Implementing Multi-Tenant Portal

Hi,
Thanks in advanced
Anyone have any Configuration Documents Related to "Multi-Tenant Portal".
Please send me on my mail id [email protected]
thanks & regards
Chittya

Hi
Refer to these links.
These links give u some idea to start with.....
All for One and One for All - New Functions for the SAP NetWeaver Portal in 2004s Part II
All for One and One for All - New Functions for the SAP NetWeaver Portal in 2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daa51a96-0b01-0010-738f-a0ecfd06104e
Regards
Bhargava
points are welcome if useful

Similar Messages

Can SCSM2012 be used as multi-tenant solution?

Hello,
I was wondering if the SCSM2012 can be used for multi-tenant purposes + monitoring of separated tenants.
Situation:
Deploying SCSM2012 to several customer sites(non-trusted domain) then providing the service from one location(1 console) to multiple (separated) customer sites. Customer will have own separated self service portal with pre configured (automated)workflows.
For the monitoring case, the information needs to be collected from the customers site(deployed agents) and displayed at our centralized site(maybe 1 big screen for all tenants )
Any ideas ?

Hello Ayman,
thank you for the quick reply. I was already afraid for this answer :(. But there could be scenarios where it is implemented already.
The requirements that are needed are complex. The deployement scenario will need to cover whole customers (complex) infrastructures. We want to deploy the SCSM2012 to manage (remote)the infrastructures.. Hereby is the monitoring also important part
of our solution. The most common incidents,changes,problems will be automated(this is not the problem), but the collection of the data from the customer site and access it on our site is the issue. So this would be implemented as on- promise solution and we
would manage (as needed) remotely.
Not sure if the solution can be like this:
Implement SCSM2012 at customer site, cache the data from CMDB into some tool that can be replicated to our site, whereby we could get the data out of this tool to use it for monitoring purpose. Then, when needed(as alert is popped up for random customer)
we could log in remotely to solve this(if its not solved automatically). This is just idea please put some "better" idea(s). Thank you

How to make multi-tenant business rules

hi'
I want to write tenant specific Business rules in multi-tenant application, please give me some tips of making multi-tenat business rule.
I know how to write common business rule for all the tenants.
thanks
Yatan

I'd suggest using Flash Media Interactive Server if you wish to make this type of application and use Flash as the interface. I can't give you the details on exactly how to implement it, but using Remote Shared Object and FMIS would serve as the basis. I believe that the package comes with examples of Shared Objects that can serve as a simple basis from which to proceed. After that you might want to see if you can find an available whiteboard app that can be leveraged to do as you wish.
I apologize in advance if using this type of solution is a non-starter, I've been using FMIS locally and have plans to eventually implement something similar to this type of drawing app as well.

Exchange 2013 Multi-tenant contact administration

Hi everybody!
Searched high and low, but couldn't find an answer.
I have deployed multi-tenancy Exchange as a service provider, and will look into self service portals later.
I'm currently developing all the powershell scripts needed to manage the multi tenant environment.
Question arrises:
How do you handle contacts in a multi-tenant environment?
Since a SMTP address can only be used once in an Exchange Organization, what if 2 tenants need the same contact?
- Use customattributes and filter on that? Than what if I want to use the multi-tenant AD for different purposes later?
- Use custom DACLs on the OU or contacts?
- Any other ideas?
Of course I started with
http://blogs.technet.com/b/exchange/archive/2013/02/20/hosting-and-multi-tenancy-guidance-for-exchange-server-2013-now-available.aspx but there's no mention of this issue.
Thank you for any input regarding this issue.
There's a new blog in town: http://msfreaks.wordpress.com

I would advise against "sharing" contacts, as each tenants requirements may be different. Meaning each may want to see different values for various attributes. You may want to stand up an ADLDS instance for each tenant which will hold their contacts independently
of your current Active Directory Forest that houses Exchange. This way, your Exchange Organization remains pristine, no never-ending queues/NDRs for ambiguous SMTP addresses, and each tenant can manage their own contacts without interfering with each
other. Also, I would look into Forefront Identity Manager (FIM).
Woody Colling, MCITP Exchange 2010 --The incentive for the experts to answer posts is to get their replies marked as helpful, or as the answer to our questions, help them help us, mark posts accordingly--

