Implementing Drag & Relate

Hi,
I am working on Drag & Relate functionality in EP. Can any one tell me the steps to implement the Drag & Relate.
I read in some document, in iview properties we need to make Drag& Relate Target as True. But i didnt find any property with that name for iviews. For which iviews i can find that.
Thanks,
Satish

Hi Satish,
Check the settings under Default Framework Page,
Content Administration->Portal Content->Content by SAP->End User Content->Standard User->Default FrameWork page
Open the Default Framework Page, select Desktop Inner Page and selct Open.
Check the boxes against Drag and Relate iView there if these are unchecked.
You can also open this Drag and Relate iView to check its properties.
Thanks,
Vamshi

Similar Messages

Define main objects for Drag & Relate between BW 3.1 and EP6

hi all.
We are trying to implement Drag & Relate between BW 3.1 and EP6.
We have 2 different BW reports based on the same object "0MATERIAL". One of them should be a source and the other is the target. When creating the iViews for these reports the "main object" property has no values, therefor we don't see any symbol near the object we want to drag. The import of the "0MATERIAL" object from BW to the portal was successful.
Is it related to customizing the BW system or the portal?
thanks,
Sagi

I solved the problem - I added the BW alias before the main object name in the main object property. For example "BW.0MATERIAL" when BW is the BW system alias and 0MATERIAL is the object name.
Sagi

Drag & Relate between two BW reports

Hello together,
I want to implement the Drag&Relate functionality between two BW Reports via EP 6.0. I have configured the connection between Portal and BW with the report RSPOR_SETUP. The SingleSignOn and the import of business object is working well. After that, I took 2 BW testreports which were prepared for D&R. When I now drag the customernumber of report1 to the target report2, I get the error message "No relation found between the source and target business objects". The business object in both reports is 0CUSTOMER, so what relations should be set?
Where is the mistake, could anybody help me?
Thanks and regards.
Gerd Nedderhoff

Hi Gerd,
You have to link the two iviews. First double click the first iview. Then right click the second iview and make it as the target iview. Then in the navigation panel you see the other iview in the Drag and relate section.
Regards
Arun

Steps for Drag & Relate

Hi everyone,
To enable a drag & relate scenario for SAP R/3 system, what are the exact steps to implement this? I've been reading about setting up SAP R/3 system for Drag&Relate on the SAP Library. Must this occur first prior to the setting up the configuration within the portal? Has anyone have experience setting up a SAP R/3 scenario using Drag & Relate?
Thanks,
Jin Bae

Jin,
You can find all needed documentation in SAP Market place.
Soon I'll publish Weblog about how to create Drag and Relate for SAP backend systems - the easy way.
For the meantime you can view the Weblog of Aviad Rivlin "1,2,3 Drag and Relate..." where he described how to provide Drag and Relate for SQL backend system. From this weblog you will understand the general idea of the technology.
Regards,
Julia

Como alterar o título dos menus Drag & Relate? (Urgente)

Prezados,
Alguém poderia me auxiliar se é possível ou não alterar o título das linhas do menu Drag & Relate?
Uma vez que eles não são tratados como Menu, ou sejam, não possuem um MenuID, para fazer a alteração como a de um menu padrão.
Alguém já passou por esta situação, que poderia me auxiliar?
Agradeço,
Francislaine M. Souza

Francislaine,
Depois de muito tentar posso te assegurar que até o PL 36, não existem funcionalidades para isto.
Marcus

SAP B1 Drag & Relate causes DMP Error

SBO Version: 8.82 PL09
Forum,
We have noticed for windows 7 / windows 8.1 machines that when we come to use the 'Drag & Relate' facility, it is causing those SAP clients to crash with the following error:
I have found on this forum a thread which indicates this may be a bug, fixed in 8.82 PL10. Is anyone able to provide me with the SAP Note number?
Thanks,
Sarah

Hi,
Please attach found thread here to check. Also check SAP note:
1755387 - Overview Note for SAP Business One 8.82 PL09
Thanks & Regards,
Nagarajan

