IMPLEMENTING GUI SATUS FOR THE LIST

HI
I am a newbie to ABAP and netweaver.
I am currently studying BC400 and doing exercise 17.
Unfortunately the whole explanation of how to add or remove functionaly from
buttons (Save for instance) is very lacking.
Can someone refer me to a better source/tutorial that explains
how SET PF-STATUS 'LIST'
is implemented?
Thanks
yuval

Hi,
The below one i copied from the web ..
You set the dialog status for lists in the same way as for normal screens, that is, using the statement
SET PF-STATUS <stat> [EXCLUDING <f>|<itab>]
                     [OF PROGRAM <prog>]
                     [IMMEDIATELY].
This statement sets the status <stat> for the current output list. The dialog status <stat> must be defined for the current program, unless you have used the OF PROGRAM addition to set a status from another program <prog>. The status is active for all subsequent list levels until you set another status. The SY-PFKEY system field always contains the status of the current list.
Using SET PF-STATUS, you can display different user interfaces for different list levels to provide the user with different functions according to the individual requirements. Use SET PF-STATUS SPACE to set the standard list status. This depends on the event blocks in the program, as described above.
The EXCLUDING option allows you to change the appearance and available functions of a status from within the program. This is useful if the individual user interfaces for a range of list levels are very similar. You can define a single global status, and then just deactivate the functions you do not need using EXCLUDING. Specify <f> to deactivate the function code stored in field <f>. Specify <itab> to deactivate all function codes stored in the internal table <itab>. Field <f> and the lines of table <itab> should be defined with reference to the system field SY-UCOMM.
The IMMEDIATELY addition is intended specially for list processing. You use it while creating a detail list within an event block to change the status of the list currently displayed (index SY-LISTI). Without this option, the system changes the status of the current secondary list (SY-LSIND) that is displayed only at the end of the processing block.
Regards
Sudheer

Similar Messages

  • How to implement tool-tip for the list items for the Choice column in SharePoint 2013

    I had created a simple list with a "Choice" column, i have three entries in my drop-down, 
    First Entry
    Second Entry
    Third Entry.
    If i select any entries in drop-down and hour-over (Second Entry), a
    tool-tip need need to show. 
    Is it possible? If yes how to implement any help will be appreciated.

    Hi,
    We can use JavaScript to achieve it.
    The following code for your reference:
    <script type="text/javascript" src="/sites/DennisSite/Shared%20Documents/js/wz_tooltip.js"></script>
    <script type="text/javascript" src="/sites/DennisSite/Shared%20Documents/js/jquery-1.11.1.min.js"></script>
    <script type="text/javascript">
    $(function () {
    $("select[title='Choice']").change(function(){
    Tip($(this).val());
    $("select[title='Choice']").mouseout(function(){
    UnTip();
    </script>
    Download wz_tooltip.js:
    http://www.walterzorn.de/en/tooltip/tooltip_e.htm#download
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How to implement tooltip for the list items for the particular column in sharepoint 2013

    Hi,
    I had created a list, How to implement tooltip for the list items for the particular column in SharePoint 2013.
    Any help will be appreciated

    We can use JavaScript or JQuery to show the tooltips. Refer to the following similar thread.
    http://social.technet.microsoft.com/forums/en/sharepointdevelopmentprevious/thread/1dac3ae0-c9ce-419d-b6dd-08dd48284324
    http://stackoverflow.com/questions/3366515/small-description-window-on-mouse-hover-on-hyperlink
    http://spjsblog.com/2012/02/12/list-view-preview-item-on-hover-sharepoint-2010/

  • Event for the List Box in ALV Grid Control

    Hello,
    I have the below urgent requirment.
    I have an ALV Grid Control built using ABAP Objects. In the grid, I have few fields and one of these fields is a List Box. Depending on the values selected, I need to enable or disable some fields. So, is there any event for the List box in ALV Grid Control.
    For ex: I have 2 Fields, Designation and Commission. The designation field is a List Box field having 'Software Engineer' and 'Manager' as values. When I select 'Software Engineer', the commission field should be disabled. When I select 'Manager', the comission field should be enabled.
    Early reply is hightly appreciated.
    Priya

