Imports not recognised

I'm new to using Sun One Studio 5. Having problems with import statements in example source I've mounted to the file system. All are showing as not existing, i.e. when I compile the MIDlet, I get compilation errors:
package javax.microedition.lcdui does not exist
package javax.microedition.midlet does not exist
The example source is only improting lcdui and midlet packages.
How can I fix this.

Hi ,
I am assuming you are using studio5 SE
You need to mount the jar/zip file containing the midp classes to have them in your classpath.
The file name is midpapi.zip located in the lib of
J2ME Wireless Toolkit .Then you have to set the compiler as preverify
Easy way to run MIDP application would be to use either use studio 5 Mobile edition which is available for download at http://wwws.sun.com/software/sundev/jde/studio_me/early_access.html
or upgrade your studio standard edition to mobile edition using update center
Refer article,
http://developers.sun.com/tools/javatools/documentation/s1s5/mobilequote.html for how to get this modules from update center.
-Amol

Similar Messages

  • HT1567 Itunes 10.6.1.7 is not recognising an Audio CD when inserted in the drive. This means I connot import any CD's. What could be wrong?

    iTunes 10.6.1.7 is not recognising an audio CD when inserted in the drive. This means that I cannot import CD's. It used to work but since installing other software iTunes does not see the audio CD and will not open the drive when "eject disc" is selected from the controls menu.

    Check the drive letter of your CD drive.  iTunes doesn't seem to work properly with CD drives if they are mapped to the letters A or B.  Use Disk Management tool in windows to change to a different letter and this will fix it (if this is the cause!).

  • Importing video from Sony HDR-CX410 FCP 6.0.6 will not recognise AVCHD files. what is the solution?

    First I have to admit I'm not technical in any way so I'm easily confused so please forgive me if my question sounds unprofessional.
    The computer is a Mac desk top tower with Lion OS x 2x2.66 GHz Dual-Core Intel Xeon with an  internal hard drive plus a number of remote hard drives.
    I'm using Final cut pro 6.0.6 to edit video.
    The question is, up until now I've been using material shot on mini DV tapes, then digitised into the computer via the camera. As this format is getting long in the tooth I decided to get one of the latest DVCAM cameras, I went for the Sony HDR-CX410.
    It was not until I had purchased the camera & shot a few test seq. & then tried to down load into the computer that I found out that Final cut does not recognise the AVCHD files on the SD card.I've tried importing from the camera as well as a card reader with no result.
    I've looked at a number of sites including Apple support community where it looks like this is a major issue for many people but I can't find anyone who is using the same camera. I wondered if this issue is something you have covered in the magazine, if so please let me know which copy, if not can you help in any way. It appears that Final cut proX may be able to translate the AVCHD files but I'm not sure. Am I right in thinking that if I do upgrade to FCPX I will still have to convert the files, if so would you recommend a suitable software program.  Is there any reason why Apple make it so difficult to edit this AVCHD format when all the latest cameras are using it, perhaps its time to change back to a PC?

    Eric,
    FCP 6.0.2 (compared to previous version) comes with the latest improvement and support for AVCHD.
    However, here is a suggestion:
    In Log&Transfer (top frame) on the right of *search field* there are three buttons, click on the one showing a little arrow-down and a sort of little star. Choose preferences then in the *transcode to* section click on those two tiny arrows pointing one up and the other down and choose Apple Intermediate Codec. Can you now transfer? (Add selection to queue)
    Once again 6.0.2 might provide better support for your camera.
    Use the search tool for more info.
    G.
    PS. Please note that some people have had problems with 6.0.2 so get us much info as you can before updating.

  • I have just updated to LR5.  I also have a new Camera.  Nikon D800.  Trying to import directly (from camera) into LR.  But unsuccessful. Getting the following message.  "The files are from a camera which is not recognised by the raw format support in Ligh

    I have just updated to LR5.  I also have a new Camera.  Nikon D800.  Trying to import directly (from camera) into LR.  But unsuccessful. Getting the following message.  "The files are from a camera which is not recognised by the raw format support in Lightroom."  How can I import please?

