Impossible to save or send my Quickoffice Pro documents

Hi!
I have a big problem for to save or send my Quickoffice Pro documents.
I had been using with no problem this program in the last two years, with a old IOs version in my Ipad 2 (6.x.x)
I had actualize my IOS to 8.1.3 and after this moment I can´t save, send or do nothing in this program because it closes in the moment I do something with it.
I had been looking for a solution and I had found that the App Store has retired this program (buyed for Google), then I can,t ask for the App support.
Please, tell me a solution if somebody knows because I had a lot of works and information in this doccuments that I can,t lost.
Reagards

It would seem the app is no longer supported. Contact Google since they purchased the app to find out its current status. There may be a new app the reads/writes that file type. Or you might have to move to a different app.

Similar Messages

I am receiving an error message every time I try to save files using QuickOffice Pro. Any advice on what I might be doing wrong?

I am receiving an error message that it is unable to save my file everytime I try to save a file using QuickOffice Pro on my iPad. It seems like I must have missed a setting or something someplace but I can't figure it out.
Any advice?
Thanks!

Make sure that the network.protocol-handler.external.javascript has the default value (false).
*about:config page: network.protocol-handler.external.javascript = false
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Operation Not Allowed When Sending to Soundtrack Pro

Hi
I have a problem with FCP. I have a clip named
main service.dv
When i try to Send To > Soundtrack Pro Audio Project, in the Save dialog, i tick Send only referenced media, and latest metadata... but when i hit Save, an "Operation not allowed" dialog appears. The file is saved, and I can open it in Soundtrack Pro, but its not associated back with FCP.
Thanks.
Joe

Joe Coyle wrote:
The footage was already captured before coming to me. I have nearly completed my project, now just needed STP to get rid of an electrical buzz on a clip.
It's still a bad workflow by definition, "operation not allowed" means you canto proceed without some kind of workaround. You do not need STP to remove a simple 60Hz. But you will need advanced audio processing tools to augment the 60Hz removal if the rest fo the track has lots of content in that freq.
bogiesan

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created". What's the problem?

Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created".
What's the problem?
Any help in finding a solution is greatly appreciated.
Thank you,

Installed AcrobatXI PRO 11.0.09 on seven computers and laptops. Two of them gives an error when you try to save a document in WORD, EXCEL, Power Point, or when exporting to... error: Save failed to process this document. No File was created.
But all good saves in the format of TXT and jpg.
I have uninstalled and restored and re-installed and updated and registry cleaned and removed using the special utility Cleaner Tool for Acrobat, but nothing helps.
On one notebook with Windows 8.1 and Microsoft office 2013, on another laptop with Windows 7 and Microsoft office 2010, the same problem, although there are computers with Windows 7 and Microsoft office 2010 and everything works.
Tell me where to find the problem and how to solve it.
Thank you.

Save and Send to Sharepoint error

I'm using Microsoft Word 2010 and a sharepoint 2010 site.
And I'm having troubles with file locations when saving files back to sharepoint library.
First, when I open a file from sharepoint site, edit and try to save, the default location is not the location of the library the file was at.
If I try to do 'File>Save and Send> Save to Sharepoint' and select a recent location,
or if I click onfind location, I get the following error message:
Could not Find http://xxxxx.xxx/DocumentLibraryA/FolderA
The only way I'm able to save is via 'File>Save as' and input the url on
the file name field.
This issue is not happening with every computer I try to open files from sharepoint. On some other computers, I am able to open the file from the library and it comes with the default location, and if I do 'File>Save
and Send> Save to Sharepoint', it opens normaly.
Does anyone knows how to fix this?

Hi,
Please try to add the "Desktop Experience" feature in your computer.
Go to All Programs –> Administrative Tools –> Server Manager. Choose Features –> Add Features
Next, check the "Desktop Experience" feature. On the popup, choose "Add Required Features".
More informaiton is here:
http://petervdberg.blogspot.com/2011/01/how-to-enable-save-and-send-option-in.html
Best Regards
Dennis Guo
TechNet Community Support

Email Security Plug-in - Doesn't seem to work with right click or save and send

I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
Starla

Andreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Added Devices' section. 2. Selecting any task specific product
   selector and clicking on 'My Added
    Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
         User ID (Cisco.com ID used to download software)
         Contact Name
         Company Name
         Contract Number
         Product ID
         Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

In our application we have CV Builder and after submit we want to show in pdf format. and also we want save and send option.