    REPORT  ZTEST1234    MESSAGE-ID ZZ                           .
    DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
    DATA: L_VALID TYPE C,
          V_FLAG,
          V_DATA_CHANGE,
          V_ROW TYPE LVC_S_ROW,
          V_COLUMN TYPE LVC_S_COL,
          V_ROW_NUM TYPE LVC_S_ROID.
    DATA: OK_CODE LIKE SY-UCOMM,
          SAVE_OK LIKE SY-UCOMM,
          G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
          GS_LAYOUT TYPE LVC_S_LAYO.
    DATA:BEGIN OF  ITAB OCCURS 0,
         VBELN LIKE LIKP-VBELN,
         POSNR LIKE LIPS-POSNR,
         COMISN(10),
         CELLCOLOR TYPE LVC_T_SCOL, "required for color
         DROP(20),
        <b> HANDLE_STYLE TYPE LVC_T_STYL,</b>
         END OF ITAB.
    *       CLASS lcl_event_handler DEFINITION
    CLASS LCL_EVENT_HANDLER DEFINITION .
      PUBLIC SECTION .
        METHODS:
    **Hot spot Handler
        HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
                          IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
    <b>**Handler to Check the Data Change
        HANDLE_DATA_CHANGED FOR EVENT DATA_CHANGED
                             OF CL_GUI_ALV_GRID
                             IMPORTING ER_DATA_CHANGED
                                       E_ONF4
                                       E_ONF4_BEFORE
                                       E_ONF4_AFTER,</b>
    **Double Click Handler
        HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
                                         IMPORTING E_ROW E_COLUMN ES_ROW_NO.
    ENDCLASS.                    "lcl_event_handler DEFINITION
    *       CLASS lcl_event_handler IMPLEMENTATION
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
    *Handle Hotspot Click
      METHOD HANDLE_HOTSPOT_CLICK .
        CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
        V_ROW  = E_ROW_ID.
        V_COLUMN = E_COLUMN_ID.
        V_ROW_NUM = ES_ROW_NO.
        MESSAGE I000 WITH V_ROW 'clicked'.
      ENDMETHOD.                    "lcl_event_handler
    *Handle Double Click
      METHOD  HANDLE_DOUBLE_CLICK.
      ENDMETHOD.                    "handle_double_click
    <b>**Handle Data Change
      METHOD HANDLE_DATA_CHANGED.
        DATA: X_CHANGE TYPE LVC_S_MODI,
                X_FINAL TYPE ITAB,
                L_FLAG,
                LS_OUTTAB LIKE LINE OF ITAB.
        DATA: LS_EDIT TYPE LVC_S_STYL,
              LT_EDIT TYPE LVC_T_STYL.
        LOOP AT ER_DATA_CHANGED->MT_GOOD_CELLS INTO X_CHANGE.
          IF X_CHANGE-FIELDNAME = 'DROP' AND X_CHANGE-VALUE = 'S/W ENGINEER'.
            LS_EDIT-FIELDNAME = 'COMISN'.
            LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
            LS_EDIT-STYLE2 = SPACE.
            LS_EDIT-STYLE3 = SPACE.
            LS_EDIT-STYLE4 = SPACE.
            LS_EDIT-MAXLEN = 8.
            INSERT LS_EDIT INTO TABLE LT_EDIT.
            INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
            MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB  TRANSPORTING
                                              HANDLE_STYLE .
          else.
            LS_EDIT-FIELDNAME = 'COMISN'.
            LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_ENABLED.
            LS_EDIT-STYLE2 = SPACE.
            LS_EDIT-STYLE3 = SPACE.
            LS_EDIT-STYLE4 = SPACE.
            LS_EDIT-MAXLEN = 8.
            INSERT LS_EDIT INTO TABLE LT_EDIT.
            INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
            MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB  TRANSPORTING
                                              HANDLE_STYLE .
          ENDIF.
        ENDLOOP.
        CALL METHOD G_GRID->REFRESH_TABLE_DISPLAY
          EXCEPTIONS
            FINISHED = 1
            OTHERS   = 2.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                     WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDMETHOD.                    "HANDLE_DATA_CHANGED</b>
    ENDCLASS.                    "LCL_EVENT_HANDLER IMPLEMENTATION
    *&             Global Definitions
    DATA:      G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
                G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
    *- Fieldcatalog for First and second Report
    DATA: IT_FIELDCAT  TYPE  LVC_T_FCAT,
          X_FIELDCAT TYPE LVC_S_FCAT,
          LS_VARI  TYPE DISVARIANT.
    *                START-OF_SELECTION
    START-OF-SELECTION.
      SELECT VBELN
             POSNR
             FROM LIPS
             UP TO 20 ROWS
             INTO CORRESPONDING FIELDS OF TABLE ITAB.
    END-OF-SELECTION.
      IF NOT ITAB[] IS INITIAL.
        CALL SCREEN 100.
      ELSE.
        MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
      ENDIF.
    *&      Form  CREATE_AND_INIT_ALV
    *       text
    FORM CREATE_AND_INIT_ALV .
      DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
      CREATE OBJECT G_CUSTOM_CONTAINER
             EXPORTING CONTAINER_NAME = G_CONTAINER1.
      CREATE OBJECT G_GRID
             EXPORTING I_PARENT = G_CUSTOM_CONTAINER.
    * Set a titlebar for the grid control
      CLEAR GS_LAYOUT.
      GS_LAYOUT-GRID_TITLE = TEXT-003.
       <b>GS_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.</b>
