Importing manager attribute in FIM

Experts,
I have two tables:-
users:-
employeeid:firstname:lastname:deptnumber
department
deptnumber:deptname:manager
A SQL view combines this two tables and I am importing data through SQL MA and inbound synch rule.
All attributes are coming except manager. I have choose manager as 'Reference' in SQL MA. I am sure employee exists.
All attributes are getting imported except manager.
Thanks,
Mann

Hello,
What is the format of 'manager' in the SQL table 'department'? It's the same that 'employeeid' in the SQl table 'users'?
'Manager' are imported in the CS of SQL and not in MV? Or it's not present in the CS?
And your flow 'manager' is for 'department' object, and not for 'user' object: With you current configuration, you cant' flow manager on user object through inbound synch rule.
Regards,
Sylvain

Similar Messages

Import attributes thru import manager

Hi,
What are are steps to import the attributes and LINK them to records through import manager. Is there some blog or articles refer please. Excel file with supporting different attribute types (numeric,coupled and text) will help along with steps to import the attributes import manager.
Is linking of attributes to records is possible through import manager?
Thanks
Edited by: SDN POWERED on May 21, 2009 9:59 AM

Hi,
In order to work with the Taxonomies, you need to perform the following steps:
1. Import Categories
2. Import Attributes
3. Attributes values.
4. Attribute links
Please refer to the links below to understand the Taxonomy import process step by step:
Master Data Management Import Manager - Taxonomy Data (Splitting Into Hierarchy) u2013 Part 1:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30aa1447-80a1-2a10-e483-a76087bcb12f
Master Data Management Import Manager - Taxonomy Data (Attributes) u2013 Part 2:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6090d0bd-1da7-2a10-468f-bdd17badb396
Master Data Management Import Manager - Taxonomy Data (Attribute Text Values) u2013 Part 3:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8090941f-a5a7-2a10-3ba6-b4af5ec6d97b
Master Data Management Import Manager: Taxonomy Data (Attribute Links), Part 4:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/308c62a2-5faa-2a10-fda6-fa4aa7169734
Hope this helps.
Thanks and Regards
Nitin Jain

Setting up Custom Priorities for Taxonomy Attributes through Import Manager

Hi,
I want to set priority for "n" number of characteristics through Import Manager.
I know Import manager allows us to set priority to one of the following : "Highest" "High" "Normal" "Low" "Lowest". But I have a requirement to set custom priority for each of the attribute through Import manager so as to avoid manual intervention.
Has anybody worked on this before?
Regards,
Amol.

Hi,
Which special properties you are talking about ?
I will just brief you the concepts of Hierarchy and Taxonomy
Hierarchy
Node1
-    Node11
-   Node12
Node2
-    Node21
--         Node211
Only leaf nodes can be assigned at the time of record creation.
Taxonomy
Used when particular hierarchy nodes needs some extra fields.
Example: If your hierarchy is like
Cars
    - Fiat
    - Maruti
Bikes
    - Hero Honda
    - Bajaj
Now for Cars, i want to store its Price but for Bikes i am not interested in Price but I want the Colour info. Now if you create the Price and Colour as fields of the repository then for all the records whose category is Cars will have NULL value for Colour and reverse in case of Bikes. Hence the concept of Taxonomy is introduced so that you can assign the fields (known as attributes) to the Nodes of the hierarchy.
For Taxonomy Import, refer the below links
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30aa1447-80a1-2a10-e483-a76087bcb12f
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6090d0bd-1da7-2a10-468f-bdd17badb396
Regards,
Jitesh Talreja

Sharepoint 2013 Active Directory Import- Manager field not updating

Hi,
SharePoint 2013 Active directory import -Manager field not updating
Concern/Issue-
We are using SharePoint and configured the Active Directory Import .First import it seems everything is working fine and OOB Organization chart built using User profile data is coming out right.
Now the user is moved from one Organization Unit to Another.
Now our Manager field is not Updating .There is change in AD manager attribute but not reflecting in the SharePoint User profile.
Manger field is mapped to "manager" attribute in SharePoint.
We tried removing the user and Re-Import using Incremental import but no luck.
Thanks for help in advance
Sachin

Moving a user from one OU to another in AD won't normally change the Manager attribute in AD. You would need to edit the user's organization settings to change the manager value in AD. I've also seen these changes not be picked up unless something
other than just the manager field in AD changing. Try changing something like Office location and see if the manager change is picked up by AD Import.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Import Manager Match Records question

