Import stuck at phase XPRA_EXECUTION with return code 12,
Dear experts,
I am trying to upgrade our ERP system from SP-level 10 to SP-level 16. The main import is finished. But now I am stuck with this error:
Error in phase: XPRA+EXECUTION
Reason for error: TP_STEP_FAILURE
Return Code: 0012
Error message: OCS Package SAPKW70011, tp step R, return cpde 0012
Looking at the import logs in TRN SPAM there is the same error written for all of the following packages:
SAPKW70011, SAPKW70012, u2026, SAPKW70020
SAPK-60007INECCDIMP, SAPK60008INECCDIMP, u2026, SAPK-60016INECCDIMP
The import logs say the import was terminated at the program RDDEXECL.
Joblog of RDDECL:
Step 001 started (program RDDEXECL, variant , user DDIC
All DB buffers of application server xxxxx were synchronized
ABAP/4 processor:
Job cancelled
The long text of ABAP/4 processor only tells me a runtime error and that the short dump could not be written.
Transaction ST22 shows that there is a DDIC_TYPE_INCONSISTENCY:
Short text:
Inconsistency in the Dictionary for the structure "RSDCUBEV"
What happened?
Error in the SAP kernel.
The current ABAP "SAPLMGV_LAMA_SCR" program had to be terminated because the ABAP processor detected an internel system error.
I have implemented (if applicable) all the recommendations from Note 822379. I've adjusted modifications, however, the same error persists.
What can I do? Please advise!!
Many thanks in advance!
Thanks very much Juan, this note has indeed pointed me in the right direction, in the end I've only activated the inconsistent table RSDCUBEV in SE11 and afterwards was able to continue the queue import.
regards
Manfred
Similar Messages
-
-Support package-Test import---Ended with return code: === 8 ===(Urgent)
Dear all, using -
> SAP ECC 6.0 with IS - AFS 6.0
Environment -- Win2k3 with Orc 10.2
Kernel 700 - 75
Spam/Saint - 70026
R3trans -d <0000>
STMS is very consistent.
Met all the pre-requisites when applying Support packs & going succesfull
but
While applying
Sapk-60004inafs CRT with sapkh 60009,10,11 in
Test_import phase it is showing the following error for
sapkh 60010.
Test import
Transport request : SAPKH60010
System : MBD
tp path : tp
Version and release: 370.00.09 700
R3TRPROGJ_1IRUTZN was repaired in this system
R3TRPROGJ_1IRUTZN was repaired in this system
Test import
End date and time : 20080410100230
Ended with return code: ===> 8 <===
When im runing with 700-75 is it possoble to import latest TP
<SAR tp_145-20001354.sar TP 145 Info 3317 30.01.2008 >
in to existing kernel. plaese coment on this as i think it's a TP error.
please also advice me in different areas.
Cheers,
RahulHI thanx a lot ,
It the same procedure i did & checked your message indicating the same steps .
Yes ,standard object is repaired in system & im not aware of that
& even it is not shown that it is recorded to work bench change request when i started applying the support pack.
I did the same went to SE03 selected the object .
Selected lock overview
Identified the change request & released it.
I got one more doubt what happens when i set the object to repair flag.
Cheers ,
Rahul -
Importing error Ended with return code: === 8 ===
Hi Experts,
I am trying to transporting an infoobject 0EMPLOYEE from Dev to Production.While importing the request I am getting an error like
Execution of programs after import (XPRA)
Transport request : BD1K901543
System : BP1
tp path : tp
Version and release: 372.04.36 700
Execution of programs after import (XPRA)
End date and time : 20090206164251
Ended with return code: ===> 8 <===
after expanding this error msg i am getting
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
by clicking on the error mag
Diagnosis;
If the characteristic is used in an InfoProvider with dimensions (for example, an InfoCube or MultiProvider), the compounded unit is not unique if currency key figures are used at the same time.
System Response
This type of modeling is not supported.
Procedure
Replace the currency with a different characteristic. If you nevertheless want to use a unit in the compounding, you should use the modeling of a characteristic that semantically represents a unit. To do so, copy the technical properties of the unit of measure or the currency.
How can I solve this problem?