    Hi,
    I assume you mean the Nikon D810 because D800/800E support has been there since Lightroom 4.1
    Currently, because it is a new camera (D810) the only support is in a RC of ACR 8.6 for Photoshop CS6 and CC, as the RC runs out on 31 August it is expected support will be there in the next dot release of Lightroom.
    Current limitations are that only full sized NEF is supported.
    If you wish to import to Lightroom 5.5. you will need to download the DNG Converter v8.6RC and convert the NEF files (full size RAW ony) to DNG then import into Lightroom 5.5

  • LR4 import dialogue box does not recognise duplicates (and then it does)

    I have a strange problem. Since I upgraded my LR3 catalog to LR4 I have had trouble with the import dialogue box not recognising duplicates and thumbnails but if I cancel the import and try again it all seems to work.
    The problem: I have the ‘Don’t import suspected duplicates’ option selected on the import dialogue however when I open the dialog box any duplicates on the memory card are still shown and often the thumbnails only show for the first 20 – 50 photos.  When you cancel the import and open the dialogue box again the thumbnail images start popping up and all of the duplicates start disappearing from the dialogue box until they are all gone.
    The situation: I am using a retina MacBook Pro running the latest version of OSX, although the problem first started when LR4 was released and I was running it on a c. 2008 Core 2 Duo MacBook Pro. I import a range of files from iPhone photos through to Canon 5D Mk III photos using a CF/SD card reader as well as plugging straight in to the iPhones with a USB cable.  My catalog is currently sitting at around 70,000 photos.
    When I got the new retina MacBook Pro and first installed LR4 I copied across my catalog files and photos etc and this problem did not exist.  It started happening again after I copied across all of the hidden system files (presets, keywords, preferences etc.)
    Any ideas much appreciated.
    Thanks
    Nigel.

    Hi Pitmonkey,
    Welcome to the Apple Support Communities!
    If you are having issues with your iMac automatically ejecting disks, I would suggest reading over and following the troubleshooting steps in the following article. I know there are references to an external SuperDrive but the troubleshooting is for built in SuperDrives as well.
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Accepts discs but they don't mount or are automatically ejected
    Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
    Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
    Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
    Reset the System Management Controller (SMC).
    Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
    OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
    OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
    If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
    Have a great day,
    Joe

  • How do I import from my Sony Z5, FCPX and iMovie do not recognise the file format?

    How do I import from my Sony Z5, FCPX and iMovie do not recognise the file format?

    GR-Blitz,
    You can see a few ways of doing it in this thread:
    https://forums.adobe.com/message/6474423#6474423

  • Windows Vista - iTunes not recognising iPod!

    iTunes is not recognising my iPod and the iPod Setup Assistant isn't showing automatically. Can anyone help. I have a new laptop with Window Vista is this operating system the problem? Can help would be appreciated. I can import music into iTunes OK and purchase music from iTunes itself I just can't get iTunes to recognise my iPod!

    > Step 3:Download and install the latest chipset drivers from the laptop manufacturers website.
    >*So here I am with the issue still not resolved. How do i Download and install the latest chipset drivers >in order to have Toshiba Satellite L300 & Microsoft Vista recognise my ipod?
    Install an hardware diagnostic tool like Everest home Edit or similar.
    This tool would provide all hardware details about your notebook.
    It would list all devices and chipset name too.
    I think its Intel chipset so you could find the driver on the Intel page
    Greets

  • Itunes not recognising my library even though I transferred my library from another mac

    Hello.  Transferring over to an MBA from a MBP.  I followed the instructions and copied the itunes folder from my MBP (itunes 11.1.1) to an external hard drive after consolidating it.
    On my MBA I removed the itunes folder it came with and replaced it with the folder from my external hard drive (itunes 11.0.3). However, iTunes is not recognising any of the music!  I really want to import all my ratings and playlists so am keen for this to work.
    I've done it before and it worked just fine.  What am I doing wrong?
    Thanks in advance.

    Oh, yeah, it is confusing. The Purchased option on the Sidebar only shows purchases actually made on the computer you are using at the time you click on the Purchased option. The Purchased option under Quick Links shows you all purchases made under the Apple ID that is signed on.
    I wish they would change the name of one or the other so they would be distinctive from one another - even Purchased vs. Purchases would be better than using the exact same word!
    Cheers,
    GB