Hi
I am following the below file
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0a9cee4-9cd1-2a10-62b6-ea2acb06a5a3
Till 5.2 I have done it successfully
while proceeding through the match records
i.e.
In Import Manager, Match Records------> Default Import Action
is not active to create Records
35 of 35 ->None->None--->SKIP (its inactive)
pls check this screen shot
http://www.flickr.com/photos/11212307@N08/2555733854/
why it is inactive , where should I have to check
Any Help pls
Thanks
manian

Hi,
i have got your Problem, you could come to know if you try this
Create an Excel file as below
Category Type Attribute Value
PC Text A 10
PC Text B 11
Now during import this Taxonomy:
First Map your Source Category Field with your Target Name Field when Select Categories as Destination Table
So in MDM Data Manager: when select Categories as destination Table you will GET PC as Value there.
Noe 2nd step Select Categories( Attributes) as your Destination Table here Map Source Attribute and Type Fields with corresponding Target Destination fields.
If you skip this 2nd step and just go for Saelcting Categories(Text Values) as your Destination table , the problem you describe is come into picture.coz that attributes are not available into MDM data Manager.thats why even for Update All Update Options it is showing 0 Record.
Hope it will clear your doubt,
Rewards if useful.....
Mandeep Saini
Edited by: Mandeep Saini on Jun 6, 2008 9:51 AM

Set Key Field in Import Manager

Hi All,
I have 2 fields in my source file(name,category) .category(look up Field) is the key field and name(display Field) is the matching field.
I got file like this......
Name                  category
1                           A
1                           B
1                           C
While importing i got an error stating that Import failed. The destination record was referred to by multiple source records. Duplicate source records should be merged before importing them.
Import action: Update (All Mapped Fields)Source record no: 1
But in this case my key field is Category based on category then these 3 records will be 3 different records.
Please let me know the use of Set Key field in the Import Manager and how it works?

Hi,
It's not about set of key field in MDM Import Manager but the reason is that you can not select more than 1 category(Lookup Taxonomy) in maintable for one record. thats why error is coming because for this Property Multi-valued always No.
Even, you can try this in Data Manager manually create three Category A, B and C in taxonomy mode on selecting Sub table Categories, then on selecting main table, when you select category field(which is lookup to categories table)for a particular record you could able to select only one category A, B or C.
i would suggest make a Attribute of type text having three values A, B and C and mark this as Multi-Valued in Attribute Detail and link this Attribute with your category. in this way you can attach three values A, B and C with your Record.
Other thing you can do,make this category field as (Lookup Hierarchy not lookup taxonomy) in main table to Subtable(Hierarchy) then for this field in main table you can set Property Multi-valued = Yes in MDM console and then after Import using MDM Import Manager finally only one record will get created in Data Manager as:
Name Category
1         A;B;C
Hope it will Help you,
Rewards if Useful.....
Mandeep Saini
Edited by: Mandeep Saini on Jun 20, 2008 8:46 AM

Where to see the standard Maps in import manager ?

hi to all
I am working on MDM 5.5 Import Manager i want to know where exactly we see the standard maps of employee,vendor,product,customer in order to import data from sapR/3 .

thanks rajani for ur help ,i will be glad if u provide me some more information regarding the linkage of Maps with the agency and also Where exactly the Global attributes are maintained is it the console design or in the client.
regards
kanth
Message was edited by: lakshmi kanth
Message was edited by: lakshmi kanth

How to use Destination partitions in Import Manager ..?

Hello everybody,
I am trying to implement example given in latest MDM Import manager reference guide (page no 177). Wherein i have in source file category as
Source___________________Destination
Category_________________Category___Printer type__DPI
300 DPI Laser Printers_______Printers____Laser_______300
300 DPI Inkjet Printers_______Printers____Inkjet_______ 300
600 DPI Dot Matrix Printers___Printers____Dot Matrix___600
Where in destination printer type & DPI are my attributes for category printers.
How can I make use of partition tab to achieve this????
I m unable to get any attribute for partition under Destination Partition pane..