Can add any other char to this compounding char is it works?if yes which currency char i need to add here?
Thanks & Regards,
SridharHi Sridhar,
I am facing the problem with 0CM_CTAR and 0CM_SHAR. both the characteristics are not allowed compouding ATTRIBUTES.
0cm_ctar not allowed comp .attr of 0unit_dim
0cm_shar not allowed comp.attr 0f area_unit.
for this reason what i need to do. Please give me help on this.
sridhar could you give me solution what i need to do. i am also implement same sap note or any other solution you have.
Please kindly give me reply.
Thnaks,
Guna.
Edited by: gunasekhar raya on Apr 14, 2009 6:16 PM -
Import terminated during TBATG CONVERSION OF DD-OBJECTS with return code 12
Hi,
When we are doing an import, a particular transport fails with the error message
'Import terminated during TBATG CONVERSION OF DD-OBJECTS with return code 12
We are not able to determine, why its failing. If you guys have come across this error message, can you please let me know how you resolved it?
Thanks,
SriHi,
Pls attach error file with this.
Regards,
Payal Patel -
SAP on V6R1 - ABAP Import:Program 'Migration Monitor' exits with error code
Hello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
<br>
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
<br>
We are again getting error in following steps:
<br>
sapinst.log
<br>
<br>WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
<br>Loading of 'SAPNTAB' import package: OK
<br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
<br>
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
<br>
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
<br>
<br>import_monitor.log.
<br>****************************************************************************************************************************************************
<br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
<br>
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
<br>
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
<br>
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
<br>*************************************************************************************************************************************************
<br>SAPAPPL02.LOG
<br>**************************************************************************************************************************************************
<br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
<br>
(DB) INFO: TVV1 deleted/truncated #20091001110304
<br>
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
<br>
(DB) ERROR: DDL statement failed<br>
(ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
DbSlExecute: rc = 99<br>
(SQL error -539)<br>
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
PrasadHello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
<br>
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
<br>
We are again getting error in following steps:
<br>
sapinst.log
<br>
<br>WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
<br>Loading of 'SAPNTAB' import package: OK
<br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
<br>
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
<br>
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
<br>
<br>import_monitor.log.
<br>****************************************************************************************************************************************************
<br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
<br>
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
<br>
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
<br>
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
<br>*************************************************************************************************************************************************
<br>SAPAPPL02.LOG
<br>**************************************************************************************************************************************************
<br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
<br>
(DB) INFO: TVV1 deleted/truncated #20091001110304
<br>
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
<br>
(DB) ERROR: DDL statement failed<br>
(ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
DbSlExecute: rc = 99<br>
(SQL error -539)<br>
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
Prasad -
Error in transport, ended with return code: 12, job RDDEXECL cancelled
Hi Friends,
When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
===================================
Program terminated (job: RDDEXECL, no.: 09222300)
See job log
Execution of programs after import (XPRA)
End date and time : 20080509092238
Ended with return code: ===> 12 <===
Job log:
Date Time Message
09.05.2008 09:22:23 Job started
09.05.2008 09:22:23 Step 001 started (program RDDEXECL, variant , user ID DDIC)
09.05.2008 09:22:23 All DB buffers of application server unix0001 were synchronized
09.05.2008 09:22:25 ABAP/4 processor: UNCAUGHT_EXCEPTION
09.05.2008 09:22:25 Job cancelled
=======================================
Kindly advice.
Thanks & regards,
Kunal Patel.Hello,
I ran a search for this error and found the following notes:
SAP Note 966234 - 70SP10: DTP transport and content error
SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
Check if they are relevant for your system.
Regards,
Siddhesh -
[Error during Export] R3load exited with return code 11
Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname = "ECP20030615080638
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname = "ECP20030615080638
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno = "6120023288"
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0 -
Test call of transport control program (tp) ended with return code 0200 Message no. TK094
Hello Expert,
My SAP System environment as follow
SAP Product : SAP NetWeaver 04
Operating System : Windows 2003 32 bit
SAP Database : MS SQL 2005 32 bit
I have installed SAP NetWeaver 04 system with system copy option. I have installed Application server & Database server on different physical server. App server : SSC2PAS3SFWBW and Database Server : SSC2PAS3SFSQW1.
