Important file modification for Cornerstone users

After having problems with HTML5 files not loading in Internet Explorer in Cornerstone, I asked Cornerstone to look at one of my HTML5 published zip files. The issue I was having with this particular file was that the course wouldn't load in Internet Explorer but would load in any other browser. They found that there was an error message with the DoFinish command.
I did some digging and found that since the file SCORM_utilities.js wasn't being referenced in the index_SCORM.html file that Cornerstone wasn't loading the SCORM_utilities.js file at all. I added the line <script type='text/javascript' src="SCORM_utilities.js"></script> in the header section of my index_SCORM.html file and was able to open the file correctly in Cornerstone. I also found that having this in my index file also fixed other problems I was having in Cornerstone with swf published files not working correctly, such as the close/exit button of the playbar being non-functional.
You can modify the default html files and add the line to them so that every time you publish a file the fill will always be referenced. The following directories are where the html files are located.
FOR HTML5
<install path>\Adobe Captivate 8 (64 Bit)\Adobe Captivate 8 x64\HTML
FOR SWF SCORM 1.2
<install path>\Adobe Captivate 8 (64 Bit)\Adobe Captivate 8 x64\Templates\Publish\LMS\Standard\SCORM\Default\1_2
FOR SWF SCORM 2004
<install path>\Adobe Captivate 8 (64 Bit)\Adobe Captivate 8 x64\Templates\Publish\LMS\Standard\SCORM\Default\2004

Thanks everyone for your replies.
phrakture, I have included a patch file also. It's in the archive but you can download it directly:
http://www.iogopro.co.uk/contrib/pacman … earch.diff
Here is how to try it out (assuming the diff and pacman source archive is in the CWD):
$ tar xvzf pacman-2.9.5.tar.gz
$ cd pacman-2.9.5
$ patch -p1 -i ../pacman_and_search.diff
$ ./configure
$ make
$ ./pacman -Ss 3d game
Pink Chick, for that I would have to write a mini parser and interpreter. It's a bit beyond the scope of what I was aiming for ;-) Most of the time I don't imagine needing the full power of arbitrary expressions. It would probably be possible to add support for NOT e.g. 3d !game without too much trouble, I'll look into it.
stonecrest, I could add another command line flag. Any suggestions? Personally I wouldn't mind it replacing the default behaviour, but I'm biased :-)
I will file this as a feature request in the bug tracker as suggested.

Similar Messages

Changing default open with for file type for all users

hello
can I change the default app to open a specific file type for all users and not juist for my user?
i am admin for my mac mini.
tnx
gil

What applications are offered for open with depends on the application itself informing the system it can open certain files, plus your own custom selections for opening files. Evidently the alternate app you want to use does not claim to be able to open the files you are assigning it. If you have a plist editor and know how to use it you could edit the info.plist file inside the application itself to add the file type you want to the application's declaration of file types it will open. Then restart so the system will read that declaration. I think it would be far easier to simply launch the application and then drop a file you want it to open onto its icon in the Dock.
Francine
Francine
Schwieder

File Associations for all users

How does one go about changing file associations for file types for all users? I've recently installed iWork '08 on a computer on the network and now when I log in as a user it wants to open all of my Excel and Word Documents in Numbers and Pages respectively. How can I get it to default back to Microsoft Office for all of my Microsoft Office documents for all users. The iWork '08 install seemed to just take over, so it must be possible.
Thanks!
Chad

I too need this information, but seeing it's been over a year and no one replied to the thread starter.....

Default WorkBook file extension for all users of BEx 7 in Offce 2007

Hi Experts
We recently started using office 2007 with BEx 7.
However, many users still has Office 2003 installed.
I am looking to set the default file extension for all users to be .XLS.
I know that this option is available in Client level (Global Settings - Use XLS file format ) but I require that the checkbox will be automatically checked.
Is there a way to do it?
Thanks,
Yaniv

Hello Yaniv,
Yes, you can maintan them globally.
this can be done in registry under :   HKEY_CURRENT_USER\Software\SAP\BEx\Analyzer.
   UseXLSFileFormat
   Type: String Value
   Value true or false
For more information refer to SAP Note 1254112
Regards,
Arvind

MP3: How large can import file be for 4 GB Nano?

I am having trouble importing one particular MP3 file, 74,000 kb, into my my 4GB, which is only filled to 1.3 GB. Is the file too big? It's an audio book.

The thread title "How large can import file be for 4 GB Nano?" is something of a give-away, no?