In our application we have CV Builder and after submit we want to show in pdf format. and also we want save and send option.

1. For the PDF see TCPDF
2. For saving see PHP Insert Data Into MySQL
3. For sending see Basic PHP mail() Function code to send emails from a form | InMotion Hosting

I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?

I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?

pammyjoh wrote:
I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?
"Are there recovery disks for my system?"
Don't know. You have not told us what system you have.

Send to Soundtrack Pro Multitrack Project - All I get are empty tracks

I have a sequence in Final Cut Pro that has a collection of clips and sequences inside of it. When I right click the sequence in the browser and select Send To -> Soundtrack Pro Multitrack project, it opens STP as it should. When STP opens, though, I have a correct video track, but all of the audio tracks are completely empty.
Am I doing something wrong here?

select the sequence in the browser and then send to STP
make sure the in & out are set correctly on the timeline

Validation at "Save and Send for approval" in Create Expense Report

Hello gurus,
I have an issue where in at Create Expense report we have two options:
1. Save
2. Save and Send for Approval.
When this trip is SAVED and SEND FOR APPROVAL the validation should trigger and error message should appear if expense type XXXX is used in any of the line item of the trip.
I have been told that this can be done by user exit at the backend level. But, at the frontend we will have to make some changes as well.
I know WD JAVA, but a little short on knowledge in WD ABAP.
Could you please help me by telling me as to how to do a validation in this scenario or even if its necessary to do it ?? I mean, is it possible that the backend validation will hold true if someone will create a expense report from the frontend as well ??
Please explain me ...

Hello friend,
Its easy to handle this problem,
To know how you can use the message effectively see this details about the interface,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/6c/7aae42cd7fb611e10000000a155106/content.htm
For clear understanding about the steps for creating messages see the code below,
http://e-university.wisdomjobs.com/sap-abap-web-dynpro/chapter-105-274/messages-exceptions-and-web-dynpro-abap.html
I think you will be clear after reading this code. Any queries please revert back to me.
Thanks,
Sri Hari

No Video when using the "Send To Soundtrack Pro Audio File" Command

Hello FCP Users,
After reading and rereading the FCP and STP manuals and scouring the boards; I still can not figure out how to view my video clip while I'm editing/sweetening audio in STP. I have even used the DVD tutorial in an attempt to figure it out (all works fine and good with the tutorial example), but I'm stuck here the real world.
I'm thinking their must be some preference setting somewhere in STP that I've missed. Any suggestions would be greatly appreciated!!!
Best regards,
Jeff
From the Manual:
Soundtrack Pro creates a new audio file project (with the file type .stap) for the clip. The clip can contain video and audio or contain only audio.
In the Final Cut Pro Timeline, Control-click the clip, then choose “Send To >
Soundtrack Pro Audio File Project” from the shortcut menu."
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.9)

Rob,
The audio consists of two separate audio tracks A1 is from a lav mic and A2 is from an on-camera mic.
It was captured DV.
If I rt click the video clip in the "video tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
I've tried de-selecting the "linked selection" in the tl and rt click the audio clip in the "audio tl" and that allows me to "Send To Soundtrack Pro Audio File" , but no video in the utility window of STP.
If I select the "linked selection" in the tl and rt click the audio clip in the "audio tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
It looked all so simple in the tutorial. I'm going on five hours of trying to find an answer to this issue any other suggestions before I slit my wrists? Thanks for your input.
Jeff
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.8)

Impossible to save an image in applet?