After SAP NetWeaver 04 installation with system copy I have done TMS configuration with virtual system for a test, It is working fine but while releasing request form SFD system (Development system) it get error “Test call of transport control program (tp) ended with return code 0200. Message no. TK094”
I have reconfigured the TMS and check but it can’t help. TR gets release and import with OS level but at SAP level it gets error.
Trans --> Log
1 ETP199 ######################################
1 ETP199X######################################
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP101 transport order : "SFDK905838"
1 ETP102 system : "SFD"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "340.16.72" "640"
1 ETP198
2EETP128 No target system defined. "SFDK905838" is not a transport request.
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP110 end date and time : "20140602150208"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Steps for Reconstruction
# Upgraded latest SAP Kernel Non-Unicode 640_Rel Patch level 404
# Reconfigured the TMS
# Full User Permission has been set to all SAP Directory.
Rgds,
AshokHi Ashish,
I have removed virtual system form TMS and configured with Development & Production system, but the same error. Not able to release TR.
SLOG as below.
ERROR SFDK905832 SFD f 0012 20140602090930 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602093923 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602094059 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602102854 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602103633 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602104142 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602111140 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602112723 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113109 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113704 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113722 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113753 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905832 SFD f 0012 20140602113809 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905834 SFD f 0012 20140602125959 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905834 SFD f 0012 20140602130035 default_user BASIS@ORIGIN SSC2PAS3SFWBW
START EXPORT PREPARATION SFD e 20140602132917 sfdadm SSC2PAS3SFWBW 20140602132916001358
START tp_getprots SFD E 20140602132917 sfdadm SSC2PAS3SFWBW 20140602132916001358
STOP tp_getprots SFD E 20140602132920 sfdadm SSC2PAS3SFWBW 20140602132916001358
STOP EXPORT PREPARATION SFD e 20140602132920 sfdadm SSC2PAS3SFWBW 20140602132916001358
ERROR SFDK905836 SFD f 0012 20140602133526 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905836 SFD f 0012 20140602133540 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602144313 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602144350 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602144430 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602150202 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140602150208 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603080634 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603081006 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603083952 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838 SFD f 0012 20140603084005 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603091608 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603091617 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905842 SFD f 0012 20140603091826 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603093805 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603101944 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603102709 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603114753 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603121948 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603122039 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603123438 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603135937 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603140114 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603140233 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603140339 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603141743 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840 SFD f 0012 20140603150924 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603152403 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603152753 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603153518 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162013 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162544 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162639 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603162755 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603163347 default_user A559420 SSC2PAS3SFWBW
ERROR SFDK905844 SFD f 0012 20140603163740 default_user A559420 SSC2PAS3SFWBW
Rgds,
Ashok -
Transport fails with return code 12 for 0CHANOTASSIGNED Characteristics
Dear Experts,
I am transporting the 0CHANOTASSIGNED characteristics from BI Dev to BI QA.
In BI Dev, I use the option Necessary Object.
While importing request into BI QA, it fails with a return code 12. Some of the errors are:
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
System error in lock management
Error AD 025 during after import handling of objects with type(s) IOBJ
Start of the after-import method RS_IOBC_AFTER_IMPORT for object type(s) IOBC (Activation Mode)
Error when checking the InfoObjectCatalog 0CHANOTASSIGNED
InfoObject 0ABCINDIC is not available in active version
InfoObject 0ABCPRC_TYP is not available in active version
InfoObject 0ABCPROCESS is not available in active version
InfoObject 0ACCT_TYPE is not available in active version
InfoObject 0ACTIONREAS is not available in active version
This goes on for lot of infoobjects. If I were to goto RSA1 of BI QA and check any of the above objects, they are 'INACTIVE'.
But they are 'ACTIVE' in BI Dev.
Please help me in resolving this issue.
Thanks and BR,
Raj JainHi I.R.K,
I recreated a trasnport for just one Infoobject (0ABCINDIC) which was one of the objects not active as shown in the logs of BI QA while transport.
I did not make any changes or delete any data etc. I then just transported these request from BI Dev to BI QA.