  • File may be corrupt ore not recognised by Powerpoint

    My bosses powerbook, suddenly does not want to let him move some pictures from iphoto into powerpoint or word. It comes up with the message
    'The file may be corrupt, in use, or of a type not recognised by Powerpoint'.
    This is even on pictures that previously could be moved over ok. a number of pictures are ok, but new ones, which are from a new camera (none of these work), and some of the old ones don't transfer. I can look at all the the pictures ok in iphoto, preview, but can't in Office. If I open a problematic picture in Preview, and then 'save as' and overright the existing picture, then it will import it into Office programmes ok.
    Has anyone else encountered something similar? Help!
    I'm using Office X version 10.1.6
    Justyn

    I don't think it's a permissions issue or you'd get a different message but try manually reset the ownership and permissions for the iPhoto Library folder as follows:
    Setting Permissions for iPhoto Library Folder
    1 - Select the iPhoto Library folder and type Command-I.
    2 - When the Info window comes up go to the Ownership and Permissions section and make sure You have Read & Write permission and that the Owner and Group have Read & Write also. Others - Read Only.
    3 - Then click on the "Apply to enclosed items..." button.
    When you export a photo to the desktop can it be move it from there OK? Move one to the desktop and bring up the Info pane on it, Command-I. Then under "Open with" set Preview as the default application. Then click on the "Change all" button. Good luck.

  • Adobe Media Encoder CC 2014 not recognising opacity/alpha values from After Effects

    Hello, I'm importing AE compositions directly into Media Encoder to output as 'Match Source - Medium Bitrate H.264' files. However Media Encoder is not recognising the opacity values of the layers in AE and the background images are coming out as opaque rather than partially transparent.
    How can I resolve this? If I render the movie from AE as a .mov then use Media Encoder it works fine, but that takes a lot more time.

    Can you post screenshots of your comp in After Effects and the result you are getting from AME?
    One issue you may be hitting is that AME is not aware of the composition background color. This is a limitation of Dynamic Link; because a primary use case of Dynamic Link is placing an After Effects composition, such as lower-thirds titles, into a Premiere Pro sequence, Dynamic Link ignores the background color of the composition and treats any the background pixels as alpha. In AME, since there is no compositing happening, black is used to fill in the alpha area.
    To work around this limitation, place a solid at the bottom of your composition layer stack that is the color of your background.
    You're welcome to submit this problem as a feature request: http://adobe.ly/feature_request

  • Offline install of Windows 7 SP1 not recognised by Windows Update

    Hi
    I have asked this question over at the Windows Community forum, and someone suggested that I ask here.
    This question regards Windows 7 and Service pack 1
    I bought a couple of new computers, and decided to use the offline SP1 installation on each to get the computers up to date when I first configured them.
    So I downloaded the offline update iso from Microsoft, created a DVD and installed SP1.
    After configuring my computer, I then connected windows update to get all fixes etc since SP1.
    To my dismay windows update has presented me with a list of *all* updates, including SP1.
    Is there any way of getting Windows update to recognise the fact that I already have SP1 installed?
    Further info:
    This is the procedure I went through.
    1) Built the computers
    2) Installed Windows 7
    3) Installed hardware device drivers
    4) Installed SP1 from DVD
    5) Connected to the internet
    6) Activated Windows
    7) Used Windows Update
    8) Installed the fix/patch required for windows update to work
    9) re-connected to windows update
    10) Was dismayed at the list of fixes requiring download. (around 148)
    After going through the process of downloading the updates, at around the time of the second re-boot, the list of updates included Service Pack 1.
    AV Software was going to be the next thing to install, after the computer was *fully* patched
    Further Further informatio :)
    I have since gone ahead and installed Windows on my second computer.
    I'm still interested in finding a solution for future reference.
    After installing Windows7 and applying the offline SP1 update, I checked to see what updates were installed before
    activation and connecting to windows update.
    These are the updates listed.
    1) Service Pack 1 for Windows 7 (KB976902)
    2) Update for MS Windows (KB976902)
    3) User Mode Driver framework V1.11 (KB2685813)
    4) KB958488 (the list just haqd the kb number, no title)
    5) Hot Fix for Windows (KB2505454)
    My original question, and the answers/feedback can be viewed at the following page:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/offline-install-of-windows-7-sp1-not-recognised-by/e8ab61d0-8669-4297-acfd-4acc0da8c1dc?rtAction=1427893878897
    Cheers...
    Daz

    Hi Daz,
    You mentioned that the SP1 prompted again in the needed updates, I suspect that that is not the full service pack, it is only some changes to existing non-security content, appropriate 10 MB size. you can check the size of the update to confirm
    this.
    See more information in this link
    http://support.microsoft.com/en-us/kb/894199
    And after you have manually installed the updates offline, have you checked whether these updates are listed in the "installed updates", or in Update history? And you can check the new detected updates, whether they have been successfully installed
    in your system. Meanwhile, when you check for updates online, please check your Windows Update settings, we recommend you to check for important updates, not optional updates or hotfix. You can install the optional update or hotfix when you need it in the
    future.
    Regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr. Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and theref

    Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
    Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.