      GS_LAYOUT-ZEBRA = SPACE.
      GS_LAYOUT-CWIDTH_OPT = 'X'.
      GS_LAYOUT-NO_ROWMARK = 'X'.
      GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
    <b>  CALL METHOD G_GRID->REGISTER_EDIT_EVENT
        EXPORTING
          I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.</b>
      CREATE OBJECT G_HANDLER.
      SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
      SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
    <b>  SET HANDLER G_HANDLER->HANDLE_DATA_CHANGED FOR G_GRID.</b>
      DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
      DATA: L_INDEX TYPE SY-TABIX.
      "Here i am changing the color of line 1,5,10...
      "so you can change the color of font conditionally
      LOOP AT ITAB.
        L_INDEX = SY-TABIX.
        IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
          LS_CELLCOLOR-FNAME = 'VBELN'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
          LS_CELLCOLOR-FNAME = 'POSNR'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
        ENDIF.
      ENDLOOP.
    * setting focus for created grid control
      CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
        EXPORTING
          CONTROL = G_GRID.
    * Build fieldcat and set editable for date and reason code
    * edit enabled. Assign a handle for the dropdown listbox.
      PERFORM BUILD_FIELDCAT.
      PERFORM  SET_DRDN_TABLE.
    * Optionally restrict generic functions to 'change only'.
    *   (The user shall not be able to add new lines).
      PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
    **Vaiant to save the layout
      LS_VARI-REPORT      = SY-REPID.
      LS_VARI-HANDLE      = SPACE.
      LS_VARI-LOG_GROUP   = SPACE.
      LS_VARI-USERNAME    = SPACE.
      LS_VARI-VARIANT     = SPACE.
      LS_VARI-TEXT        = SPACE.
      LS_VARI-DEPENDVARS  = SPACE.
      CALL METHOD G_GRID->REGISTER_EDIT_EVENT
        EXPORTING
          I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.
    **Calling the Method for ALV output
      CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
          IS_VARIANT           = LS_VARI
          IS_LAYOUT            = GS_LAYOUT
          I_SAVE               = 'A'
        CHANGING
          IT_FIELDCATALOG      = IT_FIELDCAT
          IT_OUTTAB            = ITAB[].
    * Set editable cells to ready for input initially
      CALL METHOD G_GRID->SET_READY_FOR_INPUT
        EXPORTING
          I_READY_FOR_INPUT = 1.
    ENDFORM.                               "CREATE_AND_INIT_ALV
    *&      Form  EXCLUDE_TB_FUNCTIONS
    *       text
    *      -->PT_EXCLUDE text
    FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
    * Only allow to change data not to create new entries (exclude
    * generic functions).
      DATA LS_EXCLUDE TYPE UI_FUNC.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
    ENDFORM.                               " EXCLUDE_TB_FUNCTIONS
    *&      Form  build_fieldcat
    *       Fieldcatalog
    FORM BUILD_FIELDCAT .
      DATA: L_POS TYPE I.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
      X_FIELDCAT-FIELDNAME = 'VBELN'.
      X_FIELDCAT-TABNAME = 'ITAB'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-NO_ZERO    = 'X'.
      X_FIELDCAT-OUTPUTLEN = '10'.
      X_FIELDCAT-HOTSPOT = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Item'(025).
      X_FIELDCAT-FIELDNAME = 'POSNR'.
      X_FIELDCAT-TABNAME = 'ITAB'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
      X_FIELDCAT-FIELDNAME = 'DROP'.
      X_FIELDCAT-TABNAME = 'ITAB'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      X_FIELDCAT-EDIT = 'X'.
      X_FIELDCAT-DRDN_HNDL = '1'.
      X_FIELDCAT-DRDN_ALIAS = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Comissn'(025).
      X_FIELDCAT-FIELDNAME = 'COMISN'.
      X_FIELDCAT-TABNAME = 'ITAB'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '10'.
      X_FIELDCAT-EDIT = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
    ENDFORM.                    " build_fieldcat
    *&      Module  STATUS_0100  OUTPUT
    *       text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'MAIN100'.
      SET TITLEBAR 'MAIN100'.
      IF G_CUSTOM_CONTAINER IS INITIAL.
    **Initializing the grid and calling the fm to Display the O/P
        PERFORM CREATE_AND_INIT_ALV.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
    *       text
    MODULE USER_COMMAND_0100 INPUT.
      CASE SY-UCOMM.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    *&      Form  SET_DRDN_TABLE
    *       text
    FORM SET_DRDN_TABLE.
      DATA:LT_DRAL TYPE LVC_T_DRAL,
            LS_DRAL TYPE LVC_S_DRAL.
      LS_DRAL-HANDLE = '1'.
      LS_DRAL-VALUE =  'S/W Engineer'.
      LS_DRAL-INT_VALUE =  'S/W Engineer'.
      APPEND LS_DRAL TO LT_DRAL.
      LS_DRAL-HANDLE = '1'.
      LS_DRAL-VALUE =  'Manager'.
      LS_DRAL-INT_VALUE =  'Manager'.
      APPEND LS_DRAL TO LT_DRAL.
    **Setting the Drop down table for Reason Code
      CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
        EXPORTING
          IT_DROP_DOWN_ALIAS = LT_DRAL.
    ENDFORM.                               " set_drdn_table
    Regards
    vijay

