Importing 16:9 into FCP and then exporting it

I have currently got alot of 4:3 video files that i am editing for web use. The flash player that I have on my website is 16:9 widescreen.
Do I have to convert the 4:3 before i import and edit? or can I edit in 4:3 and then export in 16:9 widescreen and which way will keep the best quality?
Either way what settings should i have in FCP
Many thanks in advance
Nobby Clark

If you use distort and scale it will wreak havoc with the quality.
You are in Oz so you are working in PAL with 4:3 video clips that have pixel dimensions of 720x576, right? What are the dimensions of your Flash player's window?
Edit the clips in a 4:3 FCP Timeline. Use a superimposed letterbox mask to help you reframe the image below it vertically. Take the result to Compressor, crop the mask off and generate your Flash files.

Similar Messages

  • Subtitle workflow. Is it possible to import srt files into premiere and then export to Encore?

    Hi, I'm editing a series of short documentaries that wil be published in DVD with subtitles, and I'm wondering if there's any way to import srt files into Premiere and then export the project to Encore.

    You can easily (and better, IMHO) do what you want in Adobe Prelude.  It's part of the CC subscription, and may have been included with CS6.
    Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips.  Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting.  Don't select the Transcode option.
    Cheers,
    Jeff

  • What is the best workflow procedure for importing DV SP 16x9 footage into FCP7 and then exporting the best quality 16x9 to standard DVD so that it looks great (or at least good) on a 50" Samsung LCD TV ?????? Please help! anybody?? Thanks!

    We are using a Sony HDV-Z7U camera for acquisition. We recently recorded an event using the camera's non HD capabilities. We set the camera to record "DV SP" 16x9 settings on both Mini-DV tape and CF card.
    To import the DV SP footage into FCP7 we chose the "DV NTSC anamorphic" setting in the log and transfer settings window. After a successful transfer from the CF card (the CF card held approximately 83 minutes) we checked the size of the file and found it to be 16 Gigs! Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
    We need to burn DVDs of this show - we sent it to compressor and got horrible quality.
    What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def. footage and what is the best method for exporting for outputting this footage to DVD that preserves the original quality of the DV SP footage?? Anyone? Many thanks

    > Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
    No it doesn't. DV is 13GB per hour.
    In any case, a Video DVD uses the MPEG 2 codec, not DV.
    >What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def.
    DV NTSC anamorphic.
    >what is the best method for exporting for outputting this footage to DVD...
    Use the Compressor DVD preset "Best Quality 90 mins".
    >...that preserves the original quality of the DV SP footage?
    Not going to happen, you are compressing by a factor of 1:4. Shooting as HDV would have given you better quality material to start with. DV is at the bottom end of the scale.

  • Problem importing Motion project into FCP (images 'wobbly' and 'jaggedy')

    I'm at wit's end here. I did a short 10 second intro for a press reel in Motion that is pretty basic and looks good in Motion (it's just images from the show flying across the screen, with a cloud emitter as background). The problem is that when I import it into Final Cut Pro, the images get all jittery and wobbly. It looks as if they are going in and out of different interlacing stages, which makes no sense.
    The images were taken from the theater's website, and I have have tried them both in JPG and PSD formats. They are all being scaled down from the original size a touch after I import them into Motion (would that be the problem? Didn't think to try that...). As I said, they look fine and clear in Motion, but when I export into a Quicktime movie or render it and play it back in Final Cut Pro, they get all jaggedy/wobbly (for lack of a better technical term). Stills exported from the Motion file look fantastic in Photoshop (and in Final Cut Pro when I use them as background) but a paused image in Final Cut Pro looks very jagged.
    I've tried everything I can think of, and even upped all the render settings in the project, to no avail. Any ideas/suggestions?