Customise Tenant Portal Sign Up Page

Hi,
Is it possible to customise the sign up tenant portal page?
When a new customer signs up ideally we would like to capture a first name, last name, address and telephone number as a minimum. We are also interested in using the telephone number to use two factor authentication to ensure we only allow sign up from a valid
telephone number. Anyone have experience of this or are there any articles out there regarding implementation as I haven't found anything.
Thanks in advance.
Microsoft Partner

The sign up wont be available trough the Azure Pack portal anymore. You need to create a separate onboarding portal / process. When a user doesn't have a local ADFS the account will be stored in the AD you configured the ADFS in on your end.
for more information i can recommend http://www.hyper-v.nu
You can try this below in a test environment to see if it will works for you:
To install ADFS on a single box:
$serviceAccountCredential = Get-Credential -Message "Enter the credential for the Federation Service Account."
$cert = Import-PfxCertificate C:\Install\yourcertificate.pfx -Exportable -Password (ConvertTo-SecureString -String "P@ssw0rd" -AsPlainText -Force) -CertStoreLocation Cert:\LocalMachine\My
Install-WindowsFeature ADFS-Federation -IncludeManagementTools
Install-AdfsFarm `
-CertificateThumbprint:$cert.Thumbprint `
-FederationServiceDisplayName:"Tenant AD Login" `
-FederationServiceName:"sts.<your-domain.fqdn>" `
-ServiceAccountCredential:$serviceAccountCredential `
Then configure ADFS for your Azure Pack on the ADFS server:
$adminportal = "admin.<your-domain.fqdn>" #WAP Admin Portal
$tenantportal = "manage.<your-domain.fqdn>" #WAP Tenant Portal
$wapsqllogin = "logon.<your-domain.fqdn>" #WAP Logon portal
Set-ADFSWebConfig –HRDCookieEnabled $false
$AzurePackTenantRelyingParty = Add-AdfsRelyingPartyTrust -Name "Azure Pack Tenant Portal"-MetadataUrl https://$tenantportal/FederationMetadata/2007-06/FederationMetadata.xml -PassThru
$AzurePackAdminRelyingParty = Add-AdfsRelyingPartyTrust -Name "Azure Pack Admin Portal"-MetadataUrl https://$adminportal/FederationMetadata/2007-06/FederationMetadata.xml -PassThru
$IssuanceAuthorizationRules = '@RuleTemplate = "AllowAllAuthzRule"
=> issue(Type = "http://schemas.microsoft.com/authorization/claims/permit", Value = "true"); '
$IssuanceTransformRules = '@RuleTemplate = "LdapClaims"
@RuleName = "AD UPN"
c:[Type == "http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname", Issuer == "AD AUTHORITY"]
=> issue(store = "Active Directory", types = ("http://schemas.xmlsoap.org/ws/2005/05/identity/claims/upn"), query = ";userPrincipalName;{0}", param = c.Value);
@RuleTemplate = "PassThroughClaims"
@RuleName = "Pass through UPN"
c:[Type == "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/upn"]
=> issue(claim = c);
@RuleTemplate = "LdapClaims"
@RuleName = "Group"
c:[Type == "http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname", Issuer == "AD AUTHORITY"]
=> issue(store = "Active Directory", types = ("http://schemas.xmlsoap.org/claims/Group"), query = ";tokenGroups(domainQualifiedName);{0}", param = c.Value);
@RuleTemplate = "PassThroughClaims"
@RuleName = "Pass through Group"
c:[Type == "http://schemas.xmlsoap.org/claims/Group"]
=> issue(claim = c);'
Set-AdfsRelyingPartyTrust -TargetName $AzurePackTenantRelyingParty.Name -IssuanceTransformRules $IssuanceTransformRules -IssuanceAuthorizationRules $IssuanceAuthorizationRules -EnableJWT $true
Set-AdfsRelyingPartyTrust -TargetName $AzurePackAdminRelyingParty.Name -IssuanceTransformRules $IssuanceTransformRules -IssuanceAuthorizationRules $IssuanceAuthorizationRules -EnableJWT $true
#this will add back the SQL login for Azure Pack trough ADFS
$AzurePackSQLLogin = Add-AdfsClaimsProviderTrust -Name "Azure Pack SQL Login" -MetadataUrl https://$wapsqllogin/FederationMetadata/2007-06/FederationMetadata.xml -PassThru
$AcceptanceTransformRules = '@RuleTemplate = "PassThroughClaims"
@RuleName = "Pass through UPN"
c:[Type == "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/upn"]
=> issue(claim = c);
@RuleTemplate = "PassThroughClaims"
@RuleName = "Pass trhough Name"
c:[Type == "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/name"]
=> issue(claim = c);
@RuleTemplate = "PassThroughClaims"
@RuleName = "Pass through Group"
c:[Type == "http://schemas.xmlsoap.org/claims/Group"]
=> issue(claim = c);'
Set-AdfsClaimsProviderTrust -TargetName $AzurePackSQLLogin.Name -AcceptanceTransformRules $AcceptanceTransformRules
Then on the Azure Pack Admin run this, again don't forget to change the URL's / SQL Servername:
$ConnectionString = 'Data Source=YOURSQLBOX;Initial Catalog=Microsoft.MgmtSvc.Config;User ID=sa;Password=P@ssw0rd'
#This will configure Tenant Portal to use ADFS
Set-MgmtSvcRelyingPartySettings -Target Tenant -MetadataEndpoint 'https://sts.<your-domain.fqdn>/FederationMetadata/2007-06/FederationMetadata.xml' -ConnectionString $ConnectionString –DisableCertificateValidation
#This will configure Admin portal to use ADFS
Set-MgmtSvcRelyingPartySettings -Target Admin -MetadataEndpoint 'https://sts.<your-domain.fqdn>/FederationMetadata/2007-06/FederationMetadata.xml' -ConnectionString $ConnectionString –DisableCertificateValidation
#below will add as extra option the (old wap) login available trough ADFS
Set-MgmtSvcIdentityProviderSettings -Target Membership -MetadataEndpoint 'https://sts.<your-domain.fqdn>/FederationMetadata/2007-06/FederationMetadata.xml' -ConnectionString $ConnectionString –DisableCertificateValidation
Best regards, Mark Scholman. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Unable to send to external email recipients - Multi Tenant Exchange 2013 - MultiRole servers in DAG