The transport was successful with return code 0. I then checked this object in RSD1 of BI QA and it was activated.
Any ideas what may be the cause???
Thanks,
Raj Jain -
Transport Request Ended with return code: === 12 ===
Hi
Good day to you.
We are able to move Transport Request from Development BW Client (with respect to an SEM-BCS Configuration) to Quality BW Client smoothly.
But when we move the same TR to Production client, we are getting the following error message. I would be very grateful if somebody could throw light on why it is happening, what could be its implications and what to do to avoid the same
Execution of programs after import (XPRA)
Transport request : DBWK901288
System : PBW
tp path : tp
Version and release: 340.16.37 640
Post-import methods for change/transport request: DBWK901288
on the application server: sapbwpd
Post-import method FINB_TR_AFTER_IMP_METHOD started for UCREPGROUP T, date and time: 20081029144344
Post-processing taking place in client 300
Import carried out using RFC destination PBWCLNT300
Communication error: Destination PBWCLNT300 -> long text
Errors occurred during post-handling FINB_TR_AFTER_IMP_METHOD for UCREPGROUP T
FINB_TR_AFTER_IMP_METHOD belongs to package FINB_TRANSPORT_TOOL
The errors affect the following components:
FIN-FB (Financials Basis)
Post-import method FINB_TR_AFTER_IMP_METHOD completed for UCREPGROUP T, date and time: 20081029144351
Post-import methods of change/transport request DBWK901288 completed
Start of subsequent processing ... 20081029144344
End of subsequent processing... 20081029144351
Execute reports for change/transport request: DBWK901288
on the application server: sapbwpd
There are no reports to execute
Execution of programs after import (XPRA)
End date and time : 20081029144351
Ended with return code: ===> 12 <===
Regards
SiddiqueHi Siddique,
Looks like your RFC destination is wrong. The proper syntax is FINBTR@<system>CLNT <client>.
See also the note 644610. -
Tp finished with return code: 208
Hi Basis Gurus,
I have received transport data and cofiles from system XYZ. I have copied data and cofiles in /usr/sap/trans/data and /usr/sap/trans/cofiles respectively.
Now I have change my directory to /usr/sap/trans/bin
I want to see the Object List before I import the transport request to my test system TST. I have added the transport request XYZK92????? to buffer with tp addtobuffer command and it is successful. Now when I am trying to see the Object list with command tp GETOBJLIST it is giving error message
This is tp version 340.16.12 (release 640)
System XYZ is not defined in TPPARAM
ERROR: System XYZ is not defined in TPPARAM
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
XYZ system is the system from where I got the transport request and it is not defined in my STMS domain. I guess we can import transport request from any other SAP system.
How to resolve this issue ? is any one aware of this.
Thanks
Best Regards,
CKI have created the TPPARAM with the above entry. Now getting different error:
~
This is tp version 340.16.12 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBSWPATH is no longer used.
This is R3trans version 6.13 (release 640 - 12.12.05 - 14:24:42).
1AETW065 check-sum error in datafile after "1972" bytes.
2EETW000 Please contact the SAP support.
exiting ...
R3trans finished (0016).
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
WARNS: Highest tp internal warning was: 0101
tp finished with return code: 16
meaning:
A tool used by tp broke down -
Ended with return code: === 8 === while doing transports from Dev to Test
Hi Experts,
We are doing transports from BD1 to BQ1 and getting this error message.
Could anyone please let me know why and what would be the solution for the following error message:
Execution of programs after import (XPRA)
Transport request : BD1K900065
System : BQ1
tp path : tp
Version and release: 370.00.09 700
Execution of programs after import (XPRA)
End date and time : 20070803133308
Ended with return code: ===> 8 <===
Thanks in advance.
Best Regards,
Chandu.Raymonds,
There is huge list of errors coming up. Some of them are as below:
Navigation attribute 0SALESORG is missing in characteristic 0PLANT
Navigation attribute 0SALES_DIST is missing in characteristic 0PLANT
Characteristic 0RT_LOCATIO: Referenced characteristic 0PLANT not (actively) available
Attribute 0INT_CUST from characteristic 0SALESORG not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Hierarchy characteristic 0BPARTNER of characteristic 0UCCONTRACT is not active
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Thanks in advance.