  • Report for the List of Vendor for which no Purchase order has been created

    Hi ALL
    Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
    regards,

    Hi Prateksha Vaid ,
    Go to transaction S_ALR_87012093
    Select accounts with no purchases checkbox and execute
    Diwakar
    reward if useful

  • TC for the List of PO with GRR and PR

    Dear all,
    What is the TC for the List of PO with GRR ?
    How to see pending list of purchase requisitions ?
    Pl' tell related tables also for ABAP ?
    Thanks.

    Transaction code to view PO list, you can see it in ME2M,ME2L
    Transaction code to view PR list ME5A
    Full MM Transaction Codes Flow with table
    Purchase Requisition ME51N (Table - EBAN) RFQ to Vendor - ME41 (EKPO, EKKO) Raising Quotation - ME47 (EKPO, EKKP) Comparison of Price - ME49 (EKPO, EKKO) Creation of PO - ME21N (EKPO, EKKO, EKBE, EKPN, EKKN, EKPV) Goods Receipt - MIGO (MSEG) Invoice (Bill PAssing) - MIRO (BSEG) Goods Issue - MIGO (MSEG) Physical Inventory - MI01( Create doc) (ISEG)
    MI04 (Enter Count) (ISEG)
    MI07 (Post) (ISEG)
    Regardsv
    venkadesh
    reward if helpful

  • No Implementing class registered for the Interface : ES-TransportationOrderSCMExecutionRequest_In