Greetings all, I hope someone can help.
I have created a Exchange 2013 multi-tenant organization, with two servers, both multi-role - CAS and Mailbox roles.
Internal mail flow is fine (external email addresses can send to the domain).
External firewall port forwards ports 443 and 25 to the Internal DAG IP address.
There are two multi-role Exchange servers that are members of the DAG.
I am able to connect to OWA and ECP via https://externalIP/OWA and https://alias.domain.com/OWA
No SSL certificates have been purchased or installed yet.
Exchange URLs have not been changed since default configuration at install.
OWA and ECP works both internal and external.
External DNS works with SPF and PTR records correctly configured
Exchange RCA - Send test only fails with one Spam Listing (this Blacklist provider now flags all domains and you cannot ask to be removed)
Send Connectors are the default ones created during install. Receive connector is standard configuration with - * -
When sending email to an external address, I receive a failure notice
ServerName.test.corp.int gave this error:
Unable to relay
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept email from certain senders, or another restriction may be preventing delivery.
More Info -
ServerName.test.corp.int
Remote Server returned '550 5.7.1 Unable to relay'
I have been troubleshooting this for many hours with no progress.
I have created new Send Connectors for the server that is advising that it is unable to relay, but they have all failed.
I have tried setting the Internal IP address for Exhange Server 1 (Exchange Server 2 reports failure), with most combinations of Security (Anonymous, Exchange Users, etc).
I have also tried with the IP range 192.168.11.0/24 to allow the whole the subnet, I still receive the unable to relay failure notice.
I have tried this guide - hxxps://glazenbakje.wordpress.com/2012/12/30/exchange-2013-how-to-configure-an-internal-relay-connector/ - with different combinations, still no resolution.
I am at a loss as to why I can't send out with the default configuration. I would assume that email would flow out without any changes, but this does not happen.
Can someone please assist before I lose my sanity.
Thanks in advance,
Terry