Best Regards,
Chandu. -
Repair error in transport request with return code-0008
hi!!
I am getting error while importing a transport request by giving return code-0008.
Can anyone explain me the reason and solution for the same.
Rgds,
Ajeet.Hi Ajeet,
Make sure that all the tasks whith in the request are released and they are in active state as well. Discuss with the owner of the CR and check all the objects are in active state and all the tasks are released. You can check with the logs as well to het more clues.
Regards,
Hari.
PS: Points are welcome. -
Transport with return code 12 ,short dump with 'DBIF_RSQL_SQL_ERROR'
Dear All,
My trasnport contains infoprovider. DTP,transpformations, character realtionships , aggregation levels ,web templates, programs.
I got a transport failed with Return code 12, and it is showing message :
Program terminated (job: RDDEXECL, no.: 06031600)
See job log
Execution of programs after import (XPRA)
End date and time : 20101026060421
Ended with return code: ===> 12 <===
I have short dump with 'DBIF_RSQL_SQL_ERROR' exception 'CX_SY_OPEN_SQL_DB'.
in how to correct the error :
below is the detials.
Database error text........: "ORA-01578: ORACLE data block corrupted (file #
211, block # 79950)#ORA-01110: data file 211:
'/oracle/RBW/sapdata15/xbw_188/xbw.data188'#ORA-26040: Data block was loaded
using the NOLOGGING option"
did someone has the same problem .
Help is really appreciated.
Regards
VeeraI am afraid you will need to esclate this to BASIS team.. seems some issue with database
-
Error in transport, job RDDEXECL cancelled, ended with return code: 12
Hi all,
When I am trying to import a request in a BW system from development to quality , it is giving below error:
Program Terminated (job:RDDEXCEL no:11315700) messg no:TR012
Please do needful
Thanks and Regards,
srinivas.mHi Gurus,
I have the same error "Error in transport, job RDDEXECL cancelled, ended with return code: 12" (Programa cancelado (job RDDEXECL, nº 09292900)).
I have checked all the steps that are in the "Note 1101187 - The OLAP tunnel" and they are implemented.
Find below the information about my BW system:
SAP_ABA 700 0024 SAPKA70024 Componente multiaplicaciones
SAP_BASIS 700 0024 SAPKB70024 Sistema Base SAP
PI_BASIS 2005_1_700 0024 SAPKIPYJ7O PI_BASIS 2005_1_700
ST-PI 2008_1_700 0004 SAPKITLRD4 SAP Solution Tools Plug-In
SAP_BW 700 0026 SAPKW70026 SAP NetWeaver BI 7.0
BI_CONT 703 0016 SAPKIBIIQ6 Business Intelligence Content
ST-A/PI 01N_700BCO 0000 - Servicetools for other App./Netweaver 04
I am trying to transport "Business Content (Statistics)", if this information can help you.
What can i do to solve the problem? I am finding some clue and i dont find anything. It will be much appreciated any idea to solve the problem.
Thanks in advance and kind Regards,
Manuel
Edited by: Manuel Guijarro on Oct 11, 2011 3:46 PM
Maybe you are looking for
-
Sales condition in customer master data
Hi, We need to show in the customer master the the price conditions of the customer. This prices conditions depends on the material and on the customer type but basically we need to show the standar discount the customer has on each material class. F
-
AudioClip, one wav works.. another doesn't?
I'm trying to use the AudioClip class.. and the example I copied over works fine (see code below) but when I change the sound file it stops working. Tried wrapping it in a try and catch and printing any error.. but it seems there is no error as it is
-
what does the box and arrow up icon do ? and how to remove it ?
-
No response from printer when printing a specific file from Photoshop CS6
I am printing from Photoshop to an Epson 3880 printer. I have a specific batch of files from a client that cause the print dialogue to immediately quit when requesting a print job, therefore never sending the information to the printer. With other fi
-
Terminal error - what is a redirection error?
When I launch Terminal I get the following error: -bash: redirection error: cannot duplicate fd: Too many open files I can't find any info on this, any help appreciated.