    Hi Elba,
    Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
    I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
    I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
    The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
    If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
    Completely baffled by it. Any idea what could be the reason?
    Kind regards,
    Nik

  • Itunes does not recognise CDs................please help

    i've had my ipod for a few months now and it hasnt been a problem before as it has always imported CDs fine onto my ipod but recently whenever i insert a CD into the drive itunes does not recognise that i have put a CD in and it cant be the CDs that i put in as i have leant one of them to my friend and she said its worked fine on her itunes, when i insert the CD and go onto run CD diagnostics this comes up,
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    FUJITSU SIEMENS P5SD1-FM2
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce 6200SE TurboCache(TM)\GeForce 6200SE TurboCache(TM)
    IDE\DiskST3160023AS____________________________3.00___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STDVDRRW_GWA-4164B_______________1.03___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: HL-DT-ST DVDRRW GWA-4164B, Rev 1.03
    Drive is empty.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVDRRW GWA-4164B on -128(0xffffff80) media at speed 0X.
    i dont even understand what this means, please help!!!!!!!!!!!! thanx xxxx

    Well the report just tells basics of your setup and errors going on in short. Error -128 means either you or iTUnes cancelled the burn before it even started.
    Your issue tho is you have no lower filter. you should have 2, and upper filter and a lower filter. Now Im not that good with the filter thing just yet, but I think if you reinstall itunes it will install the lower filter you need.
    You will want to remove itunes AND quicktime in the control panel>Add/remove. Dis able any antivirus/security programs so they do not interferr with iTUnes and then download and install the latest iTunes from www.apple.com

  • IPhone "Usb Not Recognised"

    Hi, I know there have been loads of similar questions since the iOS 5 and Itunes 10.6 update. I recently got a new laptop and have tried to plug my iPhone in for the first time yet a "Usb Device is not Recognised" keeps showing up. My iPhone does not show up in iTunes or on My Computer. I have tried and followed almost every trouble shooter including:
    http://support.apple.com/kb/TS1538 ( Please so not give me this link, I have tried every step on it about 500 times =.=)
    http://http://support.apple.com/kb/HT2292
    iTune's Diagnostics (which have lead me back to the links above)
    Selective Startup only having iTunes start up.
    Restarting my laptop.
    Making a new "Inbound Rule" through Windows Firewall for iTunes.
    Checked my USB cable etc.
    Getting recognised as a Camera
    Uninstalled and reinstalled iTunes + everything published by Apple Inc.
    Deleted everything under the Universal Serial Bus Controllers, restarted my laptop so that it reinstalled them then plugged in my iPhone.
    I've stopped the Apple Mobile Device service, plugged my iPhone in, then restarted the service.  The same message pops up.
    I'm pretty confident it is a problem to do with my iPhone 3G as I have tried it on multiple different computers with different Apple USB cords and it has always come up with the same message.
    Specs:
    Apple product: iPhone 3G with latest iOS 5 and updates.
    Latest iTunes 10.6 installed.
    Laptop: Asus K53SC-SX404V Notebook Exclusive.
    Windows 7. 64-bit Operating System.
    Here are the iTunes Diagnostic Results (if it helps...):
      Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    ASUSTeK Computer Inc. K53SC
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0046AB5C0354A050
    Current user is not an administrator.
    The current local date and time is 2012-04-29 14:16:06.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 520MX
    Intel Corporation, Intel(R) HD Graphics 3000
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name: {2FC96DF7-09B3-4385-937B-966ED616A137}
    Description: Microsoft Virtual WiFi Miniport Adapter #2
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: No
    DHCP Server:
    Lease Obtained: Thu Jan 01 08:00:00 1970
    Lease Expires: Thu Jan 01 08:00:00 1970
    DNS Servers:
    Adapter Name: {26C1D8D9-0486-4280-97FC-BEE3F1474D08}
    Description: Microsoft Virtual WiFi Miniport Adapter
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 08:00:00 1970
    Lease Expires: Thu Jan 01 08:00:00 1970
    DNS Servers:
    Adapter Name: {91885DCE-7B8D-4E74-89E9-236AF72A3AB8}
    Description: Intel(R) Centrino(R) Wireless-N 100
    IP Address: 10.0.0.5
    Subnet Mask: 255.255.255.0
    Default Gateway: 10.0.0.138
    DHCP Enabled: Yes
    DHCP Server: 10.0.0.138
    Lease Obtained: Sun Apr 29 13:19:36 2012
    Lease Expires: Mon Apr 30 13:19:36 2012
    DNS Servers: 10.0.0.138
    Adapter Name: {BE6830F2-7E40-4774-889A-CE48BE410AF4}
    Description: Realtek PCIe GBE Family Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 08:00:00 1970
    Lease Expires: Thu Jan 01 08:00:00 1970
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-04-29 14:15:29.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    E: Slimtype DVD A DS8A5SH, Rev XAA2
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.1.7 (x64) is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    ASMedia XHCI Controller. Device is working properly.
    Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26. Device is working properly.
    Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPhone 3GS running firmware version 5.1
    Serial Number: 860406RUEDG
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I have also found in my iTunes diagnostics log above ^^ it says that iTunes is not enabled by Windows Firewall, even though I have it enabled and followed http://support.apple.com/kb/HT2553 to enable it and the iTunes box was already checked. However, I do have 3rd party Antivirus software running (Norton Internet Security) Could this be conflicting with windows firewall? If so, how do I turn off the firewall in the Norton program so that it stops conflicting with it.
    And if this is relevant, I also found that
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Is is this important?
    Thanks in advance.