Incorrect access restriction in Drag & Relate

Hi,
I am encountering an access issue in Drag & Relate function. I have created two numbering series for Purchase Orders. PO and YPO. "User 1" can access the Purchase Orders with the series PO and "User 2" can access the ones with "YPO". I have set the authorisations for Series for the mentioned users.
When "User 1" tries to view the Purchase Order for an item in Drag & Relate, the system displays the list of Purchase Orders for this item regardless of the Series. If the "User 1" tries to drill down the Purchase Orders with series "YPO", the system correctly blocked the user from accessing the details as he has no rights to view the series "YPO".
However, if there is one Purchase Order for the searched item, in Drag & Relate the system does not block the user to drill down and view the details.
How can I restrict access if there is one Purchase Order for an item and user is not supposed to see the mentioned Series?
Thank you.
Regards,
Yadana

Hi Yadana,
You may refer to the following thread first:
Re: Data Ownership
Hope this helps
Kind Regards
Victor

Drag&Relate with error 'no matching records found' when adding UDF columns

in SBO 2007A I added a large amount of UDF fields to marketing documents title section. Then I tried Drag&Relate, as result i got only the error 'no matching record found ....'.
I removed some of the UDF Fields and Drag&Relate works correct. It seems to be a length problem of the table row. But I have no information about such a restriction and the error message dont say anything about length problem.
Does anybody know about this behavior and the maximum length of table rows, or is there any other solution to fix this problem?

Hello,
there are approximatly 170 fields and most of them are alphanumeric (internaly nvarchar(max)) - when i remove 2 fields it works.
Best regards
Klaus
Edited by: Klaus Steinkellner on Jan 13, 2011 4:27 PM

Implementing a relational task database with recurrence using the Outlook 2013 calendar

Hello,<o:p></o:p>
I am looking to implement a relational task database whereby recurring tasks are instantiated at fixed frequencies. I have a number of custom attributes that I want to assign to all tasks in
this database. Outlook/Exchange seem like they may not provide the ability to customise attributes in a powerful enough way for this purpose. However, Outlook/Exchange have powerful recurrence logic which I would like to avoid re-writing. I was wondering if
you might have any suggestions for where to look for either a third party task database product that provides recurrence or whether you think this could be sensibly built into
the Outlook/Exchange environment. Also, we are heavy users of MS CRM, so, ideally, the solution would reside there. However, unfortunately, MS CRM does not seem to have a powerful recurrence engine like Outlook/Exchange do.<o:p></o:p>
Many thanks.<o:p></o:p>
Keith<o:p></o:p>
R K Howard

Good Idea. But I'm afraid there is no build-in function in Outlook/Exchange environment so far. Have you considered the solution from Microsoft Dynamics ?
http://www.microsoft.com/en-us/dynamics/default.aspx
Tony Chen
TechNet Community Support

Item Filter in Drag & Relate menu is case sensitive

Hi All,
I'm trying to do Filter Table in Drag & Relate - Sales Order Details with this criteria Item Description contains = 'color', the filtering did not give me any record. Instead i must key-in 'COLOR' in big caps. Does anyone try this? Thanks
rgds,
vin

Hi Melvin,
The way drag and relate works is as follows:
1.You click on Drag and Relate.
2. You can click on say Sales -A/R to expand its submenu items
3. You double click on say Sales Order, it opens up all the sales orders for all the customers. You can close this if you want now.
4. You now have to open something else, suppose you want to find out all sales orders for a busines partner then you click on open BP either through modules tab or drag&Relate tab. Your choice.
5. Place your curser on BP code and press and hold left mouse button. Now drag that code and drop it on the SaleOrders submenu within Sales-A/R of DragAndRelate.
Result Voila, you got your sales orders for that BP (Customer).
The way you are using does not seem right. You can not arbitarily drag and drop everything and anything. You can drag and drop BP Code, Item Code etc.

Portal Runtime error during 1, 2, 3 Drag & Relate?