How to limit file access for different users in 10.7.4 Server

We had everything working perfectly with an earlier version of Lion Server. The update to 10.7.3, or 4, seems to have opened access to all files for all users. Much to our surprise, this wide-open access started without warning.
- We have an external drive that contains all of the company's archives
- We had set access for one employee to get to the files he needs, and different access for another employee. Neither saw sharepoints outside of their access settings.
After an update, each employee can see and log in to all sharepoints. There doesn't seem to be a way to limit access for each employee now. I can set 'read' access for one employee, but it doesn't stop the other employee from accessing that sharepoint/folder.
Is there some new way to go about this? Or is something simply broken with the current release?

That is good to know. If the file share is seeing the drive and ignoring its permissions, that is why everyone can see everything. I have found, in Lion Server, that it is best to get the permissions set before turning on File Sharing. I don't know if you have the luxury of turning the file share off for a little while, but I would unshare the drive and see if the issue persists if you plug the external drive into another machine. The settings for permissions are set on the file or folder itself, so the issue should follow you to the other machine.
Again, if you can, I would unshare the drive and reshare it with the permissions that you want and turn file sharing back on. However, if you can get the drive to respect permissions rather than ignoring them, I think it will save you a lot of work.

Need to deny access to file manager for the user

Hi
I need to be able to deny access to the file manager, as I dont want my client deleting files. however, for some reason I have to allow him access to this as he needs to be able to upload files through InContext Editor (he needs to link pages to documents that are not on the server so he needs to upload them and to do this, I have to grant him access to file manager). How can I get around this? I dont want to have to reupload his site every time he deletes a file....

Unfortunately it can't be done - access to the file manager allows deleting as well as uploading and at this point that cannot be changed.

Import -File(Subtemplate) for an I.P. Location

hy people! i have one issue that i cant solve
when i want import a file that contains a subtemplate and the subtemplate is in local machine i dont have problems: i do: <?import:file:///C:\Xml\dir\header.rtf?>
in this case the folder of templates are in a server! i try to do <?import:file:///\\192.168.10.5\Xml\dir\header.rtf?> or <?import:file:///192.168.10.5\Xml\dir\header.rtf?> but it doesnt work.
Someone know if exits another way or syntax to put this work? i apreciate a lot.Tks
In this case the folder are in E:\JDEDWARDS\E812\XML AND THE SERVER ARE 192.168.10.5. This Folder are shared to the network
Edited by: user5877544 on 13/Mai/2009 4:43

Hi,
I tried using "http", but when i tried to connect to the report from ADF layer, i always get PermGen Space error during the execution of runReport. Any inputs to solve this issue?
Thanks,
Pavithra

File Discrepancies for Multi Users

Hi ...
We are running RH7 and RSC3.1 with 3 users - We identified
(only yesterday) that after User 1 had deleted one topic file from
Project Manager and added several others ... User 2 and 3 had
broken links for these topics.
We are able to update existing topics by one user, who check
in, then user 2 and 3 can get the latest version and instantly view
the changes - lovely!! Exactly what we would expect ...
But the same is not occurring when we remove or add entire
topics to both the Project Manager and the TOC ...
User 2 and 3 see the topics in the TOC with the dreaded red
cross through them ... and have to try and locate the file or
restore broken links etc ... to get their view of the project in
sync with User 1. This seems to defeat the whole purpose of being
able to have a multi user authoring environment????
A major concern of this problem appears to be the risk of
undoing each others work by potentially restoring files that
another user intended to remove ...
Is anyone else experiencing similar issues ... we are in a
big organisation and are very restricted in terms of our ability to
access the servers etc ... but I want to know if there is something
we should be checking or doing differently from an application
perspective? Any advice or ideas are greatly appreciated...
Many thanks ...
Frustrated!

Hi Fi@qldpol, and welcome to the board. With your situation,
there are two likely possibilities:
1. Was your project added to source control via RoboHelp, or
was it initially added using RoboSource Control? If it was added
from RoboSource Control, then that is the problem.
2. If #1 is not the problem, then you might be having
problems with some of the users' CPD files. First, have everyone
make backups of the local version of their project (the files
actually residing on their PCs). Then have User 2 and User 3 delete
their copy of the project, and replace it with a copy of User 1's
local files. Before they open the project, they should delete the
cpd and pss files. After they delete those files, they can open the
project as usual and let the cpd file rebuild. We have to do this
every so often with some of our projects to get everyone
synchronized.
Hope that helps.
G

SQL Loader and control file changes for different users

In the front end of my application I can select a data file and a control file, and load data to the table mentioned in .ctl file. Every user who logs in uses the same .ctl file and so loads onto the same table. Now I want the user to load data onto the table in his own schema. I can get the username of the user currently logged in and i want to insert it into that username.table. So can i copy the contents of the .ctl file into a variable, modify it into username.table in that string and pass that variable as a parameter to the sqlldr command instead of the .ctl file.
Or is there a better way how I can modify the same control file everytime to change tablename to username.tablename in .ctl file and pass to sqlldr to load data to table in local user schema table.
Thanks and Regards

Thanks for the reply .. user do have their user credentials but only for the application ... but all users use a common loader and control file once they log into the application. So irrespective of which user is logged in he selects the same control file and loads to the same table mentioned in the control file .. i instead want user to be able to load to the table in control file but into his schema like username.tablename instead of just the tablename mentioned in .ctl file.