I have been working on saving an image in Java applet for a week. But I failed to generate new image file on the disk. I'm using Java SDK1.4.0_03 and JAI 1_1_1_01. I found a topic "JAI TIFF Encoding Problem" mentioned that it should give permission to the Applet. I'm wondering if my problem is caused by the permission of Applet. But how to change the permissio of Applet? Otherwise is it impossible to save the image in Applet? Thanks your replay.

Re : Thanks your replay.
I have been working on saving an image in Java applet
for a week. But I failed to generate new image file on
the disk. I'm using Java SDK1.4.0_03 and JAI 1_1_1_01.
I found a topic "JAI TIFF Encoding Problem" mentioned
that it should give permission to the Applet. I'm
wondering if my problem is caused by the permission of
Applet. But how to change the permissio of Applet?
Otherwise is it impossible to save the image in
Applet? Thanks your replay. You're welcome :)

QuickOffice Pro fails to Install on Symbian Anna

I have a Nokia N8 with Symbian Anna. I purchased QuickOffice Pro from Ovi Store and it downloads but then fails to install. The trial version from the QuickOffice site also fails to install. Before I purchased QuickOffice I deleted the version of QuickOffice that came with Symbian Anna.
Now I am left with no QuickOffice even though I have paid for it.
Can someone suggest what I should do so I can install the QuickOffice Pro that I have paid for.
Jen
Solved!
Go to Solution.

I emailed quickoffice tech support and they gave me a solution that works.
My unit is a C6-01 that I recently updated (successfully) to symbian anna including the 2 updates that came later.
Here's how I did it as per their advice:
Before you start, download the .sis file for the quickoffice pro version 7 (39) that you purchased from Quickoffice. You will use this later.
1. backup your phone using nokia ovi suite, if you want to shorten this, backup only the important data like phone contacts, device settings, applications settings, calender etc. You can do away with the backup of music, picture and video files as those take time.
2. reset your device as follows which I quote " At the main screen, enter *#7370# – The default lock code is 12345. This will restore the device to its original state, removing all user data, contacts, and third-party applications you may have installed."
this will tell you that the reset will also erase the contents of your memory card, if you dont want your memory card erased, remove it before resetting, then proceed to resetting. If you have entered your own lock code, use that instead of the default lock code 12345.
after you enter the lock code, the phone will shut down and reboot with a white screen only. Wait for it to compelete as it takes some time.
3. After the resetting is complete, all softwares that you installed will be temporarily gone (since you took out the memory card) but you can recover it later.
4. connect your cell to your PC and use Nokia Ovi suiet to install the Quickoffice pro 7 that you downloaded.
this should install the quickoffice pro successfully.
Check if the quickoffice pro is working.
5.then re-install your memory card which you removed in step 2. The restore the contents of your phone using OVI suite.
6. Finally, update your phone software using ovisuite. It will say that it has 2 or 3 updates pending. Just proceed with the update since that update will not erase the quickoffice pro that is already installed.
that's it. you should have a working copy of QUickoffice pro 7.
PLEASE TAKE NOTE: This worked on my Nokia C6-01 updated to Symbian Anna. I cannot speak for other nokia models.
I hope this helps.

Impossible to save reduction of red eye

Last Saturday I installed iLife 05 in my mac and I checked the program discovering it was impossible to save the reduction of red eye: I could edit the photo and apparently the program saved the changes, but when I re opened the photo the reduction of red eye was missing.
After an advise of this forum I checked that the files of the photos I edited were unlocked.
Could it be a problem of configuration hardware of my mac?
Or could it be a problem related to my digital camera (Pentax Optio 330 GS)?
If it is a problem of configuration, how can I remove iPhoto 5 and return to iPhoto 4 that have always worked well?
Thanks in advance for your help!
Antonino

Antonino,
Have you checked to see if any other graphic program can remove the red eye first? If another graphic program cannot remove the red eye, then it would point to the camera or the files the camera produces. I am sure someone here will check for you if you don't have another graphic program.
Now after you have done that and still want to return to iPhoto 4, here are the instructions.
Revert to an older version of iPhoto

Impossible to save or send my Quickoffice Pro documents

Similar Messages

Maybe you are looking for