    Sure. I'm uploading two files. One at www.jonathanfrank.com/FCPTest.mov, contains two 10 second movies back to back. The first clip is the project I created from scratch, the second clip is a test I did using a Motion template that I was 'inspired' by. Both were exported from Motion w/Field set to 'none' and export settings set to 'animation' Both looked pretty good when the exported file was opened in Quicktime. I imported the files and rendered them in FCP (and noticed that Field got set to Low/Even along the way somehow) and then exported them into Quicktime via FCP.
    I also am uploading the original file of my project that I exported from Motion to see the difference at www.jonathanfrank.com/poetintro1.mov
    Due to the size, it's not as easy to see the 'jitter' It was really noticeable when I imported the Travel template sans photos (so you just saw the grey "replace here" images with the circles and grids). It looks passable in the movies, but when Printed to Video, played in FCP (or played in the full-sized format in Quicktime) it's a lot more obvious what I'm talking about.
    Basically, the motion just isn't smooth. It's very jagged and jittery, and the definition is dreadful.
    Thanks for all your help and interest, by the way. And hope this

  • If I actually import full files into FCP, can I then drop source files into the trash?

    If I actually import full files into FCP, can I then drop source files into the trash?   I'm editing now and want to free up HD space.

    Just to confirm: in Preferences, Import, Files..."copy to library storage location" is selected.
    So I assume I can dispose of source files.
    Thanks for quick reply and also the the cautionary note. 
    This is low-level family footage I export to .mov and share on YouTube, so originals are not critical.

  • How can I sort photos into albums on my iPad and then export them to my iMac?

    I want to import photos from my camera card into my iPad, sort them into various albums then export the albums to my iMac. I have 12 albums in Photos with around 300 photos on my iPad, but when I connect it to my iMac iPhoto tries to import all of the 1800 photos without the album structure. How do I transfer the albums and the 300 photos in them to my iMac?

    Yes, but the recipient may not be getting the full image file that was used to make the Shared Photo Stream. You would have to run a test to see if there's any reduction in the image and file size. The following is from iCloud: Photo Stream FAQ
    What resolution are the photos in shared photo streams?
    Shared Photo Streams deliver photos in a device-optimized resolution that speeds upload and downloads and saves storage space. While actual dimensions will vary, an optimized version of a photo taken by a standard point-and-shoot camera will have a 2048 x 1536 pixel resolution. Panoramic photos can be up to 5400 pixels wide.
    OT

  • Can FCE HD 3.5 Import HD-AVI with MJPEG file and then export?

    I am having some old 8mm film converted to HD-AVI: MJPEG in the wrapper. Will I be able to import this entire file (about 20 minutes of 1080 video) into FCE HD 3.5, make simple edits (mostly dissolves), add some background music and then export the file to a standard DVD at 640x480 and also to Blu-Ray (using Toast 9's ability to write BD files to regular or dual layer DVD disks with no loss of resolution?
    Is Motion JPEG within the HD-AVI wrapper part of HDV codec? I am clueless about the zillions of formats I see all over (but FCE HD 3.5 mentions only DV and HDV and Apple Intermediare codec 1080i60 or 720p60.
    MartyP

    Hi Tom,
    Does that mean I cannot import the HD-AVI wrapper and Motion JPEG file directly into FCE HD 3.5?
    The file is on a hard drive - not captured thru a FireWire Port.
    MartyP

  • Whenever I try to upload photos into iPhoto, they load but when importing it just stops a picyure or two into it and then just sits there. I can't stop the import so I have to shut off my camera when it is importing and start again. Help?

    Whenever I try to upload photos into iPhoto, they load but when importing it just stops a picture or two into it and then just sits there. I can't stop the import so I have to shut off my camera when it is importing and start again. Does anyone know how to fix this?