  • Jrun 4.x with jdk 1.4 in eclipse java page not recognising from jsp call

    hi all,
    I have developed 1 web app. which includes JRUN 4.x, eclipse 6.6 and jdk 1.4.
    I have deployed the app. in IIS server also. and in config tool also.
    But when i run the application, it is not recognising the java page so, it is giving an error.
    it is sample page i am sending.
    i called the bean page directly also, but still same problem.
    my appl. strutucture
    ==============
    webRoot : test.jsp
    src : testbean.java
    test.jsp
    =====
    <%@ page language="java" import="java.util.*,testpack.*" %>
    <%!
    testbean test1 = new testbean();
    %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html>
    <head>
    </head>
    <body>
    This is my JSP page. <br>
    <%
    String s=test1.test();
    out.println("testing string="+s);
    %>
    </body>
    </html>
    java page
    ======
    package testpack;
    public class testbean {
         public String test(){
    return "test sucess";
    error
    ===
    500
    Translator.CompilationFailedExceptionCompiler errors:
    Found 1 semantic error compiling "C:/JRun4/servers/default/default-ear/default-war/WEB-INF/jsp/jrun__test2ejsp9.java":
    6. import testpack.*;
    <------>
    *** Error: Could not find package "testpack" in:
    C:\JRun4\servers\default\default-ear\default-war
    C:\JRun4\servers\default\default-ear\default-ejb
    C:\JRun4
    C:\JRun4\servers\default
    C:\j2sdk1.4.1_02\lib\tools.jar
    C:\JRun4\lib\jrun.jar
    C:\JRun4\lib\webservices.jar
    C:\JRun4\lib\macromedia_drivers.jar
    C:\JRun4\lib\mysql-connector-java-commercial-5.0.5-bin.jar
    C:\JRun4\lib\java2wsdl.jar
    C:\JRun4\lib\jrun-xdoclet.jar
    C:\JRun4\lib\jrun-ant-tasks.jar
    C:\JRun4\lib\jrunwizard.jar
    C:\JRun4\lib\jrunwizard-installer.jar
    C:\JRun4\lib\jspc.jar
    C:\JRun4\lib\migrate.jar
    C:\JRun4\lib\oem-xdoclet.jar

    On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
    > hi
    > [snip]
    > [root@p22 eclipse]# cat eclipse.ini -startup
    > plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
    > --launcher.library
    > plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
    >
    > -showsplash
    > org.eclipse.platform
    > --launcher.XXMaxPermSize
    > 256m
    > --launcher.defaultAction
    > openFile
    > -vmargs
    > -Xms40m
    > -Xmx512m
    > [snip]
    Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
    sticky posts at forum's top for getting started help.

Maybe you are looking for