Implementing Dynamic Target Locations

I want to change the Target Location dynamically as it moves through the ETL process.
My Directory structure is
\in - new flat files are pushed into this directory for processing
\staging new flat files are picked and moved to this directory for processing
\staged the processed files are moved to this directory
\error errored files moved to this directory for further investigation
The moment the files are pushed into the \in directory, the ETL/OWF process will be called.
The ETL process will move the files into \staging directory and OWB mappings are called to do the staging process.
Once the staging process is done, the files are moved to \staged directory.
If there are errors in the files
will be moved to /error directory.
Is this possible to accomplish this using OWB/OWF ?
I am using OWB 9.2.0.2.8 and OWF 2.6.1.5.2.
Thanks

Any Help gratly appreciated.. Please throw some light !!
Thanks
Shree

Similar Messages

File Adapter : Dynamic Target Directory

Hi EveryBody,
I have an IDOC to File Scenario in which based on some field value X in IDOC i need to send the file to Different locations under the same FTP Server.
For Example : if X = 01 then Target folder T1
X = 02 then Target folder T2.
Can somebody help me out on the same.Possibly this can be done by Dynamic Configuration.Can somebody send me some links.
Regards,
Zabiulla

Hi,
First of all I would suggest to avoid the mail communications for the query.
Its against the SDN rules.
please read [Rules of Engagement|/thread/117188 [original link is broken];.
About Solution, you need not have to go for Dynamic Target Directory
You can use the Variable substitution concept here.
In the Target directory pass the %Var1%
and use Var1 ---> payload:<fieldName>
Refer to the last part of this link to understand this better,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
For dynamic configuration you can also refer below link
Dynamic configuration of Receiver FTP File channel
Thanks
Swarup

Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

Hi There,
All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
Some of the specified files already exist in the target location. The files marked below will be replaced:
filename.eps
filename-01.eps
We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
All machines are new Quad-core MacPros running:
- Leopard 10.5.8
- Illustrator CS4 14.0.0
We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
Is anyone else experiencing this behavior?
Any help or pointers in the right direction would be much appreciated.
Cheers
Ben

Thanks for the reply.
The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
Why do we still use eps?
Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
Cheers, and thanks for the help.

ITunes won't open because target location is unknown.

I've downloaded the new version of iTunes and when I try to open it up, it does nothing. I was curious so I looked in the properties and I noticed it has no TARGET LOCATION, hence it's inability to open. Also, where it says TARGET, it only says iTunes. It won't let me edit these in any way, so I'm so confused on what to do.
Has this happened to anyone else?
Thanks.
Windows XP

Megan hello,
welcome to the Apple Discussions open the iTunes folder in your Music folder and select the iTunes 4 Music Library file... type cpmmand - D and this will duplicate the file... put the original file on the desktop and change the name of the duplicate to be the same as one you just moved ... double/click on this file after the name change... if all is okay you can trash the file on the desktop later..
let's know if it all works again Megan .... TP

SOAP adapter and dynamic target URL

My scenario: synchronous communication ABAP Proxy <=> XI <=> External WebServices.
There is a need to have configurable (dynamic) target URL for SOAP Adapter. This target should be configurable from ABAP Proxy. Any idea how can I achieve my goal?
Some additional notes why I need configurable target URL. I've multiple WebService instances which has identical interfaces and the only difference is target URL. I see no need to define for each webservice different SOAP Adapter. The other thing is that customer want to have configuration of destination (target) url on backend system (where ABAP Proxy is used).

Check http://help.sap.com/saphelp_nw70/helpdata/EN/29/5bd93f130f9215e10000000a155106/frameset.htm
It's possible to set the URL for Soap dynamically.
To process adapter attributes in the message header of the XI message, set the Use Adapter-Specific Message Attributes indicator and the Variable Transport Binding indicator.
You can evaluate the following attributes in the message header:
Description: You can set the entire URL.
Technical name: TServerLocation

"Not enough memory in target location" error in de...

When I try to download and "save to device" any files from any website of any size, I am receiving the "Not enough memory in target location" error. It's very frustrating . To reproduce I only need to do a "long tap" on the google image on the default google page and select "save image as" and select any location (eg. documents, root (MyDocs), create new folder) and I get the error. Once the error is displayed, most of the time I can't get rid of it and need to do an "End current task" to close the browser.
I have checked the output of a "df -h" and there is PLENTY of space on all volumes, including rootfs (95.1M Free) and /dev/mmcblk0p1 (25.9G Free!).
I've tried flushing the '/home/user/.mozilla/microb' directory and deleting the '/home/user/.browser' file also.
I can transfer files from my PC connected in Mass Storage mode with no problem, I can also create directories and files from X-Term also with no problem.
The only information I can find on this error is related to rootfs being out of space when trying to install an app or update...but this is not my problem.
I have a feeling it could be a permissions issue, anyone have any suggestions?