Hi,
I have successfully install SR1 version of the EP6. I am attempting to complete the "1, 2, 3 Drag&Relate" weblog. During one of the steps you have to go to User Administration > User Mapping to set the Everyone group user mapping.
I am using sa id and the password I set during my SQL installation.
As I click save button after entering the input I get this error:
Portal Runtime Error
An exception occurred while processing a request for:
iView:
pcd:portal_content/administratrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name: com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 2:07_11/01/2005_0001_4582650
See the details for the exception ID in the log file.
Any ideas why this error is occuring?
Thanks,
Jin Bae

Hi Jin,
I think SAP note number 796540 will be helpfull to you.
It was known User Management issue which is not connected to any Unification feature.
Personal advice: try to restart Portal server.
Regards,
Julia

Air mobile best way to implement drag and drop

Hi all,
I'm developing an application which allows people to drag and drop certain panels.
But the dragmanager isn't optimized for the air mobile platform.
What is the best way to implement drag and drop at the moment?
Write it all yourself or are their some utility classes that can help?

Hi all,
I'm developing an application which allows people to drag and drop certain panels.
But the dragmanager isn't optimized for the air mobile platform.
What is the best way to implement drag and drop at the moment?
Write it all yourself or are their some utility classes that can help?

Drag&Relate in SAP Portal 7.0

Hello experts,
I have a problem in SAP EP 7.0. I need to use Drag&Relate technology but in this version is not possible because this functionality is discontinued. The reason is that there is a technical reengineering of the Distributed Query Engine (DQE) technology.
But, what can I do? Is there any way to reproduce similar functionality?
Thanks in advance,
Belen

Hi there Belen,
I have the same problem, only that I am using EP 6.0 SP16. The DQE doesnt start because of the "Technical reengineering" and there are a number of related functions that are not available in the portal..
For example, I am not able to add Drag and Relate targets to iViews, there is no option for adding it in the detailed Navigation. There is also no Unification section in System Administration. I am really frustrated about it..
Have you found out anything regarding Drag and Relate technology and if it will be continued again in the future? Do let me know if you have found anything regarding it.
Thanks,
Sameer

How to implement Drag and Drop in trees

Hi,
I have two hierarchical tree in a form, i need to drag each nodes form one tree node and drop into another tree, how i possible. am using Forms 6i developer.

Drag-n-Drop is only available in Forms by extending Forms with a Java Bean. In order to use a Java Bean in your form, your form MUST be web deployed; if you are using traditional Client/Server with your Forms 6i then there is no way to implement Drag-n-Drop.
Take a look at: Drag 'n Drop - Oracle Forms PJC and Java Beans. This article was based on using Oracle Forms 9i so you might not be able to implement it in your Forms 6i app.
Craig...

Drag & relate problem in Query Iview

Hi,
I just trying the weblog
1-2-3 Drag&Relate (or D&R for dummies)
So all the steps mentioned in that i have followed properly but in Content Admin --> unification under Business Objects i do get sales and stores and i define them according to weblog as source and destination but under edit mode Relation Type is Empty which i think should be manual or something and all the other things are same as shown is screen-shot of the weblog and also in the enduser screen i get message
<b>Query execution failed. Exception message: Error trying to execute a query statement against MetaMatrix: Error trying to establish connection to the EIS : null</b>
So i have no clue what could be possible problem
Kindly Help
Regards,
Ricky

Hi shivasankaran ,
we also face this problem some times. at this particular issue...
we should make report 4r month wise only y because our excel sheet contains 65000 lines limit if ur drilling down more fields
from free characterisitc. it cant display.
IF ur case is mandetory to drag 2moths r 3months. just try to reduce drill down fields (r) if this also mandetory, use 2010 microsoft sheet 4r reporting this can use up to 1lac line.
if this also not working. just do this, let me give one example if we r drilling down material & customers 4r 3-4months. one customer can buy N number of material so it will eceeds. just see wht ur drilling down first material (r) customer. if first material & customer this is not working, drill customer & material.
think this will help, any way let me know wht happen.
Regard's
venky

Implementing Drag & Relate

Similar Messages

Maybe you are looking for