Greetings all, I hope someone can help.
I have created a Exchange 2013 multi-tenant organization, with two servers, both multi-role - CAS and Mailbox roles.
Internal mail flow is fine.
Incoming mail from external senders is also fine. -
external email addresses can send to the domain).
External firewall port forwards ports 443 and 25 to the Internal DAG IP address.
There are two multi-role Exchange servers that are members of the DAG.
I am able to connect to OWA and ECP via https://externalIP/OWA and https://alias.domain.com/OWA
No SSL certificates have been purchased or installed yet.
Exchange URLs have not been changed since default configuration at install.
OWA and ECP works both internal and external.
External DNS works with SPF and PTR records correctly configured
Exchange RCA - Send test only fails with one Spam Listing (this Blacklist provider now flags all domains and you cannot ask to be removed)
Receive Connectors are the default ones created during install. Send connector is standard configuration with - * -
When sending email to an external address, I receive a failure notice
ServerName.test.corp.int gave this error:
Unable to relay
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept email from certain senders, or another restriction may be preventing delivery.
More Info -
ServerName.test.corp.int
Remote Server returned '550 5.7.1 Unable to relay'
I have been troubleshooting this for several days with no progress.
I have created new Receive Connectors for the server that is advising that it is unable to relay, but they have all failed.
I have tried setting the Internal IP address for Exhange Server 1 (Exchange Server 2 reports failure), with most combinations of Security (Anonymous, Exchange Users, etc).
I have also tried with the IP range 192.168.11.0/24 to allow the whole the subnet, I still receive the unable to relay failure notice.
I have tried this guide - hxxps://glazenbakje.wordpress.com/2012/12/30/exchange-2013-how-to-configure-an-internal-relay-connector/ - with different combinations, still no resolution.
Even more info - Further troubleshooting -
I found my one of my Exchange servers had an extra NIC. I have since added a second NIC to the other server, so now both Exchange servers have dual NICs. I removed the DAG cleanly and recreated the DAG from scratch, using this link -
hxxp://careexchange.in/how-to-create-a-database-availability-group-in-exchange-2013/
The issue still exists, even with a newly created DAG. I also found that the Tenant Address Books were not 'applied'. I applied them but still no resolution
I think the issue is related to multi-tenant configuration even though the error says that it can't relay. The unable to relay message can appear when sending from a domain that the Organization does not support. Like trying to email as [email protected]
when you domain name is apple.com - But through extensive research I still can't resolve the issue.
Can someone please assist before I lose my sanity.
Thanks in advance,
Terry

How to implement multi-source XSLT mapping in 11g PS3 BPEL ?

Hi
How to implement multi-source (single destination) XSLT mapping in 11g PS3 BPEL ? Is there any good example step by step ?
thx
d

Hi d,
Also there's a sample available at samplecode.oracle.com mapper-105-multiple-sources.zip.
Regards,
Neeraj Sehgal

Can anyone explain what "multi-tenant" means with respect to OAM and OIF?

Hi,
I noticed that OAM 11gR2 has several additional authentication modules and schemes out-of-the-box for "MT" or multi-tenant. I've actually tried them, but am not clear exactly what their purpose is?
As a test, I configured the FederationMT module and FederationMTScheme to protect a test resource in OAM, and then when I access the resource, I first get a page with one field for username and a "Sign In" button. After I enter a user name, it goes to a form login page and I can log into the OIF IdP, and that's about it. I guess that I don't see what this accomplishes?
If anyone is familiar with this, please advise.
Thanks,
Jim