Hi Anton
Format your GM Time source as YYYY:MM:DD:HH:NN:SS:TTT (e.g. 2010:02:19:14:34:28:000). Deviations from this format seem to confuse the IM.
HTH,
Mark

Key Mapping activates Versus Import Manager

Hello,
I have Key mapping activated in the console and Supress Unchaged Records activated in my syndication map.
Case : I import files (suppliers catalogs) to MDM via Import Manager manually. I am not sure about it, but since I activated Key mapping property,
I noticed that for each supplier ID in the Supplier table, a lot of remote keys were created. Previously I only had one remote key for each supplier and now I have a list of other supplier's ID. ( Existent or nonexistent supplier IDs). This becomes an issue for my import, because when I try to import a file where the supplier id does not exist in the MDM ( this scenario used to block my import and this is what a expect, as supplier is a key in my mapping), the system automatically maps that nonexistent supplier to other supplier.
Can you help me to understand if this is caused for the key mapping property ? Any Idea ?
Thank you very much
Luciana.

Hello Stanley,
The remote keys are form the same remote system.
My story is : When I am importing a file , suppose my file has an invalid supplier ID. ( this means this supplier is not in the lookup table Suppliers)
1)The import manager will give me a message such as : Map Supplier ID Values. This behavior was expected.
2)I decided to test the automap. The invalid supplier was not mapped to a different value. I am ok with that.
3)If the user ( dont ask me the reason ;-)) decides to map that invalid supplier ID to a different one, he/she is allowed to do so. I remember when the key mapping was not activated this option did not exist. The map and automap button was deactivated.
What I am trying to make sure is : a remote key will be created for invalid suppliers ONLY if I choose to map it with a different supplier ID.
Do you have any comments about it ?
Thank you very much
Luciana.

How to add hyperlinks in Import Manager

Dear MDM-gurus!
I really tried hard to find the solution, but couldn't find it here or in OSS.
We already have a repository with more than 50.000 items.
What I'd like to do is to add hyperlinks to PDF-files in the internet to each item.
For this we got an excel-file from the supplier with the supplier part number in one column, the PDF-link in another column and the .
In Data Manager I was able to add links manually or also with importing entries of the excel-file. Importing from excel takes a LOT of time. I don' t know why:
- Fields to import: Hyperlinks
- Key fields: Supplier part number.
--> Action: Update all single matches.
How can I import hyperlinks in Import Manager, make the mapping and then update the records faster? E.g. I could not find the field "URL <Hyperlink> [Qual]" in Import Manager
Thanks for your help and best regards,
Henning

Resolved!
I accidently oversaw the URL fields in Import Manager in table catalog items.

Partial match for Value Mapping in Import Manager

Hello Experts,
We have a import map which is used to do mass insert of data into the main table. This is done as & when required by the end user.
We have a qualified lookup field which has a flat lookup filed as the Non-Qualifier. This flat lookup field is refering to a Lookup Flat table, which has mulitple dispay fields like Code,Name, Status etc. (14 fields in total) where as only the Code is the unique field.
We have only the unique field in our source file which we use for the import. Since we have only a part of the display fields in the source, the automap functionality in the Value maping section doesn't work. It becomes very tedious for the user to manually map all the values for this field.
Is there any way by which we can convert the source or target values in the import map, so that we can map the values using the Automap feature?
Your help & suggestion for alternate approach is highly appreciated.
Thanks in advance.
Regards,
Uday
P.S. We are using SAP MDM 5.5 SP6.

Hi Uday,
No need to enable remote key mapping for QLT. Please execute the below steps(stated with an example) -
1. Among all the fields in the referenced lookup table, identify the lookup fields and the tables they are looking up .
For eg.If you have a lookup field as 'Country' as one of the fields, look up table will be 'Countries'
2.For the identified lookup tables, set 'key mapping =Yes' in Console.
For eg, For Country Lookup table ,set Key mapping to 'Yes'
3.Import values into Lookup table (Import manager)/ Remote key update -
In import manager, select source (local file) and destination as Countries flat table.This Table will be haing 2fields - Code and description.Clone the 'Code'field and map it to Remote key field in destination hierarchy.Map code and description to equivalent destination fields. Select 'Code' as matching field > Perform import into lookup table.
Check if the records in countries table are updated with remote keys(in Data manager> right click on a record> select 'Edit key mappings' > view key mapping for the record)
3.Import to Qualified table/Auto value mapping -
Now, in the import map for qualified import , map the source field and destination field (of lookup type), all the values of this field will automatically map.
Similarly, refresh remote keys mappings for all the lookup tables first and then you can see auto mappings of values happening for the lookup fields.
Regards,
Vinay M.S

MDM Import Manager - remove multiple values from a multi valued fiedl

Hi,
We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?
Thanks and regards,
Maria

*We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?*
Hi Maria,
There can be multiple ways to achieve this -
1.After doing field mapping for XPTO you can set conversion filter for each of the values.
2.Value map with NULL.
3.Trigger a Workflow on import/record add,run assignment and make that field NULL.
4.Run mass update for conditional assignment based on that value of XPTO.
There can be more ways,whichever suits you best you can go ahead with that.
Hope it helped
Regards,
Ravi

Importing text file (delimited, fixed width) with MDM Import Manager?

