clear match.
- To copy the .DLL into the Wizards folder, the main program folder, etc. No result.
- To search the Internet, forums, videos, manuals, documentation... Impossible.
Any hint would be appreciated.
Thanks in advance:
Jose Antonio Rodriguez.

Thank you for your response, but unfortunately it didn't work.
I've just created the key as you suggested and Microwave Office did not recognized the wizard.
The name of the key created under Addins is NameOfProject.NameOfClass
And I have also created the "Description" and "FriendlyName" values inside this key, as the "VB_getting_started" guide says.
Any other idea?
Thanks in advance.
Jose.

ENH: extend/implement and wizards

A couple of enhancement suggestions:
- Wouldn't it be great if, when creating a new class in the New Class wizard, all the abstract methods from the inherited class appeared in the new class skeleton as empty methods?
- Likewise, how about adding an 'implement interface' wizard - right click a class, choose 'implement interface', browse to the interface in a browse window (a bit like the browse for class to extend feature in the new class wizard), click OK and the set of empty methods appear at the end of the class.

A couple of enhancement suggestions:
- Wouldn't it be great if, when creating a new class in the New Class wizard, all the abstract methods from the inherited class appeared in the new class skeleton as empty methods?Logged enhancement request 2565904
- Likewise, how about adding an 'implement interface' wizard - right click a class, choose 'implement interface', browse to the interface in a browse window (a bit like the browse for class to extend feature in the new class wizard), click OK and the set of empty methods appear at the end of the class. This already exists, though not from the context menu. Tools | Implement Interface... will do exactly as you ask.

Implementing OAM - SSO for Multiple Applications

I am trying to implement OAM - SSO for 2 applications. I already have completed the setup of SSO for one application . OID -- OAM -- OHS ( 11g webgate ) - Weblogic Server - OBIEE . ( All the components are 11.1.1.5 version ).
Now I am looking to add a 2nd application ( OBIEE 11.1.1.6.5 version ) into the mix. So should I install a separate OHS and webgate for the new application or can I use the existing OHS to add another application.
Any tips on this would be helpful please.
Thanks

You may use the same OHS server in reverse proxy to the two applications and configure corresponding policies in OAM console.
Let us know if you get into any issues.

Annoucement: New Menu Wizard for Captivate

I'd like to announce our latest product release - the
Menu Wizard for Adobe Captivate
The
Menu Wizard is a 3rd-party software product that integrates
directly into published Adobe Captivate movies. The
Menu Wizard is a Flash movie that provides a dynamic menu -
a series of buttons that navigates to slides you specify within
your published Adobe Captivate movies. This is a frequently
requested feature for Captivate - and is often discussed here in
the Forums.
The
Menu Wizard uses a .XML file read the menu content and
settings. You can configure many options, including the number of
menu buttons, button text, background colors (up/over), font, font
size, font color (up/over), border width and color, drop shadow,
button size (height,width), location, horizontal/vertical layout,
transparency, and menu header options. The product is distributed
as an InstallShield release (setup.exe), with all the necessary
files, an example movie and menu, and a 19 page Instruction Guide
(.PDF) document.
The product website
Menu Wizard
Homepage contains detailed information about the product,
example movies, and FAQs.
July 23 Update: I've added a 15% discount throught August 6
for Adobe Forum users. Use the coupon code
adobeforum
Thank you,
Todd Haynes
KCWebPlaza

Dirk, the Menu Wizard does not have a feature to
restrict users from going to various sections (slides) until
they have visited other sections (slides).
However, you might be able to accomplish this by 1) using
some creative branching or 2) breaking your project up into
separate movies - 1 for each section. At the end of section 1 -
there is a Click Box or Button that will launch section 2. In this
case, the Menu Wizard would be used for navigation within 1 movie
(section) at a time.

How to create wizard for a custom mainenance view/view cluster

Hi Experts,
I have created 5 custom maintenance view and have maintained all the views sequencially and have made the first mainenance view as the start view & header entry and all other views are child or subview of the header view in a custom view cluster. But I want a wizard to help the user / end user successfully enter all the required values for all child views, it will help the user to navigate from the start view to all the child views where the fields of the wizard will be associated to the child maintenance views.
Please suggest how to create wizard for view cluster.
I'll give max reward point for the helpful answer.
Thanks in advance
koustav

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

HT2305 My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

Hello, BAHannebaum.
The article below should resolve any device not being recognized in iTunes issue that you are experiencing. The most common issues are the Apple Mobile Device Support driver or iTunes is outdated. Start with the first step and test the results after each step processed.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

Payment wizard for incoming payment.

Dear all,
we need to enter TDS amount in incoming payment wizard.when we are adding payment wizard for incoming payments there is no option for TDS amount. is it possible to create udf for payment wizard. how we can solve this issue please guide me.
Regds,
Sampath kuamr devunuri.