Hi,
Thanks for the metalink article. I've read that, and I can understand what the article is describing, but I'm not 100% clear how that relates to the configuration parameters in the FederationMTPlugin. The article talks about a mapping file, but I don't see something like that for configuring the TenantDismbiguationPlugin?
The first step in FederationMTScheme plugin is a TenantDisambiguationPlugin, which takes two parameters:
KEY_IDENTITY_STORE_REF
KEY_FEDERATED_TENANTS (a comma-separated list of "some things")
The steps/orchestration for the FederationMTPlugin has:
Initial Step: FedUserAuthenticationPlugin
TenantDisambiguationPlugin OnSuccess: FedAuthenticationPlugin OnFailure: UserIdentificationPlugin
UserIdentificationPlugin OnSuccess: UserAuthenticationPlugin OnFailure: failure
UserAuthenticationPlugin OnSuccess: success OnFailure: failure
FedAuthnRequestPlugin OnSuccess: success OnFailure: FedUserAuthentication
FedUserAuthenticationPlugin OnSuccess: success OnFailure: TenantAmbiguationPlugin
[The OnError results for all steps are failure, so I haven't shown them.]
So, the first step is the FedUserAuthenticationPlugin (AssertionProcessing), and if that fails, the next step is the TenantDisambiguationPlugin.
I guess all of my questions are around what that TenantAmbiguationPlugin does, and how it works?
I'm guessing that what you enter on the 1st webpage, which asks for a Tenant, is matched against the comma-separated list that is in the plugins "KEY_FEDERATED_TENANTS" parameter.
Is that correct?
But:
a) What happens if there is a match of what you entered vs. what's in the "KEY_FEDERATED_TENANTS" list?
b) What happens if there is NOT a match of what you entered vs. what's in the "KEY_FEDERATED_TENANTS" list?
That article you mentioned calls for a mapping file, that maps what is entered (the tenant) to a user identity store, but where is that in the TenantDisambiguationPlugin's parameters? The only other parameter for that plugin is the "KEY_IDENTITY_STORE_REF" parameter.
Having said that, I described the steps and step orchestration in the FederationMTPlugin above. If the TenantDisambiguationPlugin is suppose to somehow map what's entered to a user identity store name, then, with respect to the FederationMTPlugin, is that mapped user identity store used for the UI and UA steps (i.e., as the "KEY_IDENTITY_STORE_REF" for the UI and UA steps)?
Thanks for your help with this. Oracle's documentation certainly merits some improvement :(...
Jim

Best Practice Implementation for Enterprise Portal

hi,
I am doing Best Practice Implementation on Enterprise Portal.
In that i cant find one file. Can you please help me in finding these file "BP_RAPID_ALL.epa"
Thanks in Advance
Regards,
Raju

Hi All,
Till now no one has answered for my query.
can i know is there any replacment for this file(BP_RAPID_ALL.epa) in new version of Best Practices.
Regards,
Raju
Edited by: V R K Raju P on Feb 17, 2009 1:04 PM

How obtain Index a multi-language Portal in Google?

Hello, we are deployment a multi-language Portal.
How obtain Index a multi-language Portal in Google?
In Portal, the URL is the same for all language, allways /portal/page/portal/..... and google only dicoverer 1 language.
How obtain that google discoverer multilanguage?
We are using Portal 10.1.4.0.1
Thank.

Hi
Some useful threads
How can i create a multilingual website?
Multi Language Issues!!
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Do let me know if you have any question.

SQL pricing for Migrating an existing multi-tenant application

We have a client with an ~10 year old multi-tenant application running on a traditional dedicated hosting environment. The client is interested in migrating to Azure but only if they can benefit from PAAS features (managed backups, snapshots, scaling,
etc).
Their application automatically creates a new SQL database with each new customer signup. As such, there are 886 databases which would need to be moved. The total size on disk of all DBs together is only 3.82 GB. Only 3 DBs are more than
100 MB. 862 of the DBs are less than 10MB each (794 of those are less than 5MB).
The way I read Azure pricing, each of these 883 DBs less than 100 GB would cost $5/month. The only other alternative is to get a VM with SQL server on it -- but I can't see the advantage of that vs. the dedicated host they are already using.
Is there any other alternative to consider when contemplating an application made up of many small databases?
Thanks in advance for any advice,
Jason

Hi,
If you have existing applications or workloads you simply want to grab and move to the cloud, SQL Server in a Virtual Machine is the easiest path to realize the benefits of the cloud. If you are looking to innovate and build new relational applications running
in the cloud or extend parts of on-premises applications into the cloud, SQL Database is the best long-term solution.
In your scenario, if use azure SQL, you must pay for each database per month, refer to
http://azure.microsoft.com/en-us/pricing/details/sql-database/for more information about SQL Azure, cost too much.
About use SQL VM, I suggest you read the following article.
#http://blogs.msdn.com/b/windowsazure/archive/2013/06/04/the-top-10-things-to-know-when-running-sql-server-workloads-on-windows-azure-virtual-machines.aspx?Redirected=true
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