Hi cpitchford. I have a similar problem. I can't save a bookmarks in the MicroB explorer. The system says "Not enough memory". I read your post and send you the screenshot for the xterm. Thank you for your time. Let me know if you need more informartion about the issue
Attachments:
screenshot03.png ‏93 KB
screenshot04.png ‏98 KB

Where is the best target location to put configuration files (.csv), report templates (,dotm) and instructions (.pdf) when building a LabVIEW program and installer?

I am unsure of the best location to the above type of support files. I would like the files to be available to all users accounts. If I place them into something like c:\LabVIEW support files this can create an issue if manual changes are made to any of these files by a user without administrative rights. I can also place them into public documents. Any recomendations?
Related. I have added a PDF "help" file to the project. and given a path in the VI properties documentation field. I have then added a custom runtime menu with "Help for This VI". Running the application on my development machine, it works just fine. Making this in an application installed on a test machine, results in the application crashing. The PDF file is in the correct location on the target machine. Any ideas?

It seems you want to put the files where just any user can't get to them to edit them. Unfortunately, if the user account can't get to them, I don't think LV will be able to get to them. I could be wrong. To test this out, use a target location somewhere under your user account folder and then have another user try to run the app. if LV finds them then that gives you more options. If not, then you are going to have to have a common location that users are not likely to go to.
I generally create a dedicated folder structure for LV apps on a target system as shown below. I also make this the My Documents folder so that the LabView Data folder is created under this structure. Yea, it means that users can get to the files but that's where training needs to be executed. If you are in a network environment, you can place the templates, config (ini) files, etc on a network location and users are a bit less likely to inadvertently navigate to them.
I use both for some apps, Local folders for system specific files and Common folders on the network for files that all systems will share.
Not sure if this will address your location issues but thought I would share it nonetheless.
Doug
"My only wish is that I am capable of learning each and every day until my last breath."

How to open the target location in the same window using tomahawk menu

Am using apache tomahawk menu component.
We have a mix of locations that are internal path and also external URL. However, we need to open the location in the same window.
We are using the
<t:jscookMenu layout="hbr" theme="ThemeIE" >
<t:navigationMenuItem id="nmi1" itemLabel="Menu1" action="welcome" />
<t:navigationMenuItem id="nmi1_1" itemLabel="Menu11" action="http://www.google.com/" target="_self" />
</t:jscookMenu>
The component open the external URL in a new window irrespective of the target location. Is there a way to override this behavior.
-Thanks

Check that there isn't a <BASE> element in the HEAD element.

Dynamic Image Location in JRC

Hi ! We are interested in using so called dynamic image location future in JRC. So far we are unsucessful, so the question is, is it supported in JRC ? We are able to get dynamic image location future working in report designer, but when our report is exported there is no image only path to it. We use Crystal Reports 11 R2, Java Reporting Component in JSP version. Mac

I have a couple of reports working with dynamic images. CR4E doesn't support this (yet?!?), but you can still do it with the JRC. The big kicker is the syntax of your URL. If you're using a static image on a server somewhere, it should work with no problem. However, if you're using a generated image, it's a little trickier. I discovered this when I was creating a report with barcode labels. The barcodes were not getting generated. I turned on debugging and found that the JRC was screwing up my url. The url was as follows http://myserver/barcode?message=12345 67890&format=datamatrix.
In the logs, the JRC said it couldn't find an image at the url
http://myserver/barcodemessage=12345+67890&format=datamatrix. It was stripping out the ? in the url, which is kind of an important character to say the least. I messed around with it and eventually found that if I just put ?? instead of ?, the image would display correctly with the JRC. Hope this helps! If not, post what version of the JRC you're using and the URL you're using for the image location.

How to implement Dynamic SQL in DataService ??

Hi,
Is there any way in ALDSP to implement Dynamic SQL in Dataservice ?
My scenario is "based on set of optional fields i need to join different tables.If the optional field is not there then i don't have to join with the corresponding table."
Thanks

Ah yes, I thought that looked familiar. It's same question from July 12.
There is no way to generate Dynamic SQL in DSP XQuery. There is one query plan for each query. The query plan does not change based on the inputs.
Using a FilterXQuery on top of a query actually generates a new query. You can play with that if you like, but it is not particularly suited to changing joins. Go with the ad hoc query.