    As a test  launch iPhoto with the Option key held down and create a new, test library.  Tru importing from your camera to it and to see if the same problem persists. Does it?
    OT

  • Jumpy playback from image sequences rendered in Apple Prores and then exported to h264

    I will start by saying I have been using FCP since 1.0 and am in no way new to this software, but this issue has me going crazy.
    First the Specs:
    MacPro 2 x 2.66 Quad cor Intel Xeon
    16 gig Ram
    OS 10.9.2
    FCP 7.0.3 (sorry but I am not a fan of FCP10 at all)
    In other words, a beast of a system that has played back everything I have ever built on it for years until now. So now for the issue: I work with an amazing 3D Max builder and we have created a building animation exported from that program into and image sequence ( we have tried JPG, TGA and PNG still all with the same effect). I open Quicktime 7 Pro, build the image sequence, save as .mov, import into FCP and drop it into my 1080p30 Apple Prores (HQ ... we also tried SQ) timelines. The timeline renders perfectly and I can play the video perfectly through my system out of Firewire 800 to my Motu V4HD device which then converts the signal to HDMI to my 55" LED TV. The video and playback is perfect.... until:
    If I try to play back the same exact time line into an exported video file, the file will play back with random jumpyness in it. I say random since you can play it back 10 times and it will hiccup during playback at different spots in the video. If you review every frame in the file though using Quicktime 10, 7 or VLC viewer, every frame is perfect. So, it must be the data rate right? Wrong. I have exported now to H264 MP4, M4V, MOV , ect, etc at different data rates from 4mb to 40 mb per second. They all have the same randow jumpyness to it. So it must be my computer right? Nope. I have a Macbook pro that is more powerful than this machine and I rebuild the file using the same method (something I have done a thousand times before) and the exported file does the same thing on that machine. I had my friend do it on his machine... same thing. ERRRR....
    We have even tried using After Effects and Premier to the same result. Rendered it straight from Quicktime Pro, same. Rendered it to 720p30, same. Render it to 24fps, same. I had another editor render it using whatever methods he wanted to use... same. Tried Compressor, SAME.  Tried Adobe Media Encoder, SAME......We even, god forbid, used a PC running Premier and built the image sequence and rendered to h264 at 30fps, 5mbs.... @#$@#$ SAME!
    We just remade the 3D Studio Max export into a 60fps animation since I thought that the individual frames we appearing too far apart and thus causing the jumpyness. That was causing the playback of the upclose objects flying across the screen fast to appear jittery, but not the random playback jumps. The 60fps did smooth out the animation greatly during fast flybys, but the playback jumps are still there in all players, QT, VLC, the web, etc.
    I was starting to think this issue is realted to Mavericks, but since the PC did the same thing that is not it either. I have linked a sample of the clip below exported to 720p30, 25mbs... something that is much smaller than the original and should playback smooth very easily on any of my systems.
    FYI: I have now opened numerous projects I have edited over the last few years and noticed that all of them are now jumpy, so this isn't just an image sequence issue. While the other projects don't use image sequences and instead are shot footage edited together, there is still the random jump (far less than the image sequence as you will see) but they are now there... ***? I have cleared preferences in FCP which helps for a short period of time, but once exported I get the same glitch.
    As I said... I am stumped... ANYONE have ideas for me to try?
    Here is a sample file for you all to see and please tell me if anyone does not see the issue after playing it several times in a row.
    www.media3lv.com/switch/NORTH-sample-720p30_25mb-sec.zip
    One last thing to note... my main goal for these videos is YouTube or Vimeo playback via our company website. I have a few other animations online right now using YouTube and the problem is also showing there. At first I thought it was just my videos, but I have looked at numerous YouTube videos now showing 3D animation and alot of them are jumpy.
    www.supernap.com/supernap-building-design.html
    www.supernap.com/supernap-tscif-exchange.html
    These don't show the issue as bad since the camera fly is much slower, but why is this occuring and is it coming from my source, or is this a known youtube issue? I can program this using out own modules, but YouTube and Vimeo allow for multiple resolutions and a checker script which makes it easier to share over all devices at all quality up to 1080p.
    Advice is welcome and appreciated?