File accessability for multiple users

I am designing a we application in which each and every updation done by the users will be written in a text file. I have a question that since this is a web based application there will be multiple users accessing the application. And when many users are trying to update a record then they will be accessing the same file.i.e., writing into the same file at the same time and that will be a problem... Please suggest me a solution for this issue.... Some people suggested to use synchronized methods for writing and some suggested like writing into a temporary file and then once the user has finished updating we have to write from the temporary file to the main text file. So the main file is not directly updated by the users..
Please suggest me if you have any new ideas...Thanks in advance..

Hi Thanks for your explanation...Since I am new to this field i have a doubt. Could you please explain it.
Question:
Will Session affect this logic?
Consider a user A is performing the update action at location 1 and a user B is performing another update action at location 2. My doubt here is will both the updated records will be present in the same Vector even if the users closes the session? Because what if the user closes the application before the "WorkerThread" runs method "performNextUpdate()". And also will the thread start running from the moment the user logs into the application for every 25ms.
Sorry if it is a silly question or if you dont understand it properly.

Can't Enable File Sharing for Guest Users on Time Capsule

Hey all,
My roommate has a time capsule that is capable of using a guest network, which my other roommate and I use to connect to the Internet. I have a Mac Mini, Mac Pro, iPhone, iPad, all of which cannot currently communicate with each other due to being on the "guest network."
I have seen instructions for enabling the "allow guest users to communicate with each other" option, but have loaded the roommate's Airport Utility and it does not have that option. He's running OS X 10.7 and has Airport Utility 6.1. There are options to configure the guest network, but nothing about enabling sharing between computers on the guest network.
See:
http://news.goldenweb.it/article.php?l=en&id=27203&group_dir=comp&grouplist=comp .sys.mac&group=comp.sys.mac.comm
This article seems to suggest the option is not even available anymore, which seems very odd to me. Any ideas? Thank you for your help!

AirPort Utility 5.6 for Mac OS X Lion

Maximum import file size for stills?

I am getting an error importing stills that are large, about 6000 pixels wide. I wanted to zoom into the image in my 1920x1200 video... Couldn't find info on max image size... anyone know?
thanks...

Studio3D,
I do a fair amount of work with stills in Premiere. I always plan the size necessary for the pans and re-size to exactly what is required, based on the Project's image dimensions. As I do not do any "random pans and zooms," (each is choreographed tightly) I do all of the re-sizing work in PS, before Import. However, with your hi-rez Project, you might well be pushing the limiting size in Premiere. You may have to step back, just a little, and tighten your pans to accommodate these limits.
Good luck,
Hunt
PS I like the re-sizing algorithms in PS better than any I have worked with in PrP. Have not experimented with CS4, so I might change my tune, should they have changed their algorithms.

JAR file tip for winXP users

AAAAGH!
I've just discovered why my JAR file is SO big. Stupid winXP generates a hidden file called Thumbs.db in directories containing images if you browse them in the file explorer. If you add this directory to your JAR file it will include this file. This added 3MB to my JAR - removing it the JAR is under 2MB!
Tip - check the output when you create a jar file!

Yeah, this is truly irritating. Thumbs.db is a thumbnail cache and it's the price you pay to have the Fisher Price GUI Windoze XP is so well known for. You may notice if you chage these images all the time that the cache images don't match the actual images.
The best solution? Stop the damn thing altogether. To stop it do this:
Go to run and start regedit.exe then go to the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced
Double-click DisableThumbnailCache value and change the value to 1 and press ok and close the registry editor then restart ur machine.

How to set up file sharing for outside users

Hi can anyone help me,
I am pretty new with this.
I want to share files outside of my netwerk with my osx lion server.
I tried ftp but when i log in it says permission denied login failed code 530.
Can anyone help me how to share my files proper or get my ftp to work ?

Hi
http://manuals.info.apple.com/en_US/FileServerAdmin_v10.6.pdf
Bottom of page 40 and continue onto page 41.
HTH?
Tony

Important file modification for Cornerstone users

Similar Messages

Maybe you are looking for