Error RTC-5346 in registering target location in OWB Deployment manager.

Hello!
Dear experts, I've got DB 10GR2 and I downloaded OWB 10.1. I've installed OWB successfully and began to look through the samples. And during my trying to register a target location (when I looked through the sample "Deploying targets") Ive got an error : RTC-5346 :the oracle database location 10.1 is not equal to target version 10.2. As I mentioned before, my DBs version is 10.2 and OWBs version is 10.1. May be it is the matter?
So, what would you suggest me in such a situation? Do I have to fulfill any patches or something like that?
Thanks in advance,
Alexey.

Detlef,
your right. Apparently, the information I got only applied to OWB 10g versions 10.1.0.2.0 and 10.1.0.3.0 which are not certified against an DB 10g R2, because of BUG 4537766...
For 10.1.0.4.0 there is indeed no problem.
Grtz.
Philip.
Message was edited by:
[email protected]
Message was edited by:
[email protected]

RPE-01011 target location incompatible / repository and target are same 11g

I got systematically error RPE-01011 signaling my target location is incompatible. My repository and my target are the same instance and i didn't change anything in the settings. The instance is an 11g database. I don't understand what the problem is. All scripts are execting correctly when i install then manually.

I am having the same problem trying to deploy objects created as per Oracle by Example: Oracle Warehouse Builder 11g. The database version is 11g Release 11.1.0.6.0 and all locations have 11.1 version. This is the second time I am running this tutorial, this time I modified the setup scripts to replace 10.2 by 11.1 but after rerunning all previous tutorials I got the same error.

Dynamically Changing Location Attributes

Hi All,
Has anyone ever successfully set up a BefConsolidate event script with a dynamically changing location attribute. The FDM Admin manual says you can do this:
RES.PblnValEntGroupOverride=True
RES.PstrValEntGroup=”MyNewEntityGroup”
It does not work for me when I sub in a new Validation Entity Group. Has anyone had luck with this? See my actual code below. The new validation group name is 281.
Sub BefConsolidate(strLoc, strCat, strPer, strTCat, strTPer, strEntGroup)
RES.PblnValEntGroupOverride=True
RES.PstrValEntGroup="281"
End Sub
Thx,
Mike

Hello,
Yes I am able to write to file before end if. I also took out end if statement which to me would me FDM would fire the event for all locations without restriction.
I have not tried the same code in other event script. Would that work? The RES statement specifically relates to a consolidation trigger. I can try another event to see.
Thanks.

Dynamic Image Location?

Hi Experts
How can I use Dynamic Image location in my Crystal Reports?
Thnaks in advance
AG

Techy Guy,
In the properties of your image, you can set the location as a formula. Here, you can set the path by IF-ELSE statements:
IF {letter.city} IN ["Arnemuiden","Kleverskerke","Middelburg","Middleburg","Nieuw- en Sint Joosland","Sint Laurens"]
OR LowerCase({letter.city}) LIKE "*joosland"
THEN ".\Middelburg.png"
ELSE
    IF {letter.city} IN ["Oost-Souburg","Ritthem","Vlissingen"]
    THEN ".\Vlissingen.png"
    ELSE ".\Middelburg.png"
In this formula, the logo will be depending on a the city the recipient is in. If the city is not in one of these two options, Middelburg.png will be used as default (to have at least a logo in the letter).
You could even use a field to define the image name:
".\Flags\" + {Customers_.Country} + ".png"
will point to the directory 'Flags' in the same directory as your report is. Here, it will locate the .png file having the same name as the country field in the customers database (i.e. France.png).

TS1292 Good morning I received a 25$ itunes card as a gift yesterday, I know it was bought in the target located in 10880 Olson Dr on friday November 30th, but it says that the card has not been activated, currently I dont have the receipt can you please

Good morning I received a 25$ itunes card as a gift yesterday, I know it was bought in the target located in 10880 Olson Dr on friday November 30th, but it says that the card has not been activated, currently I dont have the receipt can you please help me

Normally what you should do is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. Since you have no receipt, though, it's unlikely that Target will help you, so go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store.
Please note that everyone here is just a felllow user, so you should post no personal information as it will quickly become public.
Regards.

Implementing Dynamic Target Locations

Similar Messages

Maybe you are looking for