    I have tried at actual, full screen, using 1080p30 size from the original compressed to 4mbs (something my system can handle without blinking), 720p30, etc. etc. etc.  Nothing stops the jumps. Even the activity monitor shows only 5%-15% processing being used by QT and/or FCP.
    I plan to pull my old G5 out of the closet, it runs 10.6.8 and is still rock solid for video editing in FCP7.  If it plays smooth on that 8 year old system then I know it's Mavericks. I'll try that tonight. It floors me though why the original 1080p30 will playback perfect via FCP and Motu, but once I turn of external monitoring and just try to play it via the preview monitor it is jumpy as **** and then the exported file does the same thing.  So strange.  I even deleted prefences of FCP and that does help with screen playback initially, but it always gets jumps in it after playing for a while.
    I knew I should not have started using Mavericks and I HATE FCP10.

  • How to import Powerpoint movie into FCP

    I have a powerpoint slideshow from a client and am needing to import it into FCP. In PPT I saved it as "Make Movie", and sought to import as .mov into FCP. When i try to open it, I get error , message, "Out of Memory." I have 27 GB of memory on the main drive, and the file is only 49MB. Any help would be appreciated.

    First find a sharp object, then look for the soft spot on the inside of your wrist...
    or if you must,
    Export each slide as a still file and rework them in Motion. You probably need to set them on a background because NO ONE EVER build powerpoint for text safe in video.
    TonyTony

  • Best format for importing scanned photos into FCP in HDV?

    Hi,
    I'm importing a lot of scanned photos into FCP, for an HDV project. I will be zooming into these images, panning, and so on.
    What is the consensus on the best format to use? I was thinking TIFF but then reading about PNG I am thinking this is perhaps better.
    I am dealing with large (up to 1200 dpi) image files, so size is an issue.
    Many thanks for your thoughts.

    Right, use a PSD with photos on different layers, Import the one document into FCP, each photo is on a different layer in FCP and you can zoom in as you wish by using key frames, once you set all your photos (Layers) the way you want all the same or different etc... you copy and paste them into the time line. I do this all the time and add transitions or effects. works well even with company logos off of a web site. You can zoom in all you want. dude
    from a link you provided
    PSD
    Increasingly then image editability is becoming important. The obvious way of maintaining maximum information and maximum editability is to stick with the native application-specific format. Of course it was to avoid this go-it-alone anarchy that file format standards had to be developed in the first place, but the situation with bitmap images is quite special. Currently the vast majority of designers are working on their images in Photoshop and then exporting them to TIFF to use in their DTP application. Why not just cut out the middleman and support the industry standard Photoshop’s PSD format directly?
    After all the format is well known. The core format PSD 3.0 format is built on a short header specifying the image size and colour channels and then three information sections called the Colour Mode Data Block, Image Resources Block and Layer and Mask Information Block defining features such as duotone settings, channels and paths and layer opacity and blend mode respectively. After that comes the image data. Naturally the PSD format can support all the advanced features we’ve already looked at such as duotones, clipping paths and channels but it also offers one feature that no other file format does. While every other format must be flattened on export, PSD is the only format that supports layers. Any program that supports PSDs directly can then leverage this layer information as Adobe ImageReady and Deneba Canvas show. Currently the DTP support is fairly basic but the possibility of changing image blend modes or editing layer text or tweaking adjustment layers depending on the actual spread in which the image appears is creatively mouthwatering.