    Dear PI Experts,
    I'm currently working on an integrated solution between TM <=> PI <=>ECC. When I trigger the Shipment creation from TM to ECC, I received an error in the SXMB_MONI of ECC.
    In the XML, I figured the error that No Implementing class registered for the Interface TransportationOrderSCMExecutionRequest_In .
    May I ask you advices on this issue? Is it a mapping error on ECC or PI Side?
    Thanks in advance for you help and advice.
    Kr,
    JP

    Hi JP,
    you can also refer the below wiki and blog
    Step-by-step FTP to ABAP Proxy - Process Integration - SCN Wiki
    ABAP Proxy Protocols: Use Cases and Examples
    regards,
    Harish

  • No implementing class registered for the interface (ABAP interface, request

    Hi,
    Proxy has been generated for the Inbound Message interface and i could see the SXMB_MONI entry in Red on the target system.
    I get the error "No implementing class registered for the interface (ABAP interface, request...."
    regards,
    Chaitanya

    Hi Chaitanya,
    Try the below configuration in SXMB_ADM,if you don't have the authorisations to SXMB_MONI ask BASIS guys to do the below activities.
    Go to SXMB_ADM.
    Execute Integration Engine
    EDIT----
    > Change Global configuration data
    select  Role of Business System as Integration Server
    Thanks,
    Amar.

  • No implementing class registered for the interface

    Hello,
    I know that I'm not the first one posting this problem, but I can't find an appropriate solution for my problem. When I execute the FlightSeatAvailabilityCheck scenario I got the following error:
    Unable to check flight availability.       
    Error Type:      XI system error
    Error Details:      No implementing class registered for the interface (type ifmmessif, name FlightSeatAvailabilityQuery_Out, namespace http://sap.com/xi/XI/Demo/Agency )
    I have to say that I accidently deleted the proxy but I have recreated and activated the concerning proxy (CO_SXIDAG_FSA_QUERY) and still get the error. I read in this thread: XI 3.0 Demo: Unable to check flight availability: XI System Error that it would help to create a RFC in sm59. Why do I have to do this although I'm using proxies?
    And does it make a difference in which client I create and activate the proxies?
    Regards
    Marc

    i tried following solution also from old messages in SDN -
    Go to SXMB_ADM.
    Execute Integration Engine
    EDIT-> Change Global configuration data
    Select the Role of Business System is Integration Server
    Again started getting error-PROXY_NOT_ALLOWED_ON_IS:
    Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
    But again  one of the messages in SDN suggests to change Global configuration data,
    EDIT-> Change Global configuration data
    Select the Role of Business System is Application system.
    it seems it's going in loop....

  • Where Is The Archive (Link) For "The List" (Weekly Suggested Compilations)

    Each week (or so), the iTunes Store has a button link to the current song compilations for certain themes. For example, this week, it is 17 college fight songs. A few weeks ago, I wanted to check out the suggested downloads for popular TV commercial songs. However, the next day I logged onto the iTunes Store, a new listing had already been made, and I am having trouble finding (a link to) the archive for "The List" (if it actually exists, and if not, one should be made). Thanks.
      Windows XP  

    can you send a screen shot? I have my archive folder.

  • How to create a matchcode for the list of Customers "Group key" KNA1-KONZS

    Hi All,
    with reference to the creation of "Group key" KNA1-KONZS for Customers,
    I'd like to know if is possible to create a matchcode for the list of Customers "Group key" created.
    Thanks
    Gandalf

    Hi
    MAINTAIN THE GROUP KEY IN GENERAL DATA ---CONTROL DATA SCREEN
    If the customer or the vendor belongs to a group, you can enter a group
    key here. The group key is freely assignable.
    If you create a matchcode using this group key, group evaluations are
    possible.
    KNA1-KONZS
    Cya
    udayakumar

  • Implementation-specific documentation for the Sun/Oracle Java SE ?