Hello all,
According to the overview section of the import manager reference guide, it is possible to import from delimited text files (e.g. CSV).
But when it comes to the details, text files are not mentioned anymore. I also found no option in the Import Manager.
Could you tell me whether this is possible and - if it is - how?
Thanks in advance!
Kind regards,
Dennis

Hi Dennis,
In order to import flat files into MDM do the following. This solution is specific to MS Windows:
I. Set up ODBC for *.txt or *.csv files
1. Open Data Sources (ODBC) interface:
Start> Settings> Control Panel--> Administrative Tools -->Data Sources (ODBC).
2. Select System DSN Tab in Data Sources (ODBC) interface.
3. Click on [Add]. Select the Microsoft Text Driver. Click Finish.
4. Write a Data Source Name
5. Uncheck Use Current Directory to enable the [Select Directory] button.
6. Click on [Select directory] to determine the source directory.
7. Select the source file.
8. Click [OK] and return to the ODBC Text Setup screen.
9. Click [OK].
10. Return to the ODBC Data Source Administrator dialog and click [OK].
II. Importing from Flat file
1. Run MDM Import Manager.
2. Select ODBC from the Type drop-down field of the Connect To Source dialog.
3. Enter the DSN name from the Setup ODBC Connection dialog above.
4. Select the file name with extension (.csv or .txt) in the Tables panel of MDM Import Manager and the file content in the Records panel.
Hope this solved your problem.Please mark helpful answers
Regards,
Santosh.

Value Mapping in Import Manager

Hi All,
I have Probelm while loading data to MAIN TABLE through Import manager,I am getting XML file from Legacy System in which legacy sends State Code like NM (for New Mexico) .In my region table I made Name and Code as display field .Created my Import map ,when ever new value comes for region value mapping is not working ,I tried changing my region table with code only display field it works ,but I want Name also display field .
Note : all my lookup table Remote key mapping Enabled
Is there any way we can acheive this or am I missing some thing here .
Thanks,
Madhu

Hi Madhu,
to achive this:
1. First go to the table where you are maintaining the region codes.
2. Enter the region code there and then go to the import manager by connecting to the source file.
3. go the region field map by opening the map.
4. go to value mapping pane and select unmap.
5. then select Automap and check the that your region code added manually is mapped with the source file.
6. You may see some unmapped source values, map it to Null values at destination.
7. Save the map.
8. This shoul enable the import for you.
if you want to avoid the manual mapping everytime, you should be getting all the region codes once and import/update it in the data manager as a one time job.
Then you avoid steps 1 to 3 everytime and carry out the remaining steps to import the records.
Hope this helps resolve the issue.
Thanks
Rahul

Not able to Populate Qualified Table in Import Manager

Hi,
I am performing following steps for populating Bank Detail Qualified table in MDM from R3 but not able to populate the data.
1.Populating all lookup tables like Account_no,Bank-Key.......
2.Mapping all fields in Bank detail table except the 'Collect Auth'
field which is Qualifier
3.In Customer table(Main) mapping Collect auth to Bank Detail field and
customer_no to its corresponding ID.
It is not populating the Bank detail data which are available in lookup tables
Appreciate your suggestion
-regards,
reo

Reo
Matching will be based on the Display field (at least one) of the Main table. This is for example the Customer Number.
You also need to map all the display fields of the qualified lookup table. Then you can set the Qualified Update Action by right clicking on the field in the main that is linked to the qualified lookup.(the Collection_Authorization I think). Set the option that well update/append/replace the qualified data fields of the looked table.
There is two how_to_guides that will help. You can download from SAP Service Market Place. (Otherwise I can email to you)
How To Troubleshoot MDM Import Manager
HowTo_LoadQualifiedFields
Rgs
Con

Importing manager attribute in FIM

Similar Messages

Maybe you are looking for