  • Trouble importing .mov files into FCP X

    I'm relatively new to FCP so this could be a really easy fix. I took a bunch of short video clips (20s --> 1.5 min) on my Panasonic ZS25 and imported the clips to my MacBook Pro (2008 with 2GB 1067 MHz DDR3 Memory and 2.26 GHz Intel Core 2 Duo Processor). [I have version 10.8.4 of OSX]. The clips from my camera were in .mts format so I used the Smart Convertor Pro App from the App Store to convert all 80 files to a .mov format. Both the converted clips and FCP X are stored on my 700 GB external, and while I tried to import the clips into FCP X, the program almost immediately froze and shut down. Thinking I "overloaded" (for lack of a better word) FCP X, I decided to try and delete the blank clips that were showing up in the program. However each time I attempted to click on a clip the program crashed again. I eventually was able to delete all the clips, and decided to move the converted clips from my external to my desktop. Once they were moved I then tried to import just one clip from the desktop to FCP X (which is still run through my external). Although it was successfully imported, once I clicked on the file to play it in FCP X the program crashed again.
    What can possibly be the problem and what can I do to fix it?
    Note: This is my first time using both my new camera (and having to deal with this .mts BS) as well as FCP X.

    Thanks Russ, Tom, and Hughmass for all your input. It really is appreciated. Unfortunatly even after moving FCPX to my desktop and converting the .mov files in MPEGstreamclip, importing the movie clips into the program still causes random shut downs. Perhaps the clips are corrupted or something? I honestly don't know, and I'd rather kind of just ignore this problem then keep hashing away seeing as the clips aren't that important (and yes, being super smart, i deleted them off the camera well before hand).
    Just to make sure FCPX works, I took some short clips on my Panasonic DMCZS25, and imported them successfully into FCPX and was able to edit together a quick piece. Thanks again for all your help!

  • How to Import Shake scripts into FCP?

    Hello,
    There may be info here on the Forum, but I wanted to ask this anyway: I've made a Shake script and a File Out Node and rendered that, but when I go to FCP I can't import, or Open that file. I did make it a Quicktime file, but I'm sure that I'm missing something. Could someone tell me how to import Shake comps into FCP? Thanks!

    I guess I'm not sure what you mean, then - You can't render to a "script" file.
    What format was was the QuickTime file you produced with your File Out node? Are you trying to do something with an Alpha Channel? If so, you could use the Animation codec with colors set to Millions+ or a TIFF sequence (or PNG), or maybe ProRes 4444, but I don't know if Shake can output to that codec.
    More detail please,
    Patrick

  • We are trying to close caption our telecasts. We get the captioning files done out of house, pull them back into Premiere, and then embed them. The TV station requires .mxf files with the file embedded as a 708 stream, to play on their Grass Valley K2 vid

    We are trying to close caption our telecasts. We get the captioning files done out of house, pull them back into Premiere, and then embed them. The TV station requires .mxf files with the file embedded as a 708 stream, to play on their Grass Valley K2 video servers. We have tried multiple scenarios and cannot get the captions to display.
    Whenever I export, it becomes a 608 stream, and will not play on their servers.

    Hello there,
    I'm sorry to hear you are having a problem. Thank you for taking the time to post here.
    Here are some questions:
    1. What version of PPRO are you using? MAC or WIN?
    2. Is the caption data you are embedding a 708 caption stream?
    3. When you re-import the MXF with captioning embedded back into PPRO, does it show 708 closed captions in PPRO?
    PPRO will embed 708 caption streams to MXF -- I just did this, re-imported the embedded MXF to PPRO, and I see the captions in the MXF.
    If you could share one of your files with me, I could take a look.
    Take care and thanks again,
    CM

  • Importing QT files into FCP

    Hi there I'm a FCP newbie,
    I 'm trying to import QT files into FCP, I extracted two files off a DVD using handbrake tp MP4 format and then opened them with Quicktime Pro and compressed them as a QT.mov. One of the movies imported successfully into FCP the other did'nt, and the error message I file recognized (0) access denied 1 unknown. Note I have used exactly the same compression settings for both files, any help would be appreciated.

    MP4 is a delivery codec. To make things easier, use MPEG Streamclip to do the DVD extraction. That will extract the video directly into a Quicktime movie file which FCP can edit natively.
    MacBook Pro 2.33GHz/2GB RAM/160GB HD/256MB VRAM   Mac OS X (10.4)   Apple Pro Certified, Final Cut Pro 5-Level 1

Maybe you are looking for