AD RMS for multi tenant domain environment

Hi,
I have successfully configure the AD RMS with lots of work around. now i want to use multi tenant domain environment. i have multiple domains running on my production env. Now can anyone help me out to configure the RMS Server to add multiple URLs for licensing
and certifications in AD RMS Server on windows Server 2012. i need a proper step by step configuration roles to activate on immediate basis.
Any help in this regards will be highly appreciated,
Attahcments screent shots might help you what i want ;)
Regards,
Imran Bashir
MCSA 2008, MCITP, MCTS, MCP
JNCIA ER,EX
Brocade Certified
Imran Bashir Network Administrator MCP, JNCIA-EX,ER,JNIOUS +92-333-4330176

Hi,
in a single forest you can have only one RMS SCP. You could create more RMS clusters but those are not discover-able that way, only over using RMS templates or overwriting the clients registry.
If you say multi-tenant I assume every tenant should have its own RMS key, correct? If you have only one RMS cluster the cluster admin will have control over all documents.
Hope that helps,
Lutz

Webex Node Multi-Tenant Configuration

Hi,
We are currently deploying webex node on ASR for a client, in the UC 8.x it mentions the ability to multi-tenant the node capabilityes e.g
Page 22-9
"There is also the potential to deploy the WebEx Node for ASR in a multi-tenant capacity, in which two
businesses working closely together with staff working on each other's premises could have the other's
WebEx site defined on their ASR Nodes. This means that, when staff for Enterprise B access their
company's WebEx site through Enterprise A, they can use the local ASR Node to accelerate their
meeting while saving bandwidth for Enterprise A. This feature can also benefit organizations that have
multiple WebEx sites."
This is the only reference in any guide I can find to being able to do this.
Has anyone actually done this? Is it actually possible? and if so does anyone have any documentation that they can point out that may be of use trying to deploy this type of solution.
I know it's a long shot but any help is much appreciated.

Hi A.Zarei,
Based on your description, I recommend to check if the Managed Metadata service application is associated with the web application where your My Site hose site exists.
Please double check if the service account of the My Site host site web application and the user profile service application has read permission on the Managed Metadata service application.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Move hana db from single tenant to multi tenant

Hi experts,
I have read that, for the moment, we cannot do an upgrade of a SAP system + conversion to a multi tenant Hana database in one shot. We have to deploy it on a single tenant and then move it to a multi tenant environment (where we can put a series of systems). Am I right? Right now we have a single tenant environment (A), and a multi tenant environment (B).
How can we move the database from a single tenant to a multi tenant?
- do we need to 'upgrade' the single tenant (A) to a multi tenant and then put it to our other multi tenant (B) environment? Problem here is that we then lose our single tenant environment for deploying new systems. We then need to redeploy everything, no?
- or do we just need to restore the system database to the multi tenant database?
Regards,
Kenny

Hi,
Have you changed the <sid>adm user environment variables?
You can resolve this problem using system copy procedure.
Use installation master,, export database and Instance files ..
Regards
Ben

Lync 2013 Multi-tenant Hosting Pack third-party solutions available for features listed as "Via Thirdparty"

Hi,
Who are all the third party vendors that can integrate with Lync 2013 Multi-tenant hosting pack V2 features that are supported Via 3rd party.
1) Call park
2) Outgoing DID manipulation
3) E-911
3) Dialplans & Policies
4) Support for Analog devices (e.g. FAX)
5) Response groups
6) Network QoS - DSCP
7) Phone number management
8) IM/P & Voice with Skype.
9)Inteoperability with on-premises video conferencing systems
Regards,
SR

Hi,
Base on my understanding, as it is the Mutli-Tenant environment, in internal DNS server, there is no need to add the DNS A record
lyncdiscoverinternal. However, you can try to add the DNS record in internal DNS server to test the issue as well.
Also, please make sure you have updated both Lync Server 2013 and Exchange 2013 to the latest version. If not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Implementing Multi-Tenant Portal

Similar Messages

Maybe you are looking for