    Hi,
    Some places in the Java SE API specification call for platform-specific documentation. For example, the specification of the method await of class java.util.concurrent.locks.Condition says:
    "Implementation Considerations
    The current thread is assumed to hold the lock associated with this Condition when this method is called. It is up to the implementation to determine if this is the case and if not, how to respond. Typically, an exception will be thrown (such as IllegalMonitorStateException) and the implementation must document that fact. "
    So, implementation-specific documentation is expected to exist in addition to the API specification documentation. Sure, sentences beginning with "Typically..." suggest that that is what the Sun/Oracle reference implementation does, so the behavior of Sun/Oracle implementation can be guessed in many cases... yet sometimes troubling uncertainty remains.
    If implementation-specific documentation for the implementation exists, please let me know.
    I apologize if I chose an inappropriate forum for this question, but there seems to be no forum for discussing documentation arrangements.

    If you want to look at the implementation sepcific documentation, the best place to look is the source.
    The reason the docuementation is written generically is because they want you to write portable code, rather than rely on the specific implementation detail of the one you are using.
    Even if you don't intend to use another vendor, you might want to upgrade in the future and Java 7 or 8 many change its implementations provided it meets the specification.

  • Proxy :No implementing class registered for the interface

    <b>Hi
       I am executing an Out bound proxy from client 101.
    when i execute the proxy, i could see the following error in moni.
    error info----
    No implementing class registered for the interface (type ifmmessif, name PORequest_Out, namespace http://sap.com/xi/3A4/Purchasing/proxytoRfc)
    end of error info----
    Any tips fro the experts??
    Regards</b>chandra<b></b>

    Hi Chandra,
    You need to activate both the classes and the interfaces.
    Try to regenerate and activate once again.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/86/58cd3b11571962e10000000a11402f/frameset.htm
    Also refer the blog mentioned by earlier post.
    Hope this helps,
    regards,
    Moorthy

  • Can Users have their unique Form Settings for the List of Items (Item Search)?

    When any user add and remove columns for the List of Items (Item Search) via Form Settings, these changes are automatically updated for all SAP users.
    Is there any way we that each user have their own unique List of Items form settings?
    This is important as users for different departments will be need to see different information as they are searching for Item Master records.

    Hi Ron,
    This is not Possible.
    Form Setting of Item Master Data will apply for all Users.
    For all Users different Form Settings not Possible but you can guide your users to see while Searching Master Data.
    Hope this helps
    Regards::::
    Atul Chakraborty

  • Exit for CO02-FOR QUANTITY FIELD FOR THE LIST OF LINE ITEMS

    Hi,
    Can anyone just let me know the user exit to code the authority check for the quantity field in CO02 for the screen SAPLCOMK.
    The quantity assigned for the list of items should not be changed by the user.
    For this in which exit should i go and write the code?
    Regards,
    P.S.Chitra

    CCOWB001  Customer exit for modifying menu entries
    COIB0001  Customer Exit for As-Built Assignment Tool
    COZF0001  Change purchase req. for externally processed operation
    COZF0002  Change purchase req. for externally procured component
    PPCO0001  Application development: PP orders
    PPCO0002  Check exit for setting delete mark / deletion indicator
    PPCO0003  Check exit for order changes from sales order
    PPCO0004  Sort and processing exit: Mass processing orders
    PPCO0005  Storage location/backflushing when order is created
    PPCO0006  Enhancement to specify defaults for fields in order header
    PPCO0007  Exit when saving production order
    PPCO0008  Enhancement in the adding and changing of components
    PPCO0009  Enhancement in goods movements for prod. process order
    PPCO0010  Enhancement in make-to-order production - Unit of measure
    PPCO0012  Production Order: Display/Change Order Header Data
    PPCO0013  Change priorities of selection crit. for batch determinati
    PPCO0015  Additional check for document links from BOMs
    PPCO0016  Additional check for document links from master data
    PPCO0017  Additional check for online processing of document links
    PPCO0018  Check for changes to production order header
    PPCO0019  Checks for changes to order operations
    PPCO0021  Release Control for Automatic Batch Determination
    PPCO0022  Determination of Production Memo
    PPCO0023  Checks Changes to Order Components
    STATTEXT  Modification exit for formatting status text lines
    hi check your field where it is present
    if it header then check with the description header most probably the first must be your exit

Maybe you are looking for