Hello Kumar,
Unfortunately, it is not possible to create a UDF in any wizard.
Kind Regards,
Marcella Rivi
SAP Business One Forums Team

No Implementing class registered for the Interface : ES-TransportationOrderSCMExecutionRequest_In

Dear PI Experts,
I'm currently working on an integrated solution between TM <=> PI <=>ECC. When I trigger the Shipment creation from TM to ECC, I received an error in the SXMB_MONI of ECC.
In the XML, I figured the error that No Implementing class registered for the Interface TransportationOrderSCMExecutionRequest_In .
May I ask you advices on this issue? Is it a mapping error on ECC or PI Side?
Thanks in advance for you help and advice.
Kr,
JP

Hi JP,
you can also refer the below wiki and blog
Step-by-step FTP to ABAP Proxy - Process Integration - SCN Wiki
ABAP Proxy Protocols: Use Cases and Examples
regards,
Harish

No implementing class registered for the interface (ABAP interface, request

Hi,
Proxy has been generated for the Inbound Message interface and i could see the SXMB_MONI entry in Red on the target system.
I get the error "No implementing class registered for the interface (ABAP interface, request...."
regards,
Chaitanya

Hi Chaitanya,
Try the below configuration in SXMB_ADM,if you don't have the authorisations to SXMB_MONI ask BASIS guys to do the below activities.
Go to SXMB_ADM.
Execute Integration Engine
EDIT----
> Change Global configuration data
select Role of Business System as Integration Server
Thanks,
Amar.

No implementing class registered for the interface

Hello,
I know that I'm not the first one posting this problem, but I can't find an appropriate solution for my problem. When I execute the FlightSeatAvailabilityCheck scenario I got the following error:
Unable to check flight availability.
Error Type:      XI system error
Error Details:      No implementing class registered for the interface (type ifmmessif, name FlightSeatAvailabilityQuery_Out, namespace http://sap.com/xi/XI/Demo/Agency )
I have to say that I accidently deleted the proxy but I have recreated and activated the concerning proxy (CO_SXIDAG_FSA_QUERY) and still get the error. I read in this thread: XI 3.0 Demo: Unable to check flight availability: XI System Error that it would help to create a RFC in sm59. Why do I have to do this although I'm using proxies?
And does it make a difference in which client I create and activate the proxies?
Regards
Marc

i tried following solution also from old messages in SDN -
Go to SXMB_ADM.
Execute Integration Engine
EDIT-> Change Global configuration data
Select the Role of Business System is Integration Server
Again started getting error-PROXY_NOT_ALLOWED_ON_IS:
Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
But again one of the messages in SDN suggests to change Global configuration data,
EDIT-> Change Global configuration data
Select the Role of Business System is Application system.
it seems it's going in loop....

How can i implement RMI Activatable for CORBA clients

Hi, i need some help to implement RMI Activatable for CORBA clients, i was reading the CORBA specifications, that is used PortableRemoteObject.exportObject(this) in the server contructor. but in hte moment to execute rmic -iiop returns the next error:
error: java.rmi.server.RemoteServer is not a valid remote implementation: has no
remote interfaces.
1 error
so. my question is. how can i implent this funtionality on my RMI server that extends Activatable class ?
i would like that you could give me some help, about it
greetings !!

You can't.

How to implement password policy for a software in oracle (sql) forms & reports 6i ?

Hi all , I have to implement password policy for an already existing software which was created 2 to 3 years before.
What exactly i want to do is I must alert the user every month to change his/her password. I have no idea about it.
Can anyone help me how to start with it? Or can you provide me the links where i can learn & implement in the software?
Oracle Forms & Reports Builder 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production.
Thank You.

You can try this:
Establishing Security Policies
Using database policy, you can force user to change password with Oracle forms 6i.
Regards

Implementing ACH Payments for Garnishment Child Support in US Payroll

Hi Experts,
My client wants to implement ACH Payments for Garnishment Child Support in US Payroll instead of mailing live Checks.
Can you please provide me with the Standard config settings/SAP documentation needed to achieve this functionality.
I also need a questionaire to gather the Business Requirements.
Regards,
Somdeb.
Edited by: Somdeb Banerjee on Oct 1, 2010 12:09 AM

Hi Experts,
I have a few queries at this juncture:
1) For example, let's say there is vendor (say 108001 )and there are three employees whose Support Garnishments are going to this vendor.
Now If u201CIssue Separate Check to Vendor u201Cfield is checked in IT0194, does this ensure separate line items/entries for each employee in the ACH file format.
2) Can we assign only Vendor (say 108001 ) everytime in IT0194 for any employee with Garnishment Category u2013 Support.
3) Can a Vendor ask for the same ACH file in both the formats - CTX and CCD ? If yes, does that mean there will be two payment runs in FI, one for each format.
Can you please help.
Regards,
Somdeb.

Implementation of Wizard for CS01

Similar Messages

